diff mbox

[U-Boot] serial: zynq: Remove unused #defines

Message ID 8f583fe620e6a1606568f05a5d31486bb50e4caf.1383144568.git.michal.simek@xilinx.com
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Commit Message

Michal Simek Oct. 30, 2013, 2:49 p.m. UTC 
From: Soren Brinkmann <soren.brinkmann@xilinx.com>

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 drivers/serial/serial_zynq.c | 4 ----
 1 file changed, 4 deletions(-)

--
1.8.2.3

Comments

Michal Simek Nov. 6, 2013, 8:20 a.m. UTC | #1 
Hi Tom,

On 10/30/2013 03:49 PM, Michal Simek wrote:
> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>  drivers/serial/serial_zynq.c | 4 ----
>  1 file changed, 4 deletions(-)

Can you please add this patch to your tree?

If you like, I can send you pull request but this is just
single patch which could go through directly.

Thanks,
Michal
Albert ARIBAUD Dec. 10, 2013, 12:06 p.m. UTC | #2 
Hi Michal,

On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
<michal.simek@xilinx.com> wrote:

> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>  drivers/serial/serial_zynq.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> index 050b9c0..ff28f3c 100644
> --- a/drivers/serial/serial_zynq.c
> +++ b/drivers/serial/serial_zynq.c
> @@ -21,10 +21,6 @@
> 
>  #define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
> 
> -/* Some clock/baud constants */
> -#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
> -#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */
> -
>  struct uart_zynq {
>  	u32 control; /* Control Register [8:0] */
>  	u32 mode; /* Mode Register [10:0] */
> --
> 1.8.2.3
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
Michal Simek Dec. 10, 2013, 12:11 p.m. UTC | #3 
On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
> Hi Michal,
> 
> On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
> <michal.simek@xilinx.com> wrote:
> 
>> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>  drivers/serial/serial_zynq.c | 4 ----
>>  1 file changed, 4 deletions(-)
>>
>> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
>> index 050b9c0..ff28f3c 100644
>> --- a/drivers/serial/serial_zynq.c
>> +++ b/drivers/serial/serial_zynq.c
>> @@ -21,10 +21,6 @@
>>
>>  #define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
>>
>> -/* Some clock/baud constants */
>> -#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
>> -#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */
>> -
>>  struct uart_zynq {
>>  	u32 control; /* Control Register [8:0] */
>>  	u32 mode; /* Mode Register [10:0] */
>> --
>> 1.8.2.3
>>
> 
> Applied to u-boot-arm/master, thanks!

This has been already applied to Tom's tree.

Thanks,
Michal
Albert ARIBAUD Dec. 10, 2013, 12:21 p.m. UTC | #4 
Hi Michal,

On Tue, 10 Dec 2013 13:11:47 +0100, Michal Simek <monstr@monstr.eu>
wrote:

> On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
> > Hi Michal,
> > 
> > On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
> > <michal.simek@xilinx.com> wrote:
> > 
> >> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >>
> >> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> >> ---
> >>  drivers/serial/serial_zynq.c | 4 ----
> >>  1 file changed, 4 deletions(-)
> >>
> >> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> >> index 050b9c0..ff28f3c 100644
> >> --- a/drivers/serial/serial_zynq.c
> >> +++ b/drivers/serial/serial_zynq.c
> >> @@ -21,10 +21,6 @@
> >>
> >>  #define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
> >>
> >> -/* Some clock/baud constants */
> >> -#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
> >> -#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */
> >> -
> >>  struct uart_zynq {
> >>  	u32 control; /* Control Register [8:0] */
> >>  	u32 mode; /* Mode Register [10:0] */
> >> --
> >> 1.8.2.3
> >>
> > 
> > Applied to u-boot-arm/master, thanks!
> 
> This has been already applied to Tom's tree.

Well then, it was in my patchwork todo in error. :)

But never mind: it'll merge just fine, that's what git is for.

> Thanks,
> Michal

Amicalement,
diff mbox

Patch

diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 050b9c0..ff28f3c 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -21,10 +21,6 @@ 

 #define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */

-/* Some clock/baud constants */
-#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
-#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */
-
 struct uart_zynq {
 	u32 control; /* Control Register [8:0] */
 	u32 mode; /* Mode Register [10:0] */