@@ -399,7 +399,7 @@ int __i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri flags)
struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
struct net_device *net_dev = wimax_dev->net_dev;
struct device *dev = i2400m_dev(i2400m);
- int times = 3;
+ int times = i2400m->bus_bm_retries;
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
retry:
@@ -980,7 +980,7 @@ int i2400m_fw_dnload(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf,
{
int ret = 0;
struct device *dev = i2400m_dev(i2400m);
- int count = I2400M_BOOT_RETRIES;
+ int count = i2400m->bus_bm_retries;
d_fnstart(5, dev, "(i2400m %p bcf %p size %zu)\n",
i2400m, bcf, bcf_size);
@@ -150,6 +150,7 @@
enum {
/* Firmware uploading */
I2400M_BOOT_RETRIES = 3,
+ I3200_BOOT_RETRIES = 3,
/* Size of the Boot Mode Command buffer */
I2400M_BM_CMD_BUF_SIZE = 16 * 1024,
I2400M_BM_ACK_BUF_SIZE = 256,
@@ -224,6 +225,17 @@ struct i2400m_roq;
* process, so it cannot rely on common infrastructure being laid
* out.
*
+ * @bus_bm_retries: [fill] How many times shall a firmware upload /
+ * device initialization be retried? Different models of the same
+ * device might need different values, hence it is set by the
+ * bus-specific driver. Note this value is used in two places,
+ * i2400m_fw_dnload() and __i2400m_dev_start(); they won't become
+ * multiplicative (__i2400m_dev_start() calling N times
+ * i2400m_fw_dnload() and this trying N times to download the
+ * firmware), as if __i2400m_dev_start() only retries if the
+ * firmware crashed while initializing the device (not in a
+ * general case).
+ *
* @bus_bm_cmd_send: [fill] Function called to send a boot-mode
* command. Flags are defined in 'enum i2400m_bm_cmd_flags'. This
* is synchronous and has to return 0 if ok or < 0 errno code in
@@ -399,6 +411,8 @@ struct i2400m {
size_t bus_tx_block_size;
size_t bus_pl_size_max;
+ unsigned bus_bm_retries;
+
int (*bus_dev_start)(struct i2400m *);
void (*bus_dev_stop)(struct i2400m *);
void (*bus_tx_kick)(struct i2400m *);
@@ -418,6 +418,9 @@ int i2400ms_probe(struct sdio_func *func,
i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
i2400m->bus_reset = i2400ms_bus_reset;
+ /* The iwmc3200-wimax sometimes requires the driver to try
+ * hard when we paint it into a corner. */
+ i2400m->bus_bm_retries = I3200_BOOT_RETRIES;
i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
i2400m->bus_fw_names = i2400ms_bus_fw_names;
@@ -399,6 +399,7 @@ int i2400mu_probe(struct usb_interface *iface,
i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
i2400m->bus_reset = i2400mu_bus_reset;
+ i2400m->bus_bm_retries = I2400M_BOOT_RETRIES;
i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
i2400m->bus_fw_names = i2400mu_bus_fw_names;
The code that sets up the i2400m (firmware load and general driver setup after it) includes a couple of retry loops. The SDIO device sometimes can get in more complicated corners than the USB one (due to its interaction with other SDIO functions), that require trying a few more times. To solve that, without having a failing USB device taking longer to be considered dead, allow the retry counts to be specified by the bus-specific driver, which the general driver takes as a parameter. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> --- drivers/net/wimax/i2400m/driver.c | 2 +- drivers/net/wimax/i2400m/fw.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 14 ++++++++++++++ drivers/net/wimax/i2400m/sdio.c | 3 +++ drivers/net/wimax/i2400m/usb.c | 1 + 5 files changed, 20 insertions(+), 2 deletions(-)