diff mbox

[U-Boot,1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin

Message ID 1382398500-9649-2-git-send-email-otavio@ossystems.com.br
State Accepted
Delegated to: Stefano Babic
Headers show

Commit Message

Otavio Salvador Oct. 21, 2013, 11:34 p.m. UTC 
This removes the PAD_CTL_DSE_120ohm as done for i.MX6Q's IPU1_DI0_PIN4
pin definition and makes it aligned with 3.0.35-4.1.0 and 3.12
mainline kernel.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Stefano Babic Oct. 31, 2013, 5:01 p.m. UTC | #1 
On 22/10/2013 01:34, Otavio Salvador wrote:
> This removes the PAD_CTL_DSE_120ohm as done for i.MX6Q's IPU1_DI0_PIN4
> pin definition and makes it aligned with 3.0.35-4.1.0 and 3.12
> mainline kernel.
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index b5df68a..7373407 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -210,7 +210,7 @@  enum {
 	MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3	= IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__PL301_SIM_MX6DL_PER1_HADDR_10	= IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN3__LCDIF_CS		= IOMUX_PAD(0x03BC, 0x00A8, 8, 0x0000, 0, 0),
-	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+	MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4		= IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__LCDIF_BUSY		= IOMUX_PAD(0x03C0, 0x00AC, 1, 0x08D8, 1, 0),
 	MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	= IOMUX_PAD(0x03C0, 0x00AC, 2, 0x0000, 0, 0),
 	MX6_PAD_DI0_PIN4__USDHC1_WP		= IOMUX_PAD(0x03C0, 0x00AC, 3, 0x092C, 0, 0),