diff mbox

[13/24] ide: move retry constants out of BM_STATUS_* namespace

Message ID 1382978620-16641-14-git-send-email-pbonzini@redhat.com
State New
Headers show

Commit Message

Paolo Bonzini Oct. 28, 2013, 4:43 p.m. UTC
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/ide/core.c     | 20 ++++++++++----------
 hw/ide/internal.h | 12 ++++++------
 hw/ide/pci.c      | 14 +++++++-------
 3 files changed, 23 insertions(+), 23 deletions(-)

Comments

Kevin Wolf Oct. 30, 2013, 12:55 p.m. UTC | #1
Am 28.10.2013 um 17:43 hat Paolo Bonzini geschrieben:
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>  hw/ide/core.c     | 20 ++++++++++----------
>  hw/ide/internal.h | 12 ++++++------
>  hw/ide/pci.c      | 14 +++++++-------
>  3 files changed, 23 insertions(+), 23 deletions(-)

> --- a/hw/ide/internal.h
> +++ b/hw/ide/internal.h
> @@ -485,12 +485,12 @@ struct IDEDevice {
>      uint64_t wwn;
>  };
>  
> -/* FIXME These are not status register bits */
> -#define BM_STATUS_DMA_RETRY  0x08
> -#define BM_STATUS_PIO_RETRY  0x10
> -#define BM_STATUS_RETRY_READ  0x20
> -#define BM_STATUS_RETRY_FLUSH 0x40
> -#define BM_STATUS_RETRY_TRIM 0x80
> +/* These are used for the error_status field of IDEBus */
> +#define IDE_RETRY_DMA  0x08
> +#define IDE_RETRY_PIO  0x10
> +#define IDE_RETRY_READ  0x20
> +#define IDE_RETRY_FLUSH 0x40
> +#define IDE_RETRY_TRIM 0x80

I wouldn't mind using the chance to align the numbers on the same
column (or at least removing one space where there are two)

Kevin
diff mbox

Patch

diff --git a/hw/ide/core.c b/hw/ide/core.c
index a62654f..1e3108c 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -511,8 +511,8 @@  static void ide_sector_read_cb(void *opaque, int ret)
 
     bdrv_acct_done(s->bs, &s->acct);
     if (ret != 0) {
-        if (ide_handle_rw_error(s, -ret, BM_STATUS_PIO_RETRY |
-                                BM_STATUS_RETRY_READ)) {
+        if (ide_handle_rw_error(s, -ret, IDE_RETRY_PIO |
+                                IDE_RETRY_READ)) {
             return;
         }
     }
@@ -597,14 +597,14 @@  void ide_dma_error(IDEState *s)
 
 static int ide_handle_rw_error(IDEState *s, int error, int op)
 {
-    bool is_read = (op & BM_STATUS_RETRY_READ) != 0;
+    bool is_read = (op & IDE_RETRY_READ) != 0;
     BlockErrorAction action = bdrv_get_error_action(s->bs, is_read, error);
 
     if (action == BDRV_ACTION_STOP) {
         s->bus->dma->ops->set_unit(s->bus->dma, s->unit);
         s->bus->error_status = op;
     } else if (action == BDRV_ACTION_REPORT) {
-        if (op & BM_STATUS_DMA_RETRY) {
+        if (op & IDE_RETRY_DMA) {
             dma_buf_commit(s);
             ide_dma_error(s);
         } else {
@@ -623,12 +623,12 @@  void ide_dma_cb(void *opaque, int ret)
     bool stay_active = false;
 
     if (ret < 0) {
-        int op = BM_STATUS_DMA_RETRY;
+        int op = IDE_RETRY_DMA;
 
         if (s->dma_cmd == IDE_DMA_READ)
-            op |= BM_STATUS_RETRY_READ;
+            op |= IDE_RETRY_READ;
         else if (s->dma_cmd == IDE_DMA_TRIM)
-            op |= BM_STATUS_RETRY_TRIM;
+            op |= IDE_RETRY_TRIM;
 
         if (ide_handle_rw_error(s, -ret, op)) {
             return;
@@ -746,7 +746,7 @@  static void ide_sector_write_cb(void *opaque, int ret)
     s->status &= ~BUSY_STAT;
 
     if (ret != 0) {
-        if (ide_handle_rw_error(s, -ret, BM_STATUS_PIO_RETRY)) {
+        if (ide_handle_rw_error(s, -ret, IDE_RETRY_PIO)) {
             return;
         }
     }
@@ -813,7 +813,7 @@  static void ide_flush_cb(void *opaque, int ret)
 
     if (ret < 0) {
         /* XXX: What sector number to set here? */
-        if (ide_handle_rw_error(s, -ret, BM_STATUS_RETRY_FLUSH)) {
+        if (ide_handle_rw_error(s, -ret, IDE_RETRY_FLUSH)) {
             return;
         }
     }
@@ -2356,7 +2356,7 @@  static bool ide_drive_pio_state_needed(void *opaque)
     IDEState *s = opaque;
 
     return ((s->status & DRQ_STAT) != 0)
-        || (s->bus->error_status & BM_STATUS_PIO_RETRY);
+        || (s->bus->error_status & IDE_RETRY_PIO);
 }
 
 static bool ide_tray_state_needed(void *opaque)
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index f2d8ccc..041f173 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -485,12 +485,12 @@  struct IDEDevice {
     uint64_t wwn;
 };
 
-/* FIXME These are not status register bits */
-#define BM_STATUS_DMA_RETRY  0x08
-#define BM_STATUS_PIO_RETRY  0x10
-#define BM_STATUS_RETRY_READ  0x20
-#define BM_STATUS_RETRY_FLUSH 0x40
-#define BM_STATUS_RETRY_TRIM 0x80
+/* These are used for the error_status field of IDEBus */
+#define IDE_RETRY_DMA  0x08
+#define IDE_RETRY_PIO  0x10
+#define IDE_RETRY_READ  0x20
+#define IDE_RETRY_FLUSH 0x40
+#define IDE_RETRY_TRIM 0x80
 
 static inline IDEState *idebus_active_if(IDEBus *bus)
 {
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index e61a82f..cc910de 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -34,8 +34,8 @@ 
 #define BMDMA_PAGE_SIZE 4096
 
 #define BM_MIGRATION_COMPAT_STATUS_BITS \
-        (BM_STATUS_DMA_RETRY | BM_STATUS_PIO_RETRY | \
-        BM_STATUS_RETRY_READ | BM_STATUS_RETRY_FLUSH)
+        (IDE_RETRY_DMA | IDE_RETRY_PIO | \
+        IDE_RETRY_READ | IDE_RETRY_FLUSH)
 
 static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
                             BlockDriverCompletionFunc *dma_cb)
@@ -204,7 +204,7 @@  static void bmdma_restart_bh(void *opaque)
         return;
     }
 
-    is_read = (bus->error_status & BM_STATUS_RETRY_READ) != 0;
+    is_read = (bus->error_status & IDE_RETRY_READ) != 0;
 
     /* The error status must be cleared before resubmitting the request: The
      * request may fail again, and this case can only be distinguished if the
@@ -212,19 +212,19 @@  static void bmdma_restart_bh(void *opaque)
     error_status = bus->error_status;
     bus->error_status = 0;
 
-    if (error_status & BM_STATUS_DMA_RETRY) {
-        if (error_status & BM_STATUS_RETRY_TRIM) {
+    if (error_status & IDE_RETRY_DMA) {
+        if (error_status & IDE_RETRY_TRIM) {
             bmdma_restart_dma(bm, IDE_DMA_TRIM);
         } else {
             bmdma_restart_dma(bm, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
         }
-    } else if (error_status & BM_STATUS_PIO_RETRY) {
+    } else if (error_status & IDE_RETRY_PIO) {
         if (is_read) {
             ide_sector_read(bmdma_active_if(bm));
         } else {
             ide_sector_write(bmdma_active_if(bm));
         }
-    } else if (error_status & BM_STATUS_RETRY_FLUSH) {
+    } else if (error_status & IDE_RETRY_FLUSH) {
         ide_flush_cache(bmdma_active_if(bm));
     }
 }