Patchwork [4/5] ARM: dts: Add basic support for omap3 LDP zoom1 labrador

login
register
mail settings
Submitter Tony Lindgren
Date Nov. 16, 2013, 12:36 a.m.
Message ID <1384562167-14725-5-git-send-email-tony@atomide.com>
Download mbox | patch
Permalink /patch/291729/
State New
Headers show

Comments

Tony Lindgren - Nov. 16, 2013, 12:36 a.m.
Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
and GPIO keys work.

For twl4030-keypad we're still missing the binding, but
support for that should be trivial to add once the driver
has been updated.

MUSB I'm pretty sure I got got to enumerate once, but I
suspect the battery charging somehow disrupts it and it's
not enumerating in general for some reason.

Patches are welcome to improve things if people are
still using this board.

For reference, here's some more info on this old board:
http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo

Cc: devicetree@vger.kernel.org
Cc: "BenoƮt Cousson" <bcousson@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/Makefile      |   1 +
 arch/arm/boot/dts/omap3-ldp.dts | 231 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 232 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-ldp.dts
Sebastian Reichel - Nov. 16, 2013, 8:04 a.m.
On Fri, Nov 15, 2013 at 04:36:06PM -0800, Tony Lindgren wrote:
> Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
> and GPIO keys work.
> 
> For twl4030-keypad we're still missing the binding, but
> support for that should be trivial to add once the driver
> has been updated.

DT bindings for twl4030-keypad are being worked on:

https://lkml.org/lkml/2013/11/8/463

> MUSB I'm pretty sure I got got to enumerate once, but I
> suspect the battery charging somehow disrupts it and it's
> not enumerating in general for some reason.

Try to add this:

&usb_otg_hs {
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
};

Those were introduced by the new generic PHY framework, see
for example: https://lkml.org/lkml/2013/9/27/37

> [...]

-- Sebastian
Tony Lindgren - Nov. 16, 2013, 2:40 p.m.
* Sebastian Reichel <sre@ring0.de> [131116 00:05]:
> On Fri, Nov 15, 2013 at 04:36:06PM -0800, Tony Lindgren wrote:
> > Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
> > and GPIO keys work.
> > 
> > For twl4030-keypad we're still missing the binding, but
> > support for that should be trivial to add once the driver
> > has been updated.
> 
> DT bindings for twl4030-keypad are being worked on:
> 
> https://lkml.org/lkml/2013/11/8/463
> 
> > MUSB I'm pretty sure I got got to enumerate once, but I
> > suspect the battery charging somehow disrupts it and it's
> > not enumerating in general for some reason.
> 
> Try to add this:
> 
> &usb_otg_hs {
> 	phys = <&usb2_phy>;
> 	phy-names = "usb2-phy";
> };
> 
> Those were introduced by the new generic PHY framework, see
> for example: https://lkml.org/lkml/2013/9/27/37

Thanks yeah those should be added. No luck with those either
though, I do have MUSB working fine on the 37xx-evm with the
same image.

I seem to get twl4030_usb interrupts on cable insert and remove,
then enabling debugging I see the following:

connect
HW_CONDITIONS 0xe0/224; link 3

disconnect
HW_CONDITIONS 0x60/96; link 4

Regards,

Tony

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index de37094..fc37bca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,6 +183,7 @@  dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
+	omap3-ldp.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
new file mode 100644
index 0000000..ddce0d8
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -0,0 +1,231 @@ 
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+	compatible = "ti,omap3-ldp", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		key_enter {
+			label = "enter";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+			linux,code = <0x0107001c>; /* KEY_ENTER */
+			gpio-key,wakeup;
+		};
+
+		key_f1 {
+			label = "f1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+			linux,code = <0x0303003b>; /* KEY_F1 */
+			gpio-key,wakeup;
+		};
+
+		key_f2 {
+			label = "f2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+			linux,code = <0x0403003c>; /* KEY_F2 */
+			gpio-key,wakeup;
+		};
+
+		key_f3 {
+			label = "f3";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+			linux,code = <0x0503003d>; /* KEY_F3 */
+			gpio-key,wakeup;
+		};
+
+		key_f4 {
+			label = "f4";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+			linux,code = <0x0704003e>; /* KEY_F4 */
+			gpio-key,wakeup;
+		};
+
+		key_left {
+			label = "left";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+			linux,code = <0x04070069>; /* KEY_LEFT */
+			gpio-key,wakeup;
+		};
+
+		key_right {
+			label = "right";
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+			linux,code = <0x0507006a>; /* KEY_RIGHT */
+			gpio-key,wakeup;
+		};
+
+		key_up {
+			label = "up";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+			linux,code = <0x06070067>; /* KEY_UP */
+			gpio-key,wakeup;
+		};
+
+		key_down {
+			label = "down";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+			linux,code = <0x0707006c>; /* KEY_DOWN */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x01000000>,
+		 <1 0 0x08000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,nand";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x1c0000 0x40000>;
+		};
+		partition@200000 {
+			label = "Kernel";
+			reg = <0x200000 0x1e00000>;
+		};
+		partition@2000000 {
+			label = "Filesystem";
+			reg = <0x2000000 0xe000000>;
+		};
+	};
+
+	ethernet@gpmc {
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		reg = <1 0 0xff>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+		>;
+	};
+
+	musb_pins: pinmux_musb_pins {
+		pinctrl-single,pins = <
+			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+		>;
+	};
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux1 {
+	/* Needed for ads7846 */
+        regulator-name = "vcc";
+};
+
+&vpll2 {
+       /* Needed for DSS */
+       regulator-name = "vdds_dsi";
+};