@@ -53,11 +53,11 @@ static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
}
/* Update control registers */
-static void puv3_rtc_setaie(int to)
+static void puv3_rtc_setaie(struct device *dev, int to)
{
unsigned int tmp;
- pr_debug("%s: aie=%d\n", __func__, to);
+ dev_dbg(dev, "%s: aie=%d\n", __func__, to);
tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
@@ -71,7 +71,7 @@ static int puv3_rtc_setpie(struct device *dev, int enabled)
{
unsigned int tmp;
- pr_debug("%s: pie=%d\n", __func__, enabled);
+ dev_debug(dev, "%s: pie=%d\n", __func__, enabled);
spin_lock_irq(&puv3_rtc_pie_lock);
tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
@@ -90,7 +90,7 @@ static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
{
rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
- pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
+ dev_dbg(dev, "read time %02x.%02x.%02x %02x/%02x/%02x\n",
rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
@@ -101,7 +101,7 @@ static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
{
unsigned long rtc_count = 0;
- pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
+ dev_dbg(dev, "set time %02d.%02d.%02d %02d/%02d/%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
@@ -119,7 +119,7 @@ static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
- pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+ dev_dbg(dev, "read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
alrm->enabled,
alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
@@ -132,7 +132,7 @@ static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
struct rtc_time *tm = &alrm->time;
unsigned long rtcalarm_count = 0;
- pr_debug("puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+ dev_dbg(dev, "puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
alrm->enabled,
tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
@@ -140,7 +140,7 @@ static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
rtc_tm_to_time(tm, &rtcalarm_count);
writel(rtcalarm_count, RTC_RTAR);
- puv3_rtc_setaie(alrm->enabled);
+ puv3_rtc_setaie(&dev->dev, alrm->enabled);
if (alrm->enabled)
enable_irq_wake(puv3_rtc_alarmno);
@@ -227,7 +227,7 @@ static int puv3_rtc_remove(struct platform_device *dev)
rtc_device_unregister(rtc);
puv3_rtc_setpie(&dev->dev, 0);
- puv3_rtc_setaie(0);
+ puv3_rtc_setaie(&dev->dev, 0);
release_resource(puv3_rtc_mem);
kfree(puv3_rtc_mem);
@@ -241,7 +241,7 @@ static int puv3_rtc_probe(struct platform_device *pdev)
struct resource *res;
int ret;
- pr_debug("%s: probe=%p\n", __func__, pdev);
+ dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
/* find the IRQs */
puv3_rtc_tickno = platform_get_irq(pdev, 1);
@@ -256,7 +256,7 @@ static int puv3_rtc_probe(struct platform_device *pdev)
return -ENOENT;
}
- pr_debug("PKUnity_rtc: tick irq %d, alarm irq %d\n",
+ dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
puv3_rtc_tickno, puv3_rtc_alarmno);
/* get the memory region */
Because dev_*() are used along with pr_debug() function in this code, the debug message is not tidy. This patch converts from pr_debug() to dev_dbg() since dev_*() are encouraged to use in device driver code. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> --- drivers/rtc/rtc-puv3.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)