Patchwork [GIT] : Networking

login
register
mail settings
Submitter David Miller
Date June 16, 2009, 9:56 a.m.
Message ID <20090616.025659.224075454.davem@davemloft.net>
Download mbox | patch
Permalink /patch/28728/
State RFC
Delegated to: David Miller
Headers show

Comments

David Miller - June 16, 2009, 9:56 a.m.
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 16 Jun 2009 11:48:13 +0200

> I think David's larger point was that what looked to me like more 
> widespread breakage was in fact limited to [a]x25, a comparatively 
> rarely used (and rarely tested) corner of the kernel.
> 
> I turned them off and that solved the problems here. (and i suspect 
> the real fix wont be far away either) Thanks everyone.

This code path has been broken, basically, forever.  It does a
lock_sock() from a timer, which has that might_sleep() check, and
essentially always has.

It would have warned this way years ago if someone had triggered it.

The code has been this way forever, so something else changed to start
triggering this on you.

I still am curious what in the world opens those sockets for you,
nothing normal should be doing so.

Can you satisfy my curiosity by turning X25 back on and booting
with this patch?  Thanks.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ingo Molnar - June 16, 2009, 10:11 a.m.
* David Miller <davem@davemloft.net> wrote:

> From: Ingo Molnar <mingo@elte.hu>
> Date: Tue, 16 Jun 2009 11:48:13 +0200
> 
> > I think David's larger point was that what looked to me like more 
> > widespread breakage was in fact limited to [a]x25, a comparatively 
> > rarely used (and rarely tested) corner of the kernel.
> > 
> > I turned them off and that solved the problems here. (and i suspect 
> > the real fix wont be far away either) Thanks everyone.
> 
> This code path has been broken, basically, forever.  It does a
> lock_sock() from a timer, which has that might_sleep() check, and
> essentially always has.
> 
> It would have warned this way years ago if someone had triggered it.
> 
> The code has been this way forever, so something else changed to start
> triggering this on you.
> 
> I still am curious what in the world opens those sockets for you,
> nothing normal should be doing so.
> 
> Can you satisfy my curiosity by turning X25 back on and booting 
> with this patch?  Thanks.

sure, here you go (i also added a stack dump, just in case it's some 
kernel-internal socket open):

 [ifconfig:3516]: Creates X25 socket.

so plain ifconfig. Part of the ~1.5 years old net-tools-1.60-84.fc8.

there's nothing intentionally x25 related in the network config:

  mercury:/etc/sysconfig> grep -rli x25 .
  mercury:/etc/sysconfig> 

odd. I sure would have noticed such a warning+crash - it started 
triggering today. Maybe something confuses ifconfig into creating 
some? (the box did come up fine)

Full bootlog below.

	Ingo

Linux version 2.6.30-tip (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #54077 SMP Tue Jun 16 12:03:21 CEST 2009
Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
KERNEL supported cpus:
  Intel GenuineIntel
  Centaur CentaurHauls
CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
CPU: Your system may be unstable.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
debug: ignoring loglevel setting.
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009f800 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000f0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000003fff0000 (usable)
 modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 modified: 000000003fff3000 - 0000000040000000 (ACPI data)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000003fff0000
 0000000000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 100000-302000
(6 early reservations) ==> bootmem [0000000000 - 003fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0003241d98]    TEXT DATA BSS ==> [0001000000 - 0003241d98]
  #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #4 [0003242000 - 0003242149]              BRK ==> [0003242000 - 0003242149]
  #5 [0000100000 - 0000300000]          PGTABLE ==> [0000100000 - 0000300000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000f5680] f5680
  mpc: f1400-f152c
 [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880003800000-ffff8800051fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
  DMA zone: 104 pages used for memmap
  DMA zone: 611 pages reserved
  DMA zone: 3268 pages, LIFO batch:0
  DMA32 zone: 6552 pages used for memmap
  DMA32 zone: 251480 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
  mpc: f1400-f152c
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
Bus #0 is PCI   
Bus #1 is PCI   
Bus #2 is PCI   
Bus #3 is PCI   
Bus #4 is PCI   
Bus #5 is PCI   
Bus #6 is ISA   
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffffffff5fc000 (fee00000)
mapped IOAPIC to ffffffffff5fb000 (fec00000)
nr_irqs_gsi: 24
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 477 pages at ffff880005200000, static data 1932960 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254748
Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
debug: sysrq always enabled.
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing CPU#0
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 977592k/1048512k available (13593k kernel code, 452k absent, 69816k reserved, 7155k data, 2444k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
NR_IRQS:33024 nr_irqs:424
Fast TSC calibration using PIT
Detected 2010.653 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console handover: boot [earlyser0] -> real [ttyS0]
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 6207 kB
 per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:failed|failed|  ok  |failed|failed|failed|
                 A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
             A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
             A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |failed|
           recursive read-lock #2:             |  ok  |             |failed|
            mixed read-write-lock:             |failed|             |failed|
            mixed write-read-lock:             |failed|             |failed|
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
         hard-safe-A + irqs-on/12:failed|failed|  ok  |
         soft-safe-A + irqs-on/12:failed|failed|  ok  |
         hard-safe-A + irqs-on/21:failed|failed|  ok  |
         soft-safe-A + irqs-on/21:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
      hard-irq lock-inversion/123:failed|failed|  ok  |
      soft-irq lock-inversion/123:failed|failed|  ok  |
      hard-irq lock-inversion/132:failed|failed|  ok  |
      soft-irq lock-inversion/132:failed|failed|  ok  |
      hard-irq lock-inversion/213:failed|failed|  ok  |
      soft-irq lock-inversion/213:failed|failed|  ok  |
      hard-irq lock-inversion/231:failed|failed|  ok  |
      soft-irq lock-inversion/231:failed|failed|  ok  |
      hard-irq lock-inversion/312:failed|failed|  ok  |
      soft-irq lock-inversion/312:failed|failed|  ok  |
      hard-irq lock-inversion/321:failed|failed|  ok  |
      soft-irq lock-inversion/321:failed|failed|  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
--------------------------------------------------------
133 out of 218 testcases failed, as expected. |
----------------------------------------------------
allocated 10485760 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
ODEBUG: 9 of 9 active objects replaced
Calibrating delay loop (skipped), value calculated using timer frequency.. 4022.86 BogoMIPS (lpj=6702176)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Performance Counters: <6>Setting APIC routing to flat
enabled ExtINT on CPU#0
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 2-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1256355
..... delta 1256355
..... mult: 53963554
..... calibration result: 670056
..... CPU clock speed is 2010.1227 MHz.
..... host bus clock speed is 201.0123 MHz.
... verify APIC timer
... jiffies delta = 30
... jiffies result ok
calling  migration_init+0x0/0x5c @ 1
initcall migration_init+0x0/0x5c returned 1 after 3255 usecs
initcall migration_init+0x0/0x5c returned with error code 1 
calling  spawn_ksoftirqd+0x0/0x5c @ 1
initcall spawn_ksoftirqd+0x0/0x5c returned 0 after 0 usecs
calling  init_call_single_data+0x0/0xeb @ 1
initcall init_call_single_data+0x0/0xeb returned 0 after 0 usecs
calling  relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling  tracer_alloc_buffers+0x0/0x32d @ 1
initcall tracer_alloc_buffers+0x0/0x32d returned 0 after 0 usecs
calling  init_trace_printk+0x0/0x8 @ 1
initcall init_trace_printk+0x0/0x8 returned 0 after 0 usecs
calling  trace_workqueue_early_init+0x0/0x17a @ 1
initcall trace_workqueue_early_init+0x0/0x17a returned 0 after 0 usecs
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4021.85 BogoMIPS (lpj=6700573)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8044.71 BogoMIPS).
calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling  net_ns_init+0x0/0x162 @ 1
initcall net_ns_init+0x0/0x162 returned 0 after 0 usecs
calling  cpufreq_tsc+0x0/0x28 @ 1
initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
calling  print_banner+0x0/0xe @ 1
Booting paravirtualized kernel on bare hardware
initcall print_banner+0x0/0xe returned 0 after 3255 usecs
calling  init_smp_flush+0x0/0x4f @ 1
initcall init_smp_flush+0x0/0x4f returned 0 after 0 usecs
calling  sysctl_init+0x0/0x32 @ 1
initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs
calling  ksysfs_init+0x0/0xbb @ 1
initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
calling  async_init+0x0/0x47 @ 1
initcall async_init+0x0/0x47 returned 0 after 0 usecs
calling  init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling  init_hw_breakpoint+0x0/0x12 @ 1
initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs
calling  filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling  init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling  init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling  init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling  debugfs_init+0x0/0x66 @ 1
initcall debugfs_init+0x0/0x66 returned 0 after 0 usecs
calling  securityfs_init+0x0/0x54 @ 1
initcall securityfs_init+0x0/0x54 returned 0 after 0 usecs
calling  random32_init+0x0/0x129 @ 1
initcall random32_init+0x0/0x129 returned 0 after 0 usecs
calling  regulator_init+0x0/0x2e @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2e returned 0 after 3255 usecs
calling  cpufreq_core_init+0x0/0xb8 @ 1
initcall cpufreq_core_init+0x0/0xb8 returned 0 after 0 usecs
calling  cpuidle_init+0x0/0x43 @ 1
initcall cpuidle_init+0x0/0x43 returned 0 after 0 usecs
calling  virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
calling  sock_init+0x0/0x60 @ 1
initcall sock_init+0x0/0x60 returned 0 after 0 usecs
calling  netpoll_init+0x0/0x41 @ 1
initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs
calling  netlink_proto_init+0x0/0x1c3 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x1c3 returned 0 after 3255 usecs
calling  bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling  kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling  pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling  pci_driver_init+0x0/0x18 @ 1
initcall pci_driver_init+0x0/0x18 returned 0 after 0 usecs
calling  lcd_class_init+0x0/0x4d @ 1
initcall lcd_class_init+0x0/0x4d returned 0 after 3255 usecs
calling  backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling  video_output_class_init+0x0/0x21 @ 1
initcall video_output_class_init+0x0/0x21 returned 0 after 0 usecs
calling  tty_class_init+0x0/0x31 @ 1
initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs
calling  vtconsole_class_init+0x0/0xcc @ 1
initcall vtconsole_class_init+0x0/0xcc returned 0 after 0 usecs
calling  i2c_init+0x0/0x6b @ 1
initcall i2c_init+0x0/0x6b returned 0 after 3255 usecs
calling  amd_postcore_init+0x0/0xbf @ 1
initcall amd_postcore_init+0x0/0xbf returned 0 after 0 usecs
calling  arch_kdebugfs_init+0x0/0x270 @ 1
initcall arch_kdebugfs_init+0x0/0x270 returned 0 after 0 usecs
calling  mtrr_if_init+0x0/0x6d @ 1
initcall mtrr_if_init+0x0/0x6d returned 0 after 0 usecs
calling  dmi_id_init+0x0/0x36c @ 1
initcall dmi_id_init+0x0/0x36c returned 0 after 0 usecs
calling  pci_arch_init+0x0/0x50 @ 1
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x50 returned 0 after 3255 usecs
calling  topology_init+0x0/0x77 @ 1
initcall topology_init+0x0/0x77 returned 0 after 0 usecs
calling  mtrr_init_finialize+0x0/0x3e @ 1
initcall mtrr_init_finialize+0x0/0x3e returned 0 after 0 usecs
calling  param_sysfs_init+0x0/0x395 @ 1
initcall param_sysfs_init+0x0/0x395 returned 0 after 78125 usecs
calling  init_slow_work+0x0/0x38 @ 1
initcall init_slow_work+0x0/0x38 returned 0 after 0 usecs
calling  default_bdi_init+0x0/0x3b @ 1
initcall default_bdi_init+0x0/0x3b returned 0 after 0 usecs
calling  init_bio+0x0/0x143 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0x143 returned 0 after 3255 usecs
calling  cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling  blk_settings_init+0x0/0x2c @ 1
initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs
calling  blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling  blk_softirq_init+0x0/0xb3 @ 1
initcall blk_softirq_init+0x0/0xb3 returned 0 after 0 usecs
calling  genhd_device_init+0x0/0x69 @ 1
initcall genhd_device_init+0x0/0x69 returned 0 after 0 usecs
calling  pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling  fbmem_init+0x0/0x95 @ 1
initcall fbmem_init+0x0/0x95 returned 0 after 0 usecs
calling  max1586_pmic_init+0x0/0x14 @ 1
initcall max1586_pmic_init+0x0/0x14 returned 0 after 0 usecs
calling  twl4030reg_init+0x0/0x17 @ 1
initcall twl4030reg_init+0x0/0x17 returned 0 after 0 usecs
calling  misc_init+0x0/0xa4 @ 1
initcall misc_init+0x0/0xa4 returned 0 after 0 usecs
calling  cn_init+0x0/0xfb @ 1
initcall cn_init+0x0/0xfb returned 0 after 0 usecs
calling  tifm_init+0x0/0x8a @ 1
initcall tifm_init+0x0/0x8a returned 0 after 0 usecs
calling  twl4030_init+0x0/0x1f @ 1
initcall twl4030_init+0x0/0x1f returned 0 after 0 usecs
calling  init_scsi+0x0/0xa1 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0xa1 returned 0 after 3255 usecs
calling  ata_init+0x0/0x405 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x405 returned 0 after 3255 usecs
calling  phy_init+0x0/0x3a @ 1
initcall phy_init+0x0/0x3a returned 0 after 0 usecs
calling  init_pcmcia_cs+0x0/0x2f @ 1
initcall init_pcmcia_cs+0x0/0x2f returned 0 after 0 usecs
calling  twl4030_usb_init+0x0/0x12 @ 1
initcall twl4030_usb_init+0x0/0x12 returned 0 after 0 usecs
calling  nop_usb_xceiv_init+0x0/0x15 @ 1
initcall nop_usb_xceiv_init+0x0/0x15 returned 0 after 0 usecs
calling  usb_init+0x0/0x11f @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x11f returned 0 after 13020 usecs
calling  serio_init+0x0/0x92 @ 1
initcall serio_init+0x0/0x92 returned 0 after 0 usecs
calling  gameport_init+0x0/0x92 @ 1
initcall gameport_init+0x0/0x92 returned 0 after 0 usecs
calling  input_init+0x0/0x149 @ 1
initcall input_init+0x0/0x149 returned 0 after 0 usecs
calling  rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling  power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling  thermal_init+0x0/0x68 @ 1
initcall thermal_init+0x0/0x68 returned 0 after 3255 usecs
calling  mmc_init+0x0/0x7b @ 1
initcall mmc_init+0x0/0x7b returned 0 after 0 usecs
calling  pci_subsys_init+0x0/0x150 @ 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Scanning bus 0000:00
pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xd0
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1bd
PCI: Fixups for bus 0000:00
pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0
PCI: Scanning bus 0000:05
pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
PCI: Fixups for bus 0000:05
pci 0000:00:09.0: transparent bridge
pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
PCI: Bus scan for 0000:05 returning with max=05
pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0
PCI: Scanning bus 0000:04
PCI: Fixups for bus 0000:04
PCI: Bus scan for 0000:04 returning with max=04
pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0
PCI: Scanning bus 0000:03
PCI: Fixups for bus 0000:03
PCI: Bus scan for 0000:03 returning with max=03
pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0
PCI: Scanning bus 0000:02
PCI: Fixups for bus 0000:02
PCI: Bus scan for 0000:02 returning with max=02
pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0
PCI: Scanning bus 0000:01
pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x22
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x22
pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1bd
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
PCI: Fixups for bus 0000:01
pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
PCI: Bus scan for 0000:01 returning with max=01
pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1
pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1
pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1
pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1
pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1
PCI: Bus scan for 0000:00 returning with max=05
pci 0000:00:00.0: default IRQ router [10de:005e]
initcall pci_subsys_init+0x0/0x150 returned 0 after 397135 usecs
calling  proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling  net_dev_init+0x0/0x1ec @ 1
initcall net_dev_init+0x0/0x1ec returned 0 after 3255 usecs
calling  neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling  fib_rules_init+0x0/0xa9 @ 1
initcall fib_rules_init+0x0/0xa9 returned 0 after 0 usecs
calling  pktsched_init+0x0/0xc4 @ 1
initcall pktsched_init+0x0/0xc4 returned 0 after 0 usecs
calling  tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
calling  tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
calling  genl_init+0x0/0xe9 @ 1
Clocksource tsc unstable (delta = 206294801 ns)
initcall genl_init+0x0/0xe9 returned 0 after 13020 usecs
calling  wanrouter_init+0x0/0x5a @ 1
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
initcall wanrouter_init+0x0/0x5a returned 0 after 3255 usecs
calling  bt_init+0x0/0x60 @ 1
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x60 returned 0 after 13020 usecs
calling  atm_init+0x0/0xb9 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xb9 returned 0 after 6510 usecs
calling  wireless_nlevent_init+0x0/0x41 @ 1
initcall wireless_nlevent_init+0x0/0x41 returned 0 after 0 usecs
calling  rfkill_init+0x0/0x91 @ 1
initcall rfkill_init+0x0/0x91 returned 0 after 0 usecs
calling  sysctl_init+0x0/0x4c @ 1
initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs
calling  pci_iommu_init+0x0/0x2f @ 1
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
initcall pci_iommu_init+0x0/0x2f returned 0 after 48828 usecs
calling  print_all_ICs+0x0/0x5bd @ 1

printing PIC contents
... PIC  IMR: fffa
... PIC  IRR: 0001
... PIC  ISR: 0001
... PIC ELCR: 0828

printing local APIC contents on CPU#0/0:
... APIC ID:      00000000 (0)
... APIC VERSION: 00040010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fd
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000a396
... APIC TMCCT: 0000276c
... APIC TDCR: 00000003


printing local APIC contents on CPU#1/1:
... APIC ID:      01000000 (1)
... APIC VERSION: 00040010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 02000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fd
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000a396
... APIC TMCCT: 00003190
... APIC TDCR: 00000003

number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 00000000
.......    : physical APIC id: 00
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
 00 003 0    0    0   0   0    1    1    30
 01 003 0    0    0   0   0    1    1    31
 02 000 1    0    0   0   0    0    0    00
 03 003 1    1    0   1   0    1    1    33
 04 003 0    0    0   0   0    1    1    34
 05 003 1    1    0   1   0    1    1    35
 06 003 0    0    0   0   0    1    1    36
 07 003 1    0    0   0   0    1    1    37
 08 003 0    0    0   0   0    1    1    38
 09 003 0    0    0   0   0    1    1    39
 0a 003 0    0    0   0   0    1    1    3A
 0b 003 1    1    0   1   0    1    1    3B
 0c 003 0    0    0   0   0    1    1    3C
 0d 003 0    0    0   0   0    1    1    3D
 0e 003 0    0    0   0   0    1    1    3E
 0f 003 0    0    0   0   0    1    1    3F
 10 000 1    0    0   0   0    0    0    00
 11 000 1    0    0   0   0    0    0    00
 12 000 1    0    0   0   0    0    0    00
 13 000 1    0    0   0   0    0    0    00
 14 000 1    0    0   0   0    0    0    00
 15 000 1    0    0   0   0    0    0    00
 16 000 1    0    0   0   0    0    0    00
 17 000 1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall print_all_ICs+0x0/0x5bd returned 0 after 315755 usecs
calling  hpet_late_init+0x0/0xf0 @ 1
initcall hpet_late_init+0x0/0xf0 returned -19 after 0 usecs
calling  clocksource_done_booting+0x0/0x12 @ 1
initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 usecs
calling  ftrace_init_debugfs+0x0/0x23f @ 1
initcall ftrace_init_debugfs+0x0/0x23f returned 0 after 0 usecs
calling  rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs
calling  tracer_init_debugfs+0x0/0x353 @ 1
initcall tracer_init_debugfs+0x0/0x353 returned 0 after 0 usecs
calling  init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 0 usecs
calling  stat_workqueue_init+0x0/0x2f @ 1
initcall stat_workqueue_init+0x0/0x2f returned 0 after 0 usecs
calling  event_trace_init+0x0/0x557 @ 1
initcall event_trace_init+0x0/0x557 returned 0 after 6510 usecs
calling  init_pipe_fs+0x0/0x51 @ 1
initcall init_pipe_fs+0x0/0x51 returned 0 after 0 usecs
calling  eventpoll_init+0x0/0xfb @ 1
initcall eventpoll_init+0x0/0xfb returned 0 after 0 usecs
calling  anon_inode_init+0x0/0x12e @ 1
initcall anon_inode_init+0x0/0x12e returned 0 after 0 usecs
calling  fscache_init+0x0/0xc0 @ 1
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
initcall fscache_init+0x0/0xc0 returned 0 after 6510 usecs
calling  tomoyo_initerface_init+0x0/0x15f @ 1
initcall tomoyo_initerface_init+0x0/0x15f returned 0 after 0 usecs
calling  chr_dev_init+0x0/0xa3 @ 1
initcall chr_dev_init+0x0/0xa3 returned 0 after 0 usecs
calling  firmware_class_init+0x0/0x7f @ 1
initcall firmware_class_init+0x0/0x7f returned 0 after 0 usecs
calling  cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
calling  cpufreq_gov_dbs_init+0x0/0x6b @ 1
initcall cpufreq_gov_dbs_init+0x0/0x6b returned 0 after 0 usecs
calling  ssb_modinit+0x0/0x7a @ 1
initcall ssb_modinit+0x0/0x7a returned 0 after 0 usecs
calling  pcibios_assign_resources+0x0/0x8a @ 1
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0:   IO window: 0xc000-0xcfff
pci 0000:00:09.0:   MEM window: 0xda000000-0xda0fffff
pci 0000:00:09.0:   PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: disabled
pci 0000:00:0b.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: disabled
pci 0000:00:0c.0:   PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: disabled
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:0e.0:   IO window: 0xb000-0xbfff
pci 0000:00:0e.0:   MEM window: 0xd8000000-0xd9ffffff
pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff]
pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
initcall pcibios_assign_resources+0x0/0x8a returned 0 after 113932 usecs
calling  sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 0 usecs
calling  inet_init+0x0/0x2a6 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 32768 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 32768)
TCP reno registered
initcall inet_init+0x0/0x2a6 returned 0 after 22786 usecs
calling  af_unix_init+0x0/0x58 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x58 returned 0 after 3255 usecs
calling  default_rootfs+0x0/0x6e @ 1
initcall default_rootfs+0x0/0x6e returned 0 after 0 usecs
calling  calgary_fixup_tce_spaces+0x0/0xf8 @ 1
initcall calgary_fixup_tce_spaces+0x0/0xf8 returned -19 after 0 usecs
calling  i8259A_init_sysfs+0x0/0x29 @ 1
initcall i8259A_init_sysfs+0x0/0x29 returned 0 after 0 usecs
calling  vsyscall_init+0x0/0x6c @ 1
initcall vsyscall_init+0x0/0x6c returned 0 after 0 usecs
calling  sbf_init+0x0/0x109 @ 1
initcall sbf_init+0x0/0x109 returned 0 after 0 usecs
calling  i8237A_init_sysfs+0x0/0x29 @ 1
initcall i8237A_init_sysfs+0x0/0x29 returned 0 after 0 usecs
calling  add_rtc_cmos+0x0/0x45 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0x45 returned 0 after 3255 usecs
calling  cache_sysfs_init+0x0/0xa4 @ 1
initcall cache_sysfs_init+0x0/0xa4 returned 0 after 0 usecs
calling  cpu_debug_init+0x0/0x297 @ 1
cpu0(2) debug files 137
cpu1(2) debug files 137
initcall cpu_debug_init+0x0/0x297 returned 0 after 9765 usecs
calling  cpuid_init+0x0/0x1c0 @ 1
initcall cpuid_init+0x0/0x1c0 returned 0 after 3255 usecs
calling  ioapic_init_sysfs+0x0/0xd2 @ 1
initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 0 usecs
calling  add_pcspkr+0x0/0x2a @ 1
initcall add_pcspkr+0x0/0x2a returned 0 after 0 usecs
calling  start_periodic_check_for_corruption+0x0/0x40 @ 1
Scanning for low memory corruption every 60 seconds
initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 3255 usecs
calling  start_pageattr_test+0x0/0x60 @ 1
initcall start_pageattr_test+0x0/0x60 returned 0 after 0 usecs
calling  crypto_fpu_module_init+0x0/0x12 @ 1
initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 0 usecs
calling  aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 0 usecs
calling  init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 0 usecs
calling  aesni_init+0x0/0x14a @ 1
Intel AES-NI instructions are not detected.
initcall aesni_init+0x0/0x14a returned -19 after 3255 usecs
calling  crc32c_intel_mod_init+0x0/0x30 @ 1
initcall crc32c_intel_mod_init+0x0/0x30 returned -19 after 0 usecs
calling  init_vdso_vars+0x0/0x241 @ 1
initcall init_vdso_vars+0x0/0x241 returned 0 after 0 usecs
calling  ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 usecs
calling  sysenter_setup+0x0/0x372 @ 1
initcall sysenter_setup+0x0/0x372 returned 0 after 0 usecs
calling  proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_execdomains_init+0x0/0x27 @ 1
initcall proc_execdomains_init+0x0/0x27 returned 0 after 0 usecs
calling  ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 0 usecs
calling  uid_cache_init+0x0/0x8d @ 1
initcall uid_cache_init+0x0/0x8d returned 0 after 0 usecs
calling  init_posix_timers+0x0/0xe8 @ 1
initcall init_posix_timers+0x0/0xe8 returned 0 after 0 usecs
calling  init_posix_cpu_timers+0x0/0xb3 @ 1
initcall init_posix_cpu_timers+0x0/0xb3 returned 0 after 0 usecs
calling  nsproxy_cache_init+0x0/0x33 @ 1
initcall nsproxy_cache_init+0x0/0x33 returned 0 after 0 usecs
calling  create_proc_profile+0x0/0x310 @ 1
initcall create_proc_profile+0x0/0x310 returned 0 after 0 usecs
calling  timekeeping_init_device+0x0/0x29 @ 1
initcall timekeeping_init_device+0x0/0x29 returned 0 after 0 usecs
calling  init_clocksource_sysfs+0x0/0x52 @ 1
initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 0 usecs
calling  init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
calling  lockdep_proc_init+0x0/0x5f @ 1
initcall lockdep_proc_init+0x0/0x5f returned 0 after 0 usecs
calling  futex_init+0x0/0xd5 @ 1
initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
calling  proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
calling  kallsyms_init+0x0/0x32 @ 1
initcall kallsyms_init+0x0/0x32 returned 0 after 0 usecs
calling  crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 3255 usecs
calling  crash_notes_memory_init+0x0/0x3a @ 1
initcall crash_notes_memory_init+0x0/0x3a returned 0 after 0 usecs
calling  pid_namespaces_init+0x0/0x2d @ 1
initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 usecs
calling  hung_task_init+0x0/0x56 @ 1
initcall hung_task_init+0x0/0x56 returned 0 after 0 usecs
calling  rcu_torture_init+0x0/0x7b8 @ 1
rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
initcall rcu_torture_init+0x0/0x7b8 returned 0 after 3255 usecs
calling  utsname_sysctl_init+0x0/0x14 @ 1
sysctl table check failed: /kernel/ostype .1.1 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff8251630a>] ? utsname_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff8251631a>] utsname_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff8109df76>] ? register_irq_proc+0xc6/0xe0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/osrelease .1.2 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff8251630a>] ? utsname_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff8251631a>] utsname_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff8109df76>] ? register_irq_proc+0xc6/0xe0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/version .1.4 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff8251630a>] ? utsname_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff8251631a>] utsname_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff8109df76>] ? register_irq_proc+0xc6/0xe0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/hostname .1.7 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff8251630a>] ? utsname_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff8251631a>] utsname_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff8109df76>] ? register_irq_proc+0xc6/0xe0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/domainname .1.8 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff8251630a>] ? utsname_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff8251631a>] utsname_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff8109df76>] ? register_irq_proc+0xc6/0xe0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 585937 usecs
calling  ftrace_nodyn_init+0x0/0x12 @ 1
initcall ftrace_nodyn_init+0x0/0x12 returned 0 after 0 usecs
calling  init_events+0x0/0x70 @ 1
initcall init_events+0x0/0x70 returned 0 after 0 usecs
calling  init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 0 usecs
calling  init_function_trace+0x0/0x12 @ 1
initcall init_function_trace+0x0/0x12 returned 0 after 0 usecs
calling  init_irqsoff_tracer+0x0/0x1e @ 1
initcall init_irqsoff_tracer+0x0/0x1e returned 0 after 0 usecs
calling  init_wakeup_tracer+0x0/0x29 @ 1
initcall init_wakeup_tracer+0x0/0x29 returned 0 after 0 usecs
calling  stack_trace_init+0x0/0x6f @ 1
initcall stack_trace_init+0x0/0x6f returned 0 after 0 usecs
calling  init_mmio_trace+0x0/0x12 @ 1
initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs
calling  init_graph_trace+0x0/0x12 @ 1
initcall init_graph_trace+0x0/0x12 returned 0 after 0 usecs
calling  init_blk_tracer+0x0/0x6c @ 1
initcall init_blk_tracer+0x0/0x6c returned 0 after 0 usecs
calling  register_ftrace_syscalls+0x0/0xa4 @ 1
initcall register_ftrace_syscalls+0x0/0xa4 returned 0 after 0 usecs
calling  perf_counter_sysfs_init+0x0/0x19 @ 1
initcall perf_counter_sysfs_init+0x0/0x19 returned 0 after 0 usecs
calling  init_per_zone_pages_min+0x0/0x96 @ 1
initcall init_per_zone_pages_min+0x0/0x96 returned 0 after 0 usecs
calling  pdflush_init+0x0/0x1c @ 1
initcall pdflush_init+0x0/0x1c returned 0 after 0 usecs
calling  kswapd_init+0x0/0x20 @ 1
initcall kswapd_init+0x0/0x20 returned 0 after 0 usecs
calling  init_tmpfs+0x0/0x3d @ 1
initcall init_tmpfs+0x0/0x3d returned 0 after 0 usecs
calling  setup_vmstat+0x0/0x108 @ 1
initcall setup_vmstat+0x0/0x108 returned 0 after 0 usecs
calling  mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
calling  proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs
calling  procswaps_init+0x0/0x25 @ 1
initcall procswaps_init+0x0/0x25 returned 0 after 0 usecs
calling  hugetlb_init+0x0/0x458 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x458 returned 0 after 3255 usecs
calling  slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 0 usecs
calling  slab_sysfs_init+0x0/0x104 @ 1
initcall slab_sysfs_init+0x0/0x104 returned 0 after 22786 usecs
calling  fasync_init+0x0/0x37 @ 1
initcall fasync_init+0x0/0x37 returned 0 after 0 usecs
calling  proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
calling  inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling  proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs
calling  init_sys32_ioctl+0x0/0x88 @ 1
initcall init_sys32_ioctl+0x0/0x88 returned 0 after 0 usecs
calling  init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
calling  dquot_init+0x0/0xe6 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xe6 returned 0 after 6510 usecs
calling  init_v2_quota_format+0x0/0x14 @ 1
initcall init_v2_quota_format+0x0/0x14 returned 0 after 0 usecs
calling  proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling  vmcore_init+0x0/0xa70 @ 1
initcall vmcore_init+0x0/0xa70 returned 0 after 0 usecs
calling  proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling  configfs_init+0x0/0xd6 @ 1
initcall configfs_init+0x0/0xd6 returned 0 after 0 usecs
calling  init_devpts_fs+0x0/0x5d @ 1
initcall init_devpts_fs+0x0/0x5d returned 0 after 0 usecs
calling  init_dlm+0x0/0xb3 @ 1
DLM (built Jun 16 2009 12:02:48) installed
initcall init_dlm+0x0/0xb3 returned 0 after 3255 usecs
calling  init_reiserfs_fs+0x0/0x8b @ 1
initcall init_reiserfs_fs+0x0/0x8b returned 0 after 0 usecs
calling  init_ext3_fs+0x0/0x72 @ 1
initcall init_ext3_fs+0x0/0x72 returned 0 after 0 usecs
calling  init_ext4_fs+0x0/0x10d @ 1
initcall init_ext4_fs+0x0/0x10d returned 0 after 3255 usecs
calling  journal_init+0x0/0xea @ 1
initcall journal_init+0x0/0xea returned 0 after 3255 usecs
calling  journal_init+0x0/0xfb @ 1
initcall journal_init+0x0/0xfb returned 0 after 3255 usecs
calling  init_squashfs_fs+0x0/0x70 @ 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
initcall init_squashfs_fs+0x0/0x70 returned 0 after 3255 usecs
calling  init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_hugetlbfs_fs+0x0/0xad @ 1
initcall init_hugetlbfs_fs+0x0/0xad returned 0 after 0 usecs
calling  init_fat_fs+0x0/0x54 @ 1
initcall init_fat_fs+0x0/0x54 returned 0 after 0 usecs
calling  init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_bfs_fs+0x0/0x62 @ 1
initcall init_bfs_fs+0x0/0x62 returned 0 after 0 usecs
calling  init_iso9660_fs+0x0/0x72 @ 1
initcall init_iso9660_fs+0x0/0x72 returned 0 after 0 usecs
calling  init_hfsplus_fs+0x0/0x60 @ 1
initcall init_hfsplus_fs+0x0/0x60 returned 0 after 0 usecs
calling  init_hfs_fs+0x0/0x60 @ 1
initcall init_hfs_fs+0x0/0x60 returned 0 after 0 usecs
calling  ecryptfs_init+0x0/0x1db @ 1
initcall ecryptfs_init+0x0/0x1db returned 0 after 3255 usecs
calling  vxfs_init+0x0/0x66 @ 1
initcall vxfs_init+0x0/0x66 returned 0 after 0 usecs
calling  init_nfs_fs+0x0/0x158 @ 1
initcall init_nfs_fs+0x0/0x158 returned 0 after 3255 usecs
calling  init_nfsd+0x0/0x10a @ 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
initcall init_nfsd+0x0/0x10a returned 0 after 6510 usecs
calling  init_nlm+0x0/0x22 @ 1
initcall init_nlm+0x0/0x22 returned 0 after 0 usecs
calling  init_nls_cp775+0x0/0x12 @ 1
initcall init_nls_cp775+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp850+0x0/0x12 @ 1
initcall init_nls_cp850+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp852+0x0/0x12 @ 1
initcall init_nls_cp852+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp855+0x0/0x12 @ 1
initcall init_nls_cp855+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp857+0x0/0x12 @ 1
initcall init_nls_cp857+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp860+0x0/0x12 @ 1
initcall init_nls_cp860+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp861+0x0/0x12 @ 1
initcall init_nls_cp861+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp863+0x0/0x12 @ 1
initcall init_nls_cp863+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp864+0x0/0x12 @ 1
initcall init_nls_cp864+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp865+0x0/0x12 @ 1
initcall init_nls_cp865+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp866+0x0/0x12 @ 1
initcall init_nls_cp866+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp869+0x0/0x12 @ 1
initcall init_nls_cp869+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp874+0x0/0x12 @ 1
initcall init_nls_cp874+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp932+0x0/0x12 @ 1
initcall init_nls_cp932+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_euc_jp+0x0/0x48 @ 1
initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 usecs
calling  init_nls_cp950+0x0/0x12 @ 1
initcall init_nls_cp950+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp1251+0x0/0x12 @ 1
initcall init_nls_cp1251+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_iso8859_4+0x0/0x12 @ 1
initcall init_nls_iso8859_4+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_iso8859_14+0x0/0x12 @ 1
initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_iso8859_15+0x0/0x12 @ 1
initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_koi8_u+0x0/0x12 @ 1
initcall init_nls_koi8_u+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_koi8_ru+0x0/0x48 @ 1
initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 0 usecs
calling  init_nls_utf8+0x0/0x26 @ 1
initcall init_nls_utf8+0x0/0x26 returned 0 after 0 usecs
calling  init_sysv_fs+0x0/0x54 @ 1
initcall init_sysv_fs+0x0/0x54 returned 0 after 0 usecs
calling  init_cifs+0x0/0x509 @ 1
initcall init_cifs+0x0/0x509 returned 0 after 0 usecs
calling  init_ncp_fs+0x0/0x62 @ 1
initcall init_ncp_fs+0x0/0x62 returned 0 after 0 usecs
calling  init_hpfs_fs+0x0/0x62 @ 1
initcall init_hpfs_fs+0x0/0x62 returned 0 after 0 usecs
calling  init_ntfs_fs+0x0/0x247 @ 1
NTFS driver 2.1.29 [Flags: R/W DEBUG].
initcall init_ntfs_fs+0x0/0x247 returned 0 after 3255 usecs
calling  init_efs_fs+0x0/0x70 @ 1
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
initcall init_efs_fs+0x0/0x70 returned 0 after 3255 usecs
calling  init_affs_fs+0x0/0x62 @ 1
initcall init_affs_fs+0x0/0x62 returned 0 after 0 usecs
calling  init_romfs_fs+0x0/0x8c @ 1
ROMFS MTD (C) 2007 Red Hat, Inc.
initcall init_romfs_fs+0x0/0x8c returned 0 after 3255 usecs
calling  init_qnx4_fs+0x0/0x70 @ 1
QNX4 filesystem 0.2.3 registered.
initcall init_qnx4_fs+0x0/0x70 returned 0 after 3255 usecs
calling  init_autofs_fs+0x0/0x12 @ 1
initcall init_autofs_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_autofs4_fs+0x0/0x29 @ 1
initcall init_autofs4_fs+0x0/0x29 returned -16 after 0 usecs
initcall init_autofs4_fs+0x0/0x29 returned with error code -16 
calling  init_adfs_fs+0x0/0x6e @ 1
initcall init_adfs_fs+0x0/0x6e returned 0 after 0 usecs
calling  fuse_init+0x0/0x152 @ 1
fuse init (API version 7.11)
initcall fuse_init+0x0/0x152 returned 0 after 3255 usecs
calling  init_udf_fs+0x0/0x6c @ 1
initcall init_udf_fs+0x0/0x6c returned 0 after 0 usecs
calling  init_jfs_fs+0x0/0x29d @ 1
JFS: nTxBlock = 7642, nTxLock = 61140
initcall init_jfs_fs+0x0/0x29d returned 0 after 9765 usecs
calling  init_nilfs_fs+0x0/0x9a @ 1
initcall init_nilfs_fs+0x0/0x9a returned 0 after 3255 usecs
calling  init_befs_fs+0x0/0x8a @ 1
BeFS version: 0.9.3
initcall init_befs_fs+0x0/0x8a returned 0 after 3255 usecs
calling  ocfs2_init+0x0/0x2a6 @ 1
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x2a6 returned 0 after 3255 usecs
calling  ocfs2_stack_glue_init+0x0/0x9a @ 1
initcall ocfs2_stack_glue_init+0x0/0x9a returned 0 after 0 usecs
calling  o2cb_stack_init+0x0/0x16 @ 1
ocfs2: Registered cluster interface o2cb
initcall o2cb_stack_init+0x0/0x16 returned 0 after 3255 usecs
calling  init_o2nm+0x0/0xc0 @ 1
OCFS2 Node Manager 1.5.0
initcall init_o2nm+0x0/0xc0 returned 0 after 3255 usecs
calling  dlm_init+0x0/0x29d @ 1
OCFS2 DLM 1.5.0
initcall dlm_init+0x0/0x29d returned 0 after 3255 usecs
calling  init_dlmfs_fs+0x0/0xf3 @ 1
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
initcall init_dlmfs_fs+0x0/0xf3 returned 0 after 6510 usecs
calling  init_btrfs_fs+0x0/0xbc @ 1
Btrfs loaded
initcall init_btrfs_fs+0x0/0xbc returned 0 after 3255 usecs
calling  init_gfs2_fs+0x0/0x1fe @ 1
GFS2 (built Jun 16 2009 12:02:59) installed
initcall init_gfs2_fs+0x0/0x1fe returned 0 after 6510 usecs
calling  ipc_init+0x0/0x2f @ 1
msgmni has been set to 1910
initcall ipc_init+0x0/0x2f returned 0 after 0 usecs
calling  ipc_sysctl_init+0x0/0x14 @ 1
sysctl table check failed: /kernel/shmmax .1.34 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/shmall .1.41 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/shmmni .1.45 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/msgmax .1.35 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/msgmni .1.42 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/msgmnb .1.36 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/sem .1.43 No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
sysctl table check failed: /kernel/auto_msgmni  No proc_handler
Pid: 1, comm: swapper Not tainted 2.6.30-tip #54077
Call Trace:
 [<ffffffff810782f5>] set_fail+0x65/0x70
 [<ffffffff8107868c>] sysctl_check_table+0x38c/0x710
 [<ffffffff810786a5>] sysctl_check_table+0x3a5/0x710
 [<ffffffff8105d08c>] ? sysctl_set_parent+0xc/0x50
 [<ffffffff8105dc2c>] __register_sysctl_paths+0x10c/0x350
 [<ffffffff8115a2f7>] ? proc_create_data+0x77/0xd0
 [<ffffffff8107b019>] ? jiffies_read+0x9/0x20
 [<ffffffff82521111>] ? ipc_sysctl_init+0x0/0x14
 [<ffffffff8105de9e>] register_sysctl_paths+0x2e/0x30
 [<ffffffff8105deb8>] register_sysctl_table+0x18/0x20
 [<ffffffff82521121>] ipc_sysctl_init+0x10/0x14
 [<ffffffff8100904f>] do_one_initcall+0x3f/0x1d0
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff810f8e95>] ? check_object+0x265/0x270
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff8151a441>] ? ida_get_new_above+0x151/0x220
 [<ffffffff81014b10>] ? native_sched_clock+0x20/0x80
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81080015>] ? lock_release_holdtime+0x35/0x210
 [<ffffffff81533eb5>] ? _raw_spin_unlock+0xa5/0xc0
 [<ffffffff81d4266b>] ? _spin_unlock+0x2b/0x40
 [<ffffffff8115a194>] ? proc_register+0x124/0x210
 [<ffffffff8115a3ae>] ? create_proc_entry+0x5e/0xb0
 [<ffffffff81150000>] ? dqget+0xa0/0x390
 [<ffffffff8109a939>] ? irq_to_desc+0x9/0x30
 [<ffffffff8250074b>] kernel_init+0x1a8/0x22c
 [<ffffffff8100d50a>] child_rip+0xa/0x20
 [<ffffffff8100ce90>] ? restore_args+0x0/0x30
 [<ffffffff825005a3>] ? kernel_init+0x0/0x22c
 [<ffffffff8100d500>] ? child_rip+0x0/0x20
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 930989 usecs
calling  key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 0 usecs
calling  crypto_wq_init+0x0/0x32 @ 1
initcall crypto_wq_init+0x0/0x32 returned 0 after 0 usecs
calling  crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
calling  chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling  md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  rmd128_mod_init+0x0/0x12 @ 1
initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  rmd160_mod_init+0x0/0x12 @ 1
initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  rmd256_mod_init+0x0/0x12 @ 1
initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  rmd320_mod_init+0x0/0x12 @ 1
initcall rmd320_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  sha256_generic_mod_init+0x0/0x48 @ 1
initcall sha256_generic_mod_init+0x0/0x48 returned 0 after 3255 usecs
calling  wp512_mod_init+0x0/0x80 @ 1
initcall wp512_mod_init+0x0/0x80 returned 0 after 0 usecs
calling  tgr192_mod_init+0x0/0x72 @ 1
initcall tgr192_mod_init+0x0/0x72 returned 0 after 0 usecs
calling  crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_pcbc_module_init+0x0/0x12 @ 1
initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_cts_module_init+0x0/0x12 @ 1
initcall crypto_cts_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_ctr_module_init+0x0/0x44 @ 1
initcall crypto_ctr_module_init+0x0/0x44 returned 0 after 0 usecs
calling  crypto_gcm_module_init+0x0/0x62 @ 1
initcall crypto_gcm_module_init+0x0/0x62 returned 0 after 0 usecs
calling  crypto_ccm_module_init+0x0/0x62 @ 1
initcall crypto_ccm_module_init+0x0/0x62 returned 0 after 0 usecs
calling  cryptd_init+0x0/0x126 @ 1
initcall cryptd_init+0x0/0x126 returned 0 after 0 usecs
calling  des_generic_mod_init+0x0/0x44 @ 1
initcall des_generic_mod_init+0x0/0x44 returned 0 after 0 usecs
calling  blowfish_mod_init+0x0/0x12 @ 1
initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  twofish_mod_init+0x0/0x12 @ 1
initcall twofish_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 0 usecs
calling  camellia_init+0x0/0x12 @ 1
initcall camellia_init+0x0/0x12 returned 0 after 0 usecs
calling  cast5_mod_init+0x0/0x12 @ 1
initcall cast5_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  arc4_init+0x0/0x12 @ 1
initcall arc4_init+0x0/0x12 returned 0 after 0 usecs
calling  khazad_mod_init+0x0/0x12 @ 1
initcall khazad_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  anubis_mod_init+0x0/0x12 @ 1
initcall anubis_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  seed_init+0x0/0x12 @ 1
initcall seed_init+0x0/0x12 returned 0 after 0 usecs
calling  deflate_mod_init+0x0/0x12 @ 1
initcall deflate_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  michael_mic_init+0x0/0x12 @ 1
initcall michael_mic_init+0x0/0x12 returned 0 after 0 usecs
calling  crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_authenc_module_init+0x0/0x12 @ 1
initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs
calling  krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 0 usecs
calling  prng_mod_init+0x0/0x36 @ 1
alg: No test for stdrng (ansi_cprng)
initcall prng_mod_init+0x0/0x36 returned 0 after 3255 usecs
calling  proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 0 usecs
calling  bsg_init+0x0/0x12f @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x12f returned 0 after 3255 usecs
calling  noop_init+0x0/0x14 @ 1
io scheduler noop registered (default)
initcall noop_init+0x0/0x14 returned 0 after 3255 usecs
calling  as_init+0x0/0x14 @ 1
io scheduler anticipatory registered
initcall as_init+0x0/0x14 returned 0 after 3255 usecs
calling  deadline_init+0x0/0x19 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x19 returned 0 after 3255 usecs
calling  cfq_init+0x0/0x99 @ 1
io scheduler cfq registered
initcall cfq_init+0x0/0x99 returned 0 after 0 usecs
calling  debug_objects_init_debugfs+0x0/0x6e @ 1
initcall debug_objects_init_debugfs+0x0/0x6e returned 0 after 0 usecs
calling  libcrc32c_mod_init+0x0/0x2c @ 1
initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
calling  init_kmp+0x0/0x12 @ 1
initcall init_kmp+0x0/0x12 returned 0 after 0 usecs
calling  percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after 0 usecs
calling  pci_init+0x0/0x47 @ 1
pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:00.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:01.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:01.1: calling pci_fixup_video+0x0/0xce
pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:02.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:02.1: calling pci_fixup_video+0x0/0xce
pci 0000:00:04.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:04.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:06.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:09.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x98
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x90
pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x98
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x90
pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x98
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x90
pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x98
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x90
pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:18.0: calling pci_fixup_video+0x0/0xce
pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:18.1: calling pci_fixup_video+0x0/0xce
pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:18.2: calling pci_fixup_video+0x0/0xce
pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:00:18.3: calling pci_fixup_video+0x0/0xce
pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:05:07.0: calling pci_fixup_video+0x0/0xce
pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:01:00.0: calling pci_fixup_video+0x0/0xce
pci 0000:01:00.0: Boot video device
pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x410
pci 0000:01:00.1: calling pci_fixup_video+0x0/0xce
initcall pci_init+0x0/0x47 returned 0 after 319010 usecs
calling  pci_proc_init+0x0/0x7b @ 1
initcall pci_proc_init+0x0/0x7b returned 0 after 0 usecs
calling  pcie_portdrv_init+0x0/0x58 @ 1
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:0d.0: setting latency timer to 64
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x58 returned 0 after 42317 usecs
calling  aer_service_init+0x0/0x29 @ 1
initcall aer_service_init+0x0/0x29 returned 0 after 0 usecs
calling  pci_hotplug_init+0x0/0x51 @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x51 returned 0 after 3255 usecs
calling  pcied_init+0x0/0x7d @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x7d returned 0 after 3255 usecs
calling  zt5550_init+0x0/0x84 @ 1
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
initcall zt5550_init+0x0/0x84 returned 0 after 3255 usecs
calling  cpcihp_generic_init+0x0/0x4f2 @ 1
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
initcall cpcihp_generic_init+0x0/0x4f2 returned -22 after 6510 usecs
initcall cpcihp_generic_init+0x0/0x4f2 returned with error code -22 
calling  shpcd_init+0x0/0x68 @ 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x68 returned 0 after 3255 usecs
calling  pci_stub_init+0x0/0x24 @ 1
initcall pci_stub_init+0x0/0x24 returned 0 after 0 usecs
calling  platform_lcd_init+0x0/0x12 @ 1
initcall platform_lcd_init+0x0/0x12 returned 0 after 0 usecs
calling  genericbl_init+0x0/0x12 @ 1
initcall genericbl_init+0x0/0x12 returned 0 after 0 usecs
calling  progearbl_init+0x0/0x5c @ 1
ALI M7101 PMU not found.
initcall progearbl_init+0x0/0x5c returned 0 after 3255 usecs
calling  cr_backlight_init+0x0/0x76 @ 1
INTEL CARILLO RANCH LPC not found.
Carillo Ranch Backlight Driver Initialized.
initcall cr_backlight_init+0x0/0x76 returned 0 after 6510 usecs
calling  mbp_init+0x0/0xfa @ 1
initcall mbp_init+0x0/0xfa returned -19 after 0 usecs
calling  kb3886_init+0x0/0x3c @ 1
initcall kb3886_init+0x0/0x3c returned -19 after 0 usecs
calling  display_class_init+0x0/0x7e @ 1
initcall display_class_init+0x0/0x7e returned 0 after 0 usecs
calling  arcfb_init+0x0/0x7a @ 1
initcall arcfb_init+0x0/0x7a returned -6 after 0 usecs
initcall arcfb_init+0x0/0x7a returned with error code -6 
calling  cyber2000fb_init+0x0/0xdb @ 1
initcall cyber2000fb_init+0x0/0xdb returned 0 after 3255 usecs
calling  pm2fb_init+0x0/0x154 @ 1
initcall pm2fb_init+0x0/0x154 returned 0 after 0 usecs
calling  pm3fb_init+0x0/0x110 @ 1
initcall pm3fb_init+0x0/0x110 returned 0 after 0 usecs
calling  nvidiafb_init+0x0/0x2bb @ 1
nvidiafb_setup START
initcall nvidiafb_init+0x0/0x2bb returned 0 after 3255 usecs
calling  atyfb_init+0x0/0x1f9 @ 1
initcall atyfb_init+0x0/0x1f9 returned 0 after 0 usecs
calling  sisfb_init+0x0/0x825 @ 1
initcall sisfb_init+0x0/0x825 returned 0 after 0 usecs
calling  viafb_init+0x0/0x1259 @ 1
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
ioremap failed
initcall viafb_init+0x0/0x1259 returned -1 after 7659505 usecs
initcall viafb_init+0x0/0x1259 returned with error code -1 
calling  savagefb_init+0x0/0x77 @ 1
initcall savagefb_init+0x0/0x77 returned 0 after 0 usecs
calling  gx1fb_init+0x0/0x14e @ 1
initcall gx1fb_init+0x0/0x14e returned 0 after 0 usecs
calling  gxfb_init+0x0/0x94 @ 1
initcall gxfb_init+0x0/0x94 returned 0 after 0 usecs
calling  lxfb_init+0x0/0x104 @ 1
initcall lxfb_init+0x0/0x104 returned 0 after 0 usecs
calling  neofb_init+0x0/0x14b @ 1
initcall neofb_init+0x0/0x14b returned 0 after 0 usecs
calling  tdfxfb_init+0x0/0x13d @ 1
initcall tdfxfb_init+0x0/0x13d returned 0 after 0 usecs
calling  imsttfb_init+0x0/0x131 @ 1
initcall imsttfb_init+0x0/0x131 returned 0 after 0 usecs
calling  vt8623fb_init+0x0/0x59 @ 1
initcall vt8623fb_init+0x0/0x59 returned 0 after 0 usecs
calling  tridentfb_init+0x0/0x1f9 @ 1
initcall tridentfb_init+0x0/0x1f9 returned 0 after 0 usecs
calling  vmlfb_init+0x0/0x9a @ 1
vmlfb: initializing
initcall vmlfb_init+0x0/0x9a returned 0 after 3255 usecs
calling  cr_pll_init+0x0/0x10a @ 1
Could not find Carillo Ranch MCH device.
initcall cr_pll_init+0x0/0x10a returned -19 after 3255 usecs
calling  s3fb_init+0x0/0xfb @ 1
initcall s3fb_init+0x0/0xfb returned 0 after 0 usecs
calling  sstfb_init+0x0/0x1ce @ 1
initcall sstfb_init+0x0/0x1ce returned 0 after 0 usecs
calling  s1d13xxxfb_init+0x0/0x2d @ 1
initcall s1d13xxxfb_init+0x0/0x2d returned 0 after 0 usecs
calling  mb862xxfb_init+0x0/0x20 @ 1
initcall mb862xxfb_init+0x0/0x20 returned 0 after 0 usecs
calling  uvesafb_init+0x0/0x3d0 @ 1
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
initcall uvesafb_init+0x0/0x3d0 returned 0 after 22786 usecs
calling  regulator_virtual_consumer_init+0x0/0x12 @ 1
initcall regulator_virtual_consumer_init+0x0/0x12 returned 0 after 0 usecs
calling  regulator_userspace_consumer_init+0x0/0x12 @ 1
initcall regulator_userspace_consumer_init+0x0/0x12 returned 0 after 0 usecs
calling  bq24022_init+0x0/0x19 @ 1
initcall bq24022_init+0x0/0x19 returned -19 after 0 usecs
calling  lp3971_module_init+0x0/0x38 @ 1
initcall lp3971_module_init+0x0/0x38 returned 0 after 0 usecs
calling  rand_initialize+0x0/0x40 @ 1
initcall rand_initialize+0x0/0x40 returned 0 after 0 usecs
calling  tty_init+0x0/0xfa @ 1
initcall tty_init+0x0/0xfa returned 0 after 13020 usecs
calling  pty_init+0x0/0x3cb @ 1
initcall pty_init+0x0/0x3cb returned 0 after 0 usecs
calling  sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 0 usecs
calling  nozomi_init+0x0/0x162 @ 1
Initializing Nozomi driver 2.1d (build date: Jun 16 2009 12:02:45)
initcall nozomi_init+0x0/0x162 returned 0 after 6510 usecs
calling  raw_init+0x0/0xdf @ 1
initcall raw_init+0x0/0xdf returned 0 after 0 usecs
calling  lp_init_module+0x0/0x275 @ 1
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x275 returned 0 after 3255 usecs
calling  applicom_init+0x0/0x525 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x525 returned -6 after 9765 usecs
initcall applicom_init+0x0/0x525 returned with error code -6 
calling  nvram_init+0x0/0x8b @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x8b returned 0 after 3255 usecs
calling  i8k_init+0x0/0x3ed @ 1
initcall i8k_init+0x0/0x3ed returned -19 after 0 usecs
calling  pc8736x_gpio_init+0x0/0x419 @ 1
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
initcall pc8736x_gpio_init+0x0/0x419 returned -19 after 6510 usecs
calling  nsc_gpio_init+0x0/0x16 @ 1
nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x16 returned 0 after 0 usecs
calling  tlclk_init+0x0/0x22f @ 1
telclk_interrup = 0xf non-mcpbl0010 hw.
initcall tlclk_init+0x0/0x22f returned -6 after 3255 usecs
initcall tlclk_init+0x0/0x22f returned with error code -6 
calling  ipmi_init_msghandler_mod+0x0/0xd @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 3255 usecs
calling  init_ipmi_devintf+0x0/0x107 @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0x107 returned 0 after 3255 usecs
calling  init_ipmi_si+0x0/0x7a0 @ 1
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x7a0 returned -19 after 48828 usecs
calling  ipmi_poweroff_init+0x0/0xa0 @ 1
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
initcall ipmi_poweroff_init+0x0/0xa0 returned 0 after 3255 usecs
calling  hangcheck_init+0x0/0x9f @ 1
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
initcall hangcheck_init+0x0/0x9f returned 0 after 6510 usecs
calling  init_nsc+0x0/0x1fa @ 1
initcall init_nsc+0x0/0x1fa returned -19 after 0 usecs
calling  init_atmel+0x0/0x17a @ 1
Platform driver 'tpm_atmel' needs updating - please use dev_pm_ops
initcall init_atmel+0x0/0x17a returned -19 after 3255 usecs
calling  drm_core_init+0x0/0x136 @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x136 returned 0 after 6510 usecs
calling  tdfx_init+0x0/0x12 @ 1
initcall tdfx_init+0x0/0x12 returned 0 after 0 usecs
calling  r128_init+0x0/0x1e @ 1
initcall r128_init+0x0/0x1e returned 0 after 3255 usecs
calling  radeon_init+0x0/0x1e @ 1
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
initcall radeon_init+0x0/0x1e returned 0 after 16276 usecs
calling  mga_init+0x0/0x1e @ 1
initcall mga_init+0x0/0x1e returned 0 after 0 usecs
calling  savage_init+0x0/0x1e @ 1
initcall savage_init+0x0/0x1e returned 0 after 0 usecs
calling  cn_proc_init+0x0/0x4a @ 1
initcall cn_proc_init+0x0/0x4a returned 0 after 0 usecs
calling  serial8250_init+0x0/0x155 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
�serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Platform driver 'serial8250' needs updating - please use dev_pm_ops
initcall serial8250_init+0x0/0x155 returned 0 after 263671 usecs
calling  serial8250_pci_init+0x0/0x26 @ 1
initcall serial8250_pci_init+0x0/0x26 returned 0 after 0 usecs
calling  jsm_init_module+0x0/0x4d @ 1
initcall jsm_init_module+0x0/0x4d returned 0 after 0 usecs
calling  init_kgdboc+0x0/0x1b @ 1
initcall init_kgdboc+0x0/0x1b returned 0 after 0 usecs
calling  parport_default_proc_register+0x0/0x20 @ 1
initcall parport_default_proc_register+0x0/0x20 returned 0 after 0 usecs
calling  parport_pc_init+0x0/0x188 @ 1
parport0: PC-style at 0x378 (0x778)async_waiting @ 1
async_continuing @ 1 after 0 usec
 [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
initcall parport_pc_init+0x0/0x188 returned 0 after 218098 usecs
calling  parport_serial_init+0x0/0x27 @ 1
initcall parport_serial_init+0x0/0x27 returned 0 after 0 usecs
calling  topology_sysfs_init+0x0/0xac @ 1
initcall topology_sysfs_init+0x0/0xac returned 0 after 0 usecs
calling  cpqarray_init+0x0/0x2c7 @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x2c7 returned -19 after 3255 usecs
calling  pkt_init+0x0/0x222 @ 1
initcall pkt_init+0x0/0x222 returned 0 after 0 usecs
calling  mm_init+0x0/0x1ca @ 1
MM: desc_per_page = 128
initcall mm_init+0x0/0x1ca returned 0 after 3255 usecs
calling  nbd_init+0x0/0x340 @ 1
nbd: registered device at major 43
initcall nbd_init+0x0/0x340 returned 0 after 13020 usecs
calling  ub_init+0x0/0x92 @ 1
usbcore: registered new interface driver ub
initcall ub_init+0x0/0x92 returned 0 after 3255 usecs
calling  ioc4_init+0x0/0x20 @ 1
initcall ioc4_init+0x0/0x20 returned 0 after 0 usecs
calling  enclosure_init+0x0/0x19 @ 1
initcall enclosure_init+0x0/0x19 returned 0 after 0 usecs
calling  ilo_init+0x0/0x97 @ 1
initcall ilo_init+0x0/0x97 returned 0 after 0 usecs
calling  isl29003_init+0x0/0x14 @ 1
initcall isl29003_init+0x0/0x14 returned 0 after 0 usecs
calling  c2port_init+0x0/0x52 @ 1
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
initcall c2port_init+0x0/0x52 returned 0 after 3255 usecs
calling  duramar2150_c2port_init+0x0/0x72 @ 1
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
initcall duramar2150_c2port_init+0x0/0x72 returned 0 after 6510 usecs
calling  at24_init+0x0/0x33 @ 1
initcall at24_init+0x0/0x33 returned 0 after 0 usecs
calling  eeprom_init+0x0/0x14 @ 1
initcall eeprom_init+0x0/0x14 returned 0 after 3255 usecs
calling  cb710_init_module+0x0/0x1b @ 1
initcall cb710_init_module+0x0/0x1b returned 0 after 0 usecs
calling  scsi_tgt_init+0x0/0x90 @ 1
initcall scsi_tgt_init+0x0/0x90 returned 0 after 0 usecs
calling  spi_transport_init+0x0/0x30 @ 1
initcall spi_transport_init+0x0/0x30 returned 0 after 0 usecs
calling  fc_transport_init+0x0/0x4e @ 1
initcall fc_transport_init+0x0/0x4e returned 0 after 0 usecs
calling  iscsi_transport_init+0x0/0x157 @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x157 returned 0 after 3255 usecs
calling  sas_transport_init+0x0/0xbf @ 1
initcall sas_transport_init+0x0/0xbf returned 0 after 0 usecs
calling  sas_class_init+0x0/0x31 @ 1
initcall sas_class_init+0x0/0x31 returned 0 after 0 usecs
calling  scsi_dh_init+0x0/0x42 @ 1
initcall scsi_dh_init+0x0/0x42 returned 0 after 0 usecs
calling  rdac_init+0x0/0x34 @ 1
rdac: device handler registered
initcall rdac_init+0x0/0x34 returned 0 after 3255 usecs
calling  ahc_linux_init+0x0/0x74 @ 1
initcall ahc_linux_init+0x0/0x74 returned 0 after 0 usecs
calling  init_st+0x0/0x1c8 @ 1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
initcall init_st+0x0/0x1c8 returned 0 after 6510 usecs
calling  init_sd+0x0/0x140 @ 1
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0x140 returned 0 after 3255 usecs
calling  init_sg+0x0/0x14d @ 1
initcall init_sg+0x0/0x14d returned 0 after 0 usecs
calling  osd_uld_init+0x0/0xd6 @ 1
Driver 'osd' needs updating - please use bus_type methods
osd: LOADED open-osd 0.1.0
initcall osd_uld_init+0x0/0xd6 returned 0 after 3255 usecs
calling  ahci_init+0x0/0x1b @ 1
initcall ahci_init+0x0/0x1b returned 0 after 0 usecs
calling  k2_sata_init+0x0/0x1b @ 1
initcall k2_sata_init+0x0/0x1b returned 0 after 0 usecs
calling  piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 0 usecs
calling  qs_ata_init+0x0/0x1b @ 1
initcall qs_ata_init+0x0/0x1b returned 0 after 0 usecs
calling  sil24_init+0x0/0x1b @ 1
initcall sil24_init+0x0/0x1b returned 0 after 0 usecs
calling  svia_init+0x0/0x1b @ 1
initcall svia_init+0x0/0x1b returned 0 after 0 usecs
calling  vsc_sata_init+0x0/0x1b @ 1
initcall vsc_sata_init+0x0/0x1b returned 0 after 0 usecs
calling  sis_init+0x0/0x1b @ 1
initcall sis_init+0x0/0x1b returned 0 after 0 usecs
calling  pdc_sata_init+0x0/0x1b @ 1
initcall pdc_sata_init+0x0/0x1b returned 0 after 0 usecs
calling  nv_init+0x0/0x1b @ 1
initcall nv_init+0x0/0x1b returned 0 after 0 usecs
calling  uli_init+0x0/0x1b @ 1
initcall uli_init+0x0/0x1b returned 0 after 3255 usecs
calling  ali_init+0x0/0x53 @ 1
initcall ali_init+0x0/0x53 returned 0 after 0 usecs
calling  amd_init+0x0/0x1b @ 1
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48 
ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata1.00: configured for UDMA/100
async_waiting @ 1
async_continuing @ 1 after 0 usec
scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
async_waiting @ 1
async_continuing @ 1 after 0 usec
ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
ata2.01: configured for UDMA/33
async_waiting @ 1
async_continuing @ 1 after 0 usec
scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
scsi 1:0:1:0: Attached scsi generic sg1 type 5
initcall amd_init+0x0/0x1b returned 0 after 533854 usecs
calling  artop_init+0x0/0x1b @ 1
initcall artop_init+0x0/0x1b returned 0 after 0 usecs
calling  atiixp_init+0x0/0x1b @ 1
initcall atiixp_init+0x0/0x1b returned 0 after 0 usecs
calling  cmd640_init+0x0/0x1b @ 1
initcall cmd640_init+0x0/0x1b returned 0 after 0 usecs
calling  cmd64x_init+0x0/0x1b @ 1
initcall cmd64x_init+0x0/0x1b returned 0 after 0 usecs
calling  cs5520_init+0x0/0x1b @ 1
initcall cs5520_init+0x0/0x1b returned 0 after 0 usecs
calling  cs5530_init+0x0/0x1b @ 1
initcall cs5530_init+0x0/0x1b returned 0 after 0 usecs
calling  efar_init+0x0/0x1b @ 1
initcall efar_init+0x0/0x1b returned 0 after 3255 usecs
calling  hpt36x_init+0x0/0x1b @ 1
initcall hpt36x_init+0x0/0x1b returned 0 after 0 usecs
calling  hpt3x2n_init+0x0/0x1b @ 1
initcall hpt3x2n_init+0x0/0x1b returned 0 after 0 usecs
calling  it821x_init+0x0/0x1b @ 1
initcall it821x_init+0x0/0x1b returned 0 after 0 usecs
calling  it8213_init+0x0/0x1b @ 1
initcall it8213_init+0x0/0x1b returned 0 after 0 usecs
calling  netcell_init+0x0/0x1b @ 1
initcall netcell_init+0x0/0x1b returned 0 after 0 usecs
calling  ninja32_init+0x0/0x1b @ 1
initcall ninja32_init+0x0/0x1b returned 0 after 3255 usecs
calling  ns87410_init+0x0/0x1b @ 1
initcall ns87410_init+0x0/0x1b returned 0 after 0 usecs
calling  ns87415_init+0x0/0x1b @ 1
initcall ns87415_init+0x0/0x1b returned 0 after 0 usecs
calling  opti_init+0x0/0x1b @ 1
initcall opti_init+0x0/0x1b returned 0 after 0 usecs
calling  marvell_init+0x0/0x1b @ 1
initcall marvell_init+0x0/0x1b returned 0 after 0 usecs
calling  oldpiix_init+0x0/0x1b @ 1
initcall oldpiix_init+0x0/0x1b returned 0 after 0 usecs
calling  pdc2027x_init+0x0/0x1b @ 1
initcall pdc2027x_init+0x0/0x1b returned 0 after 0 usecs
calling  pdc202xx_init+0x0/0x1b @ 1
initcall pdc202xx_init+0x0/0x1b returned 0 after 0 usecs
calling  radisys_init+0x0/0x1b @ 1
initcall radisys_init+0x0/0x1b returned 0 after 0 usecs
calling  rz1000_init+0x0/0x1b @ 1
initcall rz1000_init+0x0/0x1b returned 0 after 0 usecs
calling  sc1200_init+0x0/0x1b @ 1
initcall sc1200_init+0x0/0x1b returned 0 after 0 usecs
calling  serverworks_init+0x0/0x1b @ 1
initcall serverworks_init+0x0/0x1b returned 0 after 0 usecs
calling  sil680_init+0x0/0x1b @ 1
initcall sil680_init+0x0/0x1b returned 0 after 0 usecs
calling  via_init+0x0/0x1b @ 1
initcall via_init+0x0/0x1b returned 0 after 0 usecs
calling  sis_init+0x0/0x1b @ 1
initcall sis_init+0x0/0x1b returned 0 after 3255 usecs
calling  pata_platform_init+0x0/0x1a @ 1
initcall pata_platform_init+0x0/0x1a returned 0 after 0 usecs
calling  e1000_init_module+0x0/0x70 @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
initcall e1000_init_module+0x0/0x70 returned 0 after 6510 usecs
calling  igbvf_init_module+0x0/0x70 @ 1
Intel(R) Virtual Function Network Driver - version 1.0.0-k0
Copyright (c) 2009 Intel Corporation.
initcall igbvf_init_module+0x0/0x70 returned 0 after 6510 usecs
calling  ixgbe_init_module+0x0/0x5a @ 1
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2
ixgbe: Copyright (c) 1999-2009 Intel Corporation.
initcall ixgbe_init_module+0x0/0x5a returned 0 after 6510 usecs
calling  ixgb_init_module+0x0/0x4c @ 1
Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
Copyright (c) 1999-2008 Intel Corporation.
initcall ixgb_init_module+0x0/0x4c returned 0 after 6510 usecs
calling  ipg_init_module+0x0/0x1b @ 1
initcall ipg_init_module+0x0/0x1b returned 0 after 0 usecs
calling  cxgb3_init_module+0x0/0x20 @ 1
initcall cxgb3_init_module+0x0/0x20 returned 0 after 0 usecs
calling  vcan_init_module+0x0/0x3a @ 1
vcan: Virtual CAN interface driver
initcall vcan_init_module+0x0/0x3a returned 0 after 3255 usecs
calling  can_dev_init+0x0/0x34 @ 1
CAN device driver interface
initcall can_dev_init+0x0/0x34 returned 0 after 0 usecs
calling  sja1000_init+0x0/0x1d @ 1
sja1000 CAN netdevice driver
initcall sja1000_init+0x0/0x1d returned 0 after 0 usecs
calling  sp_init+0x0/0x12 @ 1
initcall sp_init+0x0/0x12 returned 0 after 0 usecs
calling  kvaser_pci_init+0x0/0x1b @ 1
initcall kvaser_pci_init+0x0/0x1b returned 0 after 0 usecs
calling  atl1_init_module+0x0/0x1b @ 1
initcall atl1_init_module+0x0/0x1b returned 0 after 0 usecs
calling  atl1e_init_module+0x0/0x1b @ 1
initcall atl1e_init_module+0x0/0x1b returned 0 after 0 usecs
calling  enic_init_module+0x0/0x37 @ 1
enic: Cisco 10G Ethernet Driver, ver 1.0.0.933
initcall enic_init_module+0x0/0x37 returned 0 after 3255 usecs
calling  plip_init+0x0/0x61 @ 1
plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, not using IRQ.
initcall plip_init+0x0/0x61 returned 0 after 13020 usecs
calling  happy_meal_probe+0x0/0x1b @ 1
initcall happy_meal_probe+0x0/0x1b returned 0 after 0 usecs
calling  cas_init+0x0/0x3d @ 1
initcall cas_init+0x0/0x3d returned 0 after 0 usecs
calling  vortex_init+0x0/0xc3 @ 1
initcall vortex_init+0x0/0xc3 returned 0 after 0 usecs
calling  typhoon_init+0x0/0x1b @ 1
initcall typhoon_init+0x0/0x1b returned 0 after 0 usecs
calling  ne2k_pci_init+0x0/0x1b @ 1
initcall ne2k_pci_init+0x0/0x1b returned 0 after 0 usecs
calling  e100_init_module+0x0/0x5f @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5f returned 0 after 6510 usecs
calling  tlan_probe+0x0/0xec @ 1
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0  EISA: 0
initcall tlan_probe+0x0/0xec returned -19 after 6510 usecs
calling  epic_init+0x0/0x1b @ 1
initcall epic_init+0x0/0x1b returned 0 after 0 usecs
calling  sis190_init_module+0x0/0x1b @ 1
initcall sis190_init_module+0x0/0x1b returned 0 after 0 usecs
calling  sis900_init_module+0x0/0x1b @ 1
initcall sis900_init_module+0x0/0x1b returned 0 after 0 usecs
calling  yellowfin_init+0x0/0x1b @ 1
initcall yellowfin_init+0x0/0x1b returned 0 after 0 usecs
calling  acenic_init+0x0/0x1b @ 1
initcall acenic_init+0x0/0x1b returned 0 after 3255 usecs
calling  ns83820_init+0x0/0x29 @ 1
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
initcall ns83820_init+0x0/0x29 returned 0 after 3255 usecs
calling  fealnx_init+0x0/0x1b @ 1
initcall fealnx_init+0x0/0x1b returned 0 after 0 usecs
calling  tg3_init+0x0/0x1b @ 1
initcall tg3_init+0x0/0x1b returned 0 after 0 usecs
calling  bnx2_init+0x0/0x1b @ 1
initcall bnx2_init+0x0/0x1b returned 0 after 0 usecs
calling  bnx2x_init+0x0/0x87 @ 1
initcall bnx2x_init+0x0/0x87 returned 0 after 0 usecs
calling  skge_init_module+0x0/0x59 @ 1
initcall skge_init_module+0x0/0x59 returned 0 after 0 usecs
calling  sky2_init_module+0x0/0x57 @ 1
sky2 driver version 1.22
initcall sky2_init_module+0x0/0x57 returned 0 after 0 usecs
calling  skfd_init+0x0/0x1b @ 1
initcall skfd_init+0x0/0x1b returned 0 after 0 usecs
calling  rhine_init+0x0/0x6d @ 1
initcall rhine_init+0x0/0x6d returned 0 after 0 usecs
calling  starfire_init+0x0/0x1d @ 1
initcall starfire_init+0x0/0x1d returned 0 after 0 usecs
calling  davicom_init+0x0/0x62 @ 1
initcall davicom_init+0x0/0x62 returned 0 after 0 usecs
calling  cicada_init+0x0/0x44 @ 1
initcall cicada_init+0x0/0x44 returned 0 after 0 usecs
calling  realtek_init+0x0/0x12 @ 1
initcall realtek_init+0x0/0x12 returned 0 after 0 usecs
calling  fixed_mdio_bus_init+0x0/0xd8 @ 1
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0xd8 returned 0 after 3255 usecs
calling  ste10Xp_init+0x0/0x22 @ 1
initcall ste10Xp_init+0x0/0x22 returned 0 after 0 usecs
calling  sundance_init+0x0/0x1b @ 1
initcall sundance_init+0x0/0x1b returned 0 after 0 usecs
calling  hamachi_init+0x0/0x1e @ 1
initcall hamachi_init+0x0/0x1e returned 0 after 0 usecs
calling  net_olddevs_init+0x0/0x9d @ 1
initcall net_olddevs_init+0x0/0x9d returned 0 after 0 usecs
calling  hp100_module_init+0x0/0x1b @ 1
initcall hp100_module_init+0x0/0x1b returned 0 after 0 usecs
calling  init_nic+0x0/0x1b @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall init_nic+0x0/0x1b returned 0 after 530598 usecs
calling  qlge_init_module+0x0/0x1b @ 1
initcall qlge_init_module+0x0/0x1b returned 0 after 0 usecs
calling  ppp_init+0x0/0xe4 @ 1
PPP generic driver version 2.4.2
initcall ppp_init+0x0/0xe4 returned 0 after 3255 usecs
calling  ppp_async_init+0x0/0x3b @ 1
initcall ppp_async_init+0x0/0x3b returned 0 after 0 usecs
calling  ppp_sync_init+0x0/0x3b @ 1
initcall ppp_sync_init+0x0/0x3b returned 0 after 0 usecs
calling  bsdcomp_init+0x0/0x34 @ 1
PPP BSD Compression module registered
initcall bsdcomp_init+0x0/0x34 returned 0 after 3255 usecs
calling  pppox_init+0x0/0x12 @ 1
NET: Registered protocol family 24
initcall pppox_init+0x0/0x12 returned 0 after 3255 usecs
calling  pppoe_init+0x0/0x8e @ 1
initcall pppoe_init+0x0/0x8e returned 0 after 0 usecs
calling  pppol2tp_init+0x0/0x85 @ 1
PPPoL2TP kernel driver, V1.0
initcall pppol2tp_init+0x0/0x85 returned 0 after 3255 usecs
calling  slip_init+0x0/0xbf @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xbf returned 0 after 6510 usecs
calling  dummy_init_module+0x0/0x100 @ 1
initcall dummy_init_module+0x0/0x100 returned 0 after 0 usecs
calling  ifb_init_module+0x0/0xed @ 1
initcall ifb_init_module+0x0/0xed returned 0 after 0 usecs
calling  macvlan_init_module+0x0/0x56 @ 1
initcall macvlan_init_module+0x0/0x56 returned 0 after 0 usecs
calling  dfx_init+0x0/0x20 @ 1
initcall dfx_init+0x0/0x20 returned 0 after 0 usecs
calling  cp_init+0x0/0x1b @ 1
<6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
initcall cp_init+0x0/0x1b returned 0 after 6510 usecs
calling  rtl8139_init_module+0x0/0x1b @ 1
8139too Fast Ethernet driver 0.9.28
8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
initcall rtl8139_init_module+0x0/0x1b returned 0 after 13020 usecs
calling  sc92031_init+0x0/0x1b @ 1
initcall sc92031_init+0x0/0x1b returned 0 after 0 usecs
calling  tun_init+0x0/0x98 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0x98 returned 0 after 6510 usecs
calling  veth_init+0x0/0x12 @ 1
initcall veth_init+0x0/0x12 returned 0 after 0 usecs
calling  rio_init+0x0/0x1b @ 1
initcall rio_init+0x0/0x1b returned 0 after 0 usecs
calling  amd8111e_init+0x0/0x1b @ 1
initcall amd8111e_init+0x0/0x1b returned 0 after 0 usecs
calling  s2io_starter+0x0/0x1b @ 1
initcall s2io_starter+0x0/0x1b returned 0 after 3255 usecs
calling  myri10ge_init_module+0x0/0x76 @ 1
myri10ge: Version 1.5.0-1.418
initcall myri10ge_init_module+0x0/0x76 returned 0 after 3255 usecs
calling  ethoc_init+0x0/0x12 @ 1
initcall ethoc_init+0x0/0x12 returned 0 after 0 usecs
calling  dnet_init+0x0/0x12 @ 1
initcall dnet_init+0x0/0x12 returned 0 after 0 usecs
calling  hdlc_module_init+0x0/0x45 @ 1
HDLC support module revision 1.22
initcall hdlc_module_init+0x0/0x45 returned 0 after 3255 usecs
calling  mod_init+0x0/0x14 @ 1
initcall mod_init+0x0/0x14 returned 0 after 0 usecs
calling  mod_init+0x0/0x14 @ 1
initcall mod_init+0x0/0x14 returned 0 after 0 usecs
calling  fst_init+0x0/0x4f @ 1
initcall fst_init+0x0/0x4f returned 0 after 0 usecs
calling  wanxl_init_module+0x0/0x1b @ 1
initcall wanxl_init_module+0x0/0x1b returned 0 after 0 usecs
calling  pci200_init_module+0x0/0x42 @ 1
initcall pci200_init_module+0x0/0x42 returned 0 after 0 usecs
calling  pc300_init_module+0x0/0x73 @ 1
initcall pc300_init_module+0x0/0x73 returned 0 after 0 usecs
calling  catc_init+0x0/0x3d @ 1
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
initcall catc_init+0x0/0x3d returned 0 after 6510 usecs
calling  pegasus_init+0x0/0x18d @ 1
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x18d returned 0 after 6510 usecs
calling  usb_rtl8150_init+0x0/0x29 @ 1
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
initcall usb_rtl8150_init+0x0/0x29 returned 0 after 6510 usecs
calling  hso_init+0x0/0x1ec @ 1
hso: drivers/net/usb/hso.c: 1.2 Option Wireless
usbcore: registered new interface driver hso
initcall hso_init+0x0/0x1ec returned 0 after 6510 usecs
calling  cdc_init+0x0/0x1b @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x1b returned 0 after 3255 usecs
calling  dm9601_init+0x0/0x1b @ 1
usbcore: registered new interface driver dm9601
initcall dm9601_init+0x0/0x1b returned 0 after 3255 usecs
calling  smsc95xx_init+0x0/0x1b @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_init+0x0/0x1b returned 0 after 3255 usecs
calling  usbnet_init+0x0/0x1b @ 1
usbcore: registered new interface driver gl620a
initcall usbnet_init+0x0/0x1b returned 0 after 3255 usecs
calling  net1080_init+0x0/0x1b @ 1
usbcore: registered new interface driver net1080
initcall net1080_init+0x0/0x1b returned 0 after 3255 usecs
calling  plusb_init+0x0/0x1b @ 1
usbcore: registered new interface driver plusb
initcall plusb_init+0x0/0x1b returned 0 after 3255 usecs
calling  rndis_init+0x0/0x1b @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_init+0x0/0x1b returned 0 after 3255 usecs
calling  mcs7830_init+0x0/0x1b @ 1
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
initcall mcs7830_init+0x0/0x1b returned 0 after 3255 usecs
calling  usbnet_init+0x0/0x2c @ 1
initcall usbnet_init+0x0/0x2c returned 0 after 0 usecs
calling  ipw2100_init+0x0/0x87 @ 1
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall ipw2100_init+0x0/0x87 returned 0 after 6510 usecs
calling  ieee80211_init+0x0/0xb8 @ 1
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
initcall ieee80211_init+0x0/0xb8 returned 0 after 6510 usecs
calling  strip_init_driver+0x0/0x6f @ 1
STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
initcall strip_init_driver+0x0/0x6f returned 0 after 3255 usecs
calling  init_orinoco+0x0/0x1d @ 1
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
initcall init_orinoco+0x0/0x1d returned 0 after 3255 usecs
calling  orinoco_plx_init+0x0/0x30 @ 1
orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
initcall orinoco_plx_init+0x0/0x30 returned 0 after 3255 usecs
calling  airo_init_module+0x0/0xf4 @ 1
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
initcall airo_init_module+0x0/0xf4 returned 0 after 6510 usecs
calling  atmel_init_module+0x0/0x1b @ 1
initcall atmel_init_module+0x0/0x1b returned 0 after 0 usecs
calling  hostap_init+0x0/0x47 @ 1
initcall hostap_init+0x0/0x47 returned 0 after 0 usecs
calling  init_prism2_plx+0x0/0x1b @ 1
initcall init_prism2_plx+0x0/0x1b returned 0 after 0 usecs
calling  init_prism2_pci+0x0/0x1b @ 1
initcall init_prism2_pci+0x0/0x1b returned 0 after 0 usecs
calling  zd1201_init+0x0/0x1b @ 1
usbcore: registered new interface driver zd1201
initcall zd1201_init+0x0/0x1b returned 0 after 3255 usecs
calling  lbs_init_module+0x0/0xe5 @ 1
initcall lbs_init_module+0x0/0xe5 returned 0 after 0 usecs
calling  if_sdio_init_module+0x0/0xeb @ 1
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
initcall if_sdio_init_module+0x0/0xeb returned 0 after 6510 usecs
calling  w840_init+0x0/0x29 @ 1
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
initcall w840_init+0x0/0x29 returned 0 after 3255 usecs
calling  de_init+0x0/0x1b @ 1
initcall de_init+0x0/0x1b returned 0 after 0 usecs
calling  de4x5_module_init+0x0/0x1b @ 1
initcall de4x5_module_init+0x0/0x1b returned 0 after 0 usecs
calling  init_netconsole+0x0/0x2a5 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x2a5 returned 0 after 3255 usecs
calling  niu_init+0x0/0x41 @ 1
initcall niu_init+0x0/0x41 returned 0 after 0 usecs
calling  init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 0 usecs
calling  efx_init_module+0x0/0xd7 @ 1
Solarflare NET driver v2.3
initcall efx_init_module+0x0/0xd7 returned 0 after 3255 usecs
calling  i2400m_driver_init+0x0/0x8 @ 1
initcall i2400m_driver_init+0x0/0x8 returned 0 after 0 usecs
calling  i2400ms_driver_init+0x0/0x12 @ 1
initcall i2400ms_driver_init+0x0/0x12 returned 0 after 0 usecs
calling  zatm_init_module+0x0/0x1b @ 1
initcall zatm_init_module+0x0/0x1b returned 0 after 0 usecs
calling  uPD98402_module_init+0x0/0x8 @ 1
initcall uPD98402_module_init+0x0/0x8 returned 0 after 0 usecs
calling  amb_module_init+0x0/0x1da @ 1
Madge ATM Ambassador driver version 1.2.4
amb: debug bitmap is 0
initcall amb_module_init+0x0/0x1da returned 0 after 6510 usecs
calling  eni_init+0x0/0x1b @ 1
initcall eni_init+0x0/0x1b returned 0 after 0 usecs
calling  idt77252_init+0x0/0x37 @ 1
idt77252_init: at ffffffff82532799
initcall idt77252_init+0x0/0x37 returned 0 after 3255 usecs
calling  solos_pci_init+0x0/0x30 @ 1
Solos PCI Driver Version 0.07
initcall solos_pci_init+0x0/0x30 returned 0 after 3255 usecs
calling  adummy_init+0x0/0x105 @ 1
adummy: version 1.0
initcall adummy_init+0x0/0x105 returned 0 after 0 usecs
calling  atmtcp_init+0x0/0x14 @ 1
initcall atmtcp_init+0x0/0x14 returned 0 after 0 usecs
calling  lanai_module_init+0x0/0x47 @ 1
initcall lanai_module_init+0x0/0x47 returned 0 after 0 usecs
calling  i2o_iop_init+0x0/0x62 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x62 returned 0 after 6510 usecs
calling  i2o_block_init+0x0/0x126 @ 1
I2O Block Device OSM v1.325
initcall i2o_block_init+0x0/0x126 returned 0 after 3255 usecs
calling  i2o_scsi_init+0x0/0x49 @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x49 returned 0 after 3255 usecs
calling  i2o_proc_init+0x0/0x20c @ 1
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x20c returned 0 after 3255 usecs
calling  fusion_init+0x0/0x140 @ 1
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0x140 returned 0 after 3255 usecs
calling  mptsas_init+0x0/0x10f @ 1
Fusion MPT SAS Host driver 3.04.10
initcall mptsas_init+0x0/0x10f returned 0 after 3255 usecs
calling  mptctl_init+0x0/0x122 @ 1
Fusion MPT misc device (ioctl) driver 3.04.10
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
initcall mptctl_init+0x0/0x122 returned 0 after 9765 usecs
calling  fw_core_init+0x0/0x89 @ 1
initcall fw_core_init+0x0/0x89 returned 0 after 0 usecs
calling  fw_ohci_init+0x0/0x1b @ 1
initcall fw_ohci_init+0x0/0x1b returned 0 after 0 usecs
calling  sbp2_init+0x0/0x46 @ 1
initcall sbp2_init+0x0/0x46 returned 0 after 0 usecs
calling  uio_init+0x0/0x8 @ 1
initcall uio_init+0x0/0x8 returned 0 after 0 usecs
calling  hilscher_init_module+0x0/0x1b @ 1
initcall hilscher_init_module+0x0/0x1b returned 0 after 0 usecs
calling  uio_pdrv_genirq_init+0x0/0x12 @ 1
initcall uio_pdrv_genirq_init+0x0/0x12 returned 0 after 0 usecs
calling  smx_ce_init_module+0x0/0x12 @ 1
initcall smx_ce_init_module+0x0/0x12 returned 0 after 0 usecs
calling  cdrom_init+0x0/0x6a @ 1
initcall cdrom_init+0x0/0x6a returned 0 after 0 usecs
calling  nonstatic_sysfs_init+0x0/0x12 @ 1
initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 0 usecs
calling  yenta_socket_init+0x0/0x24 @ 1
initcall yenta_socket_init+0x0/0x24 returned 0 after 3255 usecs
calling  aoe_init+0x0/0xb1 @ 1
aoe: AoE v47 initialised.
initcall aoe_init+0x0/0xb1 returned 0 after 3255 usecs
calling  uwb_subsys_init+0x0/0x5a @ 1
initcall uwb_subsys_init+0x0/0x5a returned 0 after 0 usecs
calling  wlp_subsys_init+0x0/0x8 @ 1
initcall wlp_subsys_init+0x0/0x8 returned 0 after 0 usecs
calling  umc_bus_init+0x0/0x12 @ 1
initcall umc_bus_init+0x0/0x12 returned 0 after 0 usecs
calling  whci_init+0x0/0x1b @ 1
initcall whci_init+0x0/0x1b returned 0 after 0 usecs
calling  whcrc_driver_init+0x0/0x1b @ 1
initcall whcrc_driver_init+0x0/0x1b returned 0 after 0 usecs
calling  hwarc_driver_init+0x0/0x1b @ 1
usbcore: registered new interface driver hwa-rc
initcall hwarc_driver_init+0x0/0x1b returned 0 after 3255 usecs
calling  i1480_dfu_driver_init+0x0/0x1b @ 1
usbcore: registered new interface driver i1480-dfu-usb
initcall i1480_dfu_driver_init+0x0/0x1b returned 0 after 3255 usecs
calling  i1480_est_init+0x0/0xa0 @ 1
initcall i1480_est_init+0x0/0xa0 returned 0 after 0 usecs
calling  mon_init+0x0/0x11d @ 1
initcall mon_init+0x0/0x11d returned 0 after 3255 usecs
calling  ehci_hcd_init+0x0/0x79 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
initcall ehci_hcd_init+0x0/0x79 returned 0 after 13020 usecs
calling  isp116x_init+0x0/0x42 @ 1
116x: driver isp116x-hcd, 03 Nov 2005
initcall isp116x_init+0x0/0x42 returned 0 after 3255 usecs
calling  ohci_hcd_mod_init+0x0/0x82 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
initcall ohci_hcd_mod_init+0x0/0x82 returned 0 after 16276 usecs
calling  uhci_hcd_init+0x0/0xd3 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xd3 returned 0 after 3255 usecs
calling  u132_hcd_init+0x0/0xba @ 1
driver u132_hcd built at 12:03:09 on Jun 16 2009
initcall u132_hcd_init+0x0/0xba returned 0 after 3255 usecs
calling  r8a66597_init+0x0/0x42 @ 1
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
initcall r8a66597_init+0x0/0x42 returned 0 after 3255 usecs
calling  isp1760_init+0x0/0x5a @ 1
initcall isp1760_init+0x0/0x5a returned 0 after 3255 usecs
calling  hwahc_driver_init+0x0/0x1b @ 1
usbcore: registered new interface driver hwa-hc
initcall hwahc_driver_init+0x0/0x1b returned 0 after 3255 usecs
calling  c67x00_init+0x0/0x12 @ 1
initcall c67x00_init+0x0/0x12 returned 0 after 0 usecs
calling  wusbcore_init+0x0/0x73 @ 1
initcall wusbcore_init+0x0/0x73 returned 0 after 0 usecs
calling  usblp_init+0x0/0x1b @ 1
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x1b returned 0 after 3255 usecs
calling  usbtmc_init+0x0/0x3d @ 1
usbcore: registered new interface driver usbtmc
initcall usbtmc_init+0x0/0x3d returned 0 after 3255 usecs
calling  usb_usual_init+0x0/0x43 @ 1
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x43 returned 0 after 3255 usecs
calling  usb_mdc800_init+0x0/0x3db @ 1
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x3db returned 0 after 6510 usecs
calling  usb_serial_init+0x0/0x281 @ 1
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
initcall usb_serial_init+0x0/0x281 returned 0 after 6510 usecs
calling  aircable_init+0x0/0x4d @ 1
USB Serial support registered for aircable
usbcore: registered new interface driver aircable
initcall aircable_init+0x0/0x4d returned 0 after 6510 usecs
calling  ark3116_init+0x0/0x4d @ 1
USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
initcall ark3116_init+0x0/0x4d returned 0 after 6510 usecs
calling  belkin_sa_init+0x0/0x5d @ 1
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
belkin_sa: v1.2:USB Belkin Serial converter driver
initcall belkin_sa_init+0x0/0x5d returned 0 after 9765 usecs
calling  ch341_init+0x0/0x4d @ 1
USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
initcall ch341_init+0x0/0x4d returned 0 after 6510 usecs
calling  cp210x_init+0x0/0x5d @ 1
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
initcall cp210x_init+0x0/0x5d returned 0 after 13020 usecs
calling  cyberjack_init+0x0/0x6b @ 1
USB Serial support registered for Reiner SCT Cyberjack USB card reader
usbcore: registered new interface driver cyberjack
cyberjack: v1.01 Matthias Bruestle
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
initcall cyberjack_init+0x0/0x6b returned 0 after 13020 usecs
calling  cypress_init+0x0/0xc9 @ 1
drivers/usb/serial/cypress_m8.c: cypress_init
USB Serial support registered for DeLorme Earthmate USB
USB Serial support registered for HID->COM RS232 Adapter
USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver cypress
cypress_m8: v1.09:Cypress USB to Serial Driver
initcall cypress_init+0x0/0xc9 returned 0 after 19531 usecs
calling  debug_init+0x0/0x4d @ 1
USB Serial support registered for debug
usbcore: registered new interface driver debug
initcall debug_init+0x0/0x4d returned 0 after 6510 usecs
calling  digi_init+0x0/0x7b @ 1
USB Serial support registered for Digi 2 port USB adapter
USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver digi_acceleport
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
initcall digi_init+0x0/0x7b returned 0 after 13020 usecs
calling  edgeport_init+0x0/0xc7 @ 1
USB Serial support registered for Edgeport 2 port adapter
USB Serial support registered for Edgeport 4 port adapter
USB Serial support registered for Edgeport 8 port adapter
USB Serial support registered for EPiC device
usbcore: registered new interface driver io_edgeport
io_edgeport: v2.7:Edgeport USB Serial Driver
initcall edgeport_init+0x0/0xc7 returned 0 after 22786 usecs
calling  empeg_init+0x0/0x172 @ 1
USB Serial support registered for empeg
usbcore: registered new interface driver empeg
empeg: v1.2:USB Empeg Mark I/II Driver
initcall empeg_init+0x0/0x172 returned 0 after 9765 usecs
calling  ftdi_init+0x0/0xe3 @ 1
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
initcall ftdi_init+0x0/0xe3 returned 0 after 9765 usecs
calling  funsoft_init+0x0/0x4d @ 1
USB Serial support registered for funsoft
usbcore: registered new interface driver funsoft
initcall funsoft_init+0x0/0x4d returned 0 after 6510 usecs
calling  garmin_init+0x0/0x5d @ 1
USB Serial support registered for Garmin GPS usb/tty
usbcore: registered new interface driver garmin_gps
garmin_gps: v0.31:garmin gps driver
initcall garmin_init+0x0/0x5d returned 0 after 9765 usecs
calling  hp49gp_init+0x0/0x5d @ 1
USB Serial support registered for hp4X
usbcore: registered new interface driver hp4X
hp4x: v1.00:HP4x (48/49) Generic Serial driver
initcall hp49gp_init+0x0/0x5d returned 0 after 9765 usecs
calling  ipaq_init+0x0/0x96 @ 1
USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver ipaq
ipaq: v0.5:USB PocketPC PDA driver
initcall ipaq_init+0x0/0x96 returned 0 after 9765 usecs
calling  usb_ipw_init+0x0/0x5d @ 1
USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: v0.3:IPWireless tty driver
initcall usb_ipw_init+0x0/0x5d returned 0 after 9765 usecs
calling  iuu_init+0x0/0x5d @ 1
USB Serial support registered for iuu_phoenix
usbcore: registered new interface driver iuu_phoenix
iuu_phoenix: v0.10:Infinity USB Unlimited Phoenix driver
initcall iuu_init+0x0/0x5d returned 0 after 9765 usecs
calling  keyspan_pda_init+0x0/0x99 @ 1
USB Serial support registered for Keyspan PDA
USB Serial support registered for Keyspan PDA - (prerenumeration)
USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
usbcore: registered new interface driver keyspan_pda
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
initcall keyspan_pda_init+0x0/0x99 returned 0 after 16276 usecs
calling  kobil_init+0x0/0x5d @ 1
USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobil
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
initcall kobil_init+0x0/0x5d returned 0 after 9765 usecs
calling  moschip7720_init+0x0/0x89 @ 1
USB Serial support registered for Moschip 2 port adapter
mos7720: 1.0.0.4F:Moschip USB Serial Driver
usbcore: registered new interface driver moschip7720
initcall moschip7720_init+0x0/0x89 returned 0 after 9765 usecs
calling  moschip7840_init+0x0/0xdd @ 1
USB Serial support registered for Moschip 7840/7820 USB Serial Driver
mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
usbcore: registered new interface driver mos7840
initcall moschip7840_init+0x0/0xdd returned 0 after 9765 usecs
calling  navman_init+0x0/0x4d @ 1
USB Serial support registered for navman
usbcore: registered new interface driver navman
initcall navman_init+0x0/0x4d returned 0 after 6510 usecs
calling  omninet_init+0x0/0x5d @ 1
USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninet
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
initcall omninet_init+0x0/0x5d returned 0 after 9765 usecs
calling  opticon_init+0x0/0x4d @ 1
USB Serial support registered for opticon
usbcore: registered new interface driver opticon
initcall opticon_init+0x0/0x4d returned 0 after 6510 usecs
calling  option_init+0x0/0x5d @ 1
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
initcall option_init+0x0/0x5d returned 0 after 9765 usecs
calling  oti6858_init+0x0/0x4d @ 1
USB Serial support registered for oti6858
usbcore: registered new interface driver oti6858
initcall oti6858_init+0x0/0x4d returned 0 after 6510 usecs
calling  qcinit+0x0/0x4d @ 1
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
initcall qcinit+0x0/0x4d returned 0 after 6510 usecs
calling  sierra_init+0x0/0x5d @ 1
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.3:USB Driver for Sierra Wireless USB modems
initcall sierra_init+0x0/0x5d returned 0 after 9765 usecs
calling  symbol_init+0x0/0x4d @ 1
USB Serial support registered for symbol
usbcore: registered new interface driver symbol
initcall symbol_init+0x0/0x4d returned 0 after 6510 usecs
calling  ti_init+0x0/0x16d @ 1
USB Serial support registered for TI USB 3410 1 port adapter
USB Serial support registered for TI USB 5052 2 port adapter
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver
initcall ti_init+0x0/0x16d returned 0 after 13020 usecs
calling  visor_init+0x0/0x1d0 @ 1
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
initcall visor_init+0x0/0x1d0 returned 0 after 16276 usecs
calling  whiteheat_init+0x0/0x7b @ 1
USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheat
whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
initcall whiteheat_init+0x0/0x7b returned 0 after 16276 usecs
calling  adu_init+0x0/0x9d @ 1
usbcore: registered new interface driver adutux
adutux adutux (see www.ontrak.net) v0.0.13
adutux is an experimental driver. Use at your own risk
initcall adu_init+0x0/0x9d returned 0 after 13020 usecs
calling  berry_init+0x0/0x1b @ 1
usbcore: registered new interface driver berry_charge
initcall berry_init+0x0/0x1b returned 0 after 3255 usecs
calling  cypress_init+0x0/0x3f @ 1
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_init+0x0/0x3f returned 0 after 3255 usecs
calling  ftdi_elan_init+0x0/0x16f @ 1
driver ftdi-elan built at 12:03:08 on Jun 16 2009
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x16f returned 0 after 6510 usecs
calling  usb_idmouse_init+0x0/0x4d @ 1
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
initcall usb_idmouse_init+0x0/0x4d returned 0 after 6510 usecs
calling  iowarrior_init+0x0/0x1b @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_init+0x0/0x1b returned 0 after 3255 usecs
calling  isight_firmware_init+0x0/0x1b @ 1
usbcore: registered new interface driver isight_firmware
initcall isight_firmware_init+0x0/0x1b returned 0 after 3255 usecs
calling  usb_lcd_init+0x0/0x3f @ 1
usbcore: registered new interface driver usblcd
initcall usb_lcd_init+0x0/0x3f returned 0 after 3255 usecs
calling  usb_led_init+0x0/0x3f @ 1
usbcore: registered new interface driver usbled
initcall usb_led_init+0x0/0x3f returned 0 after 3255 usecs
calling  usb_rio_init+0x0/0x3d @ 1
usbcore: registered new interface driver rio500
rio500: v1.1:USB Rio 500 driver
initcall usb_rio_init+0x0/0x3d returned 0 after 6510 usecs
calling  tv_init+0x0/0x4d @ 1
usbcore: registered new interface driver trancevibrator
trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
initcall tv_init+0x0/0x4d returned 0 after 6510 usecs
calling  uss720_init+0x0/0x67 @ 1
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
initcall uss720_init+0x0/0x67 returned 0 after 16276 usecs
calling  usb_sevseg_init+0x0/0x3f @ 1
usbcore: registered new interface driver usbsevseg
initcall usb_sevseg_init+0x0/0x3f returned 0 after 3255 usecs
calling  usb_sisusb_init+0x0/0x1b @ 1
usbcore: registered new interface driver sisusb
initcall usb_sisusb_init+0x0/0x1b returned 0 after 3255 usecs
calling  i8042_init+0x0/0x124 @ 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x124 returned 0 after 9765 usecs
calling  parkbd_init+0x0/0x1ed @ 1
parport0: cannot grant exclusive access for device parkbd
initcall parkbd_init+0x0/0x1ed returned -19 after 6510 usecs
calling  serport_init+0x0/0x39 @ 1
initcall serport_init+0x0/0x39 returned 0 after 0 usecs
calling  ct82c710_init+0x0/0x1b8 @ 1
initcall ct82c710_init+0x0/0x1b8 returned -19 after 0 usecs
calling  emu_init+0x0/0x1b @ 1
initcall emu_init+0x0/0x1b returned 0 after 3255 usecs
calling  mousedev_init+0x0/0x92 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x92 returned 0 after 3255 usecs
calling  joydev_init+0x0/0x12 @ 1
initcall joydev_init+0x0/0x12 returned 0 after 0 usecs
calling  atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 0 usecs
calling  sunkbd_init+0x0/0x1b @ 1
initcall sunkbd_init+0x0/0x1b returned 0 after 0 usecs
calling  lkkbd_init+0x0/0x1b @ 1
initcall lkkbd_init+0x0/0x1b returned 0 after 0 usecs
calling  skbd_init+0x0/0x1b @ 1
input: AT Translated Set 2 keyboard as /class/input/input0
initcall skbd_init+0x0/0x1b returned 0 after 0 usecs
calling  atp_init+0x0/0x1b @ 1
usbcore: registered new interface driver appletouch
initcall atp_init+0x0/0x1b returned 0 after 3255 usecs
calling  psmouse_init+0x0/0x77 @ 1
initcall psmouse_init+0x0/0x77 returned 0 after 0 usecs
calling  sermouse_init+0x0/0x28 @ 1
initcall sermouse_init+0x0/0x28 returned 0 after 0 usecs
calling  a3d_init+0x0/0x1b @ 1
initcall a3d_init+0x0/0x1b returned 0 after 0 usecs
calling  adi_init+0x0/0x1b @ 1
initcall adi_init+0x0/0x1b returned 0 after 0 usecs
calling  analog_init+0x0/0x124 @ 1
initcall analog_init+0x0/0x124 returned 0 after 0 usecs
calling  cobra_init+0x0/0x26 @ 1
initcall cobra_init+0x0/0x26 returned 0 after 0 usecs
calling  gc_init+0x0/0x8f7 @ 1
initcall gc_init+0x0/0x8f7 returned -19 after 0 usecs
calling  gf2k_init+0x0/0x1b @ 1
initcall gf2k_init+0x0/0x1b returned 0 after 0 usecs
calling  grip_init+0x0/0x1b @ 1
initcall grip_init+0x0/0x1b returned 0 after 0 usecs
calling  grip_init+0x0/0x1b @ 1
initcall grip_init+0x0/0x1b returned 0 after 0 usecs
calling  guillemot_init+0x0/0x1b @ 1
initcall guillemot_init+0x0/0x1b returned 0 after 0 usecs
calling  iforce_init+0x0/0x1b @ 1
usbcore: registered new interface driver iforce
initcall iforce_init+0x0/0x1b returned 0 after 0 usecs
calling  interact_init+0x0/0x1b @ 1
initcall interact_init+0x0/0x1b returned 0 after 0 usecs
calling  joydump_init+0x0/0x1b @ 1
initcall joydump_init+0x0/0x1b returned 0 after 0 usecs
calling  magellan_init+0x0/0x1b @ 1
initcall magellan_init+0x0/0x1b returned 0 after 0 usecs
calling  sw_init+0x0/0x1b @ 1
initcall sw_init+0x0/0x1b returned 0 after 0 usecs
calling  spaceball_init+0x0/0x1b @ 1
initcall spaceball_init+0x0/0x1b returned 0 after 0 usecs
calling  stinger_init+0x0/0x1b @ 1
initcall stinger_init+0x0/0x1b returned 0 after 0 usecs
calling  tgfx_init+0x0/0x5b1 @ 1
initcall tgfx_init+0x0/0x5b1 returned -19 after 0 usecs
calling  twidjoy_init+0x0/0x1b @ 1
initcall twidjoy_init+0x0/0x1b returned 0 after 3255 usecs
calling  warrior_init+0x0/0x1b @ 1
initcall warrior_init+0x0/0x1b returned 0 after 0 usecs
calling  usb_xpad_init+0x0/0x3d @ 1
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
initcall usb_xpad_init+0x0/0x3d returned 0 after 0 usecs
calling  zhenhua_init+0x0/0x1b @ 1
initcall zhenhua_init+0x0/0x1b returned 0 after 0 usecs
calling  walkera0701_init+0x0/0x333 @ 1
walkera0701: parport without interrupt
initcall walkera0701_init+0x0/0x333 returned -19 after 0 usecs
calling  usb_acecad_init+0x0/0x3d @ 1
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
initcall usb_acecad_init+0x0/0x3d returned 0 after 0 usecs
calling  aiptek_init+0x0/0x4b @ 1
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
initcall aiptek_init+0x0/0x4b returned 0 after 0 usecs
calling  gtco_init+0x0/0x54 @ 1
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x54 returned 0 after 0 usecs
calling  wacom_init+0x0/0x49 @ 1
usbcore: registered new interface driver wacom
wacom: v1.50:USB Wacom Graphire and Wacom Intuos tablet driver
initcall wacom_init+0x0/0x49 returned 0 after 0 usecs
calling  ati_remote_init+0x0/0x4d @ 1
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
initcall ati_remote_init+0x0/0x4d returned 0 after 0 usecs
calling  cm109_init+0x0/0x115 @ 1
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
initcall cm109_init+0x0/0x115 returned 0 after 0 usecs
calling  usb_keyspan_init+0x0/0x3f @ 1
usbcore: registered new interface driver keyspan_remote
initcall usb_keyspan_init+0x0/0x3f returned 0 after 0 usecs
calling  pcspkr_init+0x0/0x12 @ 1
Platform driver 'pcspkr' needs updating - please use dev_pm_ops
input: PC Speaker as /class/input/input1
initcall pcspkr_init+0x0/0x12 returned 0 after 0 usecs
calling  uinput_init+0x0/0x12 @ 1
initcall uinput_init+0x0/0x12 returned 0 after 0 usecs
calling  yealink_dev_init+0x0/0x3d @ 1
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
initcall yealink_dev_init+0x0/0x3d returned 0 after 0 usecs
calling  cmos_init+0x0/0x27 @ 1
rtc_cmos: dev (254:0)
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
initcall cmos_init+0x0/0x27 returned 0 after 3255 usecs
calling  ds1286_init+0x0/0x12 @ 1
initcall ds1286_init+0x0/0x12 returned 0 after 0 usecs
calling  ds1374_init+0x0/0x14 @ 1
initcall ds1374_init+0x0/0x14 returned 0 after 0 usecs
calling  ds1511_rtc_init+0x0/0x12 @ 1
initcall ds1511_rtc_init+0x0/0x12 returned 0 after 0 usecs
calling  ds1553_init+0x0/0x12 @ 1
initcall ds1553_init+0x0/0x12 returned 0 after 0 usecs
calling  ds1742_init+0x0/0x12 @ 1
initcall ds1742_init+0x0/0x12 returned 0 after 0 usecs
calling  fm3130_init+0x0/0x14 @ 1
initcall fm3130_init+0x0/0x14 returned 0 after 0 usecs
calling  isl1208_init+0x0/0x14 @ 1
initcall isl1208_init+0x0/0x14 returned 0 after 0 usecs
calling  m48t35_init+0x0/0x12 @ 1
initcall m48t35_init+0x0/0x12 returned 0 after 0 usecs
calling  bq4802_init+0x0/0x12 @ 1
initcall bq4802_init+0x0/0x12 returned 0 after 0 usecs
calling  max6900_init+0x0/0x14 @ 1
initcall max6900_init+0x0/0x14 returned 0 after 0 usecs
calling  pcf8563_init+0x0/0x14 @ 1
initcall pcf8563_init+0x0/0x14 returned 0 after 0 usecs
calling  pcf8583_init+0x0/0x14 @ 1
initcall pcf8583_init+0x0/0x14 returned 0 after 0 usecs
calling  test_init+0x0/0xbe @ 1
test: dev (254:1)
rtc-test rtc-test.0: rtc core: registered test as rtc1
test: dev (254:2)
rtc-test rtc-test.1: rtc core: registered test as rtc2
initcall test_init+0x0/0xbe returned 0 after 0 usecs
calling  twl4030_rtc_init+0x0/0x12 @ 1
initcall twl4030_rtc_init+0x0/0x12 returned 0 after 0 usecs
calling  v3020_init+0x0/0x12 @ 1
initcall v3020_init+0x0/0x12 returned 0 after 3255 usecs
calling  x1205_init+0x0/0x14 @ 1
initcall x1205_init+0x0/0x14 returned 0 after 0 usecs
calling  i2c_dev_init+0x0/0xac @ 1
i2c /dev entries driver
initcall i2c_dev_init+0x0/0xac returned 0 after 0 usecs
calling  i2c_ali1535_init+0x0/0x1b @ 1
initcall i2c_ali1535_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_ali15x3_init+0x0/0x1b @ 1
initcall i2c_ali15x3_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_amd8111_init+0x0/0x1b @ 1
initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_i801_init+0x0/0x1b @ 1
initcall i2c_i801_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_sch_init+0x0/0x1b @ 1
initcall i2c_sch_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_sis5595_init+0x0/0x1b @ 1
initcall i2c_sis5595_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_sis630_init+0x0/0x1b @ 1
initcall i2c_sis630_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_sis96x_init+0x0/0x1b @ 1
initcall i2c_sis96x_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_vt586b_init+0x0/0x1b @ 1
initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_vt596_init+0x0/0x1b @ 1
initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 usecs
calling  ocores_i2c_init+0x0/0x12 @ 1
initcall ocores_i2c_init+0x0/0x12 returned 0 after 0 usecs
calling  taos_init+0x0/0x1b @ 1
initcall taos_init+0x0/0x1b returned 0 after 0 usecs
calling  i2c_voodoo3_init+0x0/0x1b @ 1
initcall i2c_voodoo3_init+0x0/0x1b returned 0 after 3255 usecs
calling  i2c_pca_pf_init+0x0/0x12 @ 1
initcall i2c_pca_pf_init+0x0/0x12 returned 0 after 0 usecs
calling  ds1682_init+0x0/0x14 @ 1
initcall ds1682_init+0x0/0x14 returned 0 after 0 usecs
calling  pca9539_init+0x0/0x14 @ 1
initcall pca9539_init+0x0/0x14 returned 0 after 0 usecs
calling  pcf8574_init+0x0/0x14 @ 1
initcall pcf8574_init+0x0/0x14 returned 0 after 0 usecs
calling  pcf8575_init+0x0/0x14 @ 1
initcall pcf8575_init+0x0/0x14 returned 0 after 0 usecs
calling  w1_init+0x0/0xb0 @ 1
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0xb0 returned 0 after 0 usecs
calling  matrox_w1_init+0x0/0x1b @ 1
initcall matrox_w1_init+0x0/0x1b returned 0 after 0 usecs
calling  ds_init+0x0/0x50 @ 1
usbcore: registered new interface driver DS9490R
initcall ds_init+0x0/0x50 returned 0 after 0 usecs
calling  w1_therm_init+0x0/0x4d @ 1
initcall w1_therm_init+0x0/0x4d returned 0 after 0 usecs
calling  w1_smem_init+0x0/0x44 @ 1
initcall w1_smem_init+0x0/0x44 returned 0 after 0 usecs
calling  w1_ds2760_init+0x0/0x2c @ 1
1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x2c returned 0 after 0 usecs
calling  bq27x00_battery_init+0x0/0x36 @ 1
initcall bq27x00_battery_init+0x0/0x36 returned 0 after 0 usecs
calling  pcipcwd_init_module+0x0/0x35 @ 1
initcall pcipcwd_init_module+0x0/0x35 returned 0 after 0 usecs
calling  acq_init+0x0/0x66 @ 1
WDT driver for Acquire single board computer initialising.
acquirewdt: I/O address 0x0043 already in use
acquirewdt: probe of acquirewdt failed with error -5
initcall acq_init+0x0/0x66 returned 0 after 0 usecs
calling  advwdt_init+0x0/0x75 @ 1
WDT driver for Advantech single board computer initialising.
advantechwdt: initialized. timeout=60 sec (nowayout=1)
initcall advwdt_init+0x0/0x75 returned 0 after 3255 usecs
calling  watchdog_init+0x0/0x182 @ 1
initcall watchdog_init+0x0/0x182 returned -19 after 0 usecs
calling  alim7101_wdt_init+0x0/0x1d0 @ 1
alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
alim7101_wdt: ALi M7101 PMU not present - WDT not set
initcall alim7101_wdt_init+0x0/0x1d0 returned -16 after 0 usecs
initcall alim7101_wdt_init+0x0/0x1d0 returned with error code -16 
calling  sc520_wdt_init+0x0/0xec @ 1
sc520_wdt: cannot register miscdev on minor=130 (err=-16)
initcall sc520_wdt_init+0x0/0xec returned -16 after 843098 usecs
initcall sc520_wdt_init+0x0/0xec returned with error code -16 
calling  ibwdt_init+0x0/0x66 @ 1
ib700wdt: WDT driver for IB700 single board computer initialising.
ib700wdt: START method I/O 443 is not available.
ib700wdt: probe of ib700wdt failed with error -5
initcall ibwdt_init+0x0/0x66 returned 0 after 9765 usecs
calling  ibmasr_init+0x0/0x286 @ 1
initcall ibmasr_init+0x0/0x286 returned -19 after 0 usecs
calling  wafwdt_init+0x0/0x184 @ 1
WDT driver for Wafer 5823 single board computer initialising.
Wafer 5823 WDT: I/O address 0x0443 already in use
initcall wafwdt_init+0x0/0x184 returned -5 after 6510 usecs
initcall wafwdt_init+0x0/0x184 returned with error code -5 
calling  watchdog_init+0x0/0x6d @ 1
i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
initcall watchdog_init+0x0/0x6d returned 0 after 3255 usecs
calling  iTCO_wdt_init_module+0x0/0x6d @ 1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: No card detected
initcall iTCO_wdt_init_module+0x0/0x6d returned 0 after 6510 usecs
calling  iTCO_vendor_init_module+0x0/0x28 @ 1
iTCO_vendor_support: vendor-support=0
initcall iTCO_vendor_init_module+0x0/0x28 returned 0 after 3255 usecs
calling  it87_wdt_init+0x0/0x5ea @ 1
IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
initcall it87_wdt_init+0x0/0x5ea returned -19 after 3255 usecs
calling  sc1200wdt_init+0x0/0x11a @ 1
sc1200wdt: build 20020303
sc1200wdt: io parameter must be specified
initcall sc1200wdt_init+0x0/0x11a returned -22 after 6510 usecs
initcall sc1200wdt_init+0x0/0x11a returned with error code -22 
calling  sbc60xxwdt_init+0x0/0x19c @ 1
sbc60xxwdt: I/O address 0x0443 already in use
initcall sbc60xxwdt_init+0x0/0x19c returned -5 after 3255 usecs
initcall sbc60xxwdt_init+0x0/0x19c returned with error code -5 
calling  sbc8360_init+0x0/0x1c1 @ 1
sbc8360: failed to register misc device
initcall sbc8360_init+0x0/0x1c1 returned -16 after 3255 usecs
initcall sbc8360_init+0x0/0x1c1 returned with error code -16 
calling  cpu5wdt_init_module+0x0/0x157 @ 1
cpu5wdt: sorry, was my fault
cpu5wdt: misc_register failed
initcall cpu5wdt_init_module+0x0/0x157 returned -16 after 3255 usecs
initcall cpu5wdt_init_module+0x0/0x157 returned with error code -16 
calling  sch311x_wdt_init+0x0/0x177 @ 1
initcall sch311x_wdt_init+0x0/0x177 returned -19 after 0 usecs
calling  wb_smsc_wdt_init+0x0/0x1ce @ 1
SMsC 37B787 watchdog component driver 1.1 initialising...
smsc37b787_wdt: Unable to register miscdev on minor 130
initcall wb_smsc_wdt_init+0x0/0x1ce returned -16 after 6510 usecs
initcall wb_smsc_wdt_init+0x0/0x1ce returned with error code -16 
calling  wdt_init+0x0/0x204 @ 1
WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
initcall wdt_init+0x0/0x204 returned -16 after 9765 usecs
initcall wdt_init+0x0/0x204 returned with error code -16 
calling  w83877f_wdt_init+0x0/0x177 @ 1
w83877f_wdt: I/O address 0x0443 already in use
initcall w83877f_wdt_init+0x0/0x177 returned -5 after 3255 usecs
initcall w83877f_wdt_init+0x0/0x177 returned with error code -5 
calling  zf_init+0x0/0x188 @ 1
machzwd: MachZ ZF-Logic Watchdog driver initializing.
machzwd: no ZF-Logic found
initcall zf_init+0x0/0x188 returned -19 after 6510 usecs
calling  telephony_init+0x0/0x57 @ 1
Linux telephony interface: v1.00
initcall telephony_init+0x0/0x57 returned 0 after 0 usecs
calling  hci_uart_init+0x0/0xef @ 1
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
initcall hci_uart_init+0x0/0xef returned 0 after 13020 usecs
calling  bcm203x_init+0x0/0x59 @ 1
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
initcall bcm203x_init+0x0/0x59 returned 0 after 6510 usecs
calling  bfusb_init+0x0/0x68 @ 1
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
initcall bfusb_init+0x0/0x68 returned 0 after 6510 usecs
calling  isdn_init+0x0/0x35b @ 1
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
initcall isdn_init+0x0/0x35b returned 0 after 6510 usecs
calling  isdn_bsdcomp_init+0x0/0x35 @ 1
PPP BSD Compression module registered
initcall isdn_bsdcomp_init+0x0/0x35 returned 0 after 3255 usecs
calling  kcapi_init+0x0/0x92 @ 1
CAPI Subsystem Rev 1.1.2.8
initcall kcapi_init+0x0/0x92 returned 0 after 3255 usecs
calling  capidrv_init+0x0/0x180 @ 1
capidrv: Rev 1.1.2.2: loaded
initcall capidrv_init+0x0/0x180 returned 0 after 0 usecs
calling  divadidd_init+0x0/0x110 @ 1
Eicon DIVA - DIDD table (http://www.melware.net)
divadidd: Rel:2.0  Rev:1.13.6.4  Build:102-51(local)
initcall divadidd_init+0x0/0x110 returned 0 after 9765 usecs
calling  divas_init+0x0/0x180 @ 1
Eicon DIVA Server driver (http://www.melware.net)
divas: Rel:2.0  Rev:1.55.4.6  Build: 102-52(local)
divas: support for: BRI/PCI adapters
divas: started with major 245
initcall divas_init+0x0/0x180 returned 0 after 16276 usecs
calling  divasi_init+0x0/0x180 @ 1
Eicon DIVA - User IDI (http://www.melware.net)
diva_idi: Rel:2.0  Rev:1.25.6.2  Build: local
diva_idi: started with major 244
initcall divasi_init+0x0/0x180 returned 0 after 9765 usecs
calling  divert_init+0x0/0x6e @ 1
dss1_divert module successfully installed
initcall divert_init+0x0/0x6e returned 0 after 3255 usecs
calling  HiSax_init+0x0/0x3eb @ 1
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (kernel)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: S0Box IO driver Rev. 2.6.2.4
HiSax: S0Box ports 378-37f already in use
HiSax: Card S0Box not installed !
initcall HiSax_init+0x0/0x3eb returned -19 after 35807 usecs
calling  st5481_usb_init+0x0/0x5b @ 1
hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $
usbcore: registered new interface driver st5481_usb
initcall st5481_usb_init+0x0/0x5b returned 0 after 6510 usecs
calling  hfc4s8s_module_init+0x0/0x64 @ 1
HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10
HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de
HFC-4S/8S: found 0 cards
initcall hfc4s8s_module_init+0x0/0x64 returned 0 after 9765 usecs
calling  gigaset_init_module+0x0/0x29 @ 1
gigaset: Driver for Gigaset 307x
initcall gigaset_init_module+0x0/0x29 returned 0 after 3255 usecs
calling  usb_gigaset_init+0x0/0x97 @ 1
usbcore: registered new interface driver usb_gigaset
usb_gigaset: USB Driver for Gigaset 307x using M105
initcall usb_gigaset_init+0x0/0x97 returned 0 after 6510 usecs
calling  cpufreq_stats_init+0x0/0xed @ 1
initcall cpufreq_stats_init+0x0/0xed returned 0 after 0 usecs
calling  cpufreq_gov_powersave_init+0x0/0x12 @ 1
initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 usecs
calling  cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
calling  cpufreq_gov_dbs_init+0x0/0x6b @ 1
initcall cpufreq_gov_dbs_init+0x0/0x6b returned 0 after 0 usecs
calling  init_ladder+0x0/0x21 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x21 returned 0 after 3255 usecs
calling  i7300_idle_init+0x0/0x705 @ 1
initcall i7300_idle_init+0x0/0x705 returned -19 after 0 usecs
calling  sdio_uart_init+0x0/0x124 @ 1
initcall sdio_uart_init+0x0/0x124 returned 0 after 0 usecs
calling  wbsd_drv_init+0x0/0x96 @ 1
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
initcall wbsd_drv_init+0x0/0x96 returned 0 after 6510 usecs
calling  cb710_mmc_init_module+0x0/0x12 @ 1
initcall cb710_mmc_init_module+0x0/0x12 returned 0 after 0 usecs
calling  memstick_init+0x0/0x8a @ 1
initcall memstick_init+0x0/0x8a returned 0 after 0 usecs
calling  mspro_block_init+0x0/0x76 @ 1
initcall mspro_block_init+0x0/0x76 returned 0 after 0 usecs
calling  tifm_ms_init+0x0/0x12 @ 1
initcall tifm_ms_init+0x0/0x12 returned 0 after 0 usecs
calling  jmb38x_ms_init+0x0/0x22 @ 1
initcall jmb38x_ms_init+0x0/0x22 returned 0 after 0 usecs
calling  dcdrbu_init+0x0/0x149 @ 1
initcall dcdrbu_init+0x0/0x149 returned 0 after 0 usecs
calling  dcdbas_init+0x0/0x6e @ 1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
initcall dcdbas_init+0x0/0x6e returned 0 after 3255 usecs
calling  ibft_init+0x0/0x712 @ 1
No iBFT detected.
initcall ibft_init+0x0/0x712 returned 0 after 0 usecs
calling  padlock_init+0x0/0xcb @ 1
padlock: VIA PadLock not detected.
initcall padlock_init+0x0/0xcb returned -19 after 3255 usecs
calling  hifn_init+0x0/0x1f @ 1
HIFN supports only 32-bit addresses.
initcall hifn_init+0x0/0x1f returned -22 after 3255 usecs
initcall hifn_init+0x0/0x1f returned with error code -22 
calling  hid_init+0x0/0x4b @ 1
initcall hid_init+0x0/0x4b returned 0 after 0 usecs
calling  a4_init+0x0/0x20 @ 1
initcall a4_init+0x0/0x20 returned 0 after 0 usecs
calling  apple_init+0x0/0x50 @ 1
initcall apple_init+0x0/0x50 returned 0 after 0 usecs
calling  ch_init+0x0/0x20 @ 1
initcall ch_init+0x0/0x20 returned 0 after 0 usecs
calling  ch_init+0x0/0x20 @ 1
initcall ch_init+0x0/0x20 returned 0 after 0 usecs
calling  dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after 0 usecs
calling  ez_init+0x0/0x20 @ 1
initcall ez_init+0x0/0x20 returned 0 after 0 usecs
calling  kye_init+0x0/0x20 @ 1
initcall kye_init+0x0/0x20 returned 0 after 0 usecs
calling  lg_init+0x0/0x20 @ 1
initcall lg_init+0x0/0x20 returned 0 after 0 usecs
calling  ms_init+0x0/0x20 @ 1
initcall ms_init+0x0/0x20 returned 0 after 0 usecs
calling  ntrig_init+0x0/0x20 @ 1
initcall ntrig_init+0x0/0x20 returned 0 after 0 usecs
calling  pl_init+0x0/0x20 @ 1
initcall pl_init+0x0/0x20 returned 0 after 0 usecs
calling  pl_init+0x0/0x20 @ 1
initcall pl_init+0x0/0x20 returned 0 after 0 usecs
calling  samsung_init+0x0/0x20 @ 1
initcall samsung_init+0x0/0x20 returned 0 after 3255 usecs
calling  ga_init+0x0/0x1c @ 1
initcall ga_init+0x0/0x1c returned 0 after 0 usecs
calling  tm_init+0x0/0x20 @ 1
initcall tm_init+0x0/0x20 returned 0 after 0 usecs
calling  ts_init+0x0/0x20 @ 1
initcall ts_init+0x0/0x20 returned 0 after 0 usecs
calling  zp_init+0x0/0x20 @ 1
initcall zp_init+0x0/0x20 returned 0 after 0 usecs
calling  hid_init+0x0/0xd2 @ 1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0xd2 returned 0 after 6510 usecs
calling  usb_mouse_init+0x0/0x43 @ 1
usbcore: registered new interface driver usbmouse
usbmouse: v1.6:USB HID Boot Protocol mouse driver
initcall usb_mouse_init+0x0/0x43 returned 0 after 6510 usecs
calling  virtio_pci_init+0x0/0x5a @ 1
initcall virtio_pci_init+0x0/0x5a returned 0 after 0 usecs
calling  init+0x0/0x1c @ 1
initcall init+0x0/0x1c returned 0 after 0 usecs
calling  oprofile_init+0x0/0x56 @ 1
oprofile: using timer interrupt.
initcall oprofile_init+0x0/0x56 returned 0 after 3255 usecs
calling  flow_cache_init+0x0/0x20c @ 1
initcall flow_cache_init+0x0/0x20c returned 0 after 0 usecs
calling  llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 0 usecs
calling  snap_init+0x0/0x44 @ 1
initcall snap_init+0x0/0x44 returned 0 after 0 usecs
calling  blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
calling  police_init_module+0x0/0x12 @ 1
initcall police_init_module+0x0/0x12 returned 0 after 0 usecs
calling  gact_init_module+0x0/0x20 @ 1
GACT probability on
initcall gact_init_module+0x0/0x20 returned 0 after 3255 usecs
calling  mirred_init_module+0x0/0x20 @ 1
Mirror/redirect action on
initcall mirred_init_module+0x0/0x20 returned 0 after 0 usecs
calling  ipt_init_module+0x0/0x12 @ 1
initcall ipt_init_module+0x0/0x12 returned 0 after 0 usecs
calling  nat_init_module+0x0/0x12 @ 1
initcall nat_init_module+0x0/0x12 returned 0 after 0 usecs
calling  pedit_init_module+0x0/0x12 @ 1
initcall pedit_init_module+0x0/0x12 returned 0 after 0 usecs
calling  simp_init_module+0x0/0x34 @ 1
Simple TC action Loaded
initcall simp_init_module+0x0/0x34 returned 0 after 3255 usecs
calling  hfsc_init+0x0/0x12 @ 1
initcall hfsc_init+0x0/0x12 returned 0 after 0 usecs
calling  red_module_init+0x0/0x12 @ 1
initcall red_module_init+0x0/0x12 returned 0 after 0 usecs
calling  gred_module_init+0x0/0x12 @ 1
initcall gred_module_init+0x0/0x12 returned 0 after 0 usecs
calling  dsmark_module_init+0x0/0x12 @ 1
initcall dsmark_module_init+0x0/0x12 returned 0 after 0 usecs
calling  sfq_module_init+0x0/0x12 @ 1
initcall sfq_module_init+0x0/0x12 returned 0 after 0 usecs
input: PS/2 Generic Mouse as /class/input/input2
calling  tbf_module_init+0x0/0x1c @ 1
initcall tbf_module_init+0x0/0x1c returned 0 after 0 usecs
calling  teql_init+0x0/0xe2 @ 1
initcall teql_init+0x0/0xe2 returned 0 after 0 usecs
calling  prio_module_init+0x0/0x12 @ 1
initcall prio_module_init+0x0/0x12 returned 0 after 0 usecs
calling  atm_init+0x0/0x12 @ 1
initcall atm_init+0x0/0x12 returned 0 after 0 usecs
calling  netem_module_init+0x0/0x20 @ 1
netem: version 1.2
initcall netem_module_init+0x0/0x20 returned 0 after 0 usecs
calling  init_u32+0x0/0x4a @ 1
u32 classifier
    Performance counters on
    input device check on 
    Actions configured 
initcall init_u32+0x0/0x4a returned 0 after 6510 usecs
calling  init_route4+0x0/0x12 @ 1
initcall init_route4+0x0/0x12 returned 0 after 0 usecs
calling  init_fw+0x0/0x12 @ 1
initcall init_fw+0x0/0x12 returned 0 after 0 usecs
calling  init_tcindex+0x0/0x12 @ 1
initcall init_tcindex+0x0/0x12 returned 0 after 0 usecs
calling  init_rsvp+0x0/0x12 @ 1
initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs
calling  init_basic+0x0/0x12 @ 1
initcall init_basic+0x0/0x12 returned 0 after 0 usecs
calling  cls_flow_init+0x0/0x12 @ 1
initcall cls_flow_init+0x0/0x12 returned 0 after 0 usecs
calling  init_cgroup_cls+0x0/0x15 @ 1
initcall init_cgroup_cls+0x0/0x15 returned 0 after 0 usecs
calling  nfnetlink_init+0x0/0x6e @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x6e returned 0 after 3255 usecs
calling  nfnetlink_queue_init+0x0/0xaa @ 1
initcall nfnetlink_queue_init+0x0/0xaa returned 0 after 0 usecs
calling  nfnetlink_log_init+0x0/0xdc @ 1
initcall nfnetlink_log_init+0x0/0xdc returned 0 after 0 usecs
calling  nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 6510 usecs
calling  nf_ct_proto_gre_init+0x0/0x4b @ 1
initcall nf_ct_proto_gre_init+0x0/0x4b returned 0 after 0 usecs
calling  nf_conntrack_proto_udplite_init+0x0/0x46 @ 1
initcall nf_conntrack_proto_udplite_init+0x0/0x46 returned 0 after 0 usecs
calling  nf_conntrack_amanda_init+0x0/0xbf @ 1
initcall nf_conntrack_amanda_init+0x0/0xbf returned 0 after 0 usecs
calling  nf_conntrack_h323_init+0x0/0x110 @ 1
initcall nf_conntrack_h323_init+0x0/0x110 returned 0 after 0 usecs
calling  nf_conntrack_irc_init+0x0/0x1ab @ 1
initcall nf_conntrack_irc_init+0x0/0x1ab returned 0 after 0 usecs
calling  nf_conntrack_netbios_ns_init+0x0/0x1e @ 1
initcall nf_conntrack_netbios_ns_init+0x0/0x1e returned 0 after 0 usecs
calling  nf_conntrack_pptp_init+0x0/0x44 @ 1
initcall nf_conntrack_pptp_init+0x0/0x44 returned 0 after 0 usecs
calling  nf_conntrack_sip_init+0x0/0x1b2 @ 1
initcall nf_conntrack_sip_init+0x0/0x1b2 returned 0 after 0 usecs
calling  nf_conntrack_tftp_init+0x0/0x1ae @ 1
initcall nf_conntrack_tftp_init+0x0/0x1ae returned 0 after 0 usecs
calling  xt_init+0x0/0x1cf @ 1
initcall xt_init+0x0/0x1cf returned 0 after 0 usecs
calling  tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  connmark_tg_init+0x0/0x17 @ 1
initcall connmark_tg_init+0x0/0x17 returned 0 after 0 usecs
calling  connsecmark_tg_init+0x0/0x12 @ 1
initcall connsecmark_tg_init+0x0/0x12 returned 0 after 0 usecs
calling  hl_tg_init+0x0/0x17 @ 1
initcall hl_tg_init+0x0/0x17 returned 0 after 0 usecs
calling  mark_tg_init+0x0/0x17 @ 1
initcall mark_tg_init+0x0/0x17 returned 0 after 0 usecs
calling  nflog_tg_init+0x0/0x12 @ 1
initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs
calling  nfqueue_tg_init+0x0/0x28 @ 1
initcall nfqueue_tg_init+0x0/0x28 returned 0 after 0 usecs
calling  xt_rateest_tg_init+0x0/0x3d @ 1
initcall xt_rateest_tg_init+0x0/0x3d returned 0 after 0 usecs
calling  tcpmss_tg_init+0x0/0x17 @ 1
initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs
calling  tcpoptstrip_tg_init+0x0/0x17 @ 1
initcall tcpoptstrip_tg_init+0x0/0x17 returned 0 after 0 usecs
calling  xt_cluster_mt_init+0x0/0x12 @ 1
initcall xt_cluster_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  comment_mt_init+0x0/0x12 @ 1
initcall comment_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  esp_mt_init+0x0/0x17 @ 1
initcall esp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  helper_mt_init+0x0/0x12 @ 1
initcall helper_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  hl_mt_init+0x0/0x17 @ 1
initcall hl_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  iprange_mt_init+0x0/0x17 @ 1
initcall iprange_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  length_mt_init+0x0/0x17 @ 1
initcall length_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  limit_mt_init+0x0/0x12 @ 1
initcall limit_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  mac_mt_init+0x0/0x12 @ 1
initcall mac_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  multiport_mt_init+0x0/0x17 @ 1
initcall multiport_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  pkttype_mt_init+0x0/0x12 @ 1
initcall pkttype_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  policy_mt_init+0x0/0x17 @ 1
initcall policy_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  xt_rateest_mt_init+0x0/0x12 @ 1
initcall xt_rateest_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  realm_mt_init+0x0/0x12 @ 1
initcall realm_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  sctp_mt_init+0x0/0x17 @ 1
initcall sctp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  state_mt_init+0x0/0x17 @ 1
initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  statistic_mt_init+0x0/0x12 @ 1
initcall statistic_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  time_mt_init+0x0/0x90 @ 1
xt_time: kernel timezone is -0000
initcall time_mt_init+0x0/0x90 returned 0 after 3255 usecs
calling  sysctl_ipv4_init+0x0/0x53 @ 1
initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 0 usecs
calling  ipip_init+0x0/0x74 @ 1
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x74 returned 0 after 3255 usecs
calling  init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 0 usecs
calling  ah4_init+0x0/0x6f @ 1
initcall ah4_init+0x0/0x6f returned 0 after 0 usecs
calling  esp4_init+0x0/0x6f @ 1
initcall esp4_init+0x0/0x6f returned 0 after 0 usecs
calling  xfrm4_beet_init+0x0/0x17 @ 1
initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 usecs
calling  tunnel4_init+0x0/0x34 @ 1
initcall tunnel4_init+0x0/0x34 returned 0 after 0 usecs
calling  xfrm4_transport_init+0x0/0x1f @ 1
initcall xfrm4_transport_init+0x0/0x1f returned 0 after 0 usecs
calling  ipv4_netfilter_init+0x0/0x20 @ 1
initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
calling  ip_tables_init+0x0/0xae @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xae returned 0 after 3255 usecs
calling  iptable_filter_init+0x0/0x72 @ 1
initcall iptable_filter_init+0x0/0x72 returned 0 after 0 usecs
calling  iptable_mangle_init+0x0/0x49 @ 1
initcall iptable_mangle_init+0x0/0x49 returned 0 after 0 usecs
calling  iptable_security_init+0x0/0x49 @ 1
initcall iptable_security_init+0x0/0x49 returned 0 after 0 usecs
calling  ah_mt_init+0x0/0x12 @ 1
initcall ah_mt_init+0x0/0x12 returned 0 after 0 usecs
calling  ecn_tg_init+0x0/0x12 @ 1
initcall ecn_tg_init+0x0/0x12 returned 0 after 0 usecs
calling  log_tg_init+0x0/0x29 @ 1
initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs
calling  arp_tables_init+0x0/0x90 @ 1
arp_tables: (C) 2002 David S. Miller
initcall arp_tables_init+0x0/0x90 returned 0 after 3255 usecs
calling  arpt_mangle_init+0x0/0x12 @ 1
initcall arpt_mangle_init+0x0/0x12 returned 0 after 0 usecs
calling  arptable_filter_init+0x0/0x49 @ 1
initcall arptable_filter_init+0x0/0x49 returned 0 after 0 usecs
calling  ip_queue_init+0x0/0x142 @ 1
initcall ip_queue_init+0x0/0x142 returned 0 after 0 usecs
calling  bictcp_register+0x0/0x12 @ 1
TCP bic registered
initcall bictcp_register+0x0/0x12 returned 0 after 3255 usecs
calling  cubictcp_register+0x0/0x6f @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6f returned 0 after 0 usecs
calling  tcp_westwood_register+0x0/0x12 @ 1
TCP westwood registered
initcall tcp_westwood_register+0x0/0x12 returned 0 after 3255 usecs
calling  hstcp_register+0x0/0x12 @ 1
TCP highspeed registered
initcall hstcp_register+0x0/0x12 returned 0 after 3255 usecs
calling  hybla_register+0x0/0x12 @ 1
TCP hybla registered
initcall hybla_register+0x0/0x12 returned 0 after 0 usecs
calling  htcp_register+0x0/0x12 @ 1
TCP htcp registered
initcall htcp_register+0x0/0x12 returned 0 after 0 usecs
calling  tcp_vegas_register+0x0/0x14 @ 1
TCP vegas registered
initcall tcp_vegas_register+0x0/0x14 returned 0 after 0 usecs
calling  tcp_veno_register+0x0/0x14 @ 1
TCP veno registered
initcall tcp_veno_register+0x0/0x14 returned 0 after 3255 usecs
calling  tcp_scalable_register+0x0/0x12 @ 1
TCP scalable registered
initcall tcp_scalable_register+0x0/0x12 returned 0 after 0 usecs
calling  tcp_yeah_register+0x0/0x14 @ 1
TCP yeah registered
initcall tcp_yeah_register+0x0/0x14 returned 0 after 3255 usecs
calling  tcp_illinois_register+0x0/0x12 @ 1
TCP illinois registered
initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 usecs
calling  packet_init+0x0/0x4a @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x4a returned 0 after 3255 usecs
calling  ipsec_pfkey_init+0x0/0x87 @ 1
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x87 returned 0 after 3255 usecs
calling  br_init+0x0/0xc0 @ 1
Bridge firewalling registered
initcall br_init+0x0/0xc0 returned 0 after 3255 usecs
calling  edsa_init_module+0x0/0x14 @ 1
initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs
calling  mv88e6123_61_65_init+0x0/0x14 @ 1
initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs
calling  dsa_init_module+0x0/0x12 @ 1
initcall dsa_init_module+0x0/0x12 returned 0 after 0 usecs
calling  x25_init+0x0/0x6a @ 1
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x6a returned 0 after 6510 usecs
calling  can_init+0x0/0x125 @ 1
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0x125 returned 0 after 6510 usecs
calling  bcm_module_init+0x0/0x5e @ 1
can: broadcast manager protocol (rev 20090105 t)
initcall bcm_module_init+0x0/0x5e returned 0 after 3255 usecs
calling  l2cap_init+0x0/0xe4 @ 1
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
initcall l2cap_init+0x0/0xe4 returned 0 after 6510 usecs
calling  sco_init+0x0/0xea @ 1
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
initcall sco_init+0x0/0xea returned 0 after 6510 usecs
calling  bnep_init+0x0/0xb3 @ 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: multicast
initcall bnep_init+0x0/0xb3 returned 0 after 6510 usecs
calling  cmtp_init+0x0/0x35 @ 1
Bluetooth: CMTP (CAPI Emulation) ver 1.0
initcall cmtp_init+0x0/0x35 returned 0 after 3255 usecs
calling  init_sunrpc+0x0/0x72 @ 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
initcall init_sunrpc+0x0/0x72 returned 0 after 6510 usecs
calling  init_rpcsec_gss+0x0/0x52 @ 1
initcall init_rpcsec_gss+0x0/0x52 returned 0 after 0 usecs
calling  init_kerberos_module+0x0/0x34 @ 1
initcall init_kerberos_module+0x0/0x34 returned 0 after 0 usecs
calling  init_spkm3_module+0x0/0x34 @ 1
initcall init_spkm3_module+0x0/0x34 returned 0 after 0 usecs
calling  af_rxrpc_init+0x0/0x1b4 @ 1
NET: Registered protocol family 33
initcall af_rxrpc_init+0x0/0x1b4 returned 0 after 3255 usecs
calling  atm_clip_init+0x0/0xb6 @ 1
initcall atm_clip_init+0x0/0xb6 returned 0 after 0 usecs
calling  br2684_init+0x0/0x3f @ 1
initcall br2684_init+0x0/0x3f returned 0 after 0 usecs
calling  pppoatm_init+0x0/0x19 @ 1
initcall pppoatm_init+0x0/0x19 returned 0 after 0 usecs
calling  decnet_init+0x0/0x96 @ 1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 512 buckets, 36Kbytes
NET: Registered protocol family 12
initcall decnet_init+0x0/0x96 returned 0 after 9765 usecs
calling  dn_rtmsg_init+0x0/0x7f @ 1
initcall dn_rtmsg_init+0x0/0x7f returned 0 after 0 usecs
calling  phonet_init+0x0/0x7d @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x7d returned 0 after 3255 usecs
calling  pep_register+0x0/0x17 @ 1
initcall pep_register+0x0/0x17 returned 0 after 0 usecs
calling  vlan_proto_init+0x0/0xca @ 1
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
initcall vlan_proto_init+0x0/0xca returned 0 after 6510 usecs
calling  sctp_init+0x0/0x852 @ 1
SCTP: Hash tables configured (established 14563 bind 14563)
sctp_init_sock(sk: ffff88003c160000)
initcall sctp_init+0x0/0x852 returned 0 after 13020 usecs
calling  lib80211_init+0x0/0x20 @ 1
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
initcall lib80211_init+0x0/0x20 returned 0 after 6510 usecs
calling  lib80211_crypto_wep_init+0x0/0x12 @ 1
lib80211_crypt: registered algorithm 'WEP'
initcall lib80211_crypto_wep_init+0x0/0x12 returned 0 after 3255 usecs
calling  lib80211_crypto_ccmp_init+0x0/0x12 @ 1
lib80211_crypt: registered algorithm 'CCMP'
initcall lib80211_crypto_ccmp_init+0x0/0x12 returned 0 after 3255 usecs
calling  lib80211_crypto_tkip_init+0x0/0x12 @ 1
lib80211_crypt: registered algorithm 'TKIP'
initcall lib80211_crypto_tkip_init+0x0/0x12 returned 0 after 3255 usecs
calling  tipc_init+0x0/0xc2 @ 1
TIPC: Activated (version 1.6.4 compiled Jun 16 2009 12:02:48)
NET: Registered protocol family 30
TIPC: Started in single node mode
initcall tipc_init+0x0/0xc2 returned 0 after 9765 usecs
calling  ieee802154_nl_init+0x0/0x90 @ 1
initcall ieee802154_nl_init+0x0/0x90 returned 0 after 26041 usecs
calling  af_ieee802154_init+0x0/0x7a @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x7a returned 0 after 3255 usecs
calling  wimax_subsys_init+0x0/0x20c @ 1
initcall wimax_subsys_init+0x0/0x20c returned 0 after 13020 usecs
calling  cpufreq_p4_init+0x0/0x63 @ 1
initcall cpufreq_p4_init+0x0/0x63 returned -19 after 0 usecs
calling  update_mp_table+0x0/0x6d3 @ 1
initcall update_mp_table+0x0/0x6d3 returned 0 after 0 usecs
calling  lapic_insert_resource+0x0/0x42 @ 1
initcall lapic_insert_resource+0x0/0x42 returned 0 after 0 usecs
calling  ioapic_insert_resources+0x0/0x63 @ 1
initcall ioapic_insert_resources+0x0/0x63 returned 0 after 0 usecs
calling  io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling  check_early_ioremap_leak+0x0/0x6d @ 1
initcall check_early_ioremap_leak+0x0/0x6d returned 0 after 0 usecs
calling  pat_memtype_list_init+0x0/0x29 @ 1
initcall pat_memtype_list_init+0x0/0x29 returned 0 after 0 usecs
calling  init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
calling  disable_boot_consoles+0x0/0x3a @ 1
initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs
calling  pm_qos_power_init+0x0/0xe1 @ 1
initcall pm_qos_power_init+0x0/0xe1 returned 0 after 0 usecs
calling  taskstats_init+0x0/0x98 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x98 returned 0 after 3255 usecs
calling  clear_boot_tracer+0x0/0x2f @ 1
initcall clear_boot_tracer+0x0/0x2f returned 0 after 0 usecs
calling  fail_page_alloc_debugfs+0x0/0xe9 @ 1
initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 usecs
calling  max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling  afs_init+0x0/0x1e5 @ 1
kAFS: Red Hat AFS client v0.1 registering.
initcall afs_init+0x0/0x1e5 returned 0 after 6510 usecs
calling  fail_make_request_debugfs+0x0/0x19 @ 1
initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 3255 usecs
calling  fail_io_timeout_debugfs+0x0/0x1b @ 1
initcall fail_io_timeout_debugfs+0x0/0x1b returned 0 after 0 usecs
calling  random32_reseed+0x0/0xf0 @ 1
initcall random32_reseed+0x0/0xf0 returned 0 after 0 usecs
calling  pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 0 usecs
calling  pci_sysfs_init+0x0/0x55 @ 1
initcall pci_sysfs_init+0x0/0x55 returned 0 after 0 usecs
calling  regulator_init_complete+0x0/0x14b @ 1
initcall regulator_init_complete+0x0/0x14b returned 0 after 0 usecs
calling  seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 0 usecs
calling  hd_init+0x0/0x343 @ 1
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
initcall hd_init+0x0/0x343 returned -1 after 3255 usecs
initcall hd_init+0x0/0x343 returned with error code -1 
calling  scsi_complete_async_scans+0x0/0x180 @ 1
initcall scsi_complete_async_scans+0x0/0x180 returned 0 after 0 usecs
calling  tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
calling  ip_auto_config+0x0/0x10db @ 1
initcall ip_auto_config+0x0/0x10db returned 0 after 0 usecs
calling  initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 0 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
async_waiting @ 1
async_continuing @ 1 after 0 usec
debug: unmapping init memory ffffffff82500000..ffffffff82763000
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
Mount failed for selinuxfs on /selinux:  No such device
INIT: version 2.86 booting
		Welcome to Fedora 
		Press 'I' to enter interactive startup.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock  (localtime): Tue Jun 16 18:05:23 CEST 2009 [  OK  ]
Starting udev: /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory
/sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory
/sbin/start_udev: line 187: /proc/sys/kernel/hotplug: No such file or directory
scsi_id[2596]: scsi_id: unable to access parent device of '/bus/usb/drivers/st5481_usb'
eth1: link down
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:812 check_unmap+0x1c9/0x6b0()
Hardware name: System Product Name
forcedeth 0000:00:0a.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000003b13b7aa] [size=42 bytes] [mapped as single] [unmapped as page]
Pid: 3435, comm: arping Not tainted 2.6.30-tip #54077
Call Trace:
 <IRQ>  [<ffffffff81540019>] ? check_unmap+0x1c9/0x6b0
 [<ffffffff8105427b>] warn_slowpath_common+0x7b/0xd0
 [<ffffffff81054331>] warn_slowpath_fmt+0x41/0x50
 [<ffffffff81d429e2>] ? _spin_lock_irqsave+0x82/0xa0
 [<ffffffff8153ff14>] ? check_unmap+0xc4/0x6b0
 [<ffffffff81540019>] check_unmap+0x1c9/0x6b0
 [<ffffffff81080e4f>] ? __lock_acquire+0x14f/0xd20
 [<ffffffff81014b83>] ? sched_clock+0x13/0x30
 [<ffffffff81540721>] debug_dma_unmap_page+0x51/0x60
 [<ffffffff817f7533>] nv_tx_done_optimized+0x1b3/0x2e0
 [<ffffffff817fcbc2>] nv_napi_poll+0x72/0x690
 [<ffffffff81b45f6f>] net_rx_action+0x19f/0x2a0
 [<ffffffff81b45ee0>] ? net_rx_action+0x110/0x2a0
 [<ffffffff8105b932>] __do_softirq+0xd2/0x1c0
 [<ffffffff8100d60c>] call_softirq+0x1c/0x30
 [<ffffffff8100f855>] do_softirq+0x95/0xd0
 [<ffffffff8105ac7d>] irq_exit+0x5d/0x70
 [<ffffffff81d43588>] do_IRQ+0x78/0xf0
 [<ffffffff810c8cf9>] ? perf_swcounter_event+0x119/0x180
 [<ffffffff8100cdd3>] ret_from_intr+0x0/0x16
 <EOI>  [<ffffffff810833fb>] ? lock_release+0xbb/0x230
 [<ffffffff810c8d11>] ? perf_swcounter_event+0x131/0x180
 [<ffffffff810c8c84>] ? perf_swcounter_event+0xa4/0x180
 [<ffffffff8103105c>] ? do_page_fault+0xac/0x360
 [<ffffffff81d43135>] ? page_fault+0x25/0x30
---[ end trace d56a5dadc3150dbb ]---
Mapped at:
 [<ffffffff81540b25>] debug_dma_map_page+0x85/0x170
 [<ffffffff817f91b6>] nv_start_xmit_optimized+0x1f6/0x700
 [<ffffffff81b491ec>] dev_hard_start_xmit+0x2dc/0x3a0
 [<ffffffff81b605ae>] __qdisc_run+0x25e/0x2b0
 [<ffffffff81b49718>] dev_queue_xmit+0x328/0x500
IPv4 FIB: Using LC-trie version 0.408
[ifconfig:3516]: Creates X25 socket.
Pid: 3516, comm: ifconfig Tainted: G        W  2.6.30-tip #54077
Call Trace:
 [<ffffffff81c1a1ab>] x25_create+0x4b/0x1b0
 [<ffffffff81b37148>] __sock_create+0x118/0x220
 [<ffffffff81b370d4>] ? __sock_create+0xa4/0x220
 [<ffffffff81b372b2>] sock_create+0x32/0x40
 [<ffffffff81b3753c>] sys_socket+0x3c/0x80
 [<ffffffff8100c3d2>] system_call_fastpath+0x16/0x1b
[  OK  ]
Loading default keymap (us): [  OK  ]
Setting hostname mercury:  [  OK  ]
CPA self-test:
 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
Checking filesystems
 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
ok.
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda6 
/1: clean, 379384/7325696 files, 3515098/7325632 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5 
/home: recovering journal
/home: clean, 134060/6111232 files, 2480753/12209392 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  EXT3 FS on sda6, internal journal
[  OK  ]
Mounting local filesystems:  kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  Adding 3911816k swap on /dev/sda2.  Priority:-1 extents:1 across:3911816k 
[  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
FATAL: Could not load /lib/modules/2.6.30-tip/modules.dep: No such file or directory
Bringing up loopback interface:  [ifconfig:3798]: Creates X25 socket.
Pid: 3798, comm: ifconfig Tainted: G        W  2.6.30-tip #54077
Call Trace:
 [<ffffffff81c1a1ab>] x25_create+0x4b/0x1b0
 [<ffffffff81b37148>] __sock_create+0x118/0x220
 [<ffffffff81b370d4>] ? __sock_create+0xa4/0x220
 [<ffffffff81b372b2>] sock_create+0x32/0x40
 [<ffffffff81b3753c>] sys_socket+0x3c/0x80
 [<ffffffff8100c3d2>] system_call_fastpath+0x16/0x1b
[  OK  ]
Bringing up interface eth0:  [ifconfig:3889]: Creates X25 socket.
Pid: 3889, comm: ifconfig Tainted: G        W  2.6.30-tip #54077
Call Trace:
 [<ffffffff81c1a1ab>] x25_create+0x4b/0x1b0
 [<ffffffff81b37148>] __sock_create+0x118/0x220
 [<ffffffff81b370d4>] ? __sock_create+0xa4/0x220
 [<ffffffff81b372b2>] sock_create+0x32/0x40
 [<ffffffff81b3753c>] sys_socket+0x3c/0x80
 [<ffffffff8100c3d2>] system_call_fastpath+0x16/0x1b
[  OK  ]
FATAL: Could not load /lib/modules/2.6.30-tip/modules.dep: No such file or directory
Starting system message bus: warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
[  OK  ]
Starting sshd: [  OK  ]
Starting postgresql service: 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
David Miller - June 16, 2009, 10:35 a.m.
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 16 Jun 2009 12:11:32 +0200

> sure, here you go (i also added a stack dump, just in case it's some 
> kernel-internal socket open):
> 
>  [ifconfig:3516]: Creates X25 socket.
> 
> so plain ifconfig. Part of the ~1.5 years old net-tools-1.60-84.fc8.

Ok, ifconfig seems to open one of every socket type when it starts up.
That explains why an X25 socket is openned and then closed.

Now the question is why is the X25 socket released by a timer?  This
should only happen if some socket memory is still pending in the
socket buffers.

Wait, I know why this is triggering now.  It's Eric Dumazet's SKB
accounting optimizations.

So, I'll fix the X25 timer bug.  It's always been there, but
beforehand this deferred-via-timer x25 socket destruction path almost
never triggers.  So we never saw it.  Now it happens every time.

Eric can you sniff around and see what you think about this unforseen
(at least for me) consequence of your changes?  Socket layers that use
the current sk_wmem_alloc/sk_rmem_alloc value at destroy time to
determine if a socket can be killed immediately, or need to be killed
later via timer, will always see that dummy one byte allocation you
now put there.

Can you look into that?

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eric Dumazet - June 16, 2009, 1:38 p.m.
David Miller a écrit :
> From: Ingo Molnar <mingo@elte.hu>
> Date: Tue, 16 Jun 2009 12:11:32 +0200
> 
>> sure, here you go (i also added a stack dump, just in case it's some 
>> kernel-internal socket open):
>>
>>  [ifconfig:3516]: Creates X25 socket.
>>
>> so plain ifconfig. Part of the ~1.5 years old net-tools-1.60-84.fc8.
> 
> Ok, ifconfig seems to open one of every socket type when it starts up.
> That explains why an X25 socket is openned and then closed.
> 
> Now the question is why is the X25 socket released by a timer?  This
> should only happen if some socket memory is still pending in the
> socket buffers.
> 
> Wait, I know why this is triggering now.  It's Eric Dumazet's SKB
> accounting optimizations.
> 
> So, I'll fix the X25 timer bug.  It's always been there, but
> beforehand this deferred-via-timer x25 socket destruction path almost
> never triggers.  So we never saw it.  Now it happens every time.
> 
> Eric can you sniff around and see what you think about this unforseen
> (at least for me) consequence of your changes?  Socket layers that use
> the current sk_wmem_alloc/sk_rmem_alloc value at destroy time to
> determine if a socket can be killed immediately, or need to be killed
> later via timer, will always see that dummy one byte allocation you
> now put there.
> 
> Can you look into that?
> 
> Thanks.


Sure I can look if a layer uses sk_wmem_alloc as you describe.

(I take you refer to commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 :
net: No more expensive sock_hold()/sock_put() on each tx)

So there is no impact for sk_rmem_alloc AFAIK

Thanks
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index ed80af8..5214a38 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -494,6 +494,10 @@  static int x25_create(struct net *net, struct socket *sock, int protocol)
 	struct x25_sock *x25;
 	int rc = -ESOCKTNOSUPPORT;
 
+#if 1
+	printk(KERN_INFO "[%s:%d]: Creates X25 socket.\n",
+	       current->comm, current->pid);
+#endif
 	if (net != &init_net)
 		return -EAFNOSUPPORT;