@@ -2110,7 +2110,6 @@ static void de_remove_one(struct pci_dev *pdev)
iounmap(de->regs);
pci_release_regions(pdev);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}
@@ -523,7 +523,6 @@ err_out_res:
err_out_disable:
pci_disable_device(pdev);
err_out_free:
- pci_set_drvdata(pdev, NULL);
free_netdev(dev);
return err;
@@ -548,8 +547,6 @@ static void dmfe_remove_one(struct pci_dev *pdev)
db->buf_pool_ptr, db->buf_pool_dma_ptr);
pci_release_regions(pdev);
free_netdev(dev); /* free board information */
-
- pci_set_drvdata(pdev, NULL);
}
DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
@@ -1939,7 +1939,6 @@ static void tulip_remove_one(struct pci_dev *pdev)
pci_iounmap(pdev, tp->base_addr);
free_netdev (dev);
pci_release_regions (pdev);
- pci_set_drvdata (pdev, NULL);
/* pci_power_off (pdev, -1); */
}
@@ -429,7 +429,6 @@ err_out_release:
err_out_disable:
pci_disable_device(pdev);
err_out_free:
- pci_set_drvdata(pdev, NULL);
free_netdev(dev);
return err;
@@ -450,7 +449,6 @@ static void uli526x_remove_one(struct pci_dev *pdev)
db->buf_pool_ptr, db->buf_pool_dma_ptr);
pci_release_regions(pdev);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}
@@ -468,7 +468,6 @@ static int w840_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_out_cleardev:
- pci_set_drvdata(pdev, NULL);
pci_iounmap(pdev, ioaddr);
err_out_free_res:
pci_release_regions(pdev);
@@ -1542,8 +1541,6 @@ static void w840_remove1(struct pci_dev *pdev)
pci_iounmap(pdev, np->base_addr);
free_netdev(dev);
}
-
- pci_set_drvdata(pdev, NULL);
}
#ifdef CONFIG_PM
@@ -289,7 +289,6 @@ out:
err_unmap:
pci_iounmap(pdev, private->ioaddr);
reg_fail:
- pci_set_drvdata(pdev, NULL);
dma_free_coherent(d, 8192, private->tx_buffer, private->tx_dma_handle);
tx_buf_fail:
dma_free_coherent(d, 8192, private->rx_buffer, private->rx_dma_handle);
@@ -317,7 +316,6 @@ static void xircom_remove(struct pci_dev *pdev)
unregister_netdev(dev);
pci_iounmap(pdev, card->ioaddr);
- pci_set_drvdata(pdev, NULL);
dma_free_coherent(d, 8192, card->tx_buffer, card->tx_dma_handle);
dma_free_coherent(d, 8192, card->rx_buffer, card->rx_dma_handle);
free_netdev(dev);
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> --- drivers/net/ethernet/dec/tulip/de2104x.c | 1 - drivers/net/ethernet/dec/tulip/dmfe.c | 3 --- drivers/net/ethernet/dec/tulip/tulip_core.c | 1 - drivers/net/ethernet/dec/tulip/uli526x.c | 2 -- drivers/net/ethernet/dec/tulip/winbond-840.c | 3 --- drivers/net/ethernet/dec/tulip/xircom_cb.c | 2 -- 6 files changed, 12 deletions(-)