diff mbox

[U-Boot,3/3] cm_t335: add support for pca9555 i2c gpio extender

Message ID 1383803855-12256-4-git-send-email-ilya@compulab.co.il
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Ilya Ledvich Nov. 7, 2013, 5:57 a.m. UTC 
Add support for the 16 bits pca9555 i2c to gpio extender featured
by the SB-T335 baseboard.

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
 include/configs/cm_t335.h |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Tom Rini Dec. 4, 2013, 10:03 p.m. UTC | #1 
On Thu, Nov 07, 2013 at 07:57:35AM +0200, Ilya Ledvich wrote:

> Add support for the 16 bits pca9555 i2c to gpio extender featured
> by the SB-T335 baseboard.
> 
> Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>

Applied to u-boot-ti/master, thanks!
diff mbox

Patch

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index fbdead2..56e9a8e 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -166,5 +166,17 @@ 
 #define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_BOOT			0
 
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Enable PCA9555 at I2C0-0x26.
+ * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
+ */
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_SYS_I2C_PCA953X_ADDR	0x26
+#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x26, 16} }
+#endif /* CONFIG_SPL_BUILD */
+
 #endif	/* __CONFIG_CM_T335_H */