diff mbox

[net-next-2.6] net: loopback device dev->addr_len fix

Message ID 4A2CEB9E.7080109@gmail.com
State Superseded, archived
Delegated to: David Miller
Headers show

Commit Message

Eric Dumazet June 8, 2009, 10:44 a.m. UTC
Vegard Nossum a écrit :
> 2009/6/7 John Dykstra <john.dykstra1@gmail.com>:
>> On Sat, 2009-05-30 at 22:23 +0200, Vegard Nossum wrote:
>>> It seems that loopback's hardware address is never initialized by the
>>> kernel. So if userspace attempts to read this address before it has
>>> been set, the kernel will return some uninitialized data (only 6
>>> bytes, though).
>> Thank you for the report, Vegard.
>>
>> I've been unable to reproduce the problem you describe, using
>> 2.6-30-rc8, this test program and a couple of kernel builds for system
>> load:
> [...]
>> ------------------------------------------------------------------
>>
>> Looking at the kernel code, it appears that all bytes of struct
>> net_device, including the L2 address, are initialized to zeros at
>> interface creation time.
>>
>> Can you spot a difference between your test procedures and mine that
>> would enable me to reproduce the problem?
> 
> Hi,
> 
> I just tried your test program on a linux-next kernel, it works beautifully :-)
> 
> (I made one change: The stack grows downwards on x86, so I think you
> should put child_stack + 16386 as the stack to clone()?)
> 
> As I wrote in reply to Stephen Hemminger, this problem seems to be
> caused by a particular patch in linux-next:
> 
> commit f001fde5eadd915f4858d22ed70d7040f48767cf
> Author: Jiri Pirko <jpirko@redhat.com>
> Date:   Tue May 5 02:48:28 2009 +0000
> 
>    net: introduce a list of device addresses dev_addr_list (v6)
> 

I believe following patch should fix this problem.

Thank you

[PATCH net-next-2.6] net: loopback device dev->addr_len fix

commit f001fde5eadd915f4858d22ed70d7040f48767cf 
(net: introduce a list of device addresses dev_addr_list (v6))
added one regression Vegard Nossum found in its testings.

loopback device doesnt have a hw address, we should set its
dev->addr_len to 0, not ETH_ALEN.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index da472c6..40ded4e 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -166,7 +166,7 @@  static void loopback_setup(struct net_device *dev)
 {
 	dev->mtu		= (16 * 1024) + 20 + 20 + 12;
 	dev->hard_header_len	= ETH_HLEN;	/* 14	*/
-	dev->addr_len		= ETH_ALEN;	/* 6	*/
+	dev->addr_len		= 0;
 	dev->tx_queue_len	= 0;
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;