new file mode 100644
@@ -0,0 +1,5549 @@
+/* Subroutines used for code generation of Andes NDS32 cpu for GNU compiler
+ Copyright (C) 2012-2013 Free Software Foundation, Inc.
+ Contributed by Andes Technology Corporation.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "tree.h"
+#include "rtl.h"
+#include "regs.h"
+#include "hard-reg-set.h"
+#include "insn-config.h" /* Required by recog.h. */
+#include "conditions.h"
+#include "output.h"
+#include "insn-attr.h" /* For DFA state_t. */
+#include "insn-codes.h" /* For CODE_FOR_xxx. */
+#include "reload.h" /* For push_reload(). */
+#include "flags.h"
+#include "function.h"
+#include "expr.h"
+#include "recog.h"
+#include "diagnostic-core.h"
+#include "df.h"
+#include "tm_p.h"
+#include "tm-constrs.h"
+#include "optabs.h" /* For GEN_FCN. */
+#include "target.h"
+#include "target-def.h"
+#include "langhooks.h" /* For add_builtin_function(). */
+#include "ggc.h"
+
+/* ------------------------------------------------------------------------ */
+
+/* This file is divided into six parts:
+
+ PART 1: Auxiliary static variable definitions and
+ target hook static variable definitions.
+
+ PART 2: Auxiliary static function definitions.
+
+ PART 3: Implement target hook stuff definitions.
+
+ PART 4: Implemet extern function definitions,
+ the prototype is in nds32-protos.h.
+
+ PART 5: Initialize target hook structure and definitions. */
+
+/* ------------------------------------------------------------------------ */
+
+/* PART 1: Auxiliary static variable definitions and
+ target hook static variable definitions. */
+
+/* Refer to nds32.h, there are maximum 73 isr vectors in nds32 architecture.
+ 0 for reset handler with __attribute__((reset())),
+ 1-8 for exception handler with __attribute__((exception(1,...,8))),
+ and 9-72 for interrupt handler with __attribute__((interrupt(0,...,63))).
+ We use an array to record essential information for each vector. */
+static struct nds32_isr_info nds32_isr_vectors[NDS32_N_ISR_VECTORS];
+
+/* Define intrinsic register names.
+ Please refer to nds32_intrinsic.h file, the index is corresponding to
+ 'enum nds32_intrinsic_registers' data type values.
+ NOTE that the base value starting from 1024. */
+static const char * const nds32_intrinsic_register_names[] =
+{
+ "$PSW", "$IPSW", "$ITYPE", "$IPC"
+};
+
+/* Defining target-specific uses of __attribute__. */
+static const struct attribute_spec nds32_attribute_table[] =
+{
+ /* Syntax: { name, min_len, max_len, decl_required, type_required,
+ function_type_required, handler, affects_type_identity } */
+
+ /* The interrupt vid: [0-63]+ (actual vector number starts from 9 to 72). */
+ { "interrupt", 1, 64, false, false, false, NULL, false },
+ /* The exception vid: [1-8]+ (actual vector number starts from 1 to 8). */
+ { "exception", 1, 8, false, false, false, NULL, false },
+ /* Argument is user's interrupt numbers. The vector number is always 0. */
+ { "reset", 1, 1, false, false, false, NULL, false },
+
+ /* The attributes describing isr nested type. */
+ { "nested", 0, 0, false, false, false, NULL, false },
+ { "not_nested", 0, 0, false, false, false, NULL, false },
+ { "nested_ready", 0, 0, false, false, false, NULL, false },
+
+ /* The attributes describing isr register save scheme. */
+ { "save_all", 0, 0, false, false, false, NULL, false },
+ { "partial_save", 0, 0, false, false, false, NULL, false },
+
+ /* The attributes used by reset attribute. */
+ { "nmi", 1, 1, false, false, false, NULL, false },
+ { "warm", 1, 1, false, false, false, NULL, false },
+
+ /* The attribute telling no prologue/epilogue. */
+ { "naked", 0, 0, false, false, false, NULL, false },
+
+ /* The last attribute spec is set to be NULL. */
+ { NULL, 0, 0, false, false, false, NULL, false }
+};
+
+
+/* ------------------------------------------------------------------------ */
+
+/* PART 2: Auxiliary static function definitions. */
+
+/* Function to save and restore machine-specific function data. */
+static struct machine_function *
+nds32_init_machine_status (void)
+{
+ struct machine_function *machine;
+ machine = ggc_alloc_cleared_machine_function ();
+
+ /* Initially assume this function needs prologue/epilogue. */
+ machine->naked_p = 0;
+
+ /* Initially assume this function does NOT use fp_as_gp optimization. */
+ machine->fp_as_gp_p = 0;
+
+ return machine;
+}
+
+/* Function to compute stack frame size and
+ store into cfun->machine structure. */
+static void
+nds32_compute_stack_frame (void)
+{
+ int r;
+ int block_size;
+
+ /* Before computing everything for stack frame size,
+ we check if it is still worth to use fp_as_gp optimization.
+ If it is, the 'df_regs_ever_live_p (FP_REGNUM)' will be set
+ so that $fp will be saved on stack. */
+ cfun->machine->fp_as_gp_p = nds32_fp_as_gp_check_available ();
+
+ /* Because nds32_compute_stack_frame() will be called from different place,
+ everytime we enter this function, we have to assume this function
+ needs prologue/epilogue. */
+ cfun->machine->naked_p = 0;
+
+ /* Get variadic arguments size to prepare pretend arguments and
+ push them into stack at prologue.
+ Currently, we do not push variadic arguments by ourself.
+ We have GCC handle all the works.
+ The caller will push all corresponding nameless arguments into stack,
+ and the callee is able to retrieve them without problems.
+ These variables are still preserved in case one day
+ we would like caller passing arguments with registers. */
+ cfun->machine->va_args_size = 0;
+ cfun->machine->va_args_first_regno = SP_REGNUM;
+ cfun->machine->va_args_last_regno = SP_REGNUM;
+
+ /* Get local variables, incoming variables, and temporary variables size.
+ Note that we need to make sure it is 8-byte alignment because
+ there may be no padding bytes if we are using LRA. */
+ cfun->machine->local_size = NDS32_ROUND_UP_DOUBLE_WORD (get_frame_size ());
+
+ /* Get outgoing arguments size. */
+ cfun->machine->out_args_size = crtl->outgoing_args_size;
+
+ /* If $fp value is required to be saved on stack, it needs 4 bytes space.
+ Check whether $fp is ever live. */
+ cfun->machine->fp_size = (df_regs_ever_live_p (FP_REGNUM)) ? 4 : 0;
+
+ /* If $gp value is required to be saved on stack, it needs 4 bytes space.
+ Check whether we are using PIC code genration. */
+ cfun->machine->gp_size = (flag_pic) ? 4 : 0;
+
+ /* If $lp value is required to be saved on stack, it needs 4 bytes space.
+ Check whether $lp is ever live. */
+ cfun->machine->lp_size = (df_regs_ever_live_p (LP_REGNUM)) ? 4 : 0;
+
+ /* Initially there is no padding bytes. */
+ cfun->machine->callee_saved_area_padding_bytes = 0;
+
+ /* Calculate the bytes of saving callee-saved registers on stack. */
+ cfun->machine->callee_saved_regs_size = 0;
+ cfun->machine->callee_saved_regs_first_regno = SP_REGNUM;
+ cfun->machine->callee_saved_regs_last_regno = SP_REGNUM;
+ /* Currently, there is no need to check $r28~$r31
+ because we will save them in another way. */
+ for (r = 0; r < 28; r++)
+ {
+ if (NDS32_REQUIRED_CALLEE_SAVED_P (r))
+ {
+ /* Mark the first required callee-saved register
+ (only need to set it once).
+ If first regno == SP_REGNUM, we can tell that
+ it is the first time to be here. */
+ if (cfun->machine->callee_saved_regs_first_regno == SP_REGNUM)
+ cfun->machine->callee_saved_regs_first_regno = r;
+ /* Mark the last required callee-saved register. */
+ cfun->machine->callee_saved_regs_last_regno = r;
+ }
+ }
+
+ /* Check if this function can omit prologue/epilogue code fragment.
+ If there is 'naked' attribute in this function,
+ we can set 'naked_p' flag to indicate that
+ we do not have to generate prologue/epilogue.
+ Or, if all the following conditions succeed,
+ we can set this function 'naked_p' as well:
+ condition 1: first_regno == last_regno == SP_REGNUM,
+ which means we do not have to save
+ any callee-saved registers.
+ condition 2: Both $lp and $fp are NOT live in this function,
+ which means we do not need to save them.
+ condition 3: There is no local_size, which means
+ we do not need to adjust $sp. */
+ if (lookup_attribute ("naked", DECL_ATTRIBUTES (current_function_decl))
+ || (cfun->machine->callee_saved_regs_first_regno == SP_REGNUM
+ && cfun->machine->callee_saved_regs_last_regno == SP_REGNUM
+ && !df_regs_ever_live_p (FP_REGNUM)
+ && !df_regs_ever_live_p (LP_REGNUM)
+ && cfun->machine->local_size == 0))
+ {
+ /* Set this function 'naked_p' and
+ other functions can check this flag. */
+ cfun->machine->naked_p = 1;
+
+ /* No need to save $fp, $gp, and $lp.
+ We should set these value to be zero
+ so that nds32_initial_elimination_offset() can work properly. */
+ cfun->machine->fp_size = 0;
+ cfun->machine->gp_size = 0;
+ cfun->machine->lp_size = 0;
+
+ /* If stack usage computation is required,
+ we need to provide the static stack size. */
+ if (flag_stack_usage_info)
+ current_function_static_stack_size = 0;
+
+ /* No need to do following adjustment, return immediately. */
+ return;
+ }
+
+ /* Adjustment for v3push instructions:
+ If we are using v3push (push25/pop25) instructions,
+ we need to make sure Rb is $r6 and Re is
+ located on $r6, $r8, $r10, or $r14.
+ Some results above will be discarded and recomputed.
+ Note that it is only available under V3/V3M ISA. */
+ if (TARGET_V3PUSH)
+ {
+ /* Recompute:
+ cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
+ cfun->machine->callee_saved_regs_first_regno
+ cfun->machine->callee_saved_regs_last_regno */
+
+ /* For v3push instructions, $fp, $gp, and $lp are always saved. */
+ cfun->machine->fp_size = 4;
+ cfun->machine->gp_size = 4;
+ cfun->machine->lp_size = 4;
+
+ /* Remember to set Rb = $r6. */
+ cfun->machine->callee_saved_regs_first_regno = 6;
+
+ if (cfun->machine->callee_saved_regs_last_regno <= 6)
+ {
+ /* Re = $r6 */
+ cfun->machine->callee_saved_regs_last_regno = 6;
+ }
+ else if (cfun->machine->callee_saved_regs_last_regno <= 8)
+ {
+ /* Re = $r8 */
+ cfun->machine->callee_saved_regs_last_regno = 8;
+ }
+ else if (cfun->machine->callee_saved_regs_last_regno <= 10)
+ {
+ /* Re = $r10 */
+ cfun->machine->callee_saved_regs_last_regno = 10;
+ }
+ else if (cfun->machine->callee_saved_regs_last_regno <= 14)
+ {
+ /* Re = $r14 */
+ cfun->machine->callee_saved_regs_last_regno = 14;
+ }
+ else if (cfun->machine->callee_saved_regs_last_regno == SP_REGNUM)
+ {
+ /* If last_regno is SP_REGNUM, which means
+ it is never changed, so set it to Re = $r6. */
+ cfun->machine->callee_saved_regs_last_regno = 6;
+ }
+ else
+ {
+ /* The program flow should not go here. */
+ gcc_unreachable ();
+ }
+ }
+
+ /* We have correctly set callee_saved_regs_first_regno
+ and callee_saved_regs_last_regno.
+ Initially, the callee_saved_regs_size is supposed to be 0.
+ As long as callee_saved_regs_last_regno is not SP_REGNUM,
+ we can update callee_saved_regs_size with new size. */
+ if (cfun->machine->callee_saved_regs_last_regno != SP_REGNUM)
+ {
+ /* Compute pushed size of callee-saved registers. */
+ cfun->machine->callee_saved_regs_size
+ = 4 * (cfun->machine->callee_saved_regs_last_regno
+ - cfun->machine->callee_saved_regs_first_regno
+ + 1);
+ }
+
+ /* Important: We need to make sure that
+ (va_args_size + fp_size + gp_size
+ + lp_size + callee_saved_regs_size)
+ is 8-byte alignment.
+ If it is not, calculate the padding bytes. */
+ block_size = cfun->machine->va_args_size
+ + cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size;
+ if (!NDS32_DOUBLE_WORD_ALIGN_P (block_size))
+ {
+ cfun->machine->callee_saved_area_padding_bytes
+ = NDS32_ROUND_UP_DOUBLE_WORD (block_size) - block_size;
+ }
+
+ /* If stack usage computation is required,
+ we need to provide the static stack size. */
+ if (flag_stack_usage_info)
+ {
+ current_function_static_stack_size
+ = NDS32_ROUND_UP_DOUBLE_WORD (block_size)
+ + cfun->machine->local_size
+ + cfun->machine->out_args_size;
+ }
+}
+
+/* Function to create a parallel rtx pattern
+ which presents stack push multiple behavior.
+ The overall concept are:
+ "push registers to memory",
+ "adjust stack pointer". */
+static rtx
+nds32_gen_stack_push_multiple (rtx Rb, rtx Re,
+ rtx En4 ATTRIBUTE_UNUSED)
+{
+ int regno;
+ int extra_count;
+ int num_use_regs;
+ int par_index;
+ int offset;
+
+ rtx reg;
+ rtx mem;
+ rtx push_rtx;
+ rtx adjust_sp_rtx;
+ rtx parallel_insn;
+
+ /* We need to provide a customized rtx which contains
+ necessary information for data analysis,
+ so we create a parallel rtx like this:
+ (parallel [(set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
+ (reg:SI LP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
+ (reg:SI GP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
+ (reg:SI FP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
+ (reg:SI Re))
+ ...
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
+ (reg:SI Rb+1))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -32)))
+ (reg:SI Rb))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int -32)))]) */
+
+ /* Calculate the number of registers that will be pushed. */
+ extra_count = 0;
+ if (cfun->machine->fp_size)
+ extra_count++;
+ if (cfun->machine->gp_size)
+ extra_count++;
+ if (cfun->machine->lp_size)
+ extra_count++;
+ /* Note that Rb and Re may be SP_REGNUM. DO NOT count it in. */
+ if (REGNO (Rb) == SP_REGNUM && REGNO (Re) == SP_REGNUM)
+ num_use_regs = extra_count;
+ else
+ num_use_regs = REGNO (Re) - REGNO (Rb) + 1 + extra_count;
+
+ /* In addition to used registers,
+ we need one more space for (set sp sp-x) rtx. */
+ parallel_insn = gen_rtx_PARALLEL (VOIDmode,
+ rtvec_alloc (num_use_regs + 1));
+ par_index = 0;
+
+ /* Initialize offset and start to create push behavior. */
+ offset = 0;
+
+ /* Create (set mem lp), (set mem gp), and (set mem fp) if necessary. */
+ if (cfun->machine->lp_size)
+ {
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, LP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ }
+ if (cfun->machine->gp_size)
+ {
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, GP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ }
+ if (cfun->machine->fp_size)
+ {
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, FP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ }
+
+ /* Create (set mem regX) from Re down to Rb+1, Rb. */
+ for (regno = REGNO (Re); regno >= (int) REGNO (Rb); regno--)
+ {
+ /* Rb and Re may be SP_REGNUM.
+ We need to break this loop immediately. */
+ if (regno == SP_REGNUM)
+ break;
+
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, regno);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ }
+
+ /* Create (set sp sp-x). */
+ adjust_sp_rtx
+ = gen_rtx_SET (VOIDmode,
+ stack_pointer_rtx,
+ plus_constant (Pmode, stack_pointer_rtx, offset));
+ XVECEXP (parallel_insn, 0, par_index) = adjust_sp_rtx;
+ RTX_FRAME_RELATED_P (adjust_sp_rtx) = 1;
+
+ return parallel_insn;
+}
+
+/* Function to create a parallel rtx pattern
+ which presents stack pop multiple behavior.
+ The overall concept are:
+ "pop registers from memory",
+ "adjust stack pointer". */
+static rtx
+nds32_gen_stack_pop_multiple (rtx Rb, rtx Re,
+ rtx En4 ATTRIBUTE_UNUSED)
+{
+ int regno;
+ int extra_count;
+ int num_use_regs;
+ int par_index;
+ int offset;
+
+ rtx reg;
+ rtx mem;
+ rtx pop_rtx;
+ rtx adjust_sp_rtx;
+ rtx parallel_insn;
+
+ /* We need to provide a customized rtx which contains
+ necessary information for data analysis,
+ so we create a parallel rtx like this:
+ (parallel [(set (reg:SI Rb)
+ (mem (reg:SI SP_REGNUM)))
+ (set (reg:SI Rb+1)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
+ ...
+ (set (reg:SI Re)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
+ (set (reg:SI FP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
+ (set (reg:SI GP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
+ (set (reg:SI LP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int 32)))]) */
+
+ /* Calculate the number of registers that will be poped. */
+ extra_count = 0;
+ if (cfun->machine->fp_size)
+ extra_count++;
+ if (cfun->machine->gp_size)
+ extra_count++;
+ if (cfun->machine->lp_size)
+ extra_count++;
+ /* Note that Rb and Re may be SP_REGNUM. DO NOT count it in. */
+ if (REGNO (Rb) == SP_REGNUM && REGNO (Re) == SP_REGNUM)
+ num_use_regs = extra_count;
+ else
+ num_use_regs = REGNO (Re) - REGNO (Rb) + 1 + extra_count;
+
+ /* In addition to used registers,
+ we need one more space for (set sp sp+x) rtx. */
+ parallel_insn = gen_rtx_PARALLEL (VOIDmode,
+ rtvec_alloc (num_use_regs + 1));
+ par_index = 0;
+
+ /* Initialize offset and start to create pop behavior. */
+ offset = 0;
+
+ /* Create (set regX mem) from Rb, Rb+1 up to Re. */
+ for (regno = REGNO (Rb); regno <= (int) REGNO (Re); regno++)
+ {
+ /* Rb and Re may be SP_REGNUM.
+ We need to break this loop immediately. */
+ if (regno == SP_REGNUM)
+ break;
+
+ reg = gen_rtx_REG (SImode, regno);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ }
+
+ /* Create (set fp mem), (set gp mem), and (set lp mem) if necessary. */
+ if (cfun->machine->fp_size)
+ {
+ reg = gen_rtx_REG (SImode, FP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ }
+ if (cfun->machine->gp_size)
+ {
+ reg = gen_rtx_REG (SImode, GP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ }
+ if (cfun->machine->lp_size)
+ {
+ reg = gen_rtx_REG (SImode, LP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ }
+
+ /* Create (set sp sp+x). */
+ adjust_sp_rtx
+ = gen_rtx_SET (VOIDmode,
+ stack_pointer_rtx,
+ plus_constant (Pmode, stack_pointer_rtx, offset));
+ XVECEXP (parallel_insn, 0, par_index) = adjust_sp_rtx;
+ RTX_FRAME_RELATED_P (adjust_sp_rtx) = 1;
+
+ return parallel_insn;
+}
+
+/* Function to create a parallel rtx pattern
+ which presents stack v3push behavior.
+ The overall concept are:
+ "push registers to memory",
+ "adjust stack pointer". */
+static rtx
+nds32_gen_stack_v3push (rtx Rb,
+ rtx Re,
+ rtx En4 ATTRIBUTE_UNUSED,
+ rtx imm8u)
+{
+ int regno;
+ int num_use_regs;
+ int par_index;
+ int offset;
+
+ rtx reg;
+ rtx mem;
+ rtx push_rtx;
+ rtx adjust_sp_rtx;
+ rtx parallel_insn;
+
+ /* We need to provide a customized rtx which contains
+ necessary information for data analysis,
+ so we create a parallel rtx like this:
+ (parallel [(set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
+ (reg:SI LP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
+ (reg:SI GP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
+ (reg:SI FP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
+ (reg:SI Re))
+ ...
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
+ (reg:SI Rb+1))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -32)))
+ (reg:SI Rb))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int -32-imm8u)))]) */
+
+ /* Calculate the number of registers that will be pushed.
+ Since $fp, $gp, and $lp is always pushed with v3push instruction,
+ we need to count these three registers.
+ Under v3push, Rb is $r6, while Re is $r6, $r8, $r10, or $r14.
+ So there is no need to worry about Rb=Re=SP_REGNUM case. */
+ num_use_regs = REGNO (Re) - REGNO (Rb) + 1 + 3;
+
+ /* In addition to used registers,
+ we need one more space for (set sp sp-x-imm8u) rtx. */
+ parallel_insn = gen_rtx_PARALLEL (VOIDmode,
+ rtvec_alloc (num_use_regs + 1));
+ par_index = 0;
+
+ /* Initialize offset and start to create push behavior. */
+ offset = 0;
+
+ /* Create (set mem lp). */
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, LP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ /* Create (set mem gp). */
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, GP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ /* Create (set mem fp). */
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, FP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+
+ /* Create (set mem regX) from Re down to Rb+1, Rb.
+ Under v3push, Rb is $r6, while Re is $r6, $r8, $r10, or $r14.
+ So there is no need to worry about Rb=Re=SP_REGNUM case. */
+ for (regno = REGNO (Re); regno >= (int) REGNO (Rb); regno--)
+ {
+ offset = offset - 4;
+ reg = gen_rtx_REG (SImode, regno);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ push_rtx = gen_rtx_SET (VOIDmode, mem, reg);
+ XVECEXP (parallel_insn, 0, par_index) = push_rtx;
+ RTX_FRAME_RELATED_P (push_rtx) = 1;
+ par_index++;
+ }
+
+ /* Create (set sp sp-x-imm8u). */
+ adjust_sp_rtx
+ = gen_rtx_SET (VOIDmode,
+ stack_pointer_rtx,
+ plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset - INTVAL (imm8u)));
+ XVECEXP (parallel_insn, 0, par_index) = adjust_sp_rtx;
+ RTX_FRAME_RELATED_P (adjust_sp_rtx) = 1;
+
+ return parallel_insn;
+}
+
+/* Function to create a parallel rtx pattern
+ which presents stack v3pop behavior.
+ The overall concept are:
+ "pop registers from memory",
+ "adjust stack pointer". */
+static rtx
+nds32_gen_stack_v3pop (rtx Rb,
+ rtx Re,
+ rtx En4 ATTRIBUTE_UNUSED,
+ rtx imm8u)
+{
+ int regno;
+ int num_use_regs;
+ int par_index;
+ int offset;
+
+ rtx reg;
+ rtx mem;
+ rtx pop_rtx;
+ rtx adjust_sp_rtx;
+ rtx parallel_insn;
+
+ /* We need to provide a customized rtx which contains
+ necessary information for data analysis,
+ so we create a parallel rtx like this:
+ (parallel [(set (reg:SI Rb)
+ (mem (reg:SI SP_REGNUM)))
+ (set (reg:SI Rb+1)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
+ ...
+ (set (reg:SI Re)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
+ (set (reg:SI FP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
+ (set (reg:SI GP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
+ (set (reg:SI LP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int 32+imm8u)))]) */
+
+ /* Calculate the number of registers that will be poped.
+ Since $fp, $gp, and $lp is always poped with v3pop instruction,
+ we need to count these three registers.
+ Under v3push, Rb is $r6, while Re is $r6, $r8, $r10, or $r14.
+ So there is no need to worry about Rb=Re=SP_REGNUM case. */
+ num_use_regs = REGNO (Re) - REGNO (Rb) + 1 + 3;
+
+ /* In addition to used registers,
+ we need one more space for (set sp sp+x+imm8u) rtx. */
+ parallel_insn = gen_rtx_PARALLEL (VOIDmode,
+ rtvec_alloc (num_use_regs + 1));
+ par_index = 0;
+
+ /* Initialize offset and start to create pop behavior. */
+ offset = 0;
+
+ /* Create (set regX mem) from Rb, Rb+1 up to Re.
+ Under v3pop, Rb is $r6, while Re is $r6, $r8, $r10, or $r14.
+ So there is no need to worry about Rb=Re=SP_REGNUM case. */
+ for (regno = REGNO (Rb); regno <= (int) REGNO (Re); regno++)
+ {
+ reg = gen_rtx_REG (SImode, regno);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ }
+
+ /* Create (set mem fp). */
+ reg = gen_rtx_REG (SImode, FP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ /* Create (set mem gp). */
+ reg = gen_rtx_REG (SImode, GP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+ /* Create (set mem lp). */
+ reg = gen_rtx_REG (SImode, LP_REGNUM);
+ mem = gen_frame_mem (SImode, plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset));
+ pop_rtx = gen_rtx_SET (VOIDmode, reg, mem);
+ XVECEXP (parallel_insn, 0, par_index) = pop_rtx;
+ RTX_FRAME_RELATED_P (pop_rtx) = 1;
+ offset = offset + 4;
+ par_index++;
+
+ /* Create (set sp sp+x+imm8u). */
+ adjust_sp_rtx
+ = gen_rtx_SET (VOIDmode,
+ stack_pointer_rtx,
+ plus_constant (Pmode,
+ stack_pointer_rtx,
+ offset + INTVAL (imm8u)));
+ XVECEXP (parallel_insn, 0, par_index) = adjust_sp_rtx;
+ RTX_FRAME_RELATED_P (adjust_sp_rtx) = 1;
+
+ return parallel_insn;
+}
+
+/* A helper function to emit section head template. */
+static void
+nds32_emit_section_head_template (char section_name[],
+ char symbol_name[],
+ int align_value,
+ bool object_p)
+{
+ const char *flags_str;
+ const char *type_str;
+
+ flags_str = (object_p) ? "\"a\"" : "\"ax\"";
+ type_str = (object_p) ? "@object" : "@function";
+
+ fprintf (asm_out_file, "\t.section\t%s, %s\n", section_name, flags_str);
+ fprintf (asm_out_file, "\t.align\t%d\n", align_value);
+ fprintf (asm_out_file, "\t.global\t%s\n", symbol_name);
+ fprintf (asm_out_file, "\t.type\t%s, %s\n", symbol_name, type_str);
+ fprintf (asm_out_file, "%s:\n", symbol_name);
+}
+
+/* A helper function to emit section tail template. */
+static void
+nds32_emit_section_tail_template (char symbol_name[])
+{
+ fprintf (asm_out_file, "\t.size\t%s, .-%s\n", symbol_name, symbol_name);
+}
+
+/* Function to emit isr jump table section. */
+static void
+nds32_emit_isr_jmptbl_section (int vector_id)
+{
+ char section_name[100];
+ char symbol_name[100];
+
+ /* Prepare jmptbl section and symbol name. */
+ snprintf (section_name, sizeof (section_name),
+ ".nds32_jmptbl.%02d", vector_id);
+ snprintf (symbol_name, sizeof (symbol_name),
+ "_nds32_jmptbl_%02d", vector_id);
+
+ nds32_emit_section_head_template (section_name, symbol_name, 2, true);
+ fprintf (asm_out_file, "\t.word\t%s\n",
+ nds32_isr_vectors[vector_id].func_name);
+ nds32_emit_section_tail_template (symbol_name);
+}
+
+/* Function to emit isr vector section. */
+static void
+nds32_emit_isr_vector_section (int vector_id)
+{
+ unsigned int vector_number_offset = 0;
+ const char *c_str = "CATEGORY";
+ const char *sr_str = "SR";
+ const char *nt_str = "NT";
+ const char *vs_str = "VS";
+ char first_level_handler_name[100];
+ char section_name[100];
+ char symbol_name[100];
+
+ /* Set the vector number offset so that we can calculate
+ the value that user specifies in the attribute.
+ We also prepare the category string for first level handler name. */
+ switch (nds32_isr_vectors[vector_id].category)
+ {
+ case NDS32_ISR_INTERRUPT:
+ vector_number_offset = 9;
+ c_str = "i";
+ break;
+ case NDS32_ISR_EXCEPTION:
+ vector_number_offset = 0;
+ c_str = "e";
+ break;
+ case NDS32_ISR_NONE:
+ case NDS32_ISR_RESET:
+ /* Normally it should not be here. */
+ gcc_unreachable ();
+ break;
+ }
+
+ /* Prepare save reg string for first level handler name. */
+ switch (nds32_isr_vectors[vector_id].save_reg)
+ {
+ case NDS32_SAVE_ALL:
+ sr_str = "sa";
+ break;
+ case NDS32_PARTIAL_SAVE:
+ sr_str = "ps";
+ break;
+ }
+
+ /* Prepare nested type string for first level handler name. */
+ switch (nds32_isr_vectors[vector_id].nested_type)
+ {
+ case NDS32_NESTED:
+ nt_str = "ns";
+ break;
+ case NDS32_NOT_NESTED:
+ nt_str = "nn";
+ break;
+ case NDS32_NESTED_READY:
+ nt_str = "nr";
+ break;
+ }
+
+ /* Currently we have 4-byte or 16-byte size for each vector.
+ If it is 4-byte, the first level handler name has suffix string "_4b". */
+ vs_str = (nds32_isr_vector_size == 4) ? "_4b" : "";
+
+ /* Now we can create first level handler name. */
+ snprintf (first_level_handler_name, sizeof (first_level_handler_name),
+ "_nds32_%s_%s_%s%s", c_str, sr_str, nt_str, vs_str);
+
+ /* Prepare vector section and symbol name. */
+ snprintf (section_name, sizeof (section_name),
+ ".nds32_vector.%02d", vector_id);
+ snprintf (symbol_name, sizeof (symbol_name),
+ "_nds32_vector_%02d%s", vector_id, vs_str);
+
+
+ /* Everything is ready. We can start emit vector section content. */
+ nds32_emit_section_head_template (section_name, symbol_name,
+ floor_log2 (nds32_isr_vector_size), false);
+
+ /* According to the vector size, the instructions in the
+ vector section may be different. */
+ if (nds32_isr_vector_size == 4)
+ {
+ /* This block is for 4-byte vector size.
+ Hardware $VID support is necessary and only one instruction
+ is needed in vector section. */
+ fprintf (asm_out_file, "\tj\t%s ! jump to first level handler\n",
+ first_level_handler_name);
+ }
+ else
+ {
+ /* This block is for 16-byte vector size.
+ There is NO hardware $VID so that we need several instructions
+ such as pushing GPRs and preparing software vid at vector section.
+ For pushing GPRs, there are four variations for
+ 16-byte vector content and we have to handle each combination.
+ For preparing software vid, note that the vid need to
+ be substracted vector_number_offset. */
+ if (TARGET_REDUCED_REGS)
+ {
+ if (nds32_isr_vectors[vector_id].save_reg == NDS32_SAVE_ALL)
+ {
+ /* Case of reduced set registers and save_all attribute. */
+ fprintf (asm_out_file, "\t! reduced set regs + save_all\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r15, [$sp], $r15, 0xf\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r0, [$sp], $r10, 0x0\n");
+
+ }
+ else
+ {
+ /* Case of reduced set registers and partial_save attribute. */
+ fprintf (asm_out_file, "\t! reduced set regs + partial_save\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r15, [$sp], $r15, 0x2\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r0, [$sp], $r5, 0x0\n");
+ }
+ }
+ else
+ {
+ if (nds32_isr_vectors[vector_id].save_reg == NDS32_SAVE_ALL)
+ {
+ /* Case of full set registers and save_all attribute. */
+ fprintf (asm_out_file, "\t! full set regs + save_all\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r0, [$sp], $r27, 0xf\n");
+ }
+ else
+ {
+ /* Case of full set registers and partial_save attribute. */
+ fprintf (asm_out_file, "\t! full set regs + partial_save\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r15, [$sp], $r27, 0x2\n");
+ fprintf (asm_out_file, "\tsmw.adm\t$r0, [$sp], $r5, 0x0\n");
+ }
+ }
+
+ fprintf (asm_out_file, "\tmovi\t$r0, %d ! preparing software vid\n",
+ vector_id - vector_number_offset);
+ fprintf (asm_out_file, "\tj\t%s ! jump to first level handler\n",
+ first_level_handler_name);
+ }
+
+ nds32_emit_section_tail_template (symbol_name);
+}
+
+/* Function to emit isr reset handler content.
+ Including all jmptbl/vector references, jmptbl section,
+ vector section, nmi handler section, and warm handler section. */
+static void
+nds32_emit_isr_reset_content (void)
+{
+ unsigned int i;
+ unsigned int total_n_vectors;
+ const char *vs_str;
+ char reset_handler_name[100];
+ char section_name[100];
+ char symbol_name[100];
+
+ total_n_vectors = nds32_isr_vectors[0].total_n_vectors;
+ vs_str = (nds32_isr_vector_size == 4) ? "_4b" : "";
+
+ fprintf (asm_out_file, "\t! RESET HANDLER CONTENT - BEGIN !\n");
+
+ /* Create references in .rodata according to total number of vectors. */
+ fprintf (asm_out_file, "\t.section\t.rodata\n");
+ fprintf (asm_out_file, "\t.align\t2\n");
+
+ /* Emit jmptbl references. */
+ fprintf (asm_out_file, "\t ! references to jmptbl section entries\n");
+ for (i = 0; i < total_n_vectors; i++)
+ fprintf (asm_out_file, "\t.word\t_nds32_jmptbl_%02d\n", i);
+
+ /* Emit vector references. */
+ fprintf (asm_out_file, "\t ! references to vector section entries\n");
+ for (i = 0; i < total_n_vectors; i++)
+ fprintf (asm_out_file, "\t.word\t_nds32_vector_%02d%s\n", i, vs_str);
+
+ /* Emit jmptbl_00 section. */
+ snprintf (section_name, sizeof (section_name), ".nds32_jmptbl.00");
+ snprintf (symbol_name, sizeof (symbol_name), "_nds32_jmptbl_00");
+
+ fprintf (asm_out_file, "\t! ....................................\n");
+ nds32_emit_section_head_template (section_name, symbol_name, 2, true);
+ fprintf (asm_out_file, "\t.word\t%s\n",
+ nds32_isr_vectors[0].func_name);
+ nds32_emit_section_tail_template (symbol_name);
+
+ /* Emit vector_00 section. */
+ snprintf (section_name, sizeof (section_name), ".nds32_vector.00");
+ snprintf (symbol_name, sizeof (symbol_name), "_nds32_vector_00%s", vs_str);
+ snprintf (reset_handler_name, sizeof (reset_handler_name),
+ "_nds32_reset%s", vs_str);
+
+ fprintf (asm_out_file, "\t! ....................................\n");
+ nds32_emit_section_head_template (section_name, symbol_name,
+ floor_log2 (nds32_isr_vector_size), false);
+ fprintf (asm_out_file, "\tj\t%s ! jump to reset handler\n",
+ reset_handler_name);
+ nds32_emit_section_tail_template (symbol_name);
+
+ /* Emit nmi handler section. */
+ snprintf (section_name, sizeof (section_name), ".nds32_nmih");
+ snprintf (symbol_name, sizeof (symbol_name), "_nds32_nmih");
+
+ fprintf (asm_out_file, "\t! ....................................\n");
+ nds32_emit_section_head_template (section_name, symbol_name, 2, true);
+ fprintf (asm_out_file, "\t.word\t%s\n",
+ (strlen (nds32_isr_vectors[0].nmi_name) == 0)
+ ? "0"
+ : nds32_isr_vectors[0].nmi_name);
+ nds32_emit_section_tail_template (symbol_name);
+
+ /* Emit warm handler section. */
+ snprintf (section_name, sizeof (section_name), ".nds32_wrh");
+ snprintf (symbol_name, sizeof (symbol_name), "_nds32_wrh");
+
+ fprintf (asm_out_file, "\t! ....................................\n");
+ nds32_emit_section_head_template (section_name, symbol_name, 2, true);
+ fprintf (asm_out_file, "\t.word\t%s\n",
+ (strlen (nds32_isr_vectors[0].warm_name) == 0)
+ ? "0"
+ : nds32_isr_vectors[0].warm_name);
+ nds32_emit_section_tail_template (symbol_name);
+
+ fprintf (asm_out_file, "\t! RESET HANDLER CONTENT - END !\n");
+}
+
+/* Function for nds32_merge_decl_attributes() and nds32_insert_attributes()
+ to check if there are any conflict isr-specific attributes being set.
+ We need to check:
+ 1. Only 'save_all' or 'partial_save' in the attributes.
+ 2. Only 'nested', 'not_nested', or 'nested_ready' in the attributes.
+ 3. Only 'interrupt', 'exception', or 'reset' in the attributes. */
+static void
+nds32_check_isr_attrs_conflict (tree func_decl, tree func_attrs)
+{
+ int save_all_p, partial_save_p;
+ int nested_p, not_nested_p, nested_ready_p;
+ int intr_p, excp_p, reset_p;
+
+ /* Initialize variables. */
+ save_all_p = partial_save_p = 0;
+ nested_p = not_nested_p = nested_ready_p = 0;
+ intr_p = excp_p = reset_p = 0;
+
+ /* We must check at MOST one attribute to set save-reg. */
+ if (lookup_attribute ("save_all", func_attrs))
+ save_all_p = 1;
+ if (lookup_attribute ("partial_save", func_attrs))
+ partial_save_p = 1;
+
+ if ((save_all_p + partial_save_p) > 1)
+ error ("multiple save reg attributes to function %qD", func_decl);
+
+ /* We must check at MOST one attribute to set nested-type. */
+ if (lookup_attribute ("nested", func_attrs))
+ nested_p = 1;
+ if (lookup_attribute ("not_nested", func_attrs))
+ not_nested_p = 1;
+ if (lookup_attribute ("nested_ready", func_attrs))
+ nested_ready_p = 1;
+
+ if ((nested_p + not_nested_p + nested_ready_p) > 1)
+ error ("multiple nested types attributes to function %qD", func_decl);
+
+ /* We must check at MOST one attribute to
+ set interrupt/exception/reset. */
+ if (lookup_attribute ("interrupt", func_attrs))
+ intr_p = 1;
+ if (lookup_attribute ("exception", func_attrs))
+ excp_p = 1;
+ if (lookup_attribute ("reset", func_attrs))
+ reset_p = 1;
+
+ if ((intr_p + excp_p + reset_p) > 1)
+ error ("multiple interrupt attributes to function %qD", func_decl);
+}
+
+/* Function to construct isr vectors information array.
+ We DO NOT HAVE TO check if the attributes are valid
+ because those works are supposed to be done on
+ nds32_merge_decl_attributes() and nds32_insert_attributes(). */
+static void
+nds32_construct_isr_vectors_information (tree func_attrs,
+ const char *func_name)
+{
+ tree save_all, partial_save;
+ tree nested, not_nested, nested_ready;
+ tree intr, excp, reset;
+
+ save_all = lookup_attribute ("save_all", func_attrs);
+ partial_save = lookup_attribute ("partial_save", func_attrs);
+
+ nested = lookup_attribute ("nested", func_attrs);
+ not_nested = lookup_attribute ("not_nested", func_attrs);
+ nested_ready = lookup_attribute ("nested_ready", func_attrs);
+
+ intr = lookup_attribute ("interrupt", func_attrs);
+ excp = lookup_attribute ("exception", func_attrs);
+ reset = lookup_attribute ("reset", func_attrs);
+
+ /* If there is no interrupt/exception/reset, we can return immediately. */
+ if (!intr && !excp && !reset)
+ return;
+
+ /* If we are here, either we have interrupt/exception,
+ or reset attribute. */
+ if (intr || excp)
+ {
+ tree id_list;
+
+ /* Prepare id list so that we can traverse and set vector id. */
+ id_list = (intr) ? (TREE_VALUE (intr)) : (TREE_VALUE (excp));
+
+ while (id_list)
+ {
+ tree id;
+ int vector_id;
+ unsigned int vector_number_offset;
+
+ /* The way to handle interrupt or exception is the same,
+ we just need to take care of actual vector number.
+ For interrupt(0..63), the actual vector number is (9..72).
+ For exception(1..8), the actual vector number is (1..8). */
+ vector_number_offset = (intr) ? (9) : (0);
+
+ /* Pick up each vector id value. */
+ id = TREE_VALUE (id_list);
+ /* Add vector_number_offset to get actual vector number. */
+ vector_id = TREE_INT_CST_LOW (id) + vector_number_offset;
+
+ /* Enable corresponding vector and set function name. */
+ nds32_isr_vectors[vector_id].category = (intr)
+ ? (NDS32_ISR_INTERRUPT)
+ : (NDS32_ISR_EXCEPTION);
+ strcpy (nds32_isr_vectors[vector_id].func_name, func_name);
+
+ /* Set register saving scheme. */
+ if (save_all)
+ nds32_isr_vectors[vector_id].save_reg = NDS32_SAVE_ALL;
+ else if (partial_save)
+ nds32_isr_vectors[vector_id].save_reg = NDS32_PARTIAL_SAVE;
+
+ /* Set nested type. */
+ if (nested)
+ nds32_isr_vectors[vector_id].nested_type = NDS32_NESTED;
+ else if (not_nested)
+ nds32_isr_vectors[vector_id].nested_type = NDS32_NOT_NESTED;
+ else if (nested_ready)
+ nds32_isr_vectors[vector_id].nested_type = NDS32_NESTED_READY;
+
+ /* Advance to next id. */
+ id_list = TREE_CHAIN (id_list);
+ }
+ }
+ else
+ {
+ tree id_list;
+ tree id;
+ tree nmi, warm;
+
+ /* Deal with reset attribute. Its vector number is always 0. */
+ nds32_isr_vectors[0].category = NDS32_ISR_RESET;
+
+ /* Prepare id_list and identify id value so that
+ we can set total number of vectors. */
+ id_list = TREE_VALUE (reset);
+ id = TREE_VALUE (id_list);
+
+ /* The total vectors = interrupt + exception numbers + reset.
+ There are 8 exception and 1 reset in nds32 architecture. */
+ nds32_isr_vectors[0].total_n_vectors = TREE_INT_CST_LOW (id) + 8 + 1;
+ strcpy (nds32_isr_vectors[0].func_name, func_name);
+
+ /* Retrieve nmi and warm function. */
+ nmi = lookup_attribute ("nmi", func_attrs);
+ warm = lookup_attribute ("warm", func_attrs);
+
+ if (nmi != NULL_TREE)
+ {
+ tree nmi_func_list;
+ tree nmi_func;
+
+ nmi_func_list = TREE_VALUE (nmi);
+ nmi_func = TREE_VALUE (nmi_func_list);
+
+ /* Record nmi function name. */
+ strcpy (nds32_isr_vectors[0].nmi_name,
+ IDENTIFIER_POINTER (nmi_func));
+ }
+
+ if (warm != NULL_TREE)
+ {
+ tree warm_func_list;
+ tree warm_func;
+
+ warm_func_list = TREE_VALUE (warm);
+ warm_func = TREE_VALUE (warm_func_list);
+
+ /* Record warm function name. */
+ strcpy (nds32_isr_vectors[0].warm_name,
+ IDENTIFIER_POINTER (warm_func));
+ }
+ }
+}
+
+/* Function that may creates more instructions
+ for large value on adjusting stack pointer.
+
+ In nds32 target, 'addi' can be used for stack pointer
+ adjustment in prologue/epilogue stage.
+ However, sometimes there are too many local variables so that
+ the adjustment value is not able to be fit in the 'addi' instruction.
+ One solution is to move value into a register
+ and then use 'add' instruction.
+ In practice, we use TA_REGNUM ($r15) to accomplish this purpose.
+ Also, we need to return zero for sp adjustment so that
+ proglogue/epilogue knows there is no need to create 'addi' instruction. */
+static int
+nds32_force_addi_stack_int (int full_value)
+{
+ int adjust_value;
+
+ rtx tmp_reg;
+ rtx value_move_insn;
+ rtx sp_adjust_insn;
+
+ if (!satisfies_constraint_Is15 (GEN_INT (full_value)))
+ {
+ /* The value is not able to fit in single addi instruction.
+ Create more instructions of moving value into a register
+ and then add stack pointer with it. */
+
+ /* $r15 is going to be temporary register to hold the value. */
+ tmp_reg = gen_rtx_REG (SImode, TA_REGNUM);
+
+ /* Create one more instruction to move value
+ into the temporary register. */
+ value_move_insn = emit_move_insn (tmp_reg, GEN_INT (full_value));
+
+ /* At prologue, we need to tell GCC that this is frame related insn,
+ so that we can consider this instruction to output debug information.
+ If full_value is NEGATIVE, it means this function
+ is invoked by expand_prologue. */
+ if (full_value < 0)
+ RTX_FRAME_RELATED_P (value_move_insn) = 1;
+
+ /* Create new 'add' rtx. */
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ tmp_reg);
+ /* Emit rtx into insn list and receive its transformed insn rtx. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+
+ /* At prologue, we need to tell GCC that this is frame related insn,
+ so that we can consider this instruction to output debug information.
+ If full_value is NEGATIVE, it means this function
+ is invoked by expand_prologue. */
+ if (full_value < 0)
+ RTX_FRAME_RELATED_P (sp_adjust_insn) = 1;
+
+ /* We have used alternative way to adjust stack pointer value.
+ Return zero so that prologue/epilogue
+ will not generate other instructions. */
+ return 0;
+ }
+ else
+ {
+ /* The value is able to fit in addi instruction.
+ However, remember to make it to be positive value
+ because we want to return 'adjustment' result. */
+ adjust_value = (full_value < 0) ? (-full_value) : (full_value);
+
+ return adjust_value;
+ }
+}
+
+/* Return true if MODE/TYPE need double word alignment. */
+static bool
+nds32_needs_double_word_align (enum machine_mode mode, const_tree type)
+{
+ unsigned int align;
+
+ /* When 'type' is nonnull, there is no need to look at 'mode'. */
+ align = (type ? TYPE_ALIGN (type) : GET_MODE_ALIGNMENT (mode));
+
+ return (align > PARM_BOUNDARY);
+}
+
+/* Return true if FUNC is a naked function. */
+static bool nds32_naked_function_p (tree func)
+{
+ tree t;
+
+ if (TREE_CODE (func) != FUNCTION_DECL)
+ abort ();
+
+ t = lookup_attribute ("naked", DECL_ATTRIBUTES (func));
+
+ return (t != NULL_TREE);
+}
+
+/* Function that check if 'X' is a valid address register.
+ The variable 'STRICT' is very important to
+ make decision for register number.
+
+ STRICT : true
+ => We are in reload pass or after reload pass.
+ The register number should be strictly limited in general registers.
+
+ STRICT : false
+ => Before reload pass, we are free to use any register number. */
+static bool
+nds32_address_register_rtx_p (rtx x, bool strict)
+{
+ int regno;
+
+ if (GET_CODE (x) != REG)
+ return false;
+
+ regno = REGNO (x);
+
+ if (strict)
+ return REGNO_OK_FOR_BASE_P (regno);
+ else
+ return true;
+}
+
+/* Function that check if 'INDEX' is valid to be a index rtx for address.
+
+ OUTER_MODE : Machine mode of outer address rtx.
+ INDEX : Check if this rtx is valid to be a index for address.
+ STRICT : If it is true, we are in reload pass or after reload pass. */
+static bool
+nds32_legitimate_index_p (enum machine_mode outer_mode,
+ rtx index,
+ bool strict)
+{
+ int regno;
+ rtx op0;
+ rtx op1;
+
+ switch (GET_CODE (index))
+ {
+ case REG:
+ regno = REGNO (index);
+ /* If we are in reload pass or after reload pass,
+ we need to limit it to general register. */
+ if (strict)
+ return REGNO_OK_FOR_INDEX_P (regno);
+ else
+ return true;
+
+ case CONST_INT:
+ /* The alignment of the integer value is determined by 'outer_mode'. */
+ if (GET_MODE_SIZE (outer_mode) == 1)
+ {
+ /* Further check if the value is legal for the 'outer_mode'. */
+ if (!satisfies_constraint_Is15 (index))
+ return false;
+
+ /* Pass all test, the value is valid, return true. */
+ return true;
+ }
+ if (GET_MODE_SIZE (outer_mode) == 2
+ && NDS32_HALF_WORD_ALIGN_P (INTVAL (index)))
+ {
+ /* Further check if the value is legal for the 'outer_mode'. */
+ if (!satisfies_constraint_Is16 (index))
+ return false;
+
+ /* Pass all test, the value is valid, return true. */
+ return true;
+ }
+ if (GET_MODE_SIZE (outer_mode) == 4
+ && NDS32_SINGLE_WORD_ALIGN_P (INTVAL (index)))
+ {
+ /* Further check if the value is legal for the 'outer_mode'. */
+ if (!satisfies_constraint_Is17 (index))
+ return false;
+
+ /* Pass all test, the value is valid, return true. */
+ return true;
+ }
+ if (GET_MODE_SIZE (outer_mode) == 8
+ && NDS32_SINGLE_WORD_ALIGN_P (INTVAL (index)))
+ {
+ /* Further check if the value is legal for the 'outer_mode'. */
+ if (!satisfies_constraint_Is17 (gen_int_mode (INTVAL (index) + 4,
+ SImode)))
+ return false;
+
+ /* Pass all test, the value is valid, return true. */
+ return true;
+ }
+
+ return false;
+
+ case MULT:
+ op0 = XEXP (index, 0);
+ op1 = XEXP (index, 1);
+
+ if (REG_P (op0) && CONST_INT_P (op1))
+ {
+ int multiplier;
+ multiplier = INTVAL (op1);
+
+ /* We only allow (mult reg const_int_1)
+ or (mult reg const_int_2) or (mult reg const_int_4). */
+ if (multiplier != 1 && multiplier != 2 && multiplier != 4)
+ return false;
+
+ regno = REGNO (op0);
+ /* Limit it in general registers if we are
+ in reload pass or after reload pass. */
+ if(strict)
+ return REGNO_OK_FOR_INDEX_P (regno);
+ else
+ return true;
+ }
+
+ return false;
+
+ case ASHIFT:
+ op0 = XEXP (index, 0);
+ op1 = XEXP (index, 1);
+
+ if (REG_P (op0) && CONST_INT_P (op1))
+ {
+ int sv;
+ /* op1 is already the sv value for use to do left shift. */
+ sv = INTVAL (op1);
+
+ /* We only allow (ashift reg const_int_0)
+ or (ashift reg const_int_1) or (ashift reg const_int_2). */
+ if (sv != 0 && sv != 1 && sv !=2)
+ return false;
+
+ regno = REGNO (op0);
+ /* Limit it in general registers if we are
+ in reload pass or after reload pass. */
+ if(strict)
+ return REGNO_OK_FOR_INDEX_P (regno);
+ else
+ return true;
+ }
+
+ return false;
+
+ default:
+ return false;
+ }
+}
+
+/* Function to expand builtin function for
+ '[(unspec_volatile [(reg)])]'. */
+static rtx
+nds32_expand_builtin_null_ftype_reg (enum insn_code icode,
+ tree exp, rtx target)
+{
+ /* Mapping:
+ ops[0] <--> value0 <--> arg0 */
+ struct expand_operand ops[1];
+ tree arg0;
+ rtx value0;
+
+ /* Grab the incoming arguments and extract its rtx. */
+ arg0 = CALL_EXPR_ARG (exp, 0);
+ value0 = expand_normal (arg0);
+
+ /* Create operands. */
+ create_input_operand (&ops[0], value0, TYPE_MODE (TREE_TYPE (arg0)));
+
+ /* Emit new instruction. */
+ if (!maybe_expand_insn (icode, 1, ops))
+ error ("invalid argument to built-in function");
+
+ return target;
+}
+
+/* Function to expand builtin function for
+ '[(set (reg) (unspec_volatile [(imm)]))]'. */
+static rtx
+nds32_expand_builtin_reg_ftype_imm (enum insn_code icode,
+ tree exp, rtx target)
+{
+ /* Mapping:
+ ops[0] <--> target <--> exp
+ ops[1] <--> value0 <--> arg0 */
+ struct expand_operand ops[2];
+ tree arg0;
+ rtx value0;
+
+ /* Grab the incoming arguments and extract its rtx. */
+ arg0 = CALL_EXPR_ARG (exp, 0);
+ value0 = expand_normal (arg0);
+
+ /* Create operands. */
+ create_output_operand (&ops[0], target, TYPE_MODE (TREE_TYPE (exp)));
+ create_input_operand (&ops[1], value0, TYPE_MODE (TREE_TYPE (arg0)));
+
+ /* Emit new instruction. */
+ if (!maybe_expand_insn (icode, 2, ops))
+ error ("invalid argument to built-in function");
+
+ return target;
+}
+
+/* Function to expand builtin function for
+ '[(unspec_volatile [(reg) (imm)])]' pattern. */
+static rtx
+nds32_expand_builtin_null_ftype_reg_imm (enum insn_code icode,
+ tree exp, rtx target)
+{
+ /* Mapping:
+ ops[0] <--> value0 <--> arg0
+ ops[1] <--> value1 <--> arg1 */
+ struct expand_operand ops[2];
+ tree arg0, arg1;
+ rtx value0, value1;
+
+ /* Grab the incoming arguments and extract its rtx. */
+ arg0 = CALL_EXPR_ARG (exp, 0);
+ arg1 = CALL_EXPR_ARG (exp, 1);
+ value0 = expand_normal (arg0);
+ value1 = expand_normal (arg1);
+
+ /* Create operands. */
+ create_input_operand (&ops[0], value0, TYPE_MODE (TREE_TYPE (arg0)));
+ create_input_operand (&ops[1], value1, TYPE_MODE (TREE_TYPE (arg1)));
+
+ /* Emit new instruction. */
+ if (!maybe_expand_insn (icode, 2, ops))
+ error ("invalid argument to built-in function");
+
+ return target;
+}
+
+/* A helper function to return character based on byte size. */
+static char
+nds32_byte_to_size (int byte)
+{
+ switch (byte)
+ {
+ case 4:
+ return 'w';
+ case 2:
+ return 'h';
+ case 1:
+ return 'b';
+ default:
+ /* Normally it should not be here. */
+ gcc_unreachable ();
+ }
+}
+
+/* A helper function to check if this function should contain prologue. */
+static int
+nds32_have_prologue_p (void)
+{
+ int i;
+
+ for (i = 0; i < 28; i++)
+ if (NDS32_REQUIRED_CALLEE_SAVED_P (i))
+ return 1;
+
+ return (flag_pic
+ || NDS32_REQUIRED_CALLEE_SAVED_P (FP_REGNUM)
+ || NDS32_REQUIRED_CALLEE_SAVED_P (LP_REGNUM));
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* PART 3: Implement target hook stuff definitions. */
+
+/* Register Classes. */
+
+static unsigned char
+nds32_class_max_nregs (reg_class_t rclass ATTRIBUTE_UNUSED,
+ enum machine_mode mode)
+{
+ /* Return the maximum number of consecutive registers
+ needed to represent "mode" in a register of "rclass". */
+ return ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD);
+}
+
+static int
+nds32_register_priority (int hard_regno)
+{
+ /* Encourage to use r0-r7 for LRA when optimize for size. */
+ if (optimize_size && hard_regno < 8)
+ return 4;
+ return 3;
+}
+
+
+/* Stack Layout and Calling Conventions. */
+
+/* There are three kinds of pointer concepts using in GCC compiler:
+
+ frame pointer: A pointer to the first location of local variables.
+ stack pointer: A pointer to the top of a stack frame.
+ argument pointer: A pointer to the incoming arguments.
+
+ In nds32 target calling convention, we are using 8-byte alignment.
+ Besides, we would like to have each stack frame of a function includes:
+
+ [Block A]
+ 1. previous hard frame pointer
+ 2. return address
+ 3. callee-saved registers
+ 4. <padding bytes> (we will calculte in nds32_compute_stack_frame()
+ and save it at
+ cfun->machine->callee_saved_area_padding_bytes)
+
+ [Block B]
+ 1. local variables
+ 2. spilling location
+ 3. <padding bytes> (it will be calculated by GCC itself)
+ 4. incoming arguments
+ 5. <padding bytes> (it will be calculated by GCC itself)
+
+ [Block C]
+ 1. <padding bytes> (it will be calculated by GCC itself)
+ 2. outgoing arguments
+
+ We 'wrap' these blocks together with
+ hard frame pointer ($r28) and stack pointer ($r31).
+ By applying the basic frame/stack/argument pointers concept,
+ the layout of a stack frame shoule be like this:
+
+ | |
+ old stack pointer -> ----
+ | | \
+ | | saved arguments for
+ | | vararg functions
+ | | /
+ hard frame pointer -> --
+ & argument pointer | | \
+ | | previous hardware frame pointer
+ | | return address
+ | | callee-saved registers
+ | | /
+ frame pointer -> --
+ | | \
+ | | local variables
+ | | and incoming arguments
+ | | /
+ --
+ | | \
+ | | outgoing
+ | | arguments
+ | | /
+ stack pointer -> ----
+
+ $SFP and $AP are used to represent frame pointer and arguments pointer,
+ which will be both eliminated as hard frame pointer. */
+
+/* Eliminating Frame Pointer and Arg Pointer. */
+
+static bool nds32_can_eliminate (const int from_reg, const int to_reg)
+{
+ if (from_reg == ARG_POINTER_REGNUM && to_reg == STACK_POINTER_REGNUM)
+ return true;
+
+ if (from_reg == ARG_POINTER_REGNUM && to_reg == HARD_FRAME_POINTER_REGNUM)
+ return true;
+
+ if (from_reg == FRAME_POINTER_REGNUM && to_reg == STACK_POINTER_REGNUM)
+ return true;
+
+ if (from_reg == FRAME_POINTER_REGNUM && to_reg == HARD_FRAME_POINTER_REGNUM)
+ return true;
+
+ return false;
+}
+
+/* Passing Arguments in Registers. */
+
+static rtx
+nds32_function_arg (cumulative_args_t ca, enum machine_mode mode,
+ const_tree type, bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (ca);
+
+ /* The last time this hook is called,
+ it is called with MODE == VOIDmode. */
+ if (mode == VOIDmode)
+ return NULL_RTX;
+
+ /* For nameless arguments, they are passed on the stack. */
+ if (!named)
+ return NULL_RTX;
+
+ /* If there are still registers available, return it. */
+ if (NDS32_ARG_PASS_IN_REG_P (cum->reg_offset, mode, type))
+ {
+ /* Pick up the next available register number. */
+ return gen_rtx_REG (mode,
+ NDS32_AVAILABLE_REGNUM_FOR_ARG (cum->reg_offset,
+ mode,
+ type));
+ }
+ else
+ {
+ /* No register available, return NULL_RTX.
+ The compiler will use stack to pass argument instead. */
+ return NULL_RTX;
+ }
+}
+
+static void
+nds32_function_arg_advance (cumulative_args_t ca, enum machine_mode mode,
+ const_tree type, bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (ca);
+
+ /* Advance next register for use.
+ Only named argument could be advanced. */
+ if (named)
+ {
+ cum->reg_offset
+ = NDS32_AVAILABLE_REGNUM_FOR_ARG (cum->reg_offset, mode, type)
+ - NDS32_GPR_ARG_FIRST_REGNUM
+ + NDS32_NEED_N_REGS_FOR_ARG (mode, type);
+ }
+}
+
+static unsigned int
+nds32_function_arg_boundary (enum machine_mode mode, const_tree type)
+{
+ return (nds32_needs_double_word_align (mode, type)
+ ? NDS32_DOUBLE_WORD_ALIGNMENT
+ : PARM_BOUNDARY);
+}
+
+/* How Scalar Function Values Are Returned. */
+
+static rtx
+nds32_function_value (const_tree ret_type,
+ const_tree fn_decl_or_type ATTRIBUTE_UNUSED,
+ bool outgoing ATTRIBUTE_UNUSED)
+{
+ enum machine_mode mode;
+ int unsignedp;
+
+ mode = TYPE_MODE (ret_type);
+ unsignedp = TYPE_UNSIGNED (ret_type);
+
+ mode = promote_mode (ret_type, mode, &unsignedp);
+
+ return gen_rtx_REG (mode, NDS32_GPR_RET_FIRST_REGNUM);
+}
+
+static rtx
+nds32_libcall_value (enum machine_mode mode,
+ const_rtx fun ATTRIBUTE_UNUSED)
+{
+ return gen_rtx_REG (mode, NDS32_GPR_RET_FIRST_REGNUM);
+}
+
+static bool
+nds32_function_value_regno_p (const unsigned int regno)
+{
+ return (regno == NDS32_GPR_RET_FIRST_REGNUM);
+}
+
+/* Function Entry and Exit. */
+
+/* The content produced from this function
+ will be placed before prologue body. */
+static void
+nds32_asm_function_prologue (FILE *file,
+ HOST_WIDE_INT size ATTRIBUTE_UNUSED)
+{
+ int r;
+ const char *func_name;
+ tree attrs;
+ tree name;
+
+ /* All stack frame information is supposed to be
+ already computed when expanding prologue.
+ The result is in cfun->machine.
+ DO NOT call nds32_compute_stack_frame() here
+ because it may corrupt the essential information. */
+
+ fprintf (file, "\t! BEGIN PROLOGUE\n");
+ fprintf (file, "\t! fp needed: %d\n", frame_pointer_needed);
+ fprintf (file, "\t! pretend_args: %d\n", cfun->machine->va_args_size);
+ fprintf (file, "\t! local_size: %d\n", cfun->machine->local_size);
+ fprintf (file, "\t! out_args_size: %d\n", cfun->machine->out_args_size);
+
+ /* Use df_regs_ever_live_p() to detect if the register
+ is ever used in the current function. */
+ fprintf (file, "\t! registers ever_live: ");
+ for (r = 0; r < 32; r++)
+ {
+ if (df_regs_ever_live_p (r))
+ fprintf (file, "%s, ", reg_names[r]);
+ }
+ fputc ('\n', file);
+
+ /* Display the attributes of this function. */
+ fprintf (file, "\t! function attributes: ");
+ /* GCC build attributes list with reverse order,
+ so we use nreverse() to make it looks like
+ the order that user specifies. */
+ attrs = nreverse (DECL_ATTRIBUTES (current_function_decl));
+
+ /* If there is no any attribute, print out "None". */
+ if (!attrs)
+ fprintf (file, "None");
+
+ /* If there are some attributes, try if we need to
+ construct isr vector information. */
+ func_name = IDENTIFIER_POINTER (DECL_NAME (current_function_decl));
+ nds32_construct_isr_vectors_information (attrs, func_name);
+
+ /* Display all attributes of this function. */
+ while (attrs)
+ {
+ name = TREE_PURPOSE (attrs);
+ fprintf (file, "%s ", IDENTIFIER_POINTER (name));
+
+ /* Pick up the next attribute. */
+ attrs = TREE_CHAIN (attrs);
+ }
+ fputc ('\n', file);
+}
+
+/* After rtl prologue has been expanded, this function is used. */
+static void
+nds32_asm_function_end_prologue (FILE *file)
+{
+ fprintf (file, "\t! END PROLOGUE\n");
+
+ /* If frame pointer is NOT needed and -mfp-as-gp is issued,
+ we can generate special directive: ".omit_fp_begin"
+ to guide linker doing fp-as-gp optimization.
+ However, for a naked function, which means
+ it should not have prologue/epilogue,
+ using fp-as-gp still requires saving $fp by push/pop behavior and
+ there is no benefit to use fp-as-gp on such small function.
+ So we need to make sure this function is NOT naked as well. */
+ if (!frame_pointer_needed
+ && !cfun->machine->naked_p
+ && cfun->machine->fp_as_gp_p)
+ {
+ fprintf (file, "\t! ----------------------------------------\n");
+ fprintf (file, "\t! Guide linker to do "
+ "link time optimization: fp-as-gp\n");
+ fprintf (file, "\t! We add one more instruction to "
+ "initialize $fp near to $gp location.\n");
+ fprintf (file, "\t! If linker fails to use fp-as-gp transformation,\n");
+ fprintf (file, "\t! this extra instruction should be "
+ "eliminated at link stage.\n");
+ fprintf (file, "\t.omit_fp_begin\n");
+ fprintf (file, "\tla\t$fp,_FP_BASE_\n");
+ fprintf (file, "\t! ----------------------------------------\n");
+ }
+}
+
+/* Before rtl epilogue has been expanded, this function is used. */
+static void
+nds32_asm_function_begin_epilogue (FILE *file)
+{
+ /* If frame pointer is NOT needed and -mfp-as-gp is issued,
+ we can generate special directive: ".omit_fp_end"
+ to claim fp-as-gp optimization range.
+ However, for a naked function,
+ which means it should not have prologue/epilogue,
+ using fp-as-gp still requires saving $fp by push/pop behavior and
+ there is no benefit to use fp-as-gp on such small function.
+ So we need to make sure this function is NOT naked as well. */
+ if (!frame_pointer_needed
+ && !cfun->machine->naked_p
+ && cfun->machine->fp_as_gp_p)
+ {
+ fprintf (file, "\t! ----------------------------------------\n");
+ fprintf (file, "\t! Claim the range of fp-as-gp "
+ "link time optimization\n");
+ fprintf (file, "\t.omit_fp_end\n");
+ fprintf (file, "\t! ----------------------------------------\n");
+ }
+
+ fprintf (file, "\t! BEGIN EPILOGUE\n");
+}
+
+/* The content produced from this function
+ will be placed after epilogue body. */
+static void
+nds32_asm_function_epilogue (FILE *file,
+ HOST_WIDE_INT size ATTRIBUTE_UNUSED)
+{
+ fprintf (file, "\t! END EPILOGUE\n");
+}
+
+static void
+nds32_asm_output_mi_thunk (FILE *file, tree thunk ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT delta,
+ HOST_WIDE_INT vcall_offset ATTRIBUTE_UNUSED,
+ tree function)
+{
+ int this_regno;
+
+ /* Make sure unwind info is emitted for the thunk if needed. */
+ final_start_function (emit_barrier (), file, 1);
+
+ this_regno = (aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function)
+ ? 1
+ : 0);
+
+ if (delta != 0)
+ {
+ if (satisfies_constraint_Is15 (GEN_INT (delta)))
+ {
+ fprintf (file, "\taddi\t$r%d, $r%d, %ld\n",
+ this_regno, this_regno, delta);
+ }
+ else if (satisfies_constraint_Is20 (GEN_INT (delta)))
+ {
+ fprintf (file, "\tmovi\t$ta, %ld\n", delta);
+ fprintf (file, "\tadd\t$r%d, $r%d, $ta\n", this_regno, this_regno);
+ }
+ else
+ {
+ fprintf (file, "\tsethi\t$ta, hi20(%ld)\n", delta);
+ fprintf (file, "\tori\t$ta, $ta, lo12(%ld)\n", delta);
+ fprintf (file, "\tadd\t$r%d, $r%d, $ta\n", this_regno, this_regno);
+ }
+ }
+
+ fprintf (file, "\tb\t");
+ assemble_name (file, XSTR (XEXP (DECL_RTL (function), 0), 0));
+ fprintf (file, "\n");
+
+ final_end_function ();
+}
+
+/* Permitting tail calls. */
+
+/* Determine whether we need to enable warning for function return check. */
+static bool
+nds32_warn_func_return (tree decl)
+{
+/* Naked functions are implemented entirely in assembly, including the
+ return sequence, so suppress warnings about this. */
+ return !nds32_naked_function_p (decl);
+}
+
+
+/* Implementing the Varargs Macros. */
+
+static bool
+nds32_strict_argument_naming (cumulative_args_t ca ATTRIBUTE_UNUSED)
+{
+ /* Return true so that all the named arguments for FUNCTION_ARG have named=1.
+ If return false, for the variadic function, all named arguments EXCEPT
+ the last are treated as named. */
+ return true;
+}
+
+
+/* Trampolines for Nested Functions. */
+
+static void
+nds32_asm_trampoline_template (FILE *f)
+{
+ if (TARGET_REDUCED_REGS)
+ {
+ /* Trampoline is not supported on reduced-set registers yet. */
+ sorry ("a nested function is not supported for reduced registers");
+ }
+ else
+ {
+ asm_fprintf (f, "\t! Trampoline code template\n");
+ asm_fprintf (f, "\t! This code fragment will be copied "
+ "into stack on demand\n");
+
+ asm_fprintf (f, "\tmfusr\t$r16,$pc\n");
+ asm_fprintf (f, "\tlwi\t$r15,[$r16 + 20] "
+ "! load nested function address\n");
+ asm_fprintf (f, "\tlwi\t$r16,[$r16 + 16] "
+ "! load chain_value\n");
+ asm_fprintf (f, "\tjr\t$r15\n");
+ }
+
+ /* Preserve space ($pc + 16) for saving chain_value,
+ nds32_trampoline_init will fill the value in this slot. */
+ asm_fprintf (f, "\t! space for saving chain_value\n");
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx);
+
+ /* Preserve space ($pc + 20) for saving nested function address,
+ nds32_trampoline_init will fill the value in this slot. */
+ asm_fprintf (f, "\t! space for saving nested function address\n");
+ assemble_aligned_integer (UNITS_PER_WORD, const0_rtx);
+}
+
+/* Emit RTL insns to initialize the variable parts of a trampoline. */
+static void
+nds32_trampoline_init (rtx m_tramp, tree fndecl, rtx chain_value)
+{
+ int i;
+
+ /* Nested function address. */
+ rtx fnaddr;
+ /* The memory rtx that is going to
+ be filled with chain_value. */
+ rtx chain_value_mem;
+ /* The memory rtx that is going to
+ be filled with nested function address. */
+ rtx nested_func_mem;
+
+ /* Start address of trampoline code in stack, for doing cache sync. */
+ rtx sync_cache_addr;
+ /* Temporary register for sync instruction. */
+ rtx tmp_reg;
+ /* Instruction-cache sync instruction,
+ requesting an argument as starting address. */
+ rtx isync_insn;
+ /* For convenience reason of doing comparison. */
+ int tramp_align_in_bytes;
+
+ /* Trampoline is not supported on reduced-set registers yet. */
+ if (TARGET_REDUCED_REGS)
+ sorry ("a nested function is not supported for reduced registers");
+
+ /* STEP 1: Copy trampoline code template into stack,
+ fill up essential data into stack. */
+
+ /* Extract nested function address rtx. */
+ fnaddr = XEXP (DECL_RTL (fndecl), 0);
+
+ /* m_tramp is memory rtx that is going to be filled with trampoline code.
+ We have nds32_asm_trampoline_template() to emit template pattern. */
+ emit_block_move (m_tramp, assemble_trampoline_template (),
+ GEN_INT (TRAMPOLINE_SIZE), BLOCK_OP_NORMAL);
+
+ /* After copying trampoline code into stack,
+ fill chain_value into stack. */
+ chain_value_mem = adjust_address (m_tramp, SImode, 16);
+ emit_move_insn (chain_value_mem, chain_value);
+ /* After copying trampoline code int stack,
+ fill nested function address into stack. */
+ nested_func_mem = adjust_address (m_tramp, SImode, 20);
+ emit_move_insn (nested_func_mem, fnaddr);
+
+ /* STEP 2: Sync instruction-cache. */
+
+ /* We have successfully filled trampoline code into stack.
+ However, in order to execute code in stack correctly,
+ we must sync instruction cache. */
+ sync_cache_addr = XEXP (m_tramp, 0);
+ tmp_reg = gen_reg_rtx (SImode);
+ isync_insn = gen_unspec_volatile_isync (tmp_reg);
+
+ /* Because nds32_cache_block_size is in bytes,
+ we get trampoline alignment in bytes for convenient comparison. */
+ tramp_align_in_bytes = TRAMPOLINE_ALIGNMENT / BITS_PER_UNIT;
+
+ if (tramp_align_in_bytes >= nds32_cache_block_size
+ && (tramp_align_in_bytes % nds32_cache_block_size) == 0)
+ {
+ /* Under this condition, the starting address of trampoline
+ must be aligned to the starting address of each cache block
+ and we do not have to worry about cross-boundary issue. */
+ for (i = 0;
+ i < (TRAMPOLINE_SIZE + nds32_cache_block_size - 1)
+ / nds32_cache_block_size;
+ i++)
+ {
+ emit_move_insn (tmp_reg,
+ plus_constant (Pmode, sync_cache_addr,
+ nds32_cache_block_size * i));
+ emit_insn (isync_insn);
+ }
+ }
+ else if (TRAMPOLINE_SIZE > nds32_cache_block_size)
+ {
+ /* The starting address of trampoline code
+ may not be aligned to the cache block,
+ so the trampoline code may be across two cache block.
+ We need to sync the last element, which is 4-byte size,
+ of trampoline template. */
+ for (i = 0;
+ i < (TRAMPOLINE_SIZE + nds32_cache_block_size - 1)
+ / nds32_cache_block_size;
+ i++)
+ {
+ emit_move_insn (tmp_reg,
+ plus_constant (Pmode, sync_cache_addr,
+ nds32_cache_block_size * i));
+ emit_insn (isync_insn);
+ }
+
+ /* The last element of trampoline template is 4-byte size. */
+ emit_move_insn (tmp_reg,
+ plus_constant (Pmode, sync_cache_addr,
+ TRAMPOLINE_SIZE - 4));
+ emit_insn (isync_insn);
+ }
+ else
+ {
+ /* This is the simplest case.
+ Because TRAMPOLINE_SIZE is less than or
+ equal to nds32_cache_block_size,
+ we can just sync start address and
+ the last element of trampoline code. */
+
+ /* Sync starting address of tampoline code. */
+ emit_move_insn (tmp_reg, sync_cache_addr);
+ emit_insn (isync_insn);
+ /* Sync the last element, which is 4-byte size,
+ of trampoline template. */
+ emit_move_insn (tmp_reg,
+ plus_constant (Pmode, sync_cache_addr,
+ TRAMPOLINE_SIZE - 4));
+ emit_insn (isync_insn);
+ }
+
+ /* Set instruction serialization barrier
+ to guarantee the correct operations. */
+ emit_insn (gen_unspec_volatile_isb ());
+}
+
+
+/* Addressing Modes. */
+
+static bool
+nds32_legitimate_address_p (enum machine_mode mode, rtx x, bool strict)
+{
+ /* For (mem:DI addr) or (mem:DF addr) case,
+ we only allow 'addr' to be [reg], [symbol_ref],
+ [const], or [reg + const_int] pattern. */
+ if (mode == DImode || mode == DFmode)
+ {
+ /* Allow [Reg + const_int] addressing mode. */
+ if (GET_CODE (x) == PLUS)
+ {
+ if (nds32_address_register_rtx_p (XEXP (x, 0), strict)
+ && nds32_legitimate_index_p (mode, XEXP (x, 1), strict)
+ && CONST_INT_P (XEXP (x, 1)))
+ return true;
+
+ else if (nds32_address_register_rtx_p (XEXP (x, 1), strict)
+ && nds32_legitimate_index_p (mode, XEXP (x, 0), strict)
+ && CONST_INT_P (XEXP (x, 0)))
+ return true;
+ }
+
+ /* Now check [reg], [symbol_ref], and [const]. */
+ if (GET_CODE (x) != REG
+ && GET_CODE (x) != SYMBOL_REF
+ && GET_CODE (x) != CONST)
+ return false;
+ }
+
+ /* Check if 'x' is a valid address. */
+ switch (GET_CODE (x))
+ {
+ case REG:
+ /* (mem (reg A)) => [Ra] */
+ return nds32_address_register_rtx_p (x, strict);
+
+ case SYMBOL_REF:
+
+ if (!TARGET_GP_DIRECT
+ && (reload_completed
+ || reload_in_progress
+ || lra_in_progress))
+ return false;
+
+ /* (mem (symbol_ref A)) => [symbol_ref] */
+ return !currently_expanding_to_rtl;
+
+ case CONST:
+
+ if (!TARGET_GP_DIRECT
+ && (reload_completed
+ || reload_in_progress
+ || lra_in_progress))
+ return false;
+
+ /* (mem (const (...)))
+ => [ + const_addr ], where const_addr = symbol_ref + const_int */
+ if (GET_CODE (XEXP (x, 0)) == PLUS)
+ {
+ rtx plus_op = XEXP (x, 0);
+
+ rtx op0 = XEXP (plus_op, 0);
+ rtx op1 = XEXP (plus_op, 1);
+
+ if (GET_CODE (op0) == SYMBOL_REF && CONST_INT_P (op1))
+ return true;
+ else
+ return false;
+ }
+
+ return false;
+
+ case POST_MODIFY:
+ /* (mem (post_modify (reg) (plus (reg) (reg))))
+ => [Ra], Rb */
+ /* (mem (post_modify (reg) (plus (reg) (const_int))))
+ => [Ra], const_int */
+ if (GET_CODE (XEXP (x, 0)) == REG
+ && GET_CODE (XEXP (x, 1)) == PLUS)
+ {
+ rtx plus_op = XEXP (x, 1);
+
+ rtx op0 = XEXP (plus_op, 0);
+ rtx op1 = XEXP (plus_op, 1);
+
+ if (nds32_address_register_rtx_p (op0, strict)
+ && nds32_legitimate_index_p (mode, op1, strict))
+ return true;
+ else
+ return false;
+ }
+
+ return false;
+
+ case POST_INC:
+ case POST_DEC:
+ /* (mem (post_inc reg)) => [Ra], 1/2/4 */
+ /* (mem (post_dec reg)) => [Ra], -1/-2/-4 */
+ /* The 1/2/4 or -1/-2/-4 have been displayed in nds32.md.
+ We only need to deal with register Ra. */
+ if (nds32_address_register_rtx_p (XEXP (x, 0), strict))
+ return true;
+ else
+ return false;
+
+ case PLUS:
+ /* (mem (plus reg const_int))
+ => [Ra + imm] */
+ /* (mem (plus reg reg))
+ => [Ra + Rb] */
+ /* (mem (plus (mult reg const_int) reg))
+ => [Ra + Rb << sv] */
+ if (nds32_address_register_rtx_p (XEXP (x, 0), strict)
+ && nds32_legitimate_index_p (mode, XEXP (x, 1), strict))
+ return true;
+ else if (nds32_address_register_rtx_p (XEXP (x, 1), strict)
+ && nds32_legitimate_index_p (mode, XEXP (x, 0), strict))
+ return true;
+ else
+ return false;
+
+ case LO_SUM:
+ if (!TARGET_GP_DIRECT)
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+
+/* Describing Relative Costs of Operations. */
+
+static int nds32_register_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED,
+ reg_class_t from,
+ reg_class_t to)
+{
+ if (from == HIGH_REGS || to == HIGH_REGS)
+ return 6;
+
+ return 2;
+}
+
+static int nds32_memory_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED,
+ reg_class_t rclass ATTRIBUTE_UNUSED,
+ bool in ATTRIBUTE_UNUSED)
+{
+ return 8;
+}
+
+/* This target hook describes the relative costs of RTL expressions.
+ Return 'true' when all subexpressions of x have been processed.
+ Return 'false' to sum the costs of sub-rtx, plus cost of this operation.
+ Refer to gcc/rtlanal.c for more information. */
+static bool
+nds32_rtx_costs (rtx x,
+ int code,
+ int outer_code,
+ int opno ATTRIBUTE_UNUSED,
+ int *total,
+ bool speed)
+{
+ /* According to 'speed', goto suitable cost model section. */
+ if (speed)
+ goto performance_cost;
+ else
+ goto size_cost;
+
+
+performance_cost:
+ /* This is section for performance cost model. */
+
+ /* In gcc/rtl.h, the default value of COSTS_N_INSNS(N) is N*4.
+ We treat it as 4-cycle cost for each instruction
+ under performance consideration. */
+ switch (code)
+ {
+ case SET:
+ /* For 'SET' rtx, we need to return false
+ so that it can recursively calculate costs. */
+ return false;
+
+ case USE:
+ /* Used in combine.c as a marker. */
+ *total = 0;
+ break;
+
+ case MULT:
+ *total = COSTS_N_INSNS (5);
+ break;
+
+ case DIV:
+ case UDIV:
+ case MOD:
+ case UMOD:
+ *total = COSTS_N_INSNS (7);
+ break;
+
+ default:
+ *total = COSTS_N_INSNS (1);
+ break;
+ }
+
+ return true;
+
+
+size_cost:
+ /* This is section for size cost model. */
+
+ /* In gcc/rtl.h, the default value of COSTS_N_INSNS(N) is N*4.
+ We treat it as 4-byte cost for each instruction
+ under code size consideration. */
+ switch (code)
+ {
+ case SET:
+ /* For 'SET' rtx, we need to return false
+ so that it can recursively calculate costs. */
+ return false;
+
+ case USE:
+ /* Used in combine.c as a marker. */
+ *total = 0;
+ break;
+
+ case CONST_INT:
+ /* All instructions involving constant operation
+ need to be considered for cost evaluation. */
+ if (outer_code == SET)
+ {
+ /* (set X imm5s), use movi55, 2-byte cost.
+ (set X imm20s), use movi, 4-byte cost.
+ (set X BIG_INT), use sethi/ori, 8-byte cost. */
+ if (satisfies_constraint_Is05 (x))
+ *total = COSTS_N_INSNS (1) - 2;
+ else if (satisfies_constraint_Is20 (x))
+ *total = COSTS_N_INSNS (1);
+ else
+ *total = COSTS_N_INSNS (2);
+ }
+ else if (outer_code == PLUS || outer_code == MINUS)
+ {
+ /* Possible addi333/subi333 or subi45/addi45, 2-byte cost.
+ General case, cost 1 instruction with 4-byte. */
+ if (satisfies_constraint_Iu05 (x))
+ *total = COSTS_N_INSNS (1) - 2;
+ else
+ *total = COSTS_N_INSNS (1);
+ }
+ else if (outer_code == ASHIFT)
+ {
+ /* Possible slli333, 2-byte cost.
+ General case, cost 1 instruction with 4-byte. */
+ if (satisfies_constraint_Iu03 (x))
+ *total = COSTS_N_INSNS (1) - 2;
+ else
+ *total = COSTS_N_INSNS (1);
+ }
+ else if (outer_code == ASHIFTRT || outer_code == LSHIFTRT)
+ {
+ /* Possible srai45 or srli45, 2-byte cost.
+ General case, cost 1 instruction with 4-byte. */
+ if (satisfies_constraint_Iu05 (x))
+ *total = COSTS_N_INSNS (1) - 2;
+ else
+ *total = COSTS_N_INSNS (1);
+ }
+ else
+ {
+ /* For other cases, simply set it 4-byte cost. */
+ *total = COSTS_N_INSNS (1);
+ }
+ break;
+
+ case CONST_DOUBLE:
+ /* It requires high part and low part processing, set it 8-byte cost. */
+ *total = COSTS_N_INSNS (2);
+ break;
+
+ default:
+ /* For other cases, generally we set it 4-byte cost
+ and stop resurively traversing. */
+ *total = COSTS_N_INSNS (1);
+ break;
+ }
+
+ return true;
+}
+
+static int nds32_address_cost (rtx address,
+ enum machine_mode mode ATTRIBUTE_UNUSED,
+ addr_space_t as ATTRIBUTE_UNUSED,
+ bool speed)
+{
+ rtx plus0, plus1;
+ enum rtx_code code;
+
+ code = GET_CODE (address);
+
+ /* According to 'speed', goto suitable cost model section. */
+ if (speed)
+ goto performance_cost;
+ else
+ goto size_cost;
+
+performance_cost:
+ /* This is section for performance cost model. */
+
+ /* FALLTHRU, currently we use same cost model as size_cost. */
+
+size_cost:
+ /* This is section for size cost model. */
+
+ switch (code)
+ {
+ case POST_MODIFY:
+ case POST_INC:
+ case POST_DEC:
+ /* We encourage that rtx contains
+ POST_MODIFY/POST_INC/POST_DEC behavior. */
+ return 0;
+
+ case SYMBOL_REF:
+ /* We can have gp-relative load/store for symbol_ref.
+ Have it 4-byte cost. */
+ return COSTS_N_INSNS (1);
+
+ case CONST:
+ /* It is supposed to be the pattern (const (plus symbol_ref const_int)).
+ Have it 4-byte cost. */
+ return COSTS_N_INSNS (1);
+
+ case REG:
+ /* Simply return 4-byte costs. */
+ return COSTS_N_INSNS (1);
+
+ case PLUS:
+ /* We do not need to check if the address is a legitimate address,
+ because this hook is never called with an invalid address.
+ But we better check the range of
+ const_int value for cost, if it exists. */
+ plus0 = XEXP (address, 0);
+ plus1 = XEXP (address, 1);
+
+ if (REG_P (plus0) && CONST_INT_P (plus1))
+ {
+ /* If it is possible to be lwi333/swi333 form,
+ make it 2-byte cost. */
+ if (satisfies_constraint_Iu05 (plus1))
+ return (COSTS_N_INSNS (1) - 2);
+ else
+ return COSTS_N_INSNS (1);
+ }
+
+ /* For other 'plus' situation, make it cost 4-byte. */
+ return COSTS_N_INSNS (1);
+
+ default:
+ break;
+ }
+
+ return COSTS_N_INSNS (4);
+}
+
+
+/* Defining the Output Assembler Language. */
+
+/* The Overall Framework of an Assembler File. */
+
+static void
+nds32_asm_file_start (void)
+{
+ int i;
+
+ default_file_start ();
+
+ /* Tell assembler which ABI we are using. */
+ fprintf (asm_out_file, "\t! ABI version\n");
+ fprintf (asm_out_file, "\t.abi_2\n");
+
+ /* Tell assembler that this asm code is generated by compiler. */
+ fprintf (asm_out_file, "\t! This asm file is generated by compiler\n");
+ fprintf (asm_out_file, "\t.flag\tverbatim\n");
+ /* Give assembler the size of each vector for interrupt handler. */
+ fprintf (asm_out_file, "\t! This vector size directive is required "
+ "for checking inconsistency on interrupt handler\n");
+ fprintf (asm_out_file, "\t.vec_size\t%d\n", nds32_isr_vector_size);
+
+ /* If user enables '-mforce-fp-as-gp' or compiles programs with -Os,
+ the compiler may produce 'la $fp,_FP_BASE_' instruction
+ at prologue for fp-as-gp optimization.
+ We should emit weak reference of _FP_BASE_ to avoid undefined reference
+ in case user does not pass '--relax' option to linker. */
+ if (TARGET_FORCE_FP_AS_GP || optimize_size)
+ {
+ fprintf (asm_out_file, "\t! This weak reference is required to do "
+ "fp-as-gp link time optimization\n");
+ fprintf (asm_out_file, "\t.weak\t_FP_BASE_\n");
+ }
+ /* If user enables '-mex9', we should emit relaxation directive
+ to tell linker that this file is allowed to do ex9 optimization. */
+ if (TARGET_EX9)
+ {
+ fprintf (asm_out_file, "\t! This relaxation directive is required "
+ "to do ex9 link time optimization\n");
+ fprintf (asm_out_file, "\t.relax\tex9\n");
+ }
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ if (TARGET_ISA_V2)
+ fprintf (asm_out_file, "\t! ISA family\t\t: %s\n", "V2");
+ if (TARGET_ISA_V3)
+ fprintf (asm_out_file, "\t! ISA family\t\t: %s\n", "V3");
+ if (TARGET_ISA_V3M)
+ fprintf (asm_out_file, "\t! ISA family\t\t: %s\n", "V3M");
+
+ fprintf (asm_out_file, "\t! Endian setting\t: %s\n",
+ ((TARGET_BIG_ENDIAN) ? "big-endian"
+ : "little-endian"));
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ fprintf (asm_out_file, "\t! Use conditional move\t\t: %s\n",
+ ((TARGET_CMOV) ? "Yes"
+ : "No"));
+ fprintf (asm_out_file, "\t! Use performance extension\t: %s\n",
+ ((TARGET_PERF_EXT) ? "Yes"
+ : "No"));
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ fprintf (asm_out_file, "\t! V3PUSH instructions\t: %s\n",
+ ((TARGET_V3PUSH) ? "Yes"
+ : "No"));
+ fprintf (asm_out_file, "\t! 16-bit instructions\t: %s\n",
+ ((TARGET_16_BIT) ? "Yes"
+ : "No"));
+ fprintf (asm_out_file, "\t! GP base access\t: %s\n",
+ ((TARGET_GP_DIRECT) ? "Yes"
+ : "No"));
+ fprintf (asm_out_file, "\t! Reduced registers set\t: %s\n",
+ ((TARGET_REDUCED_REGS) ? "Yes"
+ : "No"));
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ if (optimize_size)
+ fprintf (asm_out_file, "\t! Optimization level\t: -Os\n");
+ else
+ fprintf (asm_out_file, "\t! Optimization level\t: -O%d\n", optimize);
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ fprintf (asm_out_file, "\t! Cache block size\t: %d\n",
+ nds32_cache_block_size);
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ /* Initialize isr vector information array before compiling functions. */
+ for (i = 0; i < NDS32_N_ISR_VECTORS; i++)
+ {
+ nds32_isr_vectors[i].category = NDS32_ISR_NONE;
+ strcpy (nds32_isr_vectors[i].func_name, "");
+ nds32_isr_vectors[i].save_reg = NDS32_PARTIAL_SAVE;
+ nds32_isr_vectors[i].nested_type = NDS32_NOT_NESTED;
+ nds32_isr_vectors[i].total_n_vectors = 0;
+ strcpy (nds32_isr_vectors[i].nmi_name, "");
+ strcpy (nds32_isr_vectors[i].warm_name, "");
+ }
+}
+
+static void
+nds32_asm_file_end (void)
+{
+ int i;
+
+ /* If all the vectors are NDS32_ISR_NONE, we can return immediately. */
+ for (i = 0; i < NDS32_N_ISR_VECTORS; i++)
+ if (nds32_isr_vectors[i].category != NDS32_ISR_NONE)
+ break;
+
+ if (i == NDS32_N_ISR_VECTORS)
+ return;
+
+ /* At least one vector is NOT NDS32_ISR_NONE,
+ we should output isr vector information. */
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+ fprintf (asm_out_file, "\t! The isr vector information:\n");
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+
+ /* Check reset handler first. Its vector number is always 0. */
+ if (nds32_isr_vectors[0].category == NDS32_ISR_RESET)
+ {
+ nds32_emit_isr_reset_content ();
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+ }
+
+ /* Check other vectors, starting from vector number 1. */
+ for (i = 1; i < NDS32_N_ISR_VECTORS; i++)
+ {
+ if (nds32_isr_vectors[i].category == NDS32_ISR_INTERRUPT
+ || nds32_isr_vectors[i].category == NDS32_ISR_EXCEPTION)
+ {
+ /* Found one vector which is interupt or exception.
+ Output its jmptbl and vector section content. */
+ fprintf (asm_out_file, "\t! interrupt/exception vector %02d\n", i);
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+ nds32_emit_isr_jmptbl_section (i);
+ fprintf (asm_out_file, "\t! ....................................\n");
+ nds32_emit_isr_vector_section (i);
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+ }
+ }
+
+ fprintf (asm_out_file, "\t! ------------------------------------\n");
+}
+
+/* Output and Generation of Labels. */
+
+static void
+nds32_asm_globalize_label (FILE *stream, const char *name)
+{
+ fputs ("\t.global\t", stream);
+ assemble_name (stream, name);
+ fputs ("\n", stream);
+}
+
+/* Output of Assembler Instructions. */
+
+static void
+nds32_print_operand (FILE *stream, rtx x, int code)
+{
+ int op_value;
+
+ switch (code)
+ {
+ case 0 :
+ /* Do nothing special. */
+ break;
+
+ case 'V':
+ /* 'x' is supposed to be CONST_INT, get the value. */
+ gcc_assert (CONST_INT_P (x));
+ op_value = INTVAL (x);
+
+ /* According to the Andes architecture,
+ the system/user register index range is 0 ~ 1023.
+ In order to avoid conflict between user-specified-integer value
+ and enum-specified-register value,
+ the 'enum nds32_intrinsic_registers' value
+ in nds32_intrinsic.h starts from 1024. */
+ if (op_value < 1024 && op_value >= 0)
+ {
+ /* If user gives integer value directly (0~1023),
+ we just print out the value. */
+ fprintf (stream, "%d", op_value);
+ }
+ else if (op_value < 0
+ || op_value >= ((int) ARRAY_SIZE (nds32_intrinsic_register_names)
+ + 1024))
+ {
+ /* The enum index value for array size is out of range. */
+ error ("intrinsic register index is out of range");
+ }
+ else
+ {
+ /* If user applies normal way with __NDS32_REG_XXX__ enum data,
+ we can print out register name. Remember to substract 1024. */
+ fprintf (stream, "%s",
+ nds32_intrinsic_register_names[op_value - 1024]);
+ }
+
+ /* No need to handle following process, so return immediately. */
+ return;
+
+ default :
+ /* Unknown flag. */
+ output_operand_lossage ("invalid operand output code");
+ break;
+ }
+
+ switch (GET_CODE (x))
+ {
+ case LABEL_REF:
+ case SYMBOL_REF:
+ output_addr_const (stream, x);
+ break;
+
+ case REG:
+ /* Forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REGNO (x) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+
+ /* Normal cases, print out register name. */
+ fputs (reg_names[REGNO (x)], stream);
+ break;
+
+ case MEM:
+ output_address (XEXP (x, 0));
+ break;
+
+ case CODE_LABEL:
+ case CONST_INT:
+ case CONST:
+ output_addr_const (stream, x);
+ break;
+
+ default:
+ /* Generally, output_addr_const () is able to handle most cases.
+ We want to see what CODE could appear,
+ so we use gcc_unreachable() to stop it. */
+ debug_rtx (x);
+ gcc_unreachable ();
+ break;
+ }
+}
+
+static void
+nds32_print_operand_address (FILE *stream, rtx x)
+{
+ rtx op0, op1;
+
+ switch (GET_CODE (x))
+ {
+ case SYMBOL_REF:
+ case CONST:
+ /* [ + symbol_ref] */
+ /* [ + const_addr], where const_addr = symbol_ref + const_int */
+ fputs ("[ + ", stream);
+ output_addr_const (stream, x);
+ fputs ("]", stream);
+ break;
+
+ case REG:
+ /* Forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REGNO (x) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+
+ /* [Ra] */
+ fprintf (stream, "[%s]", reg_names[REGNO (x)]);
+ break;
+
+ case PLUS:
+ op0 = XEXP (x, 0);
+ op1 = XEXP (x, 1);
+
+ /* Checking op0, forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REG_P (op0)
+ && REGNO (op0) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+ /* Checking op1, forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REG_P (op1)
+ && REGNO (op1) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+
+ if (REG_P (op0) && CONST_INT_P (op1))
+ {
+ /* [Ra + imm] */
+ fprintf (stream, "[%s + (%d)]",
+ reg_names[REGNO (op0)], (int)INTVAL (op1));
+ }
+ else if (REG_P (op0) && REG_P (op1))
+ {
+ /* [Ra + Rb] */
+ fprintf (stream, "[%s + %s]",
+ reg_names[REGNO (op0)], reg_names[REGNO (op1)]);
+ }
+ else if (GET_CODE (op0) == MULT && REG_P (op1))
+ {
+ /* [Ra + Rb << sv]
+ From observation, the pattern looks like:
+ (plus:SI (mult:SI (reg:SI 58)
+ (const_int 4 [0x4]))
+ (reg/f:SI 57)) */
+ int sv;
+
+ /* We need to set sv to output shift value. */
+ if (INTVAL (XEXP (op0, 1)) == 1)
+ sv = 0;
+ else if (INTVAL (XEXP (op0, 1)) == 2)
+ sv = 1;
+ else if (INTVAL (XEXP (op0, 1)) == 4)
+ sv = 2;
+ else
+ gcc_unreachable ();
+
+ fprintf (stream, "[%s + %s << %d]",
+ reg_names[REGNO (op1)],
+ reg_names[REGNO (XEXP (op0, 0))],
+ sv);
+ }
+ else
+ {
+ /* The control flow is not supposed to be here. */
+ debug_rtx (x);
+ gcc_unreachable ();
+ }
+
+ break;
+
+ case POST_MODIFY:
+ /* (post_modify (regA) (plus (regA) (regB)))
+ (post_modify (regA) (plus (regA) (const_int)))
+ We would like to extract
+ regA and regB (or const_int) from plus rtx. */
+ op0 = XEXP (XEXP (x, 1), 0);
+ op1 = XEXP (XEXP (x, 1), 1);
+
+ /* Checking op0, forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REG_P (op0)
+ && REGNO (op0) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+ /* Checking op1, forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REG_P (op1)
+ && REGNO (op1) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+
+ if (REG_P (op0) && REG_P (op1))
+ {
+ /* [Ra], Rb */
+ fprintf (stream, "[%s], %s",
+ reg_names[REGNO (op0)], reg_names[REGNO (op1)]);
+ }
+ else if (REG_P (op0) && CONST_INT_P (op1))
+ {
+ /* [Ra], imm */
+ fprintf (stream, "[%s], %d",
+ reg_names[REGNO (op0)], (int)INTVAL (op1));
+ }
+ else
+ {
+ /* The control flow is not supposed to be here. */
+ debug_rtx (x);
+ gcc_unreachable ();
+ }
+
+ break;
+
+ case POST_INC:
+ case POST_DEC:
+ op0 = XEXP (x, 0);
+
+ /* Checking op0, forbid using static chain register ($r16)
+ on reduced-set registers configuration. */
+ if (TARGET_REDUCED_REGS
+ && REG_P (op0)
+ && REGNO (op0) == STATIC_CHAIN_REGNUM)
+ sorry ("a nested function is not supported for reduced registers");
+
+ if (REG_P (op0))
+ {
+ /* "[Ra], 1/2/4" or "[Ra], -1/-2/-4"
+ The 1/2/4 or -1/-2/-4 have been displayed in nds32.md.
+ We only need to deal with register Ra. */
+ fprintf (stream, "[%s]", reg_names[REGNO (op0)]);
+ }
+ else
+ {
+ /* The control flow is not supposed to be here. */
+ debug_rtx (x);
+ gcc_unreachable ();
+ }
+
+ break;
+
+ default :
+ /* Generally, output_addr_const () is able to handle most cases.
+ We want to see what CODE could appear,
+ so we use gcc_unreachable() to stop it. */
+ debug_rtx (x);
+ gcc_unreachable ();
+ break;
+ }
+}
+
+
+/* Defining target-specific uses of __attribute__. */
+
+/* Add some checking after merging attributes. */
+static tree
+nds32_merge_decl_attributes (tree olddecl, tree newdecl)
+{
+ tree combined_attrs;
+
+ /* Create combined attributes. */
+ combined_attrs = merge_attributes (DECL_ATTRIBUTES (olddecl),
+ DECL_ATTRIBUTES (newdecl));
+
+ /* Sinc newdecl is acutally a duplicate of olddecl,
+ we can take olddecl for some operations. */
+ if (TREE_CODE (olddecl) == FUNCTION_DECL)
+ {
+ /* Check isr-specific attributes conflict. */
+ nds32_check_isr_attrs_conflict (olddecl, combined_attrs);
+ }
+
+ return combined_attrs;
+}
+
+/* Add some checking when inserting attributes. */
+static void
+nds32_insert_attributes (tree decl, tree *attributes)
+{
+ /* For function declaration, we need to check isr-specific attributes:
+ 1. Call nds32_check_isr_attrs_conflict() to check any conflict.
+ 2. Check valid integer value for interrupt/exception.
+ 3. Check valid integer value for reset.
+ 4. Check valid function for nmi/warm. */
+ if (TREE_CODE (decl) == FUNCTION_DECL)
+ {
+ tree func_attrs;
+ tree intr, excp, reset;
+
+ /* Pick up function attributes. */
+ func_attrs = *attributes;
+
+ /* 1. Call nds32_check_isr_attrs_conflict() to check any conflict. */
+ nds32_check_isr_attrs_conflict (decl, func_attrs);
+
+ /* Now we are starting to check valid id value
+ for interrupt/exception/reset.
+ Note that we ONLY check its validity here.
+ To construct isr vector information, it is still performed
+ by nds32_construct_isr_vectors_information(). */
+ intr = lookup_attribute ("interrupt", func_attrs);
+ excp = lookup_attribute ("exception", func_attrs);
+ reset = lookup_attribute ("reset", func_attrs);
+
+ if (intr || excp)
+ {
+ /* Deal with interrupt/exception. */
+ tree id_list;
+ unsigned int lower_bound, upper_bound;
+
+ /* The way to handle interrupt or exception is the same,
+ we just need to take care of actual vector number.
+ For interrupt(0..63), the actual vector number is (9..72).
+ For exception(1..8), the actual vector number is (1..8). */
+ lower_bound = (intr) ? (0) : (1);
+ upper_bound = (intr) ? (63) : (8);
+
+ /* Prepare id list so that we can traverse id value. */
+ id_list = (intr) ? (TREE_VALUE (intr)) : (TREE_VALUE (excp));
+
+ /* 2. Check valid integer value for interrupt/exception. */
+ while (id_list)
+ {
+ tree id;
+
+ /* Pick up each vector id value. */
+ id = TREE_VALUE (id_list);
+ /* Issue error if it is not a valid integer value. */
+ if (TREE_CODE (id) != INTEGER_CST
+ || TREE_INT_CST_LOW (id) < lower_bound
+ || TREE_INT_CST_LOW (id) > upper_bound)
+ error ("invalid id value for interrupt/exception attribute");
+
+ /* Advance to next id. */
+ id_list = TREE_CHAIN (id_list);
+ }
+ }
+ else if (reset)
+ {
+ /* Deal with reset. */
+ tree id_list;
+ tree id;
+ tree nmi, warm;
+ unsigned int lower_bound;
+ unsigned int upper_bound;
+
+ /* Prepare id_list and identify id value so that
+ we can check if total number of vectors is valid. */
+ id_list = TREE_VALUE (reset);
+ id = TREE_VALUE (id_list);
+
+ /* The maximum numbers for user's interrupt is 64. */
+ lower_bound = 0;
+ upper_bound = 64;
+
+ /* 3. Check valid integer value for reset. */
+ if (TREE_CODE (id) != INTEGER_CST
+ || TREE_INT_CST_LOW (id) < lower_bound
+ || TREE_INT_CST_LOW (id) > upper_bound)
+ error ("invalid id value for reset attribute");
+
+ /* 4. Check valid function for nmi/warm. */
+ nmi = lookup_attribute ("nmi", func_attrs);
+ warm = lookup_attribute ("warm", func_attrs);
+
+ if (nmi != NULL_TREE)
+ {
+ tree nmi_func_list;
+ tree nmi_func;
+
+ nmi_func_list = TREE_VALUE (nmi);
+ nmi_func = TREE_VALUE (nmi_func_list);
+
+ /* Issue error if it is not a valid nmi function. */
+ if (TREE_CODE (nmi_func) != IDENTIFIER_NODE)
+ error ("invalid nmi function for reset attribute");
+ }
+
+ if (warm != NULL_TREE)
+ {
+ tree warm_func_list;
+ tree warm_func;
+
+ warm_func_list = TREE_VALUE (warm);
+ warm_func = TREE_VALUE (warm_func_list);
+
+ /* Issue error if it is not a valid warm function. */
+ if (TREE_CODE (warm_func) != IDENTIFIER_NODE)
+ error ("invalid warm function for reset attribute");
+ }
+ }
+ else
+ {
+ /* No interrupt, exception, or reset attribute is set. */
+ return;
+ }
+ }
+}
+
+static bool
+nds32_option_pragma_parse (tree args ATTRIBUTE_UNUSED,
+ tree pop_target ATTRIBUTE_UNUSED)
+{
+ /* Currently, we do not parse any pragma target by ourself,
+ so just simply return false. */
+ return false;
+}
+
+static void
+nds32_option_override (void)
+{
+ /* After all the command options have been parsed,
+ we shall deal with some flags for changing compiler settings. */
+
+ /* At first, we check if we have to strictly
+ set some flags based on ISA family. */
+ if (TARGET_ISA_V2)
+ {
+ /* Under V2 ISA, we need to strictly disable TARGET_V3PUSH. */
+ target_flags &= ~MASK_V3PUSH;
+ }
+ if (TARGET_ISA_V3)
+ {
+ /* Under V3 ISA, currently nothing should be strictly set. */
+ }
+ if (TARGET_ISA_V3M)
+ {
+ /* Under V3M ISA, we need to strictly enable TARGET_REDUCED_REGS. */
+ target_flags |= MASK_REDUCED_REGS;
+ /* Under V3M ISA, we need to strictly disable TARGET_PERF_EXT. */
+ target_flags &= ~MASK_PERF_EXT;
+ }
+
+ /* See if we are using reduced-set registers:
+ $r0~$r5, $r6~$r10, $r15, $r28, $r29, $r30, $r31
+ If so, we must forbid using $r11~$r14, $r16~$r27. */
+ if (TARGET_REDUCED_REGS)
+ {
+ int r;
+
+ /* Prevent register allocator from
+ choosing it as doing register allocation. */
+ for (r = 11; r <= 14; r++)
+ fixed_regs[r] = call_used_regs[r] = 1;
+ for (r = 16; r <= 27; r++)
+ fixed_regs[r] = call_used_regs[r] = 1;
+ }
+
+ /* See if user explicitly would like to use fp-as-gp optimization.
+ If so, we must prevent $fp from being allocated
+ during register allocation. */
+ if (TARGET_FORCE_FP_AS_GP)
+ fixed_regs[FP_REGNUM] = call_used_regs[FP_REGNUM] = 1;
+
+ if (!TARGET_16_BIT)
+ {
+ /* Under no 16 bit ISA, we need to strictly disable TARGET_V3PUSH. */
+ target_flags &= ~MASK_V3PUSH;
+ }
+
+ /* Currently, we don't support PIC code generation yet. */
+ if (flag_pic)
+ sorry ("not support -fpic");
+}
+
+
+/* Miscellaneous Parameters. */
+
+static void
+nds32_init_builtins (void)
+{
+ tree pointer_type_node = build_pointer_type (integer_type_node);
+
+ tree void_ftype_void = build_function_type (void_type_node,
+ void_list_node);
+
+ tree void_ftype_pint = build_function_type_list (void_type_node,
+ pointer_type_node,
+ NULL_TREE);
+
+ tree int_ftype_int = build_function_type_list (integer_type_node,
+ integer_type_node,
+ NULL_TREE);
+
+ tree void_ftype_int_int = build_function_type_list (void_type_node,
+ integer_type_node,
+ integer_type_node,
+ NULL_TREE);
+
+ /* Cache. */
+ add_builtin_function ("__builtin_nds32_isync", void_ftype_pint,
+ NDS32_BUILTIN_ISYNC,
+ BUILT_IN_MD, NULL, NULL_TREE);
+ add_builtin_function ("__builtin_nds32_isb", void_ftype_void,
+ NDS32_BUILTIN_ISB,
+ BUILT_IN_MD, NULL, NULL_TREE);
+
+ /* Register Transfer. */
+ add_builtin_function ("__builtin_nds32_mfsr", int_ftype_int,
+ NDS32_BUILTIN_MFSR,
+ BUILT_IN_MD, NULL, NULL_TREE);
+ add_builtin_function ("__builtin_nds32_mfusr", int_ftype_int,
+ NDS32_BUILTIN_MFUSR,
+ BUILT_IN_MD, NULL, NULL_TREE);
+ add_builtin_function ("__builtin_nds32_mtsr", void_ftype_int_int,
+ NDS32_BUILTIN_MTSR,
+ BUILT_IN_MD, NULL, NULL_TREE);
+ add_builtin_function ("__builtin_nds32_mtusr", void_ftype_int_int,
+ NDS32_BUILTIN_MTUSR,
+ BUILT_IN_MD, NULL, NULL_TREE);
+
+ /* Interrupt. */
+ add_builtin_function ("__builtin_nds32_setgie_en", void_ftype_void,
+ NDS32_BUILTIN_SETGIE_EN,
+ BUILT_IN_MD, NULL, NULL_TREE);
+ add_builtin_function ("__builtin_nds32_setgie_dis", void_ftype_void,
+ NDS32_BUILTIN_SETGIE_DIS,
+ BUILT_IN_MD, NULL, NULL_TREE);
+}
+
+static rtx
+nds32_expand_builtin (tree exp,
+ rtx target,
+ rtx subtarget ATTRIBUTE_UNUSED,
+ enum machine_mode mode ATTRIBUTE_UNUSED,
+ int ignore ATTRIBUTE_UNUSED)
+{
+ tree fndecl = TREE_OPERAND (CALL_EXPR_FN (exp), 0);
+
+ int fcode = DECL_FUNCTION_CODE (fndecl);
+
+ switch (fcode)
+ {
+ /* Cache. */
+ case NDS32_BUILTIN_ISYNC:
+ return nds32_expand_builtin_null_ftype_reg
+ (CODE_FOR_unspec_volatile_isync, exp, target);
+ case NDS32_BUILTIN_ISB:
+ /* Since there are no result and operands for isb instruciton,
+ we can simply emit this rtx. */
+ emit_insn (gen_unspec_volatile_isb ());
+ return target;
+
+ /* Register Transfer. */
+ case NDS32_BUILTIN_MFSR:
+ return nds32_expand_builtin_reg_ftype_imm
+ (CODE_FOR_unspec_volatile_mfsr, exp, target);
+ case NDS32_BUILTIN_MFUSR:
+ return nds32_expand_builtin_reg_ftype_imm
+ (CODE_FOR_unspec_volatile_mfusr, exp, target);
+ case NDS32_BUILTIN_MTSR:
+ return nds32_expand_builtin_null_ftype_reg_imm
+ (CODE_FOR_unspec_volatile_mtsr, exp, target);
+ case NDS32_BUILTIN_MTUSR:
+ return nds32_expand_builtin_null_ftype_reg_imm
+ (CODE_FOR_unspec_volatile_mtusr, exp, target);
+
+ /* Interrupt. */
+ case NDS32_BUILTIN_SETGIE_EN:
+ /* Since there are no result and operands for setgie.e instruciton,
+ we can simply emit this rtx. */
+ emit_insn (gen_unspec_volatile_setgie_en ());
+ return target;
+ case NDS32_BUILTIN_SETGIE_DIS:
+ /* Since there are no result and operands for setgie.d instruciton,
+ we can simply emit this rtx. */
+ emit_insn (gen_unspec_volatile_setgie_dis ());
+ return target;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ return NULL_RTX;
+}
+
+
+/* ------------------------------------------------------------------------ */
+
+/* PART 4: Implemet extern function definitions,
+ the prototype is in nds32-protos.h. */
+
+/* Defining Data Structures for Per-function Information. */
+
+void
+nds32_init_expanders (void)
+{
+ /* Arrange to initialize and mark the machine per-function status. */
+ init_machine_status = nds32_init_machine_status;
+}
+
+
+/* Register Usage. */
+
+/* How Values Fit in Registers. */
+
+int
+nds32_hard_regno_nregs (int regno ATTRIBUTE_UNUSED,
+ enum machine_mode mode)
+{
+ return ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD);
+}
+
+int
+nds32_hard_regno_mode_ok (int regno, enum machine_mode mode)
+{
+ /* Restrict double-word quantities to even register pairs. */
+ if (HARD_REGNO_NREGS (regno, mode) == 1
+ || !((regno) & 1))
+ return 1;
+
+ return 0;
+}
+
+
+/* Register Classes. */
+
+enum reg_class
+nds32_regno_reg_class (int regno)
+{
+ /* Refer to nds32.h for more register class details. */
+
+ if (regno >= 0 && regno <= 7)
+ return LOW_REGS;
+ else if (regno >= 8 && regno <= 11)
+ return MIDDLE_REGS;
+ else if (regno >= 12 && regno <= 14)
+ return HIGH_REGS;
+ else if (regno == 15)
+ return R15_TA_REG;
+ else if (regno >= 16 && regno <= 19)
+ return MIDDLE_REGS;
+ else if (regno >= 20 && regno <= 31)
+ return HIGH_REGS;
+ else if (regno == 32 || regno == 33)
+ return FRAME_REGS;
+ else
+ return NO_REGS;
+}
+
+
+/* Stack Layout and Calling Conventions. */
+
+/* Basic Stack Layout. */
+
+rtx
+nds32_return_addr_rtx (int count,
+ rtx frameaddr ATTRIBUTE_UNUSED)
+{
+ /* There is no way to determine the return address
+ if frameaddr is the frame that has 'count' steps
+ up from current frame. */
+ if (count != 0)
+ return NULL_RTX;
+
+ /* If count == 0, it means we are at current frame,
+ the return address is $r30 ($lp). */
+ return get_hard_reg_initial_val (Pmode, LP_REGNUM);
+}
+
+/* Eliminating Frame Pointer and Arg Pointer. */
+
+HOST_WIDE_INT
+nds32_initial_elimination_offset (unsigned int from_reg, unsigned int to_reg)
+{
+ HOST_WIDE_INT offset;
+
+ /* Compute and setup stack frame size.
+ The result will be in cfun->machine. */
+ nds32_compute_stack_frame ();
+
+ /* Remember to consider
+ cfun->machine->callee_saved_area_padding_bytes
+ when calculating offset. */
+ if (from_reg == ARG_POINTER_REGNUM && to_reg == STACK_POINTER_REGNUM)
+ {
+ offset = (cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size
+ + cfun->machine->callee_saved_area_padding_bytes
+ + cfun->machine->local_size
+ + cfun->machine->out_args_size);
+ }
+ else if (from_reg == ARG_POINTER_REGNUM
+ && to_reg == HARD_FRAME_POINTER_REGNUM)
+ {
+ offset = 0;
+ }
+ else if (from_reg == FRAME_POINTER_REGNUM
+ && to_reg == STACK_POINTER_REGNUM)
+ {
+ offset = (cfun->machine->local_size + cfun->machine->out_args_size);
+ }
+ else if (from_reg == FRAME_POINTER_REGNUM
+ && to_reg == HARD_FRAME_POINTER_REGNUM)
+ {
+ offset = (-1) * (cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size
+ + cfun->machine->callee_saved_area_padding_bytes);
+ }
+ else
+ {
+ gcc_unreachable ();
+ }
+
+ return offset;
+}
+
+/* Passing Arguments in Registers. */
+
+void
+nds32_init_cumulative_args (CUMULATIVE_ARGS *cum,
+ tree fntype ATTRIBUTE_UNUSED,
+ rtx libname ATTRIBUTE_UNUSED,
+ tree fndecl ATTRIBUTE_UNUSED,
+ int n_named_args ATTRIBUTE_UNUSED)
+{
+ /* Initial available registers
+ (in offset, corresponding to NDS32_GPR_ARG_FIRST_REGNUM)
+ for passing arguments. */
+ cum->reg_offset = 0;
+}
+
+/* Function Entry and Exit. */
+
+/* Function for normal multiple push prologue. */
+void
+nds32_expand_prologue (void)
+{
+ int fp_adjust;
+ int sp_adjust;
+ int en4_const;
+
+ rtx Rb, Re;
+ rtx push_insn;
+ rtx fp_adjust_insn, sp_adjust_insn;
+
+ /* Compute and setup stack frame size.
+ The result will be in cfun->machine. */
+ nds32_compute_stack_frame ();
+
+ /* If the function is 'naked',
+ we do not have to generate prologue code fragment. */
+ if (cfun->machine->naked_p)
+ return;
+
+ /* Get callee_first_regno and callee_last_regno. */
+ Rb = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_first_regno);
+ Re = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_last_regno);
+
+ /* push_insn = gen_stack_push_multiple(first_regno, last_regno),
+ the pattern 'stack_push_multiple' is implemented in nds32.md.
+ For En4 field, we have to calculate its constant value.
+ Refer to Andes ISA for more information. */
+ en4_const = 0;
+ if (cfun->machine->fp_size)
+ en4_const += 8;
+ if (cfun->machine->gp_size)
+ en4_const += 4;
+ if (cfun->machine->lp_size)
+ en4_const += 2;
+
+ /* If $fp, $gp, $lp, and all callee-save registers are NOT required
+ to be saved, we don't have to create multiple push instruction.
+ Otherwise, a multiple push instruction is needed. */
+ if (!(REGNO (Rb) == SP_REGNUM && REGNO (Re) == SP_REGNUM && en4_const == 0))
+ {
+ /* Create multiple push instruction rtx. */
+ push_insn = nds32_gen_stack_push_multiple (Rb, Re, GEN_INT (en4_const));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ push_insn = emit_insn (push_insn);
+
+ /* The insn rtx 'push_insn' will change frame layout.
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
+ RTX_FRAME_RELATED_P (push_insn) = 1;
+ }
+
+ /* Check frame_pointer_needed to see
+ if we shall emit fp adjustment instruction. */
+ if (frame_pointer_needed)
+ {
+ /* adjust $fp = $sp + ($fp size) + ($gp size) + ($lp size)
+ + (4 * callee-saved-registers)
+ Note: No need to adjust
+ cfun->machine->callee_saved_area_padding_bytes,
+ because, at this point, stack pointer is just
+ at the position after push instruction. */
+ fp_adjust = cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size;
+ fp_adjust_insn = gen_addsi3 (hard_frame_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (fp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ fp_adjust_insn = emit_insn (fp_adjust_insn);
+ }
+
+ /* Adjust $sp = $sp - local_size - out_args_size
+ - callee_saved_area_padding_bytes. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+ /* sp_adjust value may be out of range of the addi instruction,
+ create alternative add behavior with TA_REGNUM if necessary,
+ using NEGATIVE value to tell that we are decreasing address. */
+ sp_adjust = nds32_force_addi_stack_int ( (-1) * sp_adjust);
+ if (sp_adjust)
+ {
+ /* Generate sp adjustment instruction if and only if sp_adjust != 0. */
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-1 * sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+
+ /* The insn rtx 'sp_adjust_insn' will change frame layout.
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
+ RTX_FRAME_RELATED_P (sp_adjust_insn) = 1;
+ }
+
+ /* Prevent the instruction scheduler from
+ moving instructions across the boundary. */
+ emit_insn (gen_blockage ());
+}
+
+/* Function for normal multiple pop epilogue. */
+void
+nds32_expand_epilogue (void)
+{
+ int sp_adjust;
+ int en4_const;
+
+ rtx Rb, Re;
+ rtx pop_insn;
+ rtx sp_adjust_insn;
+
+ /* Compute and setup stack frame size.
+ The result will be in cfun->machine. */
+ nds32_compute_stack_frame ();
+
+ /* Prevent the instruction scheduler from
+ moving instructions across the boundary. */
+ emit_insn (gen_blockage ());
+
+ /* If the function is 'naked', we do not have to generate
+ epilogue code fragment BUT 'ret' instruction. */
+ if (cfun->machine->naked_p)
+ {
+ /* Generate return instruction by using
+ unspec_volatile_func_return pattern.
+ Make sure this instruction is after gen_blockage().
+ NOTE that $lp will become 'live'
+ after this instruction has been emitted. */
+ emit_insn (gen_unspec_volatile_func_return ());
+ return;
+ }
+
+ if (frame_pointer_needed)
+ {
+ /* adjust $sp = $fp - ($fp size) - ($gp size) - ($lp size)
+ - (4 * callee-saved-registers)
+ Note: No need to adjust
+ cfun->machine->callee_saved_area_padding_bytes,
+ because we want to adjust stack pointer
+ to the position for pop instruction. */
+ sp_adjust = cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size;
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ hard_frame_pointer_rtx,
+ GEN_INT (-1 * sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+ }
+ else
+ {
+ /* If frame pointer is NOT needed,
+ we cannot calculate the sp adjustment from frame pointer.
+ Instead, we calculate the adjustment by local_size,
+ out_args_size, and callee_saved_area_padding_bytes.
+ Notice that such sp adjustment value may be out of range,
+ so we have to deal with it as well. */
+
+ /* Adjust $sp = $sp + local_size + out_args_size
+ + callee_saved_area_padding_bytes. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+ /* sp_adjust value may be out of range of the addi instruction,
+ create alternative add behavior with TA_REGNUM if necessary,
+ using POSITIVE value to tell that we are increasing address. */
+ sp_adjust = nds32_force_addi_stack_int (sp_adjust);
+ if (sp_adjust)
+ {
+ /* Generate sp adjustment instruction
+ if and only if sp_adjust != 0. */
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+ }
+ }
+
+ /* Get callee_first_regno and callee_last_regno. */
+ Rb = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_first_regno);
+ Re = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_last_regno);
+
+ /* pop_insn = gen_stack_pop_multiple(first_regno, last_regno),
+ the pattern 'stack_pop_multiple' is implementad in nds32.md.
+ For En4 field, we have to calculate its constant value.
+ Refer to Andes ISA for more information. */
+ en4_const = 0;
+ if (cfun->machine->fp_size)
+ en4_const += 8;
+ if (cfun->machine->gp_size)
+ en4_const += 4;
+ if (cfun->machine->lp_size)
+ en4_const += 2;
+
+ /* If $fp, $gp, $lp, and all callee-save registers are NOT required
+ to be saved, we don't have to create multiple pop instruction.
+ Otherwise, a multiple pop instruction is needed. */
+ if (!(REGNO (Rb) == SP_REGNUM && REGNO (Re) == SP_REGNUM && en4_const == 0))
+ {
+ /* Create multiple push instruction rtx. */
+ pop_insn = nds32_gen_stack_pop_multiple (Rb, Re, GEN_INT (en4_const));
+ /* Emit pop instruction. */
+ emit_insn (pop_insn);
+ }
+
+ /* Generate return instruction by using
+ unspec_volatile_func_return pattern. */
+ emit_insn (gen_unspec_volatile_func_return ());
+}
+
+/* Function for v3push prologue. */
+void
+nds32_expand_prologue_v3push (void)
+{
+ int fp_adjust;
+ int sp_adjust;
+
+ rtx Rb, Re;
+ rtx push_insn;
+ rtx fp_adjust_insn, sp_adjust_insn;
+
+ /* Compute and setup stack frame size.
+ The result will be in cfun->machine. */
+ nds32_compute_stack_frame ();
+
+ /* If the function is 'naked',
+ we do not have to generate prologue code fragment. */
+ if (cfun->machine->naked_p)
+ return;
+
+ /* Get callee_first_regno and callee_last_regno. */
+ Rb = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_first_regno);
+ Re = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_last_regno);
+
+ /* Calculate sp_adjust first to test if 'push25 Re,imm8u' is available,
+ where imm8u has to be 8-byte alignment. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+
+ if (satisfies_constraint_Iu08 (GEN_INT (sp_adjust))
+ && NDS32_DOUBLE_WORD_ALIGN_P (sp_adjust))
+ {
+ /* We can use 'push25 Re,imm8u'. */
+
+ /* push_insn = gen_stack_v3push(last_regno, sp_adjust),
+ the pattern 'stack_v3push' is implemented in nds32.md.
+ The (const_int 14) means v3push always push { $fp $gp $lp }. */
+ push_insn = nds32_gen_stack_v3push (Rb, Re,
+ GEN_INT (14), GEN_INT (sp_adjust));
+ /* emit rtx into instructions list and receive INSN rtx form */
+ push_insn = emit_insn (push_insn);
+
+ /* The insn rtx 'push_insn' will change frame layout.
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
+ RTX_FRAME_RELATED_P (push_insn) = 1;
+
+ /* Check frame_pointer_needed to see
+ if we shall emit fp adjustment instruction. */
+ if (frame_pointer_needed)
+ {
+ /* adjust $fp = $sp + 4 ($fp size)
+ + 4 ($gp size)
+ + 4 ($lp size)
+ + (4 * n) (callee-saved registers)
+ + sp_adjust ('push25 Re,imm8u')
+ Note: Since we use 'push25 Re,imm8u',
+ the position of stack pointer is further
+ changed after push instruction.
+ Hence, we need to take sp_adjust value
+ into consideration. */
+ fp_adjust = cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size
+ + sp_adjust;
+ fp_adjust_insn = gen_addsi3 (hard_frame_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (fp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ fp_adjust_insn = emit_insn (fp_adjust_insn);
+ }
+ }
+ else
+ {
+ /* We have to use 'push25 Re,0' and
+ expand one more instruction to adjust $sp later. */
+
+ /* push_insn = gen_stack_v3push(last_regno, sp_adjust),
+ the pattern 'stack_v3push' is implemented in nds32.md.
+ The (const_int 14) means v3push always push { $fp $gp $lp }. */
+ push_insn = nds32_gen_stack_v3push (Rb, Re,
+ GEN_INT (14), GEN_INT (0));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ push_insn = emit_insn (push_insn);
+
+ /* The insn rtx 'push_insn' will change frame layout.
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
+ RTX_FRAME_RELATED_P (push_insn) = 1;
+
+ /* Check frame_pointer_needed to see
+ if we shall emit fp adjustment instruction. */
+ if (frame_pointer_needed)
+ {
+ /* adjust $fp = $sp + 4 ($fp size)
+ + 4 ($gp size)
+ + 4 ($lp size)
+ + (4 * n) (callee-saved registers)
+ Note: Since we use 'push25 Re,0',
+ the stack pointer is just at the position
+ after push instruction.
+ No need to take sp_adjust into consideration. */
+ fp_adjust = cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size;
+ fp_adjust_insn = gen_addsi3 (hard_frame_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (fp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ fp_adjust_insn = emit_insn (fp_adjust_insn);
+ }
+
+ /* Because we use 'push25 Re,0',
+ we need to expand one more instruction to adjust $sp.
+ However, sp_adjust value may be out of range of the addi instruction,
+ create alternative add behavior with TA_REGNUM if necessary,
+ using NEGATIVE value to tell that we are decreasing address. */
+ sp_adjust = nds32_force_addi_stack_int ( (-1) * sp_adjust);
+ if (sp_adjust)
+ {
+ /* Generate sp adjustment instruction
+ if and only if sp_adjust != 0. */
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-1 * sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+
+ /* The insn rtx 'sp_adjust_insn' will change frame layout.
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
+ RTX_FRAME_RELATED_P (sp_adjust_insn) = 1;
+ }
+ }
+
+ /* Prevent the instruction scheduler from
+ moving instructions across the boundary. */
+ emit_insn (gen_blockage ());
+}
+
+/* Function for v3pop epilogue. */
+void
+nds32_expand_epilogue_v3pop (void)
+{
+ int sp_adjust;
+
+ rtx Rb, Re;
+ rtx pop_insn;
+ rtx sp_adjust_insn;
+
+ /* Compute and setup stack frame size.
+ The result will be in cfun->machine. */
+ nds32_compute_stack_frame ();
+
+ /* Prevent the instruction scheduler from
+ moving instructions across the boundary. */
+ emit_insn (gen_blockage ());
+
+ /* If the function is 'naked', we do not have to generate
+ epilogue code fragment BUT 'ret' instruction. */
+ if (cfun->machine->naked_p)
+ {
+ /* Generate return instruction by using
+ unspec_volatile_func_return pattern.
+ Make sure this instruction is after gen_blockage().
+ NOTE that $lp will become 'live'
+ after this instruction has been emitted. */
+ emit_insn (gen_unspec_volatile_func_return ());
+ return;
+ }
+
+ /* Get callee_first_regno and callee_last_regno. */
+ Rb = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_first_regno);
+ Re = gen_rtx_REG (SImode, cfun->machine->callee_saved_regs_last_regno);
+
+ /* Calculate sp_adjust first to test if 'pop25 Re,imm8u' is available,
+ where imm8u has to be 8-byte alignment. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+
+ /* We have to consider alloca issue as well.
+ If the function does call alloca(), the stack pointer is not fixed.
+ In that case, we cannot use 'pop25 Re,imm8u' directly.
+ We have to caculate stack pointer from frame pointer
+ and then use 'pop25 Re,0'.
+ Of course, the frame_pointer_needed should be nonzero
+ if the function calls alloca(). */
+ if (satisfies_constraint_Iu08 (GEN_INT (sp_adjust))
+ && NDS32_DOUBLE_WORD_ALIGN_P (sp_adjust)
+ && !cfun->calls_alloca)
+ {
+ /* We can use 'pop25 Re,imm8u'. */
+
+ /* pop_insn = gen_stack_v3pop(last_regno, sp_adjust),
+ the pattern 'stack_v3pop' is implementad in nds32.md.
+ The (const_int 14) means v3pop always push { $fp $gp $lp }. */
+ pop_insn = nds32_gen_stack_v3pop (Rb, Re,
+ GEN_INT (14), GEN_INT (sp_adjust));
+
+ /* Emit pop instruction. */
+ emit_insn (pop_insn);
+ }
+ else
+ {
+ /* We have to use 'pop25 Re,0', and prior to it,
+ we must expand one more instruction to adjust $sp. */
+
+ if (frame_pointer_needed)
+ {
+ /* adjust $sp = $fp - 4 ($fp size)
+ - 4 ($gp size)
+ - 4 ($lp size)
+ - (4 * n) (callee-saved registers)
+ Note: No need to adjust
+ cfun->machine->callee_saved_area_padding_bytes,
+ because we want to adjust stack pointer
+ to the position for pop instruction. */
+ sp_adjust = cfun->machine->fp_size
+ + cfun->machine->gp_size
+ + cfun->machine->lp_size
+ + cfun->machine->callee_saved_regs_size;
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ hard_frame_pointer_rtx,
+ GEN_INT (-1 * sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+ }
+ else
+ {
+ /* If frame pointer is NOT needed,
+ we cannot calculate the sp adjustment from frame pointer.
+ Instead, we calculate the adjustment by local_size,
+ out_args_size, and callee_saved_area_padding_bytes.
+ Notice that such sp adjustment value may be out of range,
+ so we have to deal with it as well. */
+
+ /* Adjust $sp = $sp + local_size + out_args_size
+ + callee_saved_area_padding_bytes. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+ /* sp_adjust value may be out of range of the addi instruction,
+ create alternative add behavior with TA_REGNUM if necessary,
+ using POSITIVE value to tell that we are increasing address. */
+ sp_adjust = nds32_force_addi_stack_int (sp_adjust);
+ if (sp_adjust)
+ {
+ /* Generate sp adjustment instruction
+ if and only if sp_adjust != 0. */
+ sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (sp_adjust));
+ /* Emit rtx into instructions list and receive INSN rtx form. */
+ sp_adjust_insn = emit_insn (sp_adjust_insn);
+ }
+ }
+
+ /* pop_insn = gen_stack_v3pop(last_regno, sp_adjust),
+ the pattern 'stack_v3pop' is implementad in nds32.md. */
+ /* The (const_int 14) means v3pop always push { $fp $gp $lp }. */
+ pop_insn = nds32_gen_stack_v3pop (Rb, Re,
+ GEN_INT (14), GEN_INT (0));
+
+ /* Emit pop instruction. */
+ emit_insn (pop_insn);
+ }
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* Function to test 333-form for load/store instructions.
+ This is auxiliary extern function for auxiliary macro in nds32.h.
+ Because it is a little complicated, we use function instead of macro. */
+bool
+nds32_ls_333_p (rtx rt, rtx ra, rtx imm, enum machine_mode mode)
+{
+ if (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS
+ && REGNO_REG_CLASS (REGNO (ra)) == LOW_REGS)
+ {
+ if (GET_MODE_SIZE (mode) == 4)
+ return satisfies_constraint_Iu05 (imm);
+
+ if (GET_MODE_SIZE (mode) == 2)
+ return satisfies_constraint_Iu04 (imm);
+
+ if (GET_MODE_SIZE (mode) == 1)
+ return satisfies_constraint_Iu03 (imm);
+ }
+
+ return false;
+}
+
+
+/* Functions to expand load_multiple and store_multiple.
+ They are auxiliary extern functions to help create rtx template.
+ Check nds32-multiple.md file for the patterns. */
+rtx
+nds32_expand_load_multiple (int base_regno, int count,
+ rtx base_addr, rtx basemem)
+{
+ int par_index;
+ int offset;
+ rtx result;
+ rtx new_addr, mem, reg;
+
+ /* Create the pattern that is presented in nds32-multiple.md. */
+
+ result = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
+
+ for (par_index = 0; par_index < count; par_index++)
+ {
+ offset = par_index * 4;
+ /* 4-byte for loading data to each register. */
+ new_addr = plus_constant (Pmode, base_addr, offset);
+ mem = adjust_automodify_address_nv (basemem, SImode,
+ new_addr, offset);
+ reg = gen_rtx_REG (SImode, base_regno + par_index);
+
+ XVECEXP (result, 0, par_index) = gen_rtx_SET (VOIDmode, reg, mem);
+ }
+
+ return result;
+}
+
+rtx
+nds32_expand_store_multiple (int base_regno, int count,
+ rtx base_addr, rtx basemem)
+{
+ int par_index;
+ int offset;
+ rtx result;
+ rtx new_addr, mem, reg;
+
+ /* Create the pattern that is presented in nds32-multiple.md. */
+
+ result = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
+
+ for (par_index = 0; par_index < count; par_index++)
+ {
+ offset = par_index * 4;
+ /* 4-byte for storing data to memory. */
+ new_addr = plus_constant (Pmode, base_addr, offset);
+ mem = adjust_automodify_address_nv (basemem, SImode,
+ new_addr, offset);
+ reg = gen_rtx_REG (SImode, base_regno + par_index);
+
+ XVECEXP (result, 0, par_index) = gen_rtx_SET (VOIDmode, mem, reg);
+ }
+
+ return result;
+}
+
+/* Function to move block memory content by
+ using load_multiple and store_multiple.
+ This is auxiliary extern function to help create rtx template.
+ Check nds32-multiple.md file for the patterns. */
+int
+nds32_expand_movmemqi (rtx dstmem, rtx srcmem, rtx total_bytes, rtx alignment)
+{
+ HOST_WIDE_INT in_words, out_words;
+ rtx dst_base_reg, src_base_reg;
+ int maximum_bytes;
+
+ /* Because reduced-set regsiters has few registers
+ (r0~r5, r6~10, r15, r28~r31, where 'r15' and 'r28~r31'
+ cannot be used for register allocation),
+ using 8 registers (32 bytes) for moving memory block
+ may easily consume all of them.
+ It makes register allocation/spilling hard to work.
+ So we only allow maximum=4 registers (16 bytes) for
+ moving memory block under reduced-set registers. */
+ if (TARGET_REDUCED_REGS)
+ maximum_bytes = 16;
+ else
+ maximum_bytes = 32;
+
+ /* 1. Total_bytes is integer for sure.
+ 2. Alignment is integer for sure.
+ 3. Maximum 4 or 8 registers, 4 * 4 = 16 bytes, 8 * 4 = 32 bytes.
+ 4. Requires (n * 4) block size.
+ 5. Requires 4-byte alignment. */
+ if (GET_CODE (total_bytes) != CONST_INT
+ || GET_CODE (alignment) != CONST_INT
+ || INTVAL (total_bytes) > maximum_bytes
+ || INTVAL (total_bytes) & 3
+ || INTVAL (alignment) & 3)
+ return 0;
+
+ dst_base_reg = copy_to_mode_reg (SImode, XEXP (dstmem, 0));
+ src_base_reg = copy_to_mode_reg (SImode, XEXP (srcmem, 0));
+
+ out_words = in_words = INTVAL (total_bytes) / UNITS_PER_WORD;
+
+ emit_insn (nds32_expand_load_multiple (0, in_words, src_base_reg, srcmem));
+ emit_insn (nds32_expand_store_multiple (0, out_words, dst_base_reg, dstmem));
+
+ /* Successfully create patterns, return 1. */
+ return 1;
+}
+
+/* Function to check whether the OP is a valid load/store operation.
+ This is a helper function for the predicates:
+ 'nds32_load_multiple_operation' and 'nds32_store_multiple_operation'
+ in predicates.md file.
+
+ The OP is supposed to be a parallel rtx.
+ For each element within this parallel rtx:
+ (set (reg) (mem addr)) is the form for load operation.
+ (set (mem addr) (reg)) is the form for store operation.
+ We have to extract reg and mem of every element and
+ check if the information is valid for multiple load/store operation. */
+bool
+nds32_valid_multiple_load_store (rtx op, bool load_p)
+{
+ HOST_WIDE_INT count;
+ int first_elt_regno;
+ rtx elt_reg;
+ rtx elt_mem;
+ int i;
+ rtx elt;
+
+ /* Get the counts of elements in the parallel rtx. */
+ count = XVECLEN (op, 0);
+ /* Pick up the first element. */
+ elt = XVECEXP (op, 0, 0);
+
+ /* Perform some quick check for the first element in the parallel rtx. */
+ if (GET_CODE (elt) != SET
+ || count <= 1
+ || count > 8)
+ return false;
+
+ /* Pick up regno of first element for further detail checking.
+ Note that the form is different between load and store operation. */
+ if (load_p)
+ {
+ if (GET_CODE (SET_DEST (elt)) != REG
+ || GET_CODE (SET_SRC (elt)) != MEM)
+ return false;
+
+ first_elt_regno = REGNO (SET_DEST (elt));
+ }
+ else
+ {
+ if (GET_CODE (SET_SRC (elt)) != REG
+ || GET_CODE (SET_DEST (elt)) != MEM)
+ return false;
+
+ first_elt_regno = REGNO (SET_SRC (elt));
+ }
+
+ /* Perform detail check for each element.
+ Refer to nds32-multiple.md for more information
+ about following checking. */
+ for (i = 0; i < count; i++)
+ {
+ elt = XVECEXP (op, 0, i);
+
+ /* If this element is not a 'set' rtx, return false immediately. */
+ if (GET_CODE (elt) != SET)
+ return false;
+
+ /* Pick up reg and mem of this element. */
+ elt_reg = load_p ? SET_DEST (elt) : SET_SRC (elt);
+ elt_mem = load_p ? SET_SRC (elt) : SET_DEST (elt);
+
+ /* If elt_reg is not a expected reg rtx, return false. */
+ if (GET_CODE (elt_reg) != REG || GET_MODE (elt_reg) != SImode)
+ return false;
+ /* If elt_mem is not a expected mem rtx, return false. */
+ if (GET_CODE (elt_mem) != MEM || GET_MODE (elt_mem) != SImode)
+ return false;
+
+ /* If the register number is not continuous, return false. */
+ if (REGNO (elt_reg) != (unsigned int) (first_elt_regno + i))
+ return false;
+ /* If the address of mem rtx is a not register or plus operation,
+ we should return false as well. */
+ if (GET_CODE (XEXP (elt_mem, 0)) != REG
+ && GET_CODE (XEXP (elt_mem, 0)) != PLUS)
+ return false;
+ }
+
+ return true;
+}
+
+/* Function to check whether the OP is a valid stack push/pop operation.
+ For a valid stack operation, the last element of parallel rtx must be:
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int X)))
+ See the prologue/epilogue implementation for details. */
+bool
+nds32_valid_stack_push_pop (rtx op, bool push_p ATTRIBUTE_UNUSED)
+{
+ HOST_WIDE_INT count;
+ rtx elt;
+ rtx elt_reg;
+ rtx elt_plus;
+
+ /* Get the counts of elements in the parallel rtx. */
+ count = XVECLEN (op, 0);
+ /* Pick up the last element. */
+ elt = XVECEXP (op, 0, count - 1);
+
+ /* Check this is (set ...) rtx. */
+ if (GET_CODE (elt) != SET)
+ return false;
+
+ /* Extract its destination and source rtx. */
+ elt_reg = SET_DEST (elt);
+ elt_plus = SET_SRC (elt);
+
+ /* Check this is (set (reg) (plus reg const)) pattern. */
+ if (GET_CODE (elt_reg) != REG || GET_CODE (elt_plus) != PLUS)
+ return false;
+
+ return true;
+}
+
+/* Computing the Length of an Insn.
+ Modifies the length assigned to instruction INSN.
+ LEN is the initially computed length of the insn. */
+int
+nds32_adjust_insn_length (rtx insn, int length)
+{
+ rtx src, dst;
+
+ switch (recog_memoized (insn))
+ {
+ case CODE_FOR_move_df:
+ case CODE_FOR_move_di:
+ /* Adjust length of movd44 to 2. */
+ src = XEXP (PATTERN (insn), 1);
+ dst = XEXP (PATTERN (insn), 0);
+
+ if (REG_P (src)
+ && REG_P (dst)
+ && (REGNO (src) % 2) == 0
+ && (REGNO (dst) % 2) == 0)
+ length = 2;
+ break;
+
+ default:
+ break;
+ }
+
+ return length;
+}
+
+
+/* Function to check if 'bclr' instruction can be used with IVAL. */
+int
+nds32_can_use_bclr_p (int ival)
+{
+ int one_bit_count;
+
+ /* Calculate the number of 1-bit of (~ival), if there is only one 1-bit,
+ it means the original ival has only one 0-bit,
+ So it is ok to perform 'bclr' operation. */
+
+ one_bit_count = popcount_hwi ((unsigned HOST_WIDE_INT) (~ival));
+
+ /* 'bclr' is a performance extension instruction. */
+ return (TARGET_PERF_EXT && (one_bit_count == 1));
+}
+
+/* Function to check if 'bset' instruction can be used with IVAL. */
+int
+nds32_can_use_bset_p (int ival)
+{
+ int one_bit_count;
+
+ /* Caculate the number of 1-bit of ival, if there is only one 1-bit,
+ it is ok to perform 'bset' operation. */
+
+ one_bit_count = popcount_hwi ((unsigned HOST_WIDE_INT) (ival));
+
+ /* 'bset' is a performance extension instruction. */
+ return (TARGET_PERF_EXT && (one_bit_count == 1));
+}
+
+/* Function to check if 'btgl' instruction can be used with IVAL. */
+int
+nds32_can_use_btgl_p (int ival)
+{
+ int one_bit_count;
+
+ /* Caculate the number of 1-bit of ival, if there is only one 1-bit,
+ it is ok to perform 'btgl' operation. */
+
+ one_bit_count = popcount_hwi ((unsigned HOST_WIDE_INT) (ival));
+
+ /* 'btgl' is a performance extension instruction. */
+ return (TARGET_PERF_EXT && (one_bit_count == 1));
+}
+
+/* Function to check if 'bitci' instruction can be used with IVAL. */
+int
+nds32_can_use_bitci_p (int ival)
+{
+ /* If we are using V3 ISA, we have 'bitci' instruction.
+ Try to see if we can present 'andi' semantic with
+ such 'bit-clear-immediate' operation.
+ For example, 'andi $r0,$r0,0xfffffffc' can be
+ presented with 'bitci $r0,$r0,3'. */
+ return (TARGET_ISA_V3
+ && (ival < 0)
+ && satisfies_constraint_Iu15 (gen_int_mode (~ival, SImode)));
+}
+
+
+/* Return true if is load/store with SYMBOL_REF addressing mode
+ and memory mode is SImode. */
+bool
+nds32_symbol_load_store_p (rtx insn)
+{
+ rtx mem_src = NULL_RTX;
+
+ switch (get_attr_type (insn))
+ {
+ case TYPE_LOAD:
+ mem_src = SET_SRC (PATTERN (insn));
+ break;
+ case TYPE_STORE:
+ mem_src = SET_DEST (PATTERN (insn));
+ break;
+ default:
+ break;
+ }
+
+ /* Find load/store insn with addressing mode is SYMBOL_REF. */
+ if (mem_src != NULL_RTX)
+ {
+ if ((GET_CODE (mem_src) == ZERO_EXTEND)
+ || (GET_CODE (mem_src) == SIGN_EXTEND))
+ mem_src = XEXP (mem_src, 0);
+
+ if ((GET_CODE (XEXP (mem_src, 0)) == SYMBOL_REF)
+ || (GET_CODE (XEXP (mem_src, 0)) == LO_SUM))
+ return true;
+ }
+
+ return false;
+}
+
+/* Function to determine whether it is worth to do fp_as_gp optimization.
+ Return 0: It is NOT worth to do fp_as_gp optimization.
+ Return 1: It is APPROXIMATELY worth to do fp_as_gp optimization.
+ Note that if it is worth to do fp_as_gp optimization,
+ we MUST set FP_REGNUM ever live in this function. */
+int
+nds32_fp_as_gp_check_available (void)
+{
+ /* If the register allocation and reload phase
+ have not completed yet, return 0 immediately.
+ We must check this at beginning, otherwise
+ the subsequent checking may cause segmentation fault. */
+ if (!reload_completed)
+ return 0;
+
+ /* If cfun->machine->fp_as_gp_p is 1,
+ it means we have evaluted it previously
+ and decided to use fp_ap_gp optimization.
+ So there is no need to evalute it again.
+ Return 1 immediately. */
+ if (cfun->machine->fp_as_gp_p)
+ return 1;
+
+ /* If there exists ANY of following conditions,
+ we DO NOT perform fp_as_gp optimization:
+ 1. TARGET_FORBID_FP_AS_GP is set
+ regardless of the TARGET_FORCE_FP_AS_GP.
+ 2. User explicitly uses 'naked' attribute.
+ 3. Not optimize for size.
+ 4. Need frame pointer.
+ 5. If $fp is already required to be saved,
+ it means $fp is already choosen by register allocator.
+ Thus we better not to use it for fp_as_gp optimization.
+ 6. This function is a vararg function.
+ DO NOT apply fp_as_gp optimization on this function
+ because it may change and break stack frame.
+ 7. The epilogue is empty.
+ This happens when the function uses exit()
+ or its attribute is no_return.
+ In that case, compiler will not expand epilogue
+ so that we have no chance to output .omit_fp_end directive. */
+ if (TARGET_FORBID_FP_AS_GP
+ || lookup_attribute ("naked", DECL_ATTRIBUTES (current_function_decl))
+ || !optimize_size
+ || frame_pointer_needed
+ || NDS32_REQUIRED_CALLEE_SAVED_P (FP_REGNUM)
+ || (cfun->stdarg == 1)
+ || (find_fallthru_edge (EXIT_BLOCK_PTR->preds) == NULL))
+ return 0;
+
+ /* Now we can check the possibility of using fp_as_gp optimization. */
+ if (TARGET_FORCE_FP_AS_GP)
+ {
+ /* User explicitly issues -mforce-fp-as-gp option. */
+ df_set_regs_ever_live (FP_REGNUM, 1);
+ return 1;
+ }
+ else
+ {
+ /* In the following we are going to evaluate whether
+ it is worth to do fp_as_gp optimization. */
+ int good_gain = 0;
+ int symbol_count = 0;
+
+ int threshold;
+ rtx insn;
+
+ /* We check if there already requires prologue.
+ Note that $gp will be saved in prologue for PIC code generation.
+ After that, we can set threshold by the existence of prologue.
+ Each fp-implied instruction will gain 2-byte code size
+ from gp-aware instruction, so we have following heuristics. */
+ if (flag_pic
+ || nds32_have_prologue_p ())
+ {
+ /* Have-prologue:
+ Compiler already intends to generate prologue content,
+ so the fp_as_gp optimization will only insert
+ 'la $fp,_FP_BASE_' instruction, which will be
+ converted into 4-byte instruction at link time.
+ The threshold is "3" symbol accesses, 2 + 2 + 2 > 4. */
+ threshold = 3;
+ }
+ else
+ {
+ /* None-prologue:
+ Compiler originally does not generate prologue content,
+ so the fp_as_gp optimization will NOT ONLY insert
+ 'la $fp,_FP_BASE' instruction, but also causes
+ push/pop instructions.
+ If we are using v3push (push25/pop25),
+ the threshold is "5" symbol accesses, 5*2 > 4 + 2 + 2;
+ If we are using normal push (smw/lmw),
+ the threshold is "5+2" symbol accesses 7*2 > 4 + 4 + 4. */
+ threshold = 5 + (TARGET_V3PUSH ? 0 : 2);
+ }
+
+ /* We would like to traverse every instruction in this function.
+ So we need to have push_topmost_sequence()/pop_topmost_sequence()
+ surrounding our for-loop evaluation. */
+ push_topmost_sequence ();
+ /* Counting the insn number which the addressing mode is symbol. */
+ for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
+ {
+ if (single_set (insn) && nds32_symbol_load_store_p (insn))
+ symbol_count++;
+
+ if (symbol_count == threshold)
+ {
+ good_gain = 1;
+ break;
+ }
+ }
+ pop_topmost_sequence ();
+
+ /* Enable fp_as_gp optimization when potential gain is good enough. */
+ if (good_gain)
+ {
+ df_set_regs_ever_live (FP_REGNUM, 1);
+ return 1;
+ }
+ }
+
+ /* By default we return 0. */
+ return 0;
+}
+
+
+/* Function to generate PC relative jump table.
+ Refer to nds32.md for more details.
+
+ The following is the sample for the case that diff value
+ can be presented in '.short' size.
+
+ addi $r1, $r1, -(case_lower_bound)
+ slti $ta, $r1, (case_number)
+ beqz $ta, .L_skip_label
+
+ la $ta, .L35 ! get jump table address
+ lh $r1, [$ta + $r1 << 1] ! load symbol diff from jump table entry
+ addi $ta, $r1, $ta
+ jr5 $ta
+
+ ! jump table entry
+ L35:
+ .short .L25-.L35
+ .short .L26-.L35
+ .short .L27-.L35
+ .short .L28-.L35
+ .short .L29-.L35
+ .short .L30-.L35
+ .short .L31-.L35
+ .short .L32-.L35
+ .short .L33-.L35
+ .short .L34-.L35 */
+const char *
+nds32_output_casesi_pc_relative (rtx *operands)
+{
+ enum machine_mode mode;
+ rtx diff_vec;
+
+ diff_vec = PATTERN (next_active_insn (operands[1]));
+
+ gcc_assert (GET_CODE (diff_vec) == ADDR_DIFF_VEC);
+
+ /* Step C: "t <-- operands[1]". */
+ output_asm_insn ("la\t$ta, %l1", operands);
+
+ /* Get the mode of each element in the difference vector. */
+ mode = GET_MODE (diff_vec);
+
+ /* Step D: "z <-- (mem (plus (operands[0] << m) t))",
+ where m is 0, 1, or 2 to load address-diff value from table. */
+ switch (mode)
+ {
+ case QImode:
+ output_asm_insn ("lb\t%2, [$ta + %0 << 0]", operands);
+ break;
+ case HImode:
+ output_asm_insn ("lh\t%2, [$ta + %0 << 1]", operands);
+ break;
+ case SImode:
+ output_asm_insn ("lw\t%2, [$ta + %0 << 2]", operands);
+ break;
+ default:
+ gcc_unreachable ();
+ }
+
+ /* Step E: "t <-- z + t".
+ Add table label_ref with address-diff value to
+ obtain target case address. */
+ output_asm_insn ("add\t$ta, %2, $ta", operands);
+
+ /* Step F: jump to target with register t. */
+ if (TARGET_16_BIT)
+ return "jr5\t$ta";
+ else
+ return "jr\t$ta";
+}
+
+/* Function to generate normal jump table. */
+const char *
+nds32_output_casesi (rtx *operands)
+{
+ /* Step C: "t <-- operands[1]". */
+ output_asm_insn ("la\t$ta, %l1", operands);
+
+ /* Step D: "z <-- (mem (plus (operands[0] << 2) t))". */
+ output_asm_insn ("lw\t%2, [$ta + %0 << 2]", operands);
+
+ /* No need to perform Step E, which is only used for
+ pc relative jump table. */
+
+ /* Step F: jump to target with register z. */
+ if (TARGET_16_BIT)
+ return "jr5\t%2";
+ else
+ return "jr\t%2";
+}
+
+
+/* Function to return memory format. */
+enum nds32_16bit_address_type
+nds32_mem_format (rtx op)
+{
+ enum machine_mode mode_test;
+ int val;
+ int regno;
+
+ if (!TARGET_16_BIT)
+ return ADDRESS_NOT_16BIT_FORMAT;
+
+ mode_test = GET_MODE (op);
+
+ op = XEXP (op, 0);
+
+ /* 45 format. */
+ if (GET_CODE (op) == REG && (mode_test == SImode))
+ return ADDRESS_REG;
+
+ /* 333 format for QI/HImode. */
+ if (GET_CODE (op) == REG && (REGNO (op) < R8_REGNUM))
+ return ADDRESS_LO_REG_IMM3U;
+
+ /* post_inc 333 format. */
+ if ((GET_CODE (op) == POST_INC) && (mode_test == SImode))
+ {
+ regno = REGNO(XEXP (op, 0));
+
+ if (regno < 8)
+ return ADDRESS_POST_INC_LO_REG_IMM3U;
+ }
+
+ /* post_inc 333 format. */
+ if ((GET_CODE (op) == POST_MODIFY)
+ && (mode_test == SImode)
+ && (REG_P (XEXP (XEXP (op, 1), 0)))
+ && (CONST_INT_P (XEXP (XEXP (op, 1), 1))))
+ {
+ regno = REGNO (XEXP (XEXP (op, 1), 0));
+ val = INTVAL (XEXP (XEXP (op, 1), 1));
+ if (regno < 8 && val < 32)
+ return ADDRESS_POST_INC_LO_REG_IMM3U;
+ }
+
+ if ((GET_CODE (op) == PLUS)
+ && (GET_CODE (XEXP (op, 0)) == REG)
+ && (GET_CODE (XEXP (op, 1)) == CONST_INT))
+ {
+ val = INTVAL (XEXP (op, 1));
+
+ regno = REGNO(XEXP (op, 0));
+
+ if (regno > 7
+ && regno != SP_REGNUM
+ && regno != FP_REGNUM)
+ return ADDRESS_NOT_16BIT_FORMAT;
+
+ switch (mode_test)
+ {
+ case QImode:
+ /* 333 format. */
+ if (val >= 0 && val < 8 && regno < 8)
+ return ADDRESS_LO_REG_IMM3U;
+ break;
+
+ case HImode:
+ /* 333 format. */
+ if (val >= 0 && val < 16 && (val % 2 == 0) && regno < 8)
+ return ADDRESS_LO_REG_IMM3U;
+ break;
+
+ case SImode:
+ case SFmode:
+ case DFmode:
+ /* fp imply 37 format. */
+ if ((regno == FP_REGNUM) &&
+ (val >= 0 && val < 512 && (val % 4 == 0)))
+ return ADDRESS_FP_IMM7U;
+ /* sp imply 37 format. */
+ else if ((regno == SP_REGNUM) &&
+ (val >= 0 && val < 512 && (val % 4 == 0)))
+ return ADDRESS_SP_IMM7U;
+ /* 333 format. */
+ else if (val >= 0 && val < 32 && (val % 4 == 0) && regno < 8)
+ return ADDRESS_LO_REG_IMM3U;
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ return ADDRESS_NOT_16BIT_FORMAT;
+}
+
+/* Output 16-bit store. */
+const char *
+nds32_output_16bit_store (rtx *operands, int byte)
+{
+ char pattern[100];
+ char size;
+ rtx code = XEXP (operands[0], 0);
+
+ size = nds32_byte_to_size (byte);
+
+ switch (nds32_mem_format (operands[0]))
+ {
+ case ADDRESS_REG:
+ operands[0] = code;
+ output_asm_insn ("swi450\t%1, [%0]", operands);
+ break;
+ case ADDRESS_LO_REG_IMM3U:
+ snprintf (pattern, sizeof (pattern), "s%ci333\t%%1, %%0", size);
+ output_asm_insn (pattern, operands);
+ break;
+ case ADDRESS_POST_INC_LO_REG_IMM3U:
+ snprintf (pattern, sizeof (pattern), "s%ci333.bi\t%%1, %%0", size);
+ output_asm_insn (pattern, operands);
+ break;
+ case ADDRESS_FP_IMM7U:
+ output_asm_insn ("swi37\t%1, %0", operands);
+ break;
+ case ADDRESS_SP_IMM7U:
+ /* Get immediate value and set back to operands[1]. */
+ operands[0] = XEXP (code, 1);
+ output_asm_insn ("swi37.sp\t%1, [ + (%0)]", operands);
+ break;
+ default:
+ break;
+ }
+
+ return "";
+}
+
+/* Output 16-bit load. */
+const char *
+nds32_output_16bit_load (rtx *operands, int byte)
+{
+ char pattern[100];
+ unsigned char size;
+ rtx code = XEXP (operands[1], 0);
+
+ size = nds32_byte_to_size (byte);
+
+ switch (nds32_mem_format (operands[1]))
+ {
+ case ADDRESS_REG:
+ operands[1] = code;
+ output_asm_insn ("lwi450\t%0, [%1]", operands);
+ break;
+ case ADDRESS_LO_REG_IMM3U:
+ snprintf (pattern, sizeof (pattern), "l%ci333\t%%0, %%1", size);
+ output_asm_insn (pattern, operands);
+ break;
+ case ADDRESS_POST_INC_LO_REG_IMM3U:
+ snprintf (pattern, sizeof (pattern), "l%ci333.bi\t%%0, %%1", size);
+ output_asm_insn (pattern, operands);
+ break;
+ case ADDRESS_FP_IMM7U:
+ output_asm_insn ("lwi37\t%0, %1", operands);
+ break;
+ case ADDRESS_SP_IMM7U:
+ /* Get immediate value and set back to operands[0]. */
+ operands[1] = XEXP (code, 1);
+ output_asm_insn ("lwi37.sp\t%0, [ + (%1)]", operands);
+ break;
+ default:
+ break;
+ }
+
+ return "";
+}
+
+/* Output 32-bit store. */
+const char *
+nds32_output_32bit_store (rtx *operands, int byte)
+{
+ char pattern[100];
+ unsigned char size;
+ rtx code = XEXP (operands[0], 0);
+
+ size = nds32_byte_to_size (byte);
+
+ switch (GET_CODE (code))
+ {
+ case REG:
+ /* (mem (reg X))
+ => access location by using register,
+ use "sbi / shi / swi" */
+ snprintf (pattern, sizeof (pattern), "s%ci\t%%1, %%0", size);
+ break;
+
+ case SYMBOL_REF:
+ case CONST:
+ /* (mem (symbol_ref X))
+ (mem (const (...)))
+ => access global variables,
+ use "sbi.gp / shi.gp / swi.gp" */
+ operands[0] = XEXP (operands[0], 0);
+ snprintf (pattern, sizeof (pattern), "s%ci.gp\t%%1, [ + %%0]", size);
+ break;
+
+ case POST_INC:
+ /* (mem (post_inc reg))
+ => access location by using register which will be post increment,
+ use "sbi.bi / shi.bi / swi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "s%ci.bi\t%%1, %%0, %d", size, byte);
+ break;
+
+ case POST_DEC:
+ /* (mem (post_dec reg))
+ => access location by using register which will be post decrement,
+ use "sbi.bi / shi.bi / swi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "s%ci.bi\t%%1, %%0, -%d", size, byte);
+ break;
+
+ case POST_MODIFY:
+ switch (GET_CODE (XEXP (XEXP (code, 1), 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (post_modify (reg) (plus (reg) (reg))))
+ => access location by using register which will be
+ post modified with reg,
+ use "sb.bi/ sh.bi / sw.bi" */
+ snprintf (pattern, sizeof (pattern), "s%c.bi\t%%1, %%0", size);
+ break;
+ case CONST_INT:
+ /* (mem (post_modify (reg) (plus (reg) (const_int))))
+ => access location by using register which will be
+ post modified with const_int,
+ use "sbi.bi/ shi.bi / swi.bi" */
+ snprintf (pattern, sizeof (pattern), "s%ci.bi\t%%1, %%0", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case PLUS:
+ switch (GET_CODE (XEXP (code, 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (plus reg reg)) or (mem (plus (mult reg const_int) reg))
+ => access location by adding two registers,
+ use "sb / sh / sw" */
+ snprintf (pattern, sizeof (pattern), "s%c\t%%1, %%0", size);
+ break;
+ case CONST_INT:
+ /* (mem (plus reg const_int))
+ => access location by adding one register with const_int,
+ use "sbi / shi / swi" */
+ snprintf (pattern, sizeof (pattern), "s%ci\t%%1, %%0", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case LO_SUM:
+ operands[2] = XEXP (code, 1);
+ operands[0] = XEXP (code, 0);
+ snprintf (pattern, sizeof (pattern),
+ "s%ci\t%%1, [%%0 + lo12(%%2)]", size);
+ break;
+
+ default:
+ abort ();
+ }
+
+ output_asm_insn (pattern, operands);
+ return "";
+}
+
+/* Output 32-bit load. */
+const char *
+nds32_output_32bit_load (rtx *operands, int byte)
+{
+ char pattern[100];
+ unsigned char size;
+ rtx code;
+
+ code = XEXP (operands[1], 0);
+
+ size = nds32_byte_to_size (byte);
+
+ switch (GET_CODE (code))
+ {
+ case REG:
+ /* (mem (reg X))
+ => access location by using register,
+ use "lbi / lhi / lwi" */
+ snprintf (pattern, sizeof (pattern), "l%ci\t%%0, %%1", size);
+ break;
+
+ case SYMBOL_REF:
+ case CONST:
+ /* (mem (symbol_ref X))
+ (mem (const (...)))
+ => access global variables,
+ use "lbi.gp / lhi.gp / lwi.gp" */
+ operands[1] = XEXP (operands[1], 0);
+ snprintf (pattern, sizeof (pattern), "l%ci.gp\t%%0, [ + %%1]", size);
+ break;
+
+ case POST_INC:
+ /* (mem (post_inc reg))
+ => access location by using register which will be post increment,
+ use "lbi.bi / lhi.bi / lwi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "l%ci.bi\t%%0, %%1, %d", size, byte);
+ break;
+
+ case POST_DEC:
+ /* (mem (post_dec reg))
+ => access location by using register which will be post decrement,
+ use "lbi.bi / lhi.bi / lwi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "l%ci.bi\t%%0, %%1, -%d", size, byte);
+ break;
+
+ case POST_MODIFY:
+ switch (GET_CODE (XEXP (XEXP (code, 1), 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (post_modify (reg) (plus (reg) (reg))))
+ => access location by using register which will be
+ post modified with reg,
+ use "lb.bi/ lh.bi / lw.bi" */
+ snprintf (pattern, sizeof (pattern), "l%c.bi\t%%0, %%1", size);
+ break;
+ case CONST_INT:
+ /* (mem (post_modify (reg) (plus (reg) (const_int))))
+ => access location by using register which will be
+ post modified with const_int,
+ use "lbi.bi/ lhi.bi / lwi.bi" */
+ snprintf (pattern, sizeof (pattern), "l%ci.bi\t%%0, %%1", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case PLUS:
+ switch (GET_CODE (XEXP (code, 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (plus reg reg)) or (mem (plus (mult reg const_int) reg))
+ use "lb / lh / lw" */
+ snprintf (pattern, sizeof (pattern), "l%c\t%%0, %%1", size);
+ break;
+ case CONST_INT:
+ /* (mem (plus reg const_int))
+ => access location by adding one register with const_int,
+ use "lbi / lhi / lwi" */
+ snprintf (pattern, sizeof (pattern), "l%ci\t%%0, %%1", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case LO_SUM:
+ operands[2] = XEXP (code, 1);
+ operands[1] = XEXP (code, 0);
+ snprintf (pattern, sizeof (pattern),
+ "l%ci\t%%0, [%%1 + lo12(%%2)]", size);
+ break;
+
+ default:
+ abort ();
+ }
+
+ output_asm_insn (pattern, operands);
+ return "";
+}
+
+/* Output 32-bit load with signed extension. */
+const char *
+nds32_output_32bit_load_s (rtx *operands, int byte)
+{
+ char pattern[100];
+ unsigned char size;
+ rtx code;
+
+ code = XEXP (operands[1], 0);
+
+ size = nds32_byte_to_size (byte);
+
+ switch (GET_CODE (code))
+ {
+ case REG:
+ /* (mem (reg X))
+ => access location by using register,
+ use "lbsi / lhsi" */
+ snprintf (pattern, sizeof (pattern), "l%csi\t%%0, %%1", size);
+ break;
+
+ case SYMBOL_REF:
+ case CONST:
+ /* (mem (symbol_ref X))
+ (mem (const (...)))
+ => access global variables,
+ use "lbsi.gp / lhsi.gp" */
+ operands[1] = XEXP (operands[1], 0);
+ snprintf (pattern, sizeof (pattern), "l%csi.gp\t%%0, [ + %%1]", size);
+ break;
+
+ case POST_INC:
+ /* (mem (post_inc reg))
+ => access location by using register which will be post increment,
+ use "lbsi.bi / lhsi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "l%csi.bi\t%%0, %%1, %d", size, byte);
+ break;
+
+ case POST_DEC:
+ /* (mem (post_dec reg))
+ => access location by using register which will be post decrement,
+ use "lbsi.bi / lhsi.bi" */
+ snprintf (pattern, sizeof (pattern),
+ "l%csi.bi\t%%0, %%1, -%d", size, byte);
+ break;
+
+ case POST_MODIFY:
+ switch (GET_CODE (XEXP (XEXP (code, 1), 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (post_modify (reg) (plus (reg) (reg))))
+ => access location by using register which will be
+ post modified with reg,
+ use "lbs.bi/ lhs.bi" */
+ snprintf (pattern, sizeof (pattern), "l%cs.bi\t%%0, %%1", size);
+ break;
+ case CONST_INT:
+ /* (mem (post_modify (reg) (plus (reg) (const_int))))
+ => access location by using register which will be
+ post modified with const_int,
+ use "lbsi.bi/ lhsi.bi" */
+ snprintf (pattern, sizeof (pattern), "l%csi.bi\t%%0, %%1", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case PLUS:
+ switch (GET_CODE (XEXP (code, 1)))
+ {
+ case REG:
+ case SUBREG:
+ /* (mem (plus reg reg)) or (mem (plus (mult reg const_int) reg))
+ use "lbs / lhs" */
+ snprintf (pattern, sizeof (pattern), "l%cs\t%%0, %%1", size);
+ break;
+ case CONST_INT:
+ /* (mem (plus reg const_int))
+ => access location by adding one register with const_int,
+ use "lbsi / lhsi" */
+ snprintf (pattern, sizeof (pattern), "l%csi\t%%0, %%1", size);
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case LO_SUM:
+ operands[2] = XEXP (code, 1);
+ operands[1] = XEXP (code, 0);
+ snprintf (pattern, sizeof (pattern),
+ "l%csi\t%%0, [%%1 + lo12(%%2)]", size);
+ break;
+
+ default:
+ abort ();
+ }
+
+ output_asm_insn (pattern, operands);
+ return "";
+}
+
+/* Function to output stack push operation.
+ We need to deal with normal stack push multiple or stack v3push. */
+const char *
+nds32_output_stack_push ()
+{
+ /* A string pattern for output_asm_insn(). */
+ char pattern[100];
+ /* The operands array which will be used in output_asm_insn(). */
+ rtx operands[3];
+ /* Pick up callee-saved first regno and last regno for further use. */
+ int rb_regno = cfun->machine->callee_saved_regs_first_regno;
+ int re_regno = cfun->machine->callee_saved_regs_last_regno;
+
+ if (TARGET_V3PUSH)
+ {
+ /* For stack v3push:
+ operands[0]: Re
+ operands[1]: imm8u */
+
+ /* This variable is to check if 'push25 Re,imm8u' is available. */
+ int sp_adjust;
+
+ /* Set operands[0]. */
+ operands[0] = gen_rtx_REG (SImode, re_regno);
+
+ /* Check if we can generate 'push25 Re,imm8u',
+ otherwise, generate 'push25 Re,0'. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+ if (satisfies_constraint_Iu08 (GEN_INT (sp_adjust))
+ && NDS32_DOUBLE_WORD_ALIGN_P (sp_adjust))
+ operands[1] = GEN_INT (sp_adjust);
+ else
+ operands[1] = GEN_INT (0);
+
+ /* Create assembly code pattern. */
+ snprintf (pattern, sizeof (pattern), "push25\t%%0, %%1");
+ }
+ else
+ {
+ /* For normal stack push multiple:
+ operands[0]: Rb
+ operands[1]: Re
+ operands[2]: En4 */
+
+ /* This variable is used to check if we only need to generate En4 field.
+ As long as Rb==Re=SP_REGNUM, we set this variable to 1. */
+ int push_en4_only_p = 0;
+
+ /* Set operands[0] and operands[1]. */
+ operands[0] = gen_rtx_REG (SImode, rb_regno);
+ operands[1] = gen_rtx_REG (SImode, re_regno);
+
+ /* 'smw.adm $sp,[$sp],$sp,0' means push nothing. */
+ if (!cfun->machine->fp_size
+ && !cfun->machine->gp_size
+ && !cfun->machine->lp_size
+ && REGNO (operands[0]) == SP_REGNUM
+ && REGNO (operands[1]) == SP_REGNUM)
+ {
+ /* No need to generate instruction. */
+ return "";
+ }
+ else
+ {
+ /* If Rb==Re=SP_REGNUM, we only need to generate En4 field. */
+ if (REGNO (operands[0]) == SP_REGNUM
+ && REGNO (operands[1]) == SP_REGNUM)
+ push_en4_only_p = 1;
+
+ /* Create assembly code pattern.
+ We need to handle the form: "Rb, Re, { $fp $gp $lp }". */
+ snprintf (pattern, sizeof (pattern),
+ "push.s\t%s{%s%s%s }",
+ push_en4_only_p ? "" : "%0, %1, ",
+ cfun->machine->fp_size ? " $fp" : "",
+ cfun->machine->gp_size ? " $gp" : "",
+ cfun->machine->lp_size ? " $lp" : "");
+ }
+ }
+
+ /* We use output_asm_insn() to output assembly code by ourself. */
+ output_asm_insn (pattern, operands);
+ return "";
+}
+
+/* Function to output stack pop operation.
+ We need to deal with normal stack pop multiple or stack v3pop. */
+const char *
+nds32_output_stack_pop ()
+{
+ /* A string pattern for output_asm_insn(). */
+ char pattern[100];
+ /* The operands array which will be used in output_asm_insn(). */
+ rtx operands[3];
+ /* Pick up callee-saved first regno and last regno for further use. */
+ int rb_regno = cfun->machine->callee_saved_regs_first_regno;
+ int re_regno = cfun->machine->callee_saved_regs_last_regno;
+
+ if (TARGET_V3PUSH)
+ {
+ /* For stack v3pop:
+ operands[0]: Re
+ operands[1]: imm8u */
+
+ /* This variable is to check if 'pop25 Re,imm8u' is available. */
+ int sp_adjust;
+
+ /* Set operands[0]. */
+ operands[0] = gen_rtx_REG (SImode, re_regno);
+
+ /* Check if we can generate 'pop25 Re,imm8u',
+ otherwise, generate 'pop25 Re,0'.
+ We have to consider alloca issue as well.
+ If the function does call alloca(), the stack pointer is not fixed.
+ In that case, we cannot use 'pop25 Re,imm8u' directly.
+ We have to caculate stack pointer from frame pointer
+ and then use 'pop25 Re,0'. */
+ sp_adjust = cfun->machine->local_size
+ + cfun->machine->out_args_size
+ + cfun->machine->callee_saved_area_padding_bytes;
+ if (satisfies_constraint_Iu08 (GEN_INT (sp_adjust))
+ && NDS32_DOUBLE_WORD_ALIGN_P (sp_adjust)
+ && !cfun->calls_alloca)
+ operands[1] = GEN_INT (sp_adjust);
+ else
+ operands[1] = GEN_INT (0);
+
+ /* Create assembly code pattern. */
+ snprintf (pattern, sizeof (pattern), "pop25\t%%0, %%1");
+ }
+ else
+ {
+ /* For normal stack pop multiple:
+ operands[0]: Rb
+ operands[1]: Re
+ operands[2]: En4 */
+
+ /* This variable is used to check if we only need to generate En4 field.
+ As long as Rb==Re=SP_REGNUM, we set this variable to 1. */
+ int pop_en4_only_p = 0;
+
+ /* Set operands[0] and operands[1]. */
+ operands[0] = gen_rtx_REG (SImode, rb_regno);
+ operands[1] = gen_rtx_REG (SImode, re_regno);
+
+ /* 'lmw.bim $sp,[$sp],$sp,0' means pop nothing. */
+ if (!cfun->machine->fp_size
+ && !cfun->machine->gp_size
+ && !cfun->machine->lp_size
+ && REGNO (operands[0]) == SP_REGNUM
+ && REGNO (operands[1]) == SP_REGNUM)
+ {
+ /* No need to generate instruction. */
+ return "";
+ }
+ else
+ {
+ /* If Rb==Re=SP_REGNUM, we only need to generate En4 field. */
+ if (REGNO (operands[0]) == SP_REGNUM
+ && REGNO (operands[1]) == SP_REGNUM)
+ pop_en4_only_p = 1;
+
+ /* Create assembly code pattern.
+ We need to handle the form: "Rb, Re, { $fp $gp $lp }". */
+ snprintf (pattern, sizeof (pattern),
+ "pop.s\t%s{%s%s%s }",
+ pop_en4_only_p ? "" : "%0, %1, ",
+ cfun->machine->fp_size ? " $fp" : "",
+ cfun->machine->gp_size ? " $gp" : "",
+ cfun->machine->lp_size ? " $lp" : "");
+ }
+ }
+
+ /* We use output_asm_insn() to output assembly code by ourself. */
+ output_asm_insn (pattern, operands);
+ return "";
+}
+
+/* Return align 2 (log base 2) if the next instruction of LABEL is 4 byte. */
+int
+nds32_target_alignment (rtx label)
+{
+ rtx insn;
+
+ if (optimize_size)
+ return 0;
+
+ insn = next_active_insn (label);
+
+ if (insn == 0)
+ return 0;
+ else if ((get_attr_length (insn) % 4) == 0)
+ return 2;
+ else
+ return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* PART 5: Initialize target hook structure and definitions. */
+
+/* Controlling the Compilation Driver. */
+
+
+/* Run-time Target Specification. */
+
+
+/* Defining Data Structures for Per-function Information. */
+
+
+/* Storage Layout. */
+
+#undef TARGET_PROMOTE_FUNCTION_MODE
+#define TARGET_PROMOTE_FUNCTION_MODE \
+ default_promote_function_mode_always_promote
+
+
+/* Layout of Source Language Data Types. */
+
+
+/* Register Usage. */
+
+/* -- Basic Characteristics of Registers. */
+
+/* -- Order of Allocation of Registers. */
+
+/* -- How Values Fit in Registers. */
+
+/* -- Handling Leaf Functions. */
+
+/* -- Registers That Form a Stack. */
+
+
+/* Register Classes. */
+
+#undef TARGET_CLASS_MAX_NREGS
+#define TARGET_CLASS_MAX_NREGS nds32_class_max_nregs
+
+#undef TARGET_LRA_P
+#define TARGET_LRA_P hook_bool_void_true
+
+#undef TARGET_REGISTER_PRIORITY
+#define TARGET_REGISTER_PRIORITY nds32_register_priority
+
+
+/* Obsolete Macros for Defining Constraints. */
+
+
+/* Stack Layout and Calling Conventions. */
+
+/* -- Basic Stack Layout. */
+
+/* -- Exception Handling Support. */
+
+/* -- Specifying How Stack Checking is Done. */
+
+/* -- Registers That Address the Stack Frame. */
+
+/* -- Eliminating Frame Pointer and Arg Pointer. */
+
+#undef TARGET_CAN_ELIMINATE
+#define TARGET_CAN_ELIMINATE nds32_can_eliminate
+
+/* -- Passing Function Arguments on the Stack. */
+
+/* -- Passing Arguments in Registers. */
+
+#undef TARGET_FUNCTION_ARG
+#define TARGET_FUNCTION_ARG nds32_function_arg
+
+#undef TARGET_FUNCTION_ARG_ADVANCE
+#define TARGET_FUNCTION_ARG_ADVANCE nds32_function_arg_advance
+
+#undef TARGET_FUNCTION_ARG_BOUNDARY
+#define TARGET_FUNCTION_ARG_BOUNDARY nds32_function_arg_boundary
+
+/* -- How Scalar Function Values Are Returned. */
+
+#undef TARGET_FUNCTION_VALUE
+#define TARGET_FUNCTION_VALUE nds32_function_value
+
+#undef TARGET_LIBCALL_VALUE
+#define TARGET_LIBCALL_VALUE nds32_libcall_value
+
+#undef TARGET_FUNCTION_VALUE_REGNO_P
+#define TARGET_FUNCTION_VALUE_REGNO_P nds32_function_value_regno_p
+
+/* -- How Large Values Are Returned. */
+
+/* -- Caller-Saves Register Allocation. */
+
+/* -- Function Entry and Exit. */
+
+#undef TARGET_ASM_FUNCTION_PROLOGUE
+#define TARGET_ASM_FUNCTION_PROLOGUE nds32_asm_function_prologue
+
+#undef TARGET_ASM_FUNCTION_END_PROLOGUE
+#define TARGET_ASM_FUNCTION_END_PROLOGUE nds32_asm_function_end_prologue
+
+#undef TARGET_ASM_FUNCTION_BEGIN_EPILOGUE
+#define TARGET_ASM_FUNCTION_BEGIN_EPILOGUE nds32_asm_function_begin_epilogue
+
+#undef TARGET_ASM_FUNCTION_EPILOGUE
+#define TARGET_ASM_FUNCTION_EPILOGUE nds32_asm_function_epilogue
+
+#undef TARGET_ASM_OUTPUT_MI_THUNK
+#define TARGET_ASM_OUTPUT_MI_THUNK nds32_asm_output_mi_thunk
+
+#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
+#define TARGET_ASM_CAN_OUTPUT_MI_THUNK default_can_output_mi_thunk_no_vcall
+
+/* -- Generating Code for Profiling. */
+
+/* -- Permitting tail calls. */
+
+#undef TARGET_WARN_FUNC_RETURN
+#define TARGET_WARN_FUNC_RETURN nds32_warn_func_return
+
+/* Stack smashing protection. */
+
+
+/* Implementing the Varargs Macros. */
+
+#undef TARGET_STRICT_ARGUMENT_NAMING
+#define TARGET_STRICT_ARGUMENT_NAMING nds32_strict_argument_naming
+
+
+/* Trampolines for Nested Functions. */
+
+#undef TARGET_ASM_TRAMPOLINE_TEMPLATE
+#define TARGET_ASM_TRAMPOLINE_TEMPLATE nds32_asm_trampoline_template
+
+#undef TARGET_TRAMPOLINE_INIT
+#define TARGET_TRAMPOLINE_INIT nds32_trampoline_init
+
+
+/* Implicit Calls to Library Routines. */
+
+
+/* Addressing Modes. */
+
+#undef TARGET_LEGITIMATE_ADDRESS_P
+#define TARGET_LEGITIMATE_ADDRESS_P nds32_legitimate_address_p
+
+
+/* Anchored Addresses. */
+
+
+/* Condition Code Status. */
+
+/* -- Representation of condition codes using (cc0). */
+
+/* -- Representation of condition codes using registers. */
+
+/* -- Macros to control conditional execution. */
+
+
+/* Describing Relative Costs of Operations. */
+
+#undef TARGET_REGISTER_MOVE_COST
+#define TARGET_REGISTER_MOVE_COST nds32_register_move_cost
+
+#undef TARGET_MEMORY_MOVE_COST
+#define TARGET_MEMORY_MOVE_COST nds32_memory_move_cost
+
+#undef TARGET_RTX_COSTS
+#define TARGET_RTX_COSTS nds32_rtx_costs
+
+#undef TARGET_ADDRESS_COST
+#define TARGET_ADDRESS_COST nds32_address_cost
+
+
+/* Adjusting the Instruction Scheduler. */
+
+
+/* Dividing the Output into Sections (Texts, Data, . . . ). */
+
+
+/* Position Independent Code. */
+
+
+/* Defining the Output Assembler Language. */
+
+/* -- The Overall Framework of an Assembler File. */
+
+#undef TARGET_ASM_FILE_START
+#define TARGET_ASM_FILE_START nds32_asm_file_start
+#undef TARGET_ASM_FILE_END
+#define TARGET_ASM_FILE_END nds32_asm_file_end
+
+/* -- Output of Data. */
+
+#undef TARGET_ASM_ALIGNED_HI_OP
+#define TARGET_ASM_ALIGNED_HI_OP "\t.hword\t"
+
+#undef TARGET_ASM_ALIGNED_SI_OP
+#define TARGET_ASM_ALIGNED_SI_OP "\t.word\t"
+
+/* -- Output of Uninitialized Variables. */
+
+/* -- Output and Generation of Labels. */
+
+#undef TARGET_ASM_GLOBALIZE_LABEL
+#define TARGET_ASM_GLOBALIZE_LABEL nds32_asm_globalize_label
+
+/* -- How Initialization Functions Are Handled. */
+
+/* -- Macros Controlling Initialization Routines. */
+
+/* -- Output of Assembler Instructions. */
+
+#undef TARGET_PRINT_OPERAND
+#define TARGET_PRINT_OPERAND nds32_print_operand
+#undef TARGET_PRINT_OPERAND_ADDRESS
+#define TARGET_PRINT_OPERAND_ADDRESS nds32_print_operand_address
+
+/* -- Output of Dispatch Tables. */
+
+/* -- Assembler Commands for Exception Regions. */
+
+/* -- Assembler Commands for Alignment. */
+
+
+/* Controlling Debugging Information Format. */
+
+/* -- Macros Affecting All Debugging Formats. */
+
+/* -- Specific Options for DBX Output. */
+
+/* -- Open-Ended Hooks for DBX Format. */
+
+/* -- File Names in DBX Format. */
+
+/* -- Macros for SDB and DWARF Output. */
+
+/* -- Macros for VMS Debug Format. */
+
+
+/* Cross Compilation and Floating Point. */
+
+
+/* Mode Switching Instructions. */
+
+
+/* Defining target-specific uses of __attribute__. */
+
+#undef TARGET_ATTRIBUTE_TABLE
+#define TARGET_ATTRIBUTE_TABLE nds32_attribute_table
+
+#undef TARGET_MERGE_DECL_ATTRIBUTES
+#define TARGET_MERGE_DECL_ATTRIBUTES nds32_merge_decl_attributes
+
+#undef TARGET_INSERT_ATTRIBUTES
+#define TARGET_INSERT_ATTRIBUTES nds32_insert_attributes
+
+#undef TARGET_OPTION_PRAGMA_PARSE
+#define TARGET_OPTION_PRAGMA_PARSE nds32_option_pragma_parse
+
+#undef TARGET_OPTION_OVERRIDE
+#define TARGET_OPTION_OVERRIDE nds32_option_override
+
+
+/* Emulating TLS. */
+
+
+/* Defining coprocessor specifics for MIPS targets. */
+
+
+/* Parameters for Precompiled Header Validity Checking. */
+
+
+/* C++ ABI parameters. */
+
+
+/* Adding support for named address spaces. */
+
+
+/* Miscellaneous Parameters. */
+
+#undef TARGET_INIT_BUILTINS
+#define TARGET_INIT_BUILTINS nds32_init_builtins
+
+#undef TARGET_EXPAND_BUILTIN
+#define TARGET_EXPAND_BUILTIN nds32_expand_builtin
+
+
+/* ------------------------------------------------------------------------ */
+
+/* Initialize the GCC target structure. */
+
+struct gcc_target targetm = TARGET_INITIALIZER;
+
+/* ------------------------------------------------------------------------ */
new file mode 100644
@@ -0,0 +1,982 @@
+/* Definitions of target machine of Andes NDS32 cpu for GNU compiler
+ Copyright (C) 2012-2013 Free Software Foundation, Inc.
+ Contributed by Andes Technology Corporation.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+
+/* ------------------------------------------------------------------------ */
+
+/* The following are auxiliary macros or structure declarations
+ that are used all over the nds32.c and nds32.h. */
+
+
+/* Computing the Length of an Insn. */
+#define ADJUST_INSN_LENGTH(INSN, LENGTH) \
+ (LENGTH = nds32_adjust_insn_length (INSN, LENGTH))
+
+/* Check instruction LS-37-FP-implied form.
+ Note: actually its immediate range is imm9u
+ since it is used for lwi37/swi37 instructions. */
+#define NDS32_LS_37_FP_P(rt, ra, imm) \
+ (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ && REGNO (ra) == FP_REGNUM \
+ && satisfies_constraint_Iu09 (imm))
+
+/* Check instruction LS-37-SP-implied form.
+ Note: actually its immediate range is imm9u
+ since it is used for lwi37/swi37 instructions. */
+#define NDS32_LS_37_SP_P(rt, ra, imm) \
+ (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ && REGNO (ra) == SP_REGNUM \
+ && satisfies_constraint_Iu09 (imm))
+
+
+/* Check load/store instruction form : Rt3, Ra3, imm3u. */
+#define NDS32_LS_333_P(rt, ra, imm, mode) nds32_ls_333_p (rt, ra, imm, mode)
+
+/* Check load/store instruction form : Rt4, Ra5, const_int_0.
+ Note: no need to check ra because Ra5 means it covers all registers. */
+#define NDS32_LS_450_P(rt, ra, imm) \
+ ((imm == const0_rtx) \
+ && (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ || REGNO_REG_CLASS (REGNO (rt)) == MIDDLE_REGS))
+
+/* Check instruction RRI-333-form. */
+#define NDS32_RRI_333_P(rt, ra, imm) \
+ (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ && REGNO_REG_CLASS (REGNO (ra)) == LOW_REGS \
+ && satisfies_constraint_Iu03 (imm))
+
+/* Check instruction RI-45-form. */
+#define NDS32_RI_45_P(rt, ra, imm) \
+ (REGNO (rt) == REGNO (ra) \
+ && (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ || REGNO_REG_CLASS (REGNO (rt)) == MIDDLE_REGS) \
+ && satisfies_constraint_Iu05 (imm))
+
+
+/* Check instruction RR-33-form. */
+#define NDS32_RR_33_P(rt, ra) \
+ (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ && REGNO_REG_CLASS (REGNO (ra)) == LOW_REGS)
+
+/* Check instruction RRR-333-form. */
+#define NDS32_RRR_333_P(rt, ra, rb) \
+ (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ && REGNO_REG_CLASS (REGNO (ra)) == LOW_REGS \
+ && REGNO_REG_CLASS (REGNO (rb)) == LOW_REGS)
+
+/* Check instruction RR-45-form.
+ Note: no need to check rb because Rb5 means it covers all registers. */
+#define NDS32_RR_45_P(rt, ra, rb) \
+ (REGNO (rt) == REGNO (ra) \
+ && (REGNO_REG_CLASS (REGNO (rt)) == LOW_REGS \
+ || REGNO_REG_CLASS (REGNO (rt)) == MIDDLE_REGS))
+
+/* Classifies address type to distinguish 16-bit/32-bit format. */
+enum nds32_16bit_address_type
+{
+ /* [reg]: 45 format address. */
+ ADDRESS_REG,
+ /* [lo_reg + imm3u]: 333 format address. */
+ ADDRESS_LO_REG_IMM3U,
+ /* post_inc [lo_reg + imm3u]: 333 format address. */
+ ADDRESS_POST_INC_LO_REG_IMM3U,
+ /* [$fp + imm7u]: fp imply address. */
+ ADDRESS_FP_IMM7U,
+ /* [$sp + imm7u]: sp imply address. */
+ ADDRESS_SP_IMM7U,
+ /* Other address format. */
+ ADDRESS_NOT_16BIT_FORMAT
+};
+
+
+/* ------------------------------------------------------------------------ */
+
+/* Define maximum numbers of registers for passing arguments. */
+#define NDS32_MAX_REGS_FOR_ARGS 6
+
+/* Define the register number for first argument. */
+#define NDS32_GPR_ARG_FIRST_REGNUM 0
+
+/* Define the register number for return value. */
+#define NDS32_GPR_RET_FIRST_REGNUM 0
+
+
+/* Define double word alignment bits. */
+#define NDS32_DOUBLE_WORD_ALIGNMENT 64
+
+/* Define alignment checking macros for convenience. */
+#define NDS32_HALF_WORD_ALIGN_P(value) (((value) & 0x01) == 0)
+#define NDS32_SINGLE_WORD_ALIGN_P(value) (((value) & 0x03) == 0)
+#define NDS32_DOUBLE_WORD_ALIGN_P(value) (((value) & 0x07) == 0)
+
+/* Round X up to the nearest double word. */
+#define NDS32_ROUND_UP_DOUBLE_WORD(value) (((value) + 7) & ~7)
+
+
+/* This macro is used to calculate the numbers of registers for
+ containing 'size' bytes of the argument.
+ The size of a register is a word in nds32 target.
+ So we use UNITS_PER_WORD to do the calculation. */
+#define NDS32_NEED_N_REGS_FOR_ARG(mode, type) \
+ ((mode == BLKmode) \
+ ? ((int_size_in_bytes (type) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) \
+ : ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
+
+/* This macro is used to return the register number for passing argument.
+ We need to obey the following rules:
+ 1. If it is required MORE THAN one register,
+ make sure the register number is a even value.
+ 2. If it is required ONLY one register,
+ the register number can be odd or even value. */
+#define NDS32_AVAILABLE_REGNUM_FOR_ARG(reg_offset, mode, type) \
+ ((NDS32_NEED_N_REGS_FOR_ARG (mode, type) > 1) \
+ ? (((reg_offset) + NDS32_GPR_ARG_FIRST_REGNUM + 1) & ~1) \
+ : ((reg_offset) + NDS32_GPR_ARG_FIRST_REGNUM))
+
+/* This macro is to check if there are still available registers
+ for passing argument. */
+#define NDS32_ARG_PASS_IN_REG_P(reg_offset, mode, type) \
+ (((reg_offset) < NDS32_MAX_REGS_FOR_ARGS) \
+ && ((reg_offset) + NDS32_NEED_N_REGS_FOR_ARG (mode, type) \
+ <= NDS32_MAX_REGS_FOR_ARGS))
+
+/* This macro is to check if the register is required to be saved on stack.
+ If call_used_regs[regno] == 0, regno is the callee-saved register.
+ If df_regs_ever_live_p(regno) == true, it is used in the current function.
+ As long as the register satisfies both criteria above,
+ it is required to be saved. */
+#define NDS32_REQUIRED_CALLEE_SAVED_P(regno) \
+ ((!call_used_regs[regno]) && (df_regs_ever_live_p (regno)))
+
+/* ------------------------------------------------------------------------ */
+
+/* A C structure for machine-specific, per-function data.
+ This is added to the cfun structure. */
+struct GTY(()) machine_function
+{
+ /* Number of bytes allocated on the stack for variadic args
+ if we want to push them into stack as pretend arguments by ourself. */
+ int va_args_size;
+ /* Number of bytes reserved on the stack for
+ local and temporary variables. */
+ int local_size;
+ /* Number of bytes allocated on the stack for outgoing arguments. */
+ int out_args_size;
+
+ /* Number of bytes on the stack for saving $fp. */
+ int fp_size;
+ /* Number of bytes on the stack for saving $gp. */
+ int gp_size;
+ /* Number of bytes on the stack for saving $lp. */
+ int lp_size;
+
+ /* Number of bytes on the stack for saving callee-saved registers. */
+ int callee_saved_regs_size;
+ /* The padding bytes in callee-saved area may be required. */
+ int callee_saved_area_padding_bytes;
+
+ /* The first required register that should be saved on stack
+ for va_args (one named argument + nameless arguments). */
+ int va_args_first_regno;
+ /* The last required register that should be saved on stack
+ for va_args (one named argument + nameless arguments). */
+ int va_args_last_regno;
+
+ /* The first required callee-saved register. */
+ int callee_saved_regs_first_regno;
+ /* The last required callee-saved register. */
+ int callee_saved_regs_last_regno;
+
+ /* Indicate that whether this function needs
+ prologue/epilogue code generation. */
+ int naked_p;
+ /* Indicate that whether this function
+ uses fp_as_gp optimization. */
+ int fp_as_gp_p;
+};
+
+/* A C structure that contains the arguments information. */
+typedef struct
+{
+ unsigned int reg_offset;
+} nds32_cumulative_args;
+
+/* ------------------------------------------------------------------------ */
+
+/* The following we define C-ISR related stuff.
+ In nds32 architecture, we have 73 vectors for interrupt/exception.
+ For each vector (except for vector 0, which is used for reset behavior),
+ we allow users to set its register saving scheme and interrupt level. */
+
+/* There are 73 vectors in nds32 architecture.
+ 0 for reset handler,
+ 1-8 for exception handler,
+ and 9-72 for interrupt handler.
+ We use an array, which is defined in nds32.c, to record
+ essential information for each vector. */
+#define NDS32_N_ISR_VECTORS 73
+
+/* Define possible isr category. */
+enum nds32_isr_category
+{
+ NDS32_ISR_NONE,
+ NDS32_ISR_INTERRUPT,
+ NDS32_ISR_EXCEPTION,
+ NDS32_ISR_RESET
+};
+
+/* Define isr register saving scheme. */
+enum nds32_isr_save_reg
+{
+ NDS32_SAVE_ALL,
+ NDS32_PARTIAL_SAVE
+};
+
+/* Define isr nested type. */
+enum nds32_isr_nested_type
+{
+ NDS32_NESTED,
+ NDS32_NOT_NESTED,
+ NDS32_NESTED_READY
+};
+
+/* Define structure to record isr information.
+ The isr vector array 'isr_vectors[]' with this structure
+ is defined in nds32.c. */
+struct nds32_isr_info
+{
+ /* The field to identify isr category.
+ It should be set to NDS32_ISR_NONE by default.
+ If user specifies a function as isr by using attribute,
+ this field will be set accordingly. */
+ enum nds32_isr_category category;
+
+ /* A string for the applied function name.
+ It should be set to empty string by default. */
+ char func_name[100];
+
+ /* The register saving scheme.
+ It should be set to NDS32_PARTIAL_SAVE by default
+ unless user specifies attribute to change it. */
+ enum nds32_isr_save_reg save_reg;
+
+ /* The nested type.
+ It should be set to NDS32_NOT_NESTED by default
+ unless user specifies attribute to change it. */
+ enum nds32_isr_nested_type nested_type;
+
+ /* Total vectors.
+ The total vectors = interrupt + exception numbers + reset.
+ It should be set to 0 by default.
+ This field is ONLY used in NDS32_ISR_RESET category. */
+ unsigned int total_n_vectors;
+
+ /* A string for nmi handler name.
+ It should be set to empty string by default.
+ This field is ONLY used in NDS32_ISR_RESET category. */
+ char nmi_name[100];
+
+ /* A string for warm handler name.
+ It should be set to empty string by default.
+ This field is ONLY used in NDS32_ISR_RESET category. */
+ char warm_name[100];
+};
+
+/* ------------------------------------------------------------------------ */
+
+/* Define code for all nds32 builtins. */
+enum nds32_builtins
+{
+ NDS32_BUILTIN_ISYNC,
+ NDS32_BUILTIN_ISB,
+ NDS32_BUILTIN_MFSR,
+ NDS32_BUILTIN_MFUSR,
+ NDS32_BUILTIN_MTSR,
+ NDS32_BUILTIN_MTUSR,
+ NDS32_BUILTIN_SETGIE_EN,
+ NDS32_BUILTIN_SETGIE_DIS
+};
+
+/* ------------------------------------------------------------------------ */
+
+#define TARGET_ISA_V2 (nds32_arch_option == ARCH_V2)
+#define TARGET_ISA_V3 (nds32_arch_option == ARCH_V3)
+#define TARGET_ISA_V3M (nds32_arch_option == ARCH_V3M)
+
+/* ------------------------------------------------------------------------ */
+
+/* Controlling the Compilation Driver. */
+
+#define OPTION_DEFAULT_SPECS \
+ {"arch", "%{!march=*:-march=%(VALUE)}" }
+
+#define CC1_SPEC \
+ ""
+
+#define ASM_SPEC \
+ " %{mbig-endian:-EB} %{mlittle-endian:-EL}"
+
+/* If user issues -mrelax, -mforce-fp-as-gp, or -mex9,
+ we need to pass '--relax' to linker.
+ Besides, for -mex9, we need to further pass '--mex9'. */
+#define LINK_SPEC \
+ " %{mbig-endian:-EB} %{mlittle-endian:-EL}" \
+ " %{mrelax|mforce-fp-as-gp|mex9:--relax}" \
+ " %{mex9:--mex9}"
+
+#define LIB_SPEC \
+ " -lc -lgloss"
+
+/* The option -mno-ctor-dtor can disable constructor/destructor feature
+ by applying different crt stuff. In the convention, crt0.o is the
+ startup file without constructor/destructor;
+ crt1.o, crti.o, crtbegin.o, crtend.o, and crtn.o are the
+ startup files with constructor/destructor.
+ Note that crt0.o, crt1.o, crti.o, and crtn.o are provided
+ by newlib/mculib/glibc/ublic, while crtbegin.o and crtend.o are
+ currently provided by GCC for nds32 target.
+
+ For nds32 target so far:
+ If -mno-ctor-dtor, we are going to link
+ "crt0.o [user objects]".
+ If general cases, we are going to link
+ "crt1.o crtbegin1.o [user objects] crtend1.o". */
+#define STARTFILE_SPEC \
+ " %{!mno-ctor-dtor:crt1.o%s;:crt0.o%s}" \
+ " %{!mno-ctor-dtor:crtbegin1.o%s}"
+#define ENDFILE_SPEC \
+ " %{!mno-ctor-dtor:crtend1.o%s}"
+
+/* The TARGET_BIG_ENDIAN_DEFAULT is defined if we configure gcc
+ with --target=nds32be-* setting.
+ Check gcc/config.gcc for more information.
+ In addition, currently we only have elf toolchain,
+ where mgp-direct is always the default. */
+#ifdef TARGET_BIG_ENDIAN_DEFAULT
+#define MULTILIB_DEFAULTS { "mbig-endian", "mgp-direct" }
+#else
+#define MULTILIB_DEFAULTS { "mlittle-endian", "mgp-direct" }
+#endif
+
+
+/* Run-time Target Specification. */
+
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define ("__nds32__"); \
+ \
+ if (TARGET_ISA_V2) \
+ builtin_define ("__NDS32_ISA_V2__"); \
+ if (TARGET_ISA_V3) \
+ builtin_define ("__NDS32_ISA_V3__"); \
+ if (TARGET_ISA_V3M) \
+ builtin_define ("__NDS32_ISA_V3M__"); \
+ \
+ if (TARGET_BIG_ENDIAN) \
+ builtin_define ("__big_endian__"); \
+ if (TARGET_REDUCED_REGS) \
+ builtin_define ("__NDS32_REDUCED_REGS__"); \
+ if (TARGET_CMOV) \
+ builtin_define ("__NDS32_CMOV__"); \
+ if (TARGET_PERF_EXT) \
+ builtin_define ("__NDS32_PERF_EXT__"); \
+ if (TARGET_16_BIT) \
+ builtin_define ("__NDS32_16_BIT__"); \
+ if (TARGET_GP_DIRECT) \
+ builtin_define ("__NDS32_GP_DIRECT__"); \
+ \
+ builtin_assert ("cpu=nds32"); \
+ builtin_assert ("machine=nds32"); \
+ } while (0)
+
+
+/* Defining Data Structures for Per-function Information. */
+
+/* This macro is called once per function,
+ before generation of any RTL has begun. */
+#define INIT_EXPANDERS nds32_init_expanders ()
+
+
+/* Storage Layout. */
+
+#define BITS_BIG_ENDIAN 0
+
+#define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN)
+
+#define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN)
+
+#define UNITS_PER_WORD 4
+
+#define PROMOTE_MODE(m, unsignedp, type) \
+ if (GET_MODE_CLASS (m) == MODE_INT && GET_MODE_SIZE (m) < UNITS_PER_WORD) \
+ { \
+ (m) = SImode; \
+ }
+
+#define PARM_BOUNDARY 32
+
+#define STACK_BOUNDARY 64
+
+#define FUNCTION_BOUNDARY 32
+
+#define BIGGEST_ALIGNMENT 64
+
+#define EMPTY_FIELD_BOUNDARY 32
+
+#define STRUCTURE_SIZE_BOUNDARY 8
+
+#define STRICT_ALIGNMENT 1
+
+#define PCC_BITFIELD_TYPE_MATTERS 1
+
+
+/* Layout of Source Language Data Types. */
+
+#define INT_TYPE_SIZE 32
+#define SHORT_TYPE_SIZE 16
+#define LONG_TYPE_SIZE 32
+#define LONG_LONG_TYPE_SIZE 64
+
+#define FLOAT_TYPE_SIZE 32
+#define DOUBLE_TYPE_SIZE 64
+#define LONG_DOUBLE_TYPE_SIZE 64
+
+#define DEFAULT_SIGNED_CHAR 1
+
+#define SIZE_TYPE "long unsigned int"
+#define PTRDIFF_TYPE "long int"
+#define WCHAR_TYPE "short unsigned int"
+#define WCHAR_TYPE_SIZE 16
+
+
+/* Register Usage. */
+
+/* Number of actual hardware registers.
+ The hardware registers are assigned numbers for the compiler
+ from 0 to just below FIRST_PSEUDO_REGISTER.
+ All registers that the compiler knows about must be given numbers,
+ even those that are not normally considered general registers. */
+#define FIRST_PSEUDO_REGISTER 34
+
+/* An initializer that says which registers are used for fixed
+ purposes all throughout the compiled code and are therefore
+ not available for general allocation.
+
+ $r28 : $fp
+ $r29 : $gp
+ $r30 : $lp
+ $r31 : $sp
+
+ caller-save registers: $r0 ~ $r5, $r16 ~ $r23
+ callee-save registers: $r6 ~ $r10, $r11 ~ $r14
+
+ reserved for assembler : $r15
+ reserved for other use : $r24, $r25, $r26, $r27 */
+#define FIXED_REGISTERS \
+{ /* r0 r1 r2 r3 r4 r5 r6 r7 */ \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ /* r8 r9 r10 r11 r12 r13 r14 r15 */ \
+ 0, 0, 0, 0, 0, 0, 0, 1, \
+ /* r16 r17 r18 r19 r20 r21 r22 r23 */ \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ /* r24 r25 r26 r27 r28 r29 r30 r31 */ \
+ 1, 1, 1, 1, 0, 1, 0, 1, \
+ /* ARG_POINTER:32 */ \
+ 1, \
+ /* FRAME_POINTER:33 */ \
+ 1 \
+}
+
+/* Identifies the registers that are not available for
+ general allocation of values that must live across
+ function calls -- so they are caller-save registers.
+
+ 0 : callee-save registers
+ 1 : caller-save registers */
+#define CALL_USED_REGISTERS \
+{ /* r0 r1 r2 r3 r4 r5 r6 r7 */ \
+ 1, 1, 1, 1, 1, 1, 0, 0, \
+ /* r8 r9 r10 r11 r12 r13 r14 r15 */ \
+ 0, 0, 0, 0, 0, 0, 0, 1, \
+ /* r16 r17 r18 r19 r20 r21 r22 r23 */ \
+ 1, 1, 1, 1, 1, 1, 1, 1, \
+ /* r24 r25 r26 r27 r28 r29 r30 r31 */ \
+ 1, 1, 1, 1, 0, 1, 0, 1, \
+ /* ARG_POINTER:32 */ \
+ 1, \
+ /* FRAME_POINTER:33 */ \
+ 1 \
+}
+
+/* In nds32 target, we have three levels of registers:
+ LOW_COST_REGS : $r0 ~ $r7
+ MIDDLE_COST_REGS : $r8 ~ $r11, $r16 ~ $r19
+ HIGH_COST_REGS : $r12 ~ $r14, $r20 ~ $r31 */
+#define REG_ALLOC_ORDER \
+{ \
+ 0, 1, 2, 3, 4, 5, 6, 7, \
+ 8, 9, 10, 11, 16, 17, 18, 19, \
+ 12, 13, 14, 15, 20, 21, 22, 23, \
+ 24, 25, 26, 27, 28, 29, 30, 31, \
+ 32, \
+ 33 \
+}
+
+/* Tell IRA to use the order we define rather than messing it up with its
+ own cost calculations. */
+#define HONOR_REG_ALLOC_ORDER
+
+/* The number of consecutive hard regs needed starting at
+ reg "regno" for holding a value of mode "mode". */
+#define HARD_REGNO_NREGS(regno, mode) nds32_hard_regno_nregs (regno, mode)
+
+/* Value is 1 if hard register "regno" can hold a value
+ of machine-mode "mode". */
+#define HARD_REGNO_MODE_OK(regno, mode) nds32_hard_regno_mode_ok (regno, mode)
+
+/* A C expression that is nonzero if a value of mode1
+ is accessible in mode2 without copying.
+ Define this macro to return nonzero in as many cases as possible
+ since doing so will allow GCC to perform better register allocation.
+ We can use general registers to tie QI/HI/SI modes together. */
+#define MODES_TIEABLE_P(mode1, mode2) \
+ (GET_MODE_CLASS (mode1) == MODE_INT \
+ && GET_MODE_CLASS (mode2) == MODE_INT \
+ && GET_MODE_SIZE (mode1) <= UNITS_PER_WORD \
+ && GET_MODE_SIZE (mode2) <= UNITS_PER_WORD)
+
+
+/* Register Classes. */
+
+/* In nds32 target, we have three levels of registers:
+ Low cost regsiters : $r0 ~ $r7
+ Middle cost registers : $r8 ~ $r11, $r16 ~ $r19
+ High cost registers : $r12 ~ $r14, $r20 ~ $r31
+
+ In practice, we have MIDDLE_REGS cover LOW_REGS register class contents
+ so that it provides more chance to use low cost registers. */
+enum reg_class
+{
+ NO_REGS,
+ R15_TA_REG,
+ STACK_REG,
+ LOW_REGS,
+ MIDDLE_REGS,
+ HIGH_REGS,
+ GENERAL_REGS,
+ FRAME_REGS,
+ ALL_REGS,
+ LIM_REG_CLASSES
+};
+
+#define N_REG_CLASSES (int) LIM_REG_CLASSES
+
+#define REG_CLASS_NAMES \
+{ \
+ "NO_REGS", \
+ "R15_TA_REG", \
+ "STACK_REG", \
+ "LOW_REGS", \
+ "MIDDLE_REGS", \
+ "HIGH_REGS", \
+ "GENERAL_REGS", \
+ "FRAME_REGS", \
+ "ALL_REGS" \
+}
+
+#define REG_CLASS_CONTENTS \
+{ \
+ {0x00000000, 0x00000000}, /* NO_REGS : */ \
+ {0x00008000, 0x00000000}, /* R15_TA_REG : 15 */ \
+ {0x80000000, 0x00000000}, /* STACK_REG : 31 */ \
+ {0x000000ff, 0x00000000}, /* LOW_REGS : 0-7 */ \
+ {0x000f0fff, 0x00000000}, /* MIDDLE_REGS : 0-11, 16-19 */ \
+ {0xfff07000, 0x00000000}, /* HIGH_REGS : 12-14, 20-31 */ \
+ {0xffffffff, 0x00000000}, /* GENERAL_REGS: 0-31 */ \
+ {0x00000000, 0x00000003}, /* FRAME_REGS : 32, 33 */ \
+ {0xffffffff, 0x00000003} /* ALL_REGS : 0-31, 32, 33 */ \
+}
+
+#define REGNO_REG_CLASS(regno) nds32_regno_reg_class (regno)
+
+#define BASE_REG_CLASS GENERAL_REGS
+#define INDEX_REG_CLASS GENERAL_REGS
+
+/* Return nonzero if it is suitable for use as a
+ base register in operand addresses.
+ So far, we return nonzero only if "num" is a hard reg
+ of the suitable class or a pseudo register which is
+ allocated to a suitable hard reg. */
+#define REGNO_OK_FOR_BASE_P(num) \
+ ((num) < 32 || (unsigned) reg_renumber[num] < 32)
+
+/* Return nonzero if it is suitable for use as a
+ index register in operand addresses.
+ So far, we return nonzero only if "num" is a hard reg
+ of the suitable class or a pseudo register which is
+ allocated to a suitable hard reg.
+ The difference between an index register and a base register is that
+ the index register may be scaled. */
+#define REGNO_OK_FOR_INDEX_P(num) \
+ ((num) < 32 || (unsigned) reg_renumber[num] < 32)
+
+
+/* Obsolete Macros for Defining Constraints. */
+
+
+/* Stack Layout and Calling Conventions. */
+
+#define STACK_GROWS_DOWNWARD
+
+#define FRAME_GROWS_DOWNWARD 1
+
+#define STARTING_FRAME_OFFSET 0
+
+#define STACK_POINTER_OFFSET 0
+
+#define FIRST_PARM_OFFSET(fundecl) 0
+
+#define RETURN_ADDR_RTX(count, frameaddr) \
+ nds32_return_addr_rtx (count, frameaddr)
+
+/* A C expression whose value is RTL representing the location
+ of the incoming return address at the beginning of any function
+ before the prologue.
+ If this RTL is REG, you should also define
+ DWARF_FRAME_RETURN_COLUMN to DWARF_FRAME_REGNUM (REGNO). */
+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LP_REGNUM)
+#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LP_REGNUM)
+
+#define STACK_POINTER_REGNUM SP_REGNUM
+
+#define FRAME_POINTER_REGNUM 33
+
+#define HARD_FRAME_POINTER_REGNUM FP_REGNUM
+
+#define ARG_POINTER_REGNUM 32
+
+#define STATIC_CHAIN_REGNUM 16
+
+#define ELIMINABLE_REGS \
+{ { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
+ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }, \
+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
+ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM } }
+
+#define INITIAL_ELIMINATION_OFFSET(from_reg, to_reg, offset_var) \
+ (offset_var) = nds32_initial_elimination_offset (from_reg, to_reg)
+
+#define ACCUMULATE_OUTGOING_ARGS 1
+
+#define OUTGOING_REG_PARM_STACK_SPACE(fntype) 1
+
+#define CUMULATIVE_ARGS nds32_cumulative_args
+
+#define INIT_CUMULATIVE_ARGS(cum, fntype, libname, fndecl, n_named_args) \
+ nds32_init_cumulative_args (&cum, fntype, libname, fndecl, n_named_args)
+
+/* The REGNO is an unsigned integer but NDS32_GPR_ARG_FIRST_REGNUM may be 0.
+ We better cast REGNO into signed integer so that we can avoid
+ 'comparison of unsigned expression >= 0 is always true' warning. */
+#define FUNCTION_ARG_REGNO_P(regno) \
+ (((int) regno - NDS32_GPR_ARG_FIRST_REGNUM >= 0) \
+ && ((int) regno - NDS32_GPR_ARG_FIRST_REGNUM < NDS32_MAX_REGS_FOR_ARGS))
+
+#define DEFAULT_PCC_STRUCT_RETURN 0
+
+/* EXIT_IGNORE_STACK should be nonzero if, when returning
+ from a function, the stack pointer does not matter.
+ The value is tested only in functions that have frame pointers.
+ In nds32 target, the function epilogue recovers the
+ stack pointer from the frame. */
+#define EXIT_IGNORE_STACK 1
+
+#define FUNCTION_PROFILER(file, labelno) \
+ fprintf (file, "/* profiler %d */", (labelno))
+
+
+/* Implementing the Varargs Macros. */
+
+
+/* Trampolines for Nested Functions. */
+
+/* Giving A-function and B-function,
+ if B-function wants to call A-function's nested function,
+ we need to fill trampoline code into A-function's stack
+ so that B-function can execute the code in stack to indirectly
+ jump to (like 'trampoline' action) desired nested function.
+
+ The trampoline code for nds32 target must contains following parts:
+
+ 1. instructions (4 * 4 = 16 bytes):
+ get $pc first
+ load chain_value to static chain register via $pc
+ load nested function address to $r15 via $pc
+ jump to desired nested function via $r15
+ 2. data (4 * 2 = 8 bytes):
+ chain_value
+ nested function address
+
+ Please check nds32.c implementation for more information. */
+#define TRAMPOLINE_SIZE 24
+
+/* Because all instructions/data in trampoline template are 4-byte size,
+ we set trampoline alignment 8*4=32 bits. */
+#define TRAMPOLINE_ALIGNMENT 32
+
+
+/* Implicit Calls to Library Routines. */
+
+
+/* Addressing Modes. */
+
+/* We can use "LWI.bi Rt, [Ra], 4" to support post increment. */
+#define HAVE_POST_INCREMENT 1
+/* We can use "LWI.bi Rt, [Ra], -4" to support post decrement. */
+#define HAVE_POST_DECREMENT 1
+
+/* We have "LWI.bi Rt, [Ra], imm" instruction form. */
+#define HAVE_POST_MODIFY_DISP 1
+/* We have "LW.bi Rt, [Ra], Rb" instruction form. */
+#define HAVE_POST_MODIFY_REG 1
+
+#define CONSTANT_ADDRESS_P(x) (CONSTANT_P (x) && GET_CODE (x) != CONST_DOUBLE)
+
+#define MAX_REGS_PER_ADDRESS 2
+
+
+/* Anchored Addresses. */
+
+
+/* Condition Code Status. */
+
+
+/* Describing Relative Costs of Operations. */
+
+/* A C expression for the cost of a branch instruction.
+ A value of 1 is the default;
+ other values are interpreted relative to that. */
+#define BRANCH_COST(speed_p, predictable_p) ((speed_p) ? 2 : 0)
+
+#define SLOW_BYTE_ACCESS 1
+
+#define NO_FUNCTION_CSE
+
+
+/* Adjusting the Instruction Scheduler. */
+
+
+/* Dividing the Output into Sections (Texts, Data, . . . ). */
+
+#define TEXT_SECTION_ASM_OP "\t.text"
+#define DATA_SECTION_ASM_OP "\t.data"
+
+/* Currently, nds32 assembler does NOT handle '.bss' pseudo-op.
+ So we use '.section .bss' alternatively. */
+#define BSS_SECTION_ASM_OP "\t.section\t.bss"
+
+/* Define this macro to be an expression with a nonzero value if jump tables
+ (for tablejump insns) should be output in the text section,
+ along with the assembler instructions.
+ Otherwise, the readonly data section is used. */
+#define JUMP_TABLES_IN_TEXT_SECTION 1
+
+
+/* Position Independent Code. */
+
+
+/* Defining the Output Assembler Language. */
+
+#define ASM_COMMENT_START "!"
+
+#define ASM_APP_ON "! #APP"
+
+#define ASM_APP_OFF "! #NO_APP\n"
+
+#define ASM_OUTPUT_LABELREF(stream, name) \
+ asm_fprintf (stream, "%U%s", (*targetm.strip_name_encoding) (name))
+
+#define ASM_OUTPUT_SYMBOL_REF(stream, sym) \
+ assemble_name (stream, XSTR (sym, 0))
+
+#define ASM_OUTPUT_LABEL_REF(stream, buf) \
+ assemble_name (stream, buf)
+
+#define LOCAL_LABEL_PREFIX "."
+
+#define REGISTER_NAMES \
+{ \
+ "$r0", "$r1", "$r2", "$r3", "$r4", "$r5", "$r6", "$r7", \
+ "$r8", "$r9", "$r10", "$r11", "$r12", "$r13", "$r14", "$ta", \
+ "$r16", "$r17", "$r18", "$r19", "$r20", "$r21", "$r22", "$r23", \
+ "$r24", "$r25", "$r26", "$r27", "$fp", "$gp", "$lp", "$sp", \
+ "$AP", \
+ "$SFP" \
+}
+
+/* Output normal jump table entry. */
+#define ASM_OUTPUT_ADDR_VEC_ELT(stream, value) \
+ asm_fprintf (stream, "\t.word\t%LL%d\n", value)
+
+/* Output pc relative jump table entry. */
+#define ASM_OUTPUT_ADDR_DIFF_ELT(stream, body, value, rel) \
+ do \
+ { \
+ switch (GET_MODE (body)) \
+ { \
+ case QImode: \
+ asm_fprintf (stream, "\t.byte\t.L%d-.L%d\n", value, rel); \
+ break; \
+ case HImode: \
+ asm_fprintf (stream, "\t.short\t.L%d-.L%d\n", value, rel); \
+ break; \
+ case SImode: \
+ asm_fprintf (stream, "\t.word\t.L%d-.L%d\n", value, rel); \
+ break; \
+ default: \
+ gcc_unreachable(); \
+ } \
+ } while (0)
+
+/* We have to undef it first because elfos.h formerly define it
+ check gcc/config.gcc and gcc/config/elfos.h for more information. */
+#undef ASM_OUTPUT_CASE_LABEL
+#define ASM_OUTPUT_CASE_LABEL(stream, prefix, num, table) \
+ do \
+ { \
+ asm_fprintf (stream, "\t! Jump Table Begin\n"); \
+ (*targetm.asm_out.internal_label) (stream, prefix, num); \
+ } while (0)
+
+#define ASM_OUTPUT_CASE_END(stream, num, table) \
+ do \
+ { \
+ /* Because our jump table is in text section, \
+ we need to make sure 2-byte alignment after \
+ the jump table for instructions fetch. */ \
+ if (GET_MODE (PATTERN (table)) == QImode) \
+ ASM_OUTPUT_ALIGN (stream, 1); \
+ asm_fprintf (stream, "\t! Jump Table End\n"); \
+ } while (0)
+
+/* This macro is not documented yet.
+ But we do need it to make jump table vector aligned. */
+#define ADDR_VEC_ALIGN(JUMPTABLE) 2
+
+#define DWARF2_UNWIND_INFO 1
+
+#define JUMP_ALIGN(x) \
+ (align_jumps_log ? align_jumps_log : nds32_target_alignment (x))
+
+#define LOOP_ALIGN(x) \
+ (align_loops_log ? align_loops_log : nds32_target_alignment (x))
+
+#define LABEL_ALIGN(x) \
+ (align_labels_log ? align_labels_log : nds32_target_alignment (x))
+
+#define ASM_OUTPUT_ALIGN(stream, power) \
+ fprintf (stream, "\t.align\t%d\n", power)
+
+
+/* Controlling Debugging Information Format. */
+
+#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
+
+#define DWARF2_DEBUGGING_INFO 1
+
+#define DWARF2_ASM_LINE_DEBUG_INFO 1
+
+
+/* Cross Compilation and Floating Point. */
+
+
+/* Mode Switching Instructions. */
+
+
+/* Defining target-specific uses of __attribute__. */
+
+
+/* Emulating TLS. */
+
+
+/* Defining coprocessor specifics for MIPS targets. */
+
+
+/* Parameters for Precompiled Header Validity Checking. */
+
+
+/* C++ ABI parameters. */
+
+
+/* Adding support for named address spaces. */
+
+
+/* Miscellaneous Parameters. */
+
+/* This is the machine mode that elements of a jump-table should have. */
+#define CASE_VECTOR_MODE Pmode
+
+/* Return the preferred mode for and addr_diff_vec when the mininum
+ and maximum offset are known. */
+#define CASE_VECTOR_SHORTEN_MODE(min_offset, max_offset, body) \
+ ((min_offset < 0 || max_offset >= 0x2000 ) ? SImode \
+ : (max_offset >= 100) ? HImode \
+ : QImode)
+
+/* Generate pc relative jump table when -fpic or -Os. */
+#define CASE_VECTOR_PC_RELATIVE (flag_pic || optimize_size)
+
+/* Define this macro if operations between registers with integral mode
+ smaller than a word are always performed on the entire register. */
+#define WORD_REGISTER_OPERATIONS
+
+/* A C expression indicating when insns that read memory in mem_mode,
+ an integral mode narrower than a word, set the bits outside of mem_mode
+ to be either the sign-extension or the zero-extension of the data read. */
+#define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
+
+/* The maximum number of bytes that a single instruction can move quickly
+ between memory and registers or between two memory locations. */
+#define MOVE_MAX 4
+
+/* A C expression that is nonzero if on this machine the number of bits
+ actually used for the count of a shift operation is equal to the number
+ of bits needed to represent the size of the object being shifted. */
+#define SHIFT_COUNT_TRUNCATED 1
+
+/* A C expression which is nonzero if on this machine it is safe to "convert"
+ an integer of 'inprec' bits to one of 'outprec' bits by merely operating
+ on it as if it had only 'outprec' bits. */
+#define TRULY_NOOP_TRUNCATION(outprec, inprec) 1
+
+/* A C expression describing the value returned by a comparison operator with
+ an integral mode and stored by a store-flag instruction ('cstoremode4')
+ when the condition is true. */
+#define STORE_FLAG_VALUE 1
+
+/* An alias for the machine mode for pointers. */
+#define Pmode SImode
+
+/* An alias for the machine mode used for memory references to functions
+ being called, in call RTL expressions. */
+#define FUNCTION_MODE SImode
+
+/* ------------------------------------------------------------------------ */