-ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+ide-gd driver 1.18
[...]
 PCI: Enabling device: (0000:01:01.1), cmd 2
-sunhme.c:v3.00 June 23, 2006 David S. Miller (davem@davemloft.net)
+sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@davemloft.net)
 eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9c:14:f5
-CMD646: IDE controller (0x1095:0x0646 rev 0x03) at  PCI slot 0000:01:03.0
-CMD646: MultiWord DMA force limited
-CMD646: 100% native mode on irq 14
+cmd64x 0000:01:03.0: IDE controller (0x1095:0x0646 rev 0x03)
+cmd64x 0000:01:03.0: 100% native mode on irq 14
     ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027
     ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f
 Probing IDE interface ide0...
 hda: ST34342A, ATA DISK drive
 hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
 hda: MWDMA2 mode selected
 Probing IDE interface ide1...
 hdc: Maxtor 6E040L0, ATA DISK drive
 hdd: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
 hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
 hdc: MWDMA2 mode selected
 hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
-hdd: MWDMA2 mode selected
-ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 14
-ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 14 (shared with ide0)
-SCSI subsystem initialized
-libata version 3.00 loaded.
+hdd: bad DMA info in identify block
+hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
+ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 14 (serialized)
+irq 14: nobody cared (try booting with the "irqpoll" option)
+Call Trace:
+ [0000000000490464] note_interrupt+0x160/0x1e8
+ [0000000000490b94] handle_fasteoi_irq+0x9c/0xc8
+ [0000000000429e60] handler_irq+0xb0/0xe8
+ [00000000004208b4] tl0_irq5+0x14/0x20
+ [000000000045ad50] __do_softirq+0x58/0x17c
+ [0000000000429d84] do_softirq+0x50/0x7c
+ [000000000045aa80] irq_exit+0x38/0x88
+ [000000000042e710] timer_interrupt+0x70/0x88
+ [00000000004209d4] tl0_irq14+0x14/0x20
+ [000000000057d0f4] __bzero+0xa8/0xc0
+ [000000000048fce8] request_threaded_irq+0x78/0x12c
+ [000000000060801c] ide_host_register+0x4e4/0x6a8
+ [000000000060d114] ide_pci_init_one+0xc8/0xf8
+ [000000001001271c] cmd64x_init_one+0x88/0x9c [cmd64x]
+ [000000000058eaec] local_pci_probe+0x10/0x24
+ [000000000058ec70] pci_device_probe+0x4c/0x84
+handlers:
+[<0000000000604384>] (ide_intr+0x8/0x234)
+Disabling IRQ #14
+irq 14: nobody cared (try booting with the "irqpoll" option)
+Call Trace:
+ [0000000000490464] note_interrupt+0x160/0x1e8
+ [0000000000490b94] handle_fasteoi_irq+0x9c/0xc8
+ [0000000000429e60] handler_irq+0xb0/0xe8
+ [00000000004208b4] tl0_irq5+0x14/0x20
+ [000000000045ad50] __do_softirq+0x58/0x17c
+ [0000000000429d84] do_softirq+0x50/0x7c
+ [000000000045aa80] irq_exit+0x38/0x88
+ [000000000042e710] timer_interrupt+0x70/0x88
+ [00000000004209d4] tl0_irq14+0x14/0x20
+ [000000000048fbcc] __setup_irq+0x228/0x2cc
+ [000000000048fd68] request_threaded_irq+0xf8/0x12c
+ [000000000060801c] ide_host_register+0x4e4/0x6a8
+ [000000000060d114] ide_pci_init_one+0xc8/0xf8
+ [000000001001271c] cmd64x_init_one+0x88/0x9c [cmd64x]
+ [000000000058eaec] local_pci_probe+0x10/0x24
+ [000000000058ec70] pci_device_probe+0x4c/0x84
+handlers:
+[<0000000000604384>] (ide_intr+0x8/0x234)
+[<0000000000604384>] (ide_intr+0x8/0x234)
+Disabling IRQ #14
+ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 14 (serialized)
 hda: max request size: 128KiB
 hda: 8404830 sectors (4303 MB), CHS=8894/15/63
 hda: cache flushes not supported
  hda: hda1 hda2 hda3 hda4
 hdc: max request size: 128KiB
 hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63
 hdc: cache flushes supported
  hdc: hdc1 hdc2 hdc3 hdc4 hdc5
-hdd: ATAPI 52X CD-ROM drive, 192kB Cache
+SCSI subsystem initialized
+libata version 3.00 loaded.
+ide-cd driver 5.00
+ide-cd: hdd: ATAPI 52X CD-ROM drive, 192kB Cache
 Uniform CD-ROM driver Revision: 3.20
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs: mounted filesystem with ordered data mode.