@@ -112,6 +112,15 @@ extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
int assignment, int has_irq);
extern int par_io_data_set(u8 port, u8 pin, u8 val);
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
enum qe_clock qe_clock_source(const char *source);
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -24,8 +25,14 @@ struct qe_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
/* shadowed data register to clear/set bits safely */
u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
};
static inline struct qe_gpio_chip *
@@ -40,6 +47,12 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
struct qe_pio_regs __iomem *regs = mm_gc->regs;
qe_gc->cpdata = in_be32(®s->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
}
static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -103,6 +116,188 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
return 0;
}
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ int size;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (err) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
+ goto err0;
+ }
+
+ if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ err = -EINVAL;
+ goto err1;
+ }
+
+ err = of_gc->xlate(of_gc, np, gpio_spec);
+ if (err < 0)
+ goto err1;
+
+ mm_gc = to_of_mm_gpio_chip(&of_gc->gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err1:
+ of_node_put(gc);
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
static int __init qe_add_gpiochips(void)
{
struct device_node *np;
With this API we're able to set a QE pin to the GPIO mode or a dedicated peripheral function. The API relies on the fact that QE gpio controllers are registered. If they aren't, the API won't work (gracefully though). There is one caveat though: if anybody occupied the node->data before us, or overwrote it, then bad things will happen. Luckily this is all in the platform code that we fully control, so this should never happen. I could implement more checks (for example we could create a list of successfully registered QE controllers, and compare the node->data in the qe_pin_request()), but this is unneeded if nobody is going to do silly things behind our back. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> --- arch/powerpc/include/asm/qe.h | 9 ++ arch/powerpc/sysdev/qe_lib/gpio.c | 195 +++++++++++++++++++++++++++++++++++++ 2 files changed, 204 insertions(+), 0 deletions(-)