diff mbox

[v5,02/22] add CONFIG_VLAN_TAGGED configuration option

Message ID 20131119194649.14082.31613.stgit@ray-controller
State Changes Requested
Headers show

Commit Message

michael-dev Nov. 19, 2013, 7:46 p.m. UTC 
Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
---
 hostapd/Makefile     |    3 +++
 hostapd/defconfig    |    3 +++
 hostapd/hostapd.conf |   14 ++++++++++----
 3 files changed, 16 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/hostapd/Makefile b/hostapd/Makefile
index 87ff9b4..5ceaf4e 100644
--- a/hostapd/Makefile
+++ b/hostapd/Makefile
@@ -130,6 +130,9 @@  OBJS += ../src/ap/vlan_util.o
 endif
 CFLAGS += -DCONFIG_VLAN_NETLINK
 endif
+ifdef CONFIG_VLAN_TAGGED
+CFLAGS += -DCONFIG_VLAN_TAGGED
+endif
 endif
 
 ifdef CONFIG_NO_CTRL_IFACE
diff --git a/hostapd/defconfig b/hostapd/defconfig
index 3f2924b..951f0dc 100644
--- a/hostapd/defconfig
+++ b/hostapd/defconfig
@@ -180,6 +180,9 @@  CONFIG_IPV6=y
 # Note: This requires libnl 3.1 or newer.
 #CONFIG_VLAN_NETLINK=y
 
+# Enable support for tagged VLANs.
+#CONFIG_VLAN_TAGGED=y
+
 # Remove support for dumping state into a file on SIGUSR1 signal
 # This can be used to reduce binary size at the cost of disabling a debugging
 # option.
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 9b70d0f..1c4c1c7 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -873,10 +873,14 @@  own_ip_addr=127.0.0.1
 
 # Dynamic VLAN mode; allow RADIUS authentication server to decide which VLAN
 # is used for the stations. This information is parsed from following RADIUS
-# attributes based on RFC 3580 and RFC 2868: Tunnel-Type (value 13 = VLAN),
-# Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
-# VLANID as a string). Optionally, the local MAC ACL list (accept_mac_file) can
-# be used to set static client MAC address to VLAN ID mapping.
+# attributes based on RFC 3580, RFC 2868 and RFC 4675:
+#  a) Tunnel-Type (value 13 = VLAN), Tunnel-Medium-Type (value 6 = IEEE 802),
+#     Tunnel-Private-Group-ID (value VLANID as a string)
+#  b) Egress-VLAN-ID (see RFC 4675).
+# Optionally, the local MAC ACL list (accept_mac_file) can be used to set
+# static client MAC address to VLAN ID mapping. If tagged vlans are used,
+# append "t" and the tagged vlan id to the untagged vlan id (multiple times
+# if needed).
 # 0 = disabled (default)
 # 1 = option; use default interface if RADIUS server does not include VLAN ID
 # 2 = required; reject authentication if RADIUS server does not include VLAN ID
@@ -888,6 +892,8 @@  own_ip_addr=127.0.0.1
 # multiple BSSIDs or SSIDs. Each line in this text file is defining a new
 # interface and the line must include VLAN ID and interface name separated by
 # white space (space or tab).
+# If tagged vlans are used, append "t" and the tagged vlan id to the untagged
+# vlan id (multiple times if needed).
 # If no entries are provided by this file, the station is statically mapped
 # to <bss-iface>.<vlan-id> interfaces.
 #vlan_file=/etc/hostapd.vlan