Message ID | CABMQnVK+AEVuy94DoQPGRVHW2sNre4mHdhQOuyfGO_gF3dSLPQ@mail.gmail.com |
---|---|
State | Accepted |
Delegated to: | Tom Rini |
Headers | show |
On Thu, Oct 17, 2013 at 09:51:05AM +0900, Nobuhiro Iwamatsu wrote: > Hi Tom, > > Please pull u-boot-sh master branch. > > Best regards, > Nobuhiro > The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586: > > Prepare v2013.10 (2013-10-16 13:08:12 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-sh.git master > > for you to fetch changes up to 7f2013d47c8c62c2373cafe68d6ba4649099e49a: > > serial: sh: Add support R8A7791 (2013-10-17 09:43:36 +0900) > > ---------------------------------------------------------------- > Nobuhiro Iwamatsu (8): > sh: timer: Mask bit of timer prescaler > sh: timer: Remove static global variable > sh: cache: Change cache API to defines as U-Boot > sh: timer: Change definition of clock of TMU > serial: sh: Change definition of clock of SCIF > sh: boards: Change clock definition of SCIF and TMU > serial: sh: Add support R8A7790 > serial: sh: Add support R8A7791 OK, this breaks the two ARM boards that also use the serial_sh.c driver: serial_sh.c:53:2: error: 'CONFIG_SH_SCIF_CLK_FREQ' undeclared (first use in this function) I suspect it should be defined to CONFIG_SYS_CLK_FREQ. If you post a patch to fix them, I'll grab that one too and use the PR as is, thanks!
Hi, Tom. I already send patches of ARM board of rmoble with patch of serial_sh. http://lists.denx.de/pipermail/u-boot/2013-September/163796.html http://lists.denx.de/pipermail/u-boot/2013-September/163795.html I think that Albert takes these in his repository about the board of ARM. I I should have written on the pull-request about this. Best regards, Nobuhiro 2013/10/18 Tom Rini <trini@ti.com>: > On Thu, Oct 17, 2013 at 09:51:05AM +0900, Nobuhiro Iwamatsu wrote: > >> Hi Tom, >> >> Please pull u-boot-sh master branch. >> >> Best regards, >> Nobuhiro >> The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586: >> >> Prepare v2013.10 (2013-10-16 13:08:12 -0400) >> >> are available in the git repository at: >> >> git://git.denx.de/u-boot-sh.git master >> >> for you to fetch changes up to 7f2013d47c8c62c2373cafe68d6ba4649099e49a: >> >> serial: sh: Add support R8A7791 (2013-10-17 09:43:36 +0900) >> >> ---------------------------------------------------------------- >> Nobuhiro Iwamatsu (8): >> sh: timer: Mask bit of timer prescaler >> sh: timer: Remove static global variable >> sh: cache: Change cache API to defines as U-Boot >> sh: timer: Change definition of clock of TMU >> serial: sh: Change definition of clock of SCIF >> sh: boards: Change clock definition of SCIF and TMU >> serial: sh: Add support R8A7790 >> serial: sh: Add support R8A7791 > > OK, this breaks the two ARM boards that also use the serial_sh.c driver: > serial_sh.c:53:2: error: 'CONFIG_SH_SCIF_CLK_FREQ' undeclared (first use in this function) > > I suspect it should be defined to CONFIG_SYS_CLK_FREQ. > > If you post a patch to fix them, I'll grab that one too and use the PR > as is, thanks! > > -- > Tom
Hi Nobuhiro, On Sat, 19 Oct 2013 06:14:10 +0900, Nobuhiro Iwamatsu <iwamatsu@nigauri.org> wrote: > Hi, Tom. > > I already send patches of ARM board of rmoble with patch of serial_sh. > http://lists.denx.de/pipermail/u-boot/2013-September/163796.html > http://lists.denx.de/pipermail/u-boot/2013-September/163795.html > > I think that Albert takes these in his repository about the board of ARM. > I I should have written on the pull-request about this. I think I commented the series, and particularly, I suggested that the patches be ordered so that ARM boards wouldn't break. As for applying, I'm fine with mainline applying it through the sh repo once fixed; I'll ack the ARM patches in the series so that Tom knows I'm ok with it. > Best regards, > Nobuhiro Amicalement,
On Thu, Oct 17, 2013 at 09:51:05AM +0900, Nobuhiro Iwamatsu wrote: > Hi Tom, > > Please pull u-boot-sh master branch. > > Best regards, > Nobuhiro > The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586: > > Prepare v2013.10 (2013-10-16 13:08:12 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-sh.git master > > for you to fetch changes up to 7f2013d47c8c62c2373cafe68d6ba4649099e49a: > > serial: sh: Add support R8A7791 (2013-10-17 09:43:36 +0900) > > ---------------------------------------------------------------- > Nobuhiro Iwamatsu (8): > sh: timer: Mask bit of timer prescaler > sh: timer: Remove static global variable > sh: cache: Change cache API to defines as U-Boot > sh: timer: Change definition of clock of TMU > serial: sh: Change definition of clock of SCIF > sh: boards: Change clock definition of SCIF and TMU > serial: sh: Add support R8A7790 > serial: sh: Add support R8A7791 > > arch/sh/cpu/sh4/cache.c | 4 ++-- > arch/sh/cpu/sh4/cpu.c | 2 +- > arch/sh/include/asm/cache.h | 3 --- > arch/sh/lib/time.c | 10 ++++++---- > drivers/serial/serial_sh.c | 5 ++++- > drivers/serial/serial_sh.h | 13 +++++++++++++ > include/configs/MigoR.h | 2 ++ > include/configs/ap325rxa.h | 2 ++ > include/configs/ap_sh4a_4a.h | 2 ++ > include/configs/ecovec.h | 2 ++ > include/configs/espt.h | 2 ++ > include/configs/mpr2.h | 2 ++ > include/configs/ms7720se.h | 2 ++ > include/configs/ms7722se.h | 2 ++ > include/configs/ms7750se.h | 2 ++ > include/configs/r0p7734.h | 2 ++ > include/configs/r2dplus.h | 2 ++ > include/configs/r7780mp.h | 2 ++ > include/configs/rsk7203.h | 2 ++ > include/configs/rsk7264.h | 2 ++ > include/configs/rsk7269.h | 2 ++ > include/configs/sh7752evb.h | 2 ++ > include/configs/sh7757lcr.h | 2 ++ > include/configs/sh7763rdp.h | 2 ++ > include/configs/sh7785lcr.h | 2 ++ > include/configs/shmin.h | 2 ++ > include/sh_tmu.h | 2 +- > 27 files changed, 67 insertions(+), 12 deletions(-) Applied to u-boot/master, thanks!