diff mbox

[net-next,08/11] ixgbe: fix rx-usecs range checks for BQL

Message ID 1382628458-26601-9-git-send-email-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T Oct. 24, 2013, 3:27 p.m. UTC 
From: Emil Tantilov <emil.s.tantilov@intel.com>

This patch resolves an issue where the logic used to detect changes in rx-usecs
was incorrect and was masked by the call to ixgbe_update_rsc().

Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow
ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in
order to avoid Tx hangs with BQL enabled.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 90aac31..4e7c9b0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2257,13 +2257,13 @@  static int ixgbe_set_coalesce(struct net_device *netdev,
 
 #if IS_ENABLED(CONFIG_BQL)
 	/* detect ITR changes that require update of TXDCTL.WTHRESH */
-	if ((adapter->tx_itr_setting > 1) &&
+	if ((adapter->tx_itr_setting != 1) &&
 	    (adapter->tx_itr_setting < IXGBE_100K_ITR)) {
 		if ((tx_itr_prev == 1) ||
-		    (tx_itr_prev > IXGBE_100K_ITR))
+		    (tx_itr_prev >= IXGBE_100K_ITR))
 			need_reset = true;
 	} else {
-		if ((tx_itr_prev > 1) &&
+		if ((tx_itr_prev != 1) &&
 		    (tx_itr_prev < IXGBE_100K_ITR))
 			need_reset = true;
 	}