Patchwork [PATCHv4,2/2] ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.

login
register
mail settings
Submitter Denis Carikli
Date Oct. 23, 2013, 9:09 a.m.
Message ID <1382519393-17055-2-git-send-email-denis@eukrea.com>
Download mbox | patch
Permalink /patch/285575/
State New
Headers show

Comments

Denis Carikli - Oct. 23, 2013, 9:09 a.m.
The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog
 * SD.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi       |   63 ++++++++++
 .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |  132 ++++++++++++++++++++
 2 files changed, 195 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
Shawn Guo - Oct. 24, 2013, 7:01 a.m.
On Wed, Oct 23, 2013 at 11:09:53AM +0200, Denis Carikli wrote:
> The following devices/functionalities were added:
>  * Main and secondary UARTs.
>  * i2c and the pcf8563 device.
>  * Ethernet.
>  * NAND.
>  * The BP1 button.
>  * The LED.
>  * Watchdog
>  * SD.
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
>  arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi       |   63 ++++++++++
>  .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |  132 ++++++++++++++++++++
>  2 files changed, 195 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
>  create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts

Applied both patches, after adding imx51-eukrea-mbimxsd51-baseboard.dtb
target into arch/arm/boot/dts/Makefile.

Shawn

Patch

diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 0000000..8638656
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,63 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	tsc2007 {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 0000000..64d8082
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,132 @@ 
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 1>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1 &pinctrl_esdhc1_cd>;
+	fsl,cd-controller;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	backlight {
+		pinctrl_backlight_1: backlightgrp-1 {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+			>;
+		};
+	};
+
+	esdhc1 {
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <
+				MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+			>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+			>;
+		};
+	};
+
+	leds {
+		pinctrl_gpioled: gpioledgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+			>;
+		};
+	};
+
+	reg_lcd_3v3 {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <
+				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+			>;
+		};
+	};
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2 &pinctrl_uart3_rtscts_2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};