Patchwork [U-Boot,v3,3/3] config: remove platform CONFIG_SYS_HZ definition part 2/2

login
register
mail settings
Submitter Rob Herring
Date Oct. 4, 2013, 1:40 p.m.
Message ID <1380894005-18769-4-git-send-email-robherring2@gmail.com>
Download mbox | patch
Permalink /patch/280628/
State Accepted
Delegated to: Tom Rini
Headers show

Comments

Rob Herring - Oct. 4, 2013, 1:40 p.m.
From: Rob Herring <rob.herring@calxeda.com>

Remove platform CONFIG_SYS_HZ definition for configs a-z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
v3:
- new patch split out from patch 1

 arch/arm/include/asm/arch-lpc32xx/config.h | 3 ---
 arch/blackfin/include/asm/config.h         | 7 -------
 include/configs/a320evb.h                  | 1 -
 include/configs/a3m071.h                   | 1 -
 include/configs/a4m072.h                   | 2 --
 include/configs/ac14xx.h                   | 3 ---
 include/configs/actux1.h                   | 1 -
 include/configs/actux2.h                   | 1 -
 include/configs/actux3.h                   | 1 -
 include/configs/actux4.h                   | 1 -
 include/configs/adp-ag101.h                | 6 ------
 include/configs/adp-ag101p.h               | 6 ------
 include/configs/adp-ag102.h                | 6 ------
 include/configs/aev.h                      | 2 --
 include/configs/afeb9260.h                 | 1 -
 include/configs/alpr.h                     | 2 --
 include/configs/am3517_crane.h             | 1 -
 include/configs/am3517_evm.h               | 1 -
 include/configs/am43xx_evm.h               | 1 -
 include/configs/amcc-common.h              | 2 --
 include/configs/ap325rxa.h                 | 1 -
 include/configs/ap_sh4a_4a.h               | 1 -
 include/configs/aria.h                     | 2 --
 include/configs/armadillo-800eva.h         | 1 -
 include/configs/arndale.h                  | 2 --
 include/configs/astro_mcf5373l.h           | 2 --
 include/configs/at91rm9200ek.h             | 1 -
 include/configs/at91sam9260ek.h            | 1 -
 include/configs/at91sam9261ek.h            | 1 -
 include/configs/at91sam9263ek.h            | 1 -
 include/configs/at91sam9m10g45ek.h         | 1 -
 include/configs/at91sam9n12ek.h            | 1 -
 include/configs/at91sam9rlek.h             | 1 -
 include/configs/at91sam9x5ek.h             | 1 -
 include/configs/atc.h                      | 2 --
 include/configs/atngw100.h                 | 2 --
 include/configs/atngw100mkii.h             | 6 ------
 include/configs/atstk1002.h                | 6 ------
 include/configs/atstk1003.h                | 6 ------
 include/configs/atstk1004.h                | 6 ------
 include/configs/atstk1006.h                | 5 -----
 include/configs/calimain.h                 | 1 -
 include/configs/cam_enc_4xx.h              | 1 -
 include/configs/canmb.h                    | 2 --
 include/configs/cgtqmx6eval.h              | 1 -
 include/configs/cm4008.h                   | 2 --
 include/configs/cm41xx.h                   | 2 --
 include/configs/cm5200.h                   | 1 -
 include/configs/cm_t35.h                   | 1 -
 include/configs/cmi_mpc5xx.h               | 2 --
 include/configs/cobra5272.h                | 2 --
 include/configs/cogent_mpc8260.h           | 2 --
 include/configs/cogent_mpc8xx.h            | 2 --
 include/configs/colibri_pxa270.h           | 1 -
 include/configs/controlcenterd.h           | 1 -
 include/configs/coreboot.h                 | 1 -
 include/configs/corenet_ds.h               | 1 -
 include/configs/cpci5200.h                 | 2 --
 include/configs/cpu9260.h                  | 1 -
 include/configs/cpuat91.h                  | 1 -
 include/configs/csb272.h                   | 2 --
 include/configs/csb472.h                   | 1 -
 include/configs/da830evm.h                 | 1 -
 include/configs/da850evm.h                 | 1 -
 include/configs/davinci_dm355evm.h         | 1 -
 include/configs/davinci_dm355leopard.h     | 1 -
 include/configs/davinci_dm365evm.h         | 1 -
 include/configs/davinci_dm6467evm.h        | 1 -
 include/configs/davinci_dvevm.h            | 1 -
 include/configs/davinci_schmoogie.h        | 1 -
 include/configs/davinci_sffsdr.h           | 1 -
 include/configs/davinci_sonata.h           | 1 -
 include/configs/dbau1x00.h                 | 2 --
 include/configs/debris.h                   | 1 -
 include/configs/devkit8000.h               | 1 -
 include/configs/dig297.h                   | 1 -
 include/configs/digsy_mtc.h                | 2 --
 include/configs/dvlhost.h                  | 1 -
 include/configs/eXalion.h                  | 1 -
 include/configs/ea20.h                     | 1 -
 include/configs/eb_cpu5282.h               | 1 -
 include/configs/eb_cpux9k2.h               | 1 -
 include/configs/ecovec.h                   | 1 -
 include/configs/edminiv2.h                 | 2 --
 include/configs/enbw_cmc.h                 | 1 -
 include/configs/ep8248.h                   | 2 --
 include/configs/ep8260.h                   | 2 --
 include/configs/ep82xxm.h                  | 2 --
 include/configs/espt.h                     | 1 -
 include/configs/ethernut5.h                | 1 -
 include/configs/exynos5250-dt.h            | 2 --
 include/configs/favr-32-ezkit.h            | 6 ------
 include/configs/flea3.h                    | 2 --
 include/configs/galaxy5200.h               | 1 -
 include/configs/gr_cpci_ax2000.h           | 2 --
 include/configs/gr_ep2s60.h                | 2 --
 include/configs/gr_xc3s_1500.h             | 2 --
 include/configs/grasshopper.h              | 6 ------
 include/configs/grsim.h                    | 2 --
 include/configs/grsim_leon2.h              | 2 --
 include/configs/gw8260.h                   | 1 -
 include/configs/h2200.h                    | 2 --
 include/configs/hammerhead.h               | 2 --
 include/configs/hawkboard.h                | 1 -
 include/configs/hermes.h                   | 2 --
 include/configs/highbank.h                 | 2 --
 include/configs/hmi1001.h                  | 2 --
 include/configs/hymod.h                    | 2 --
 include/configs/igep0033.h                 | 1 -
 include/configs/igep00x0.h                 | 1 -
 include/configs/ima3-mx53.h                | 1 -
 include/configs/imx27lite-common.h         | 1 -
 include/configs/imx31_litekit.h            | 2 --
 include/configs/imx31_phycore.h            | 2 --
 include/configs/incaip.h                   | 2 --
 include/configs/inka4x0.h                  | 2 --
 include/configs/integrator-common.h        | 1 -
 include/configs/ipam390.h                  | 1 -
 include/configs/ipek01.h                   | 1 -
 include/configs/jadecpu.h                  | 1 -
 include/configs/jornada.h                  | 1 -
 include/configs/jupiter.h                  | 2 --
 include/configs/km/keymile-common.h        | 2 --
 include/configs/korat.h                    | 2 --
 include/configs/kvme080.h                  | 1 -
 include/configs/kzm9g.h                    | 2 --
 include/configs/linkstation.h              | 1 -
 include/configs/lp8x4x.h                   | 5 -----
 include/configs/lubbock.h                  | 1 -
 include/configs/lwmon.h                    | 2 --
 include/configs/lwmon5.h                   | 2 --
 include/configs/m53evk.h                   | 1 -
 include/configs/manroland/mpc5200-common.h | 2 --
 include/configs/mcc200.h                   | 2 --
 include/configs/mcx.h                      | 1 -
 include/configs/mecp5123.h                 | 2 --
 include/configs/mecp5200.h                 | 2 --
 include/configs/meesc.h                    | 1 -
 include/configs/microblaze-generic.h       | 1 -
 include/configs/mimc200.h                  | 2 --
 include/configs/motionpro.h                | 2 --
 include/configs/mpc5121ads.h               | 1 -
 include/configs/mpc7448hpc2.h              | 2 --
 include/configs/mpc8308_p1m.h              | 1 -
 include/configs/mpq101.h                   | 1 -
 include/configs/mpr2.h                     | 1 -
 include/configs/ms7720se.h                 | 1 -
 include/configs/ms7722se.h                 | 1 -
 include/configs/ms7750se.h                 | 1 -
 include/configs/muas3001.h                 | 2 --
 include/configs/munices.h                  | 1 -
 include/configs/mv-common.h                | 1 -
 include/configs/mx1ads.h                   | 1 -
 include/configs/mx25pdk.h                  | 1 -
 include/configs/mx31ads.h                  | 2 --
 include/configs/mx31pdk.h                  | 2 --
 include/configs/mx35pdk.h                  | 2 --
 include/configs/mx51_efikamx.h             | 1 -
 include/configs/mx51evk.h                  | 1 -
 include/configs/mx53ard.h                  | 1 -
 include/configs/mx53evk.h                  | 1 -
 include/configs/mx53loco.h                 | 1 -
 include/configs/mx53smd.h                  | 1 -
 include/configs/mx6qarm2.h                 | 1 -
 include/configs/mx6sabre_common.h          | 1 -
 include/configs/mx6slevk.h                 | 1 -
 include/configs/mxs.h                      | 3 ---
 include/configs/nhk8815.h                  | 1 -
 include/configs/nios2-generic.h            | 1 -
 include/configs/nitrogen6x.h               | 1 -
 include/configs/nokia_rx51.h               | 1 -
 include/configs/o2dnt-common.h             | 1 -
 include/configs/omap1510inn.h              | 1 -
 include/configs/omap3_beagle.h             | 1 -
 include/configs/omap3_evm_common.h         | 1 -
 include/configs/omap3_logic.h              | 1 -
 include/configs/omap3_mvblx.h              | 1 -
 include/configs/omap3_overo.h              | 1 -
 include/configs/omap3_pandora.h            | 1 -
 include/configs/omap3_sdp3430.h            | 1 -
 include/configs/omap3_zoom1.h              | 1 -
 include/configs/omap4_common.h             | 1 -
 include/configs/omap5912osk.h              | 1 -
 include/configs/openrisc-generic.h         | 1 -
 include/configs/origen.h                   | 2 --
 include/configs/otc570.h                   | 1 -
 include/configs/p1_p2_rdb_pc.h             | 1 -
 include/configs/p1_twr.h                   | 1 -
 include/configs/p3mx.h                     | 2 --
 include/configs/p3p440.h                   | 2 --
 include/configs/palmtreo680.h              | 1 -
 include/configs/pb1x00.h                   | 2 --
 include/configs/pcm030.h                   | 1 -
 include/configs/pcm051.h                   | 1 -
 include/configs/pcs440ep.h                 | 2 --
 include/configs/pdm360ng.h                 | 1 -
 include/configs/pdnb3.h                    | 1 -
 include/configs/pf5200.h                   | 2 --
 include/configs/pm9261.h                   | 2 --
 include/configs/pm9263.h                   | 2 --
 include/configs/pm9g45.h                   | 1 -
 include/configs/ppmc7xx.h                  | 1 -
 include/configs/ppmc8260.h                 | 1 -
 include/configs/pxa255_idp.h               | 1 -
 include/configs/qemu-malta.h               | 1 -
 include/configs/qemu-mips.h                | 2 --
 include/configs/qemu-mips64.h              | 2 --
 include/configs/qong.h                     | 2 --
 include/configs/quad100hd.h                | 2 --
 include/configs/quantum.h                  | 2 --
 include/configs/r0p7734.h                  | 1 -
 include/configs/r2dplus.h                  | 1 -
 include/configs/r7780mp.h                  | 1 -
 include/configs/rpi_b.h                    | 3 ---
 include/configs/rsdproto.h                 | 2 --
 include/configs/s5p_goni.h                 | 2 --
 include/configs/s5pc210_universal.h        | 2 --
 include/configs/sacsng.h                   | 1 -
 include/configs/sama5d3xek.h               | 1 -
 include/configs/sandbox.h                  | 2 --
 include/configs/sbc35_a9g20.h              | 1 -
 include/configs/sbc405.h                   | 2 --
 include/configs/sbc8349.h                  | 1 -
 include/configs/sbc8548.h                  | 1 -
 include/configs/sbc8641d.h                 | 1 -
 include/configs/sc3.h                      | 2 --
 include/configs/sh7752evb.h                | 1 -
 include/configs/sh7757lcr.h                | 1 -
 include/configs/sh7763rdp.h                | 1 -
 include/configs/sh7785lcr.h                | 1 -
 include/configs/shmin.h                    | 1 -
 include/configs/siemens-am33x-common.h     | 2 --
 include/configs/smdk2410.h                 | 2 --
 include/configs/smdkc100.h                 | 2 --
 include/configs/smdkv310.h                 | 2 --
 include/configs/snapper9260.h              | 1 -
 include/configs/snowball.h                 | 1 -
 include/configs/socfpga_cyclone5.h         | 1 -
 include/configs/socrates.h                 | 1 -
 include/configs/spc1920.h                  | 2 --
 include/configs/spear-common.h             | 1 -
 include/configs/spieval.h                  | 2 --
 include/configs/stamp9g20.h                | 1 -
 include/configs/stxgp3.h                   | 1 -
 include/configs/stxssa.h                   | 1 -
 include/configs/stxxtc.h                   | 2 --
 include/configs/svm_sc8xx.h                | 2 --
 include/configs/t4qds.h                    | 1 -
 include/configs/tam3517-common.h           | 1 -
 include/configs/tb0229.h                   | 2 --
 include/configs/tegra-common.h             | 2 --
 include/configs/ti814x_evm.h               | 2 --
 include/configs/ti816x_evm.h               | 1 -
 include/configs/ti_armv7_common.h          | 1 -
 include/configs/titanium.h                 | 1 -
 include/configs/tnetv107x_evm.h            | 1 -
 include/configs/tny_a9260.h                | 1 -
 include/configs/top9000.h                  | 1 -
 include/configs/trats.h                    | 2 --
 include/configs/tricorder.h                | 1 -
 include/configs/trizepsiv.h                | 1 -
 include/configs/tt01.h                     | 2 --
 include/configs/tx25.h                     | 1 -
 include/configs/u8500_href.h               | 1 -
 include/configs/uc100.h                    | 2 --
 include/configs/utx8245.h                  | 1 -
 include/configs/v37.h                      | 2 --
 include/configs/v38b.h                     | 2 --
 include/configs/vct.h                      | 1 -
 include/configs/ve8313.h                   | 1 -
 include/configs/vexpress_common.h          | 1 -
 include/configs/vf610twr.h                 | 1 -
 include/configs/virtlab2.h                 | 2 --
 include/configs/vision2.h                  | 1 -
 include/configs/vl_ma2sc.h                 | 1 -
 include/configs/vme8349.h                  | 1 -
 include/configs/vpac270.h                  | 1 -
 include/configs/wandboard.h                | 1 -
 include/configs/woodburn_common.h          | 3 ---
 include/configs/x600.h                     | 1 -
 include/configs/xaeniax.h                  | 1 -
 include/configs/xilinx-ppc.h               | 1 -
 include/configs/xpedite1000.h              | 1 -
 include/configs/xpedite517x.h              | 1 -
 include/configs/xpedite520x.h              | 1 -
 include/configs/xpedite537x.h              | 1 -
 include/configs/xpedite550x.h              | 1 -
 include/configs/zeus.h                     | 2 --
 include/configs/zmx25.h                    | 1 -
 include/configs/zynq.h                     | 1 -
 290 files changed, 454 deletions(-)

Patch

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index a46baf2..c985401 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -15,9 +15,6 @@ 
 
 #define CONFIG_NR_DRAM_BANKS_MAX	2
 
-/* 1KHz clock tick */
-#define CONFIG_SYS_HZ			1000
-
 /* UART configuration */
 #if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index d870d12..1da386e 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -155,13 +155,6 @@ 
 #ifndef CONFIG_SYS_MAXARGS
 # define CONFIG_SYS_MAXARGS 16
 #endif
-#if defined(CONFIG_SYS_HZ)
-# if (CONFIG_SYS_HZ != 1000)
-#  warning "CONFIG_SYS_HZ must always be 1000"
-# endif
-# undef CONFIG_SYS_HZ
-#endif
-#define CONFIG_SYS_HZ 1000
 
 /* Blackfin POST tests */
 #ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index bcb7ab4..0d3cf36 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -37,7 +37,6 @@ 
 /*
  * Timer
  */
-#define CONFIG_SYS_HZ		1000	/* timer ticks per second */
 
 /*
  * Real Time Clock
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 43d3d99..9e50dba 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -265,7 +265,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_LOOPW
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
 
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index d243bc1..3efd513 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -286,8 +286,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index a2090da..1205557 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -440,9 +440,6 @@ 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-/* decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 33669c2..80b8356 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -79,7 +79,6 @@ 
 
 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index 533f469..75126bc 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -72,7 +72,6 @@ 
 
 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 76b5efd..94059b6 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -70,7 +70,6 @@ 
 
 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 1df0a7c..94cb80d 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -77,7 +77,6 @@ 
 
 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66000000
-#define CONFIG_SYS_HZ				1000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000
diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h
index 81f71b9..e31131f 100644
--- a/include/configs/adp-ag101.h
+++ b/include/configs/adp-ag101.h
@@ -40,12 +40,6 @@ 
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
 
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index 48afbf4..ded3f33 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -40,12 +40,6 @@ 
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	39062500
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
 
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
index 681dfa2..1e4ce2e 100644
--- a/include/configs/adp-ag102.h
+++ b/include/configs/adp-ag102.h
@@ -32,12 +32,6 @@ 
 /*
  * Timer
  */
-
-/*
- * According to the discussion in u-boot mailing list before,
- * CONFIG_SYS_HZ at 1000 is mandatory.
- */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_CLK_FREQ	(66000000 * 2)
 #define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
 
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 6c0b034..fd44fca 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -338,8 +338,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index be2f207..a3e4fd2 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -17,7 +17,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK		32768
-#define CONFIG_SYS_HZ				1000
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 5431b09..8542764 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -255,8 +255,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC	1       /* enable mdc/mwc commands      */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 1fd2508..c5e67bf 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -239,7 +239,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6500878..5ff65c6 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -231,7 +231,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5c802a1..59846f3 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -75,7 +75,6 @@ 
 
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 580d079..ff5bac4 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -90,8 +90,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
 #define CONFIG_LOOPW			/* enable loopw command         */
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index af3a427..2be28f9 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -156,6 +156,5 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
 
 #endif	/* __AP325RXA_H */
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index b911291..e8d2650 100644
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -159,6 +159,5 @@ 
 #define CONFIG_SYS_CLK_FREQ 44444444
 #endif
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
 
 #endif	/* __AP_SH4A_4A_H */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 68f25ea..5a72fcb 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -485,8 +485,6 @@ 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h
index 9f357ea..3694340 100644
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/armadillo-800eva.h
@@ -139,6 +139,5 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	50000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
 
 #endif	/* __ARMADILLO_800EVA_H */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index ed44a04..45fa047 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -144,8 +144,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_RD_LVL
 
 #define CONFIG_NR_DRAM_BANKS	8
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index ed9400e..0a89368 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -110,10 +110,8 @@ 
 /*
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			80000000
 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE		32		/* SDRAM size in MB */
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index e158b0d..c03f385 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -43,7 +43,6 @@ 
 #define AT91C_MAIN_CLOCK		((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK		(AT91C_MAIN_CLOCK / 3 )
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ			1000
 
 /* CPU configuration */
 #define CONFIG_AT91RM9200
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index d7fd6b0..ce0ca80 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -28,7 +28,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
 
 /* Define actual evaluation board type from used processor type */
 #ifdef CONFIG_AT91SAM9G20
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index af56604..fcdf044 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -14,7 +14,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ			1000
 
 #ifdef CONFIG_AT91SAM9G10
 #define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 40e167c..5a39392 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -26,7 +26,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_AT91SAM9263EK	1	/* It's an AT91SAM9263EK Board */
 
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index fc4ecec..2095fe6 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -21,7 +21,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
 
 #define CONFIG_AT91SAM9M10G45EK
 #define CONFIG_AT91FAMILY
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 28a7925..415a997 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -24,7 +24,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
 
 /* Misc CPU related */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index b08848e..3747098 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -18,7 +18,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_AT91SAM9RLEK		1	/* It's an AT91SAM9RLEK Board */
 
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 4a2ac9a..bb126b0 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -16,7 +16,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_AT91SAM9X5EK
 #define CONFIG_AT91FAMILY
diff --git a/include/configs/atc.h b/include/configs/atc.h
index b661e95..b03b148 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -153,8 +153,6 @@ 
 
 #define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 #define	CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
 
 #define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c87e414..597bede 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -15,8 +15,6 @@ 
 #define CONFIG_AT32AP7000
 #define CONFIG_ATNGW100
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 8e4ad07..bd4dca5 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -18,12 +18,6 @@ 
 #define CONFIG_ATNGW100MKII
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
  * and the PBA bus to run at 1/4 the PLL frequency.
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 5be563c..fd76572 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -17,12 +17,6 @@ 
 #define CONFIG_ATSTK1000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index a49d0ad..2562460 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -17,12 +17,6 @@ 
 #define CONFIG_ATSTK1000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 7f3976c..8e32a10 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -17,12 +17,6 @@ 
 #define CONFIG_ATSTK1000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 97470df..9ce2264 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -16,11 +16,6 @@ 
 #define CONFIG_ATSTK1006
 #define CONFIG_ATSTK1000
 
-/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index d20074c..febee45 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -31,7 +31,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		calimain_get_osc_freq()
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x60000000
 #define CONFIG_DA850_LOWLEVEL
 #define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index db9eb0f..6f6c9b0 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -17,7 +17,6 @@ 
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM365
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_DAVINCI_DM365_EVM
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 7b90dcb..949202b 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -189,8 +189,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 5cf456a..d5db8f5 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -143,7 +143,6 @@ 
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		       1000
 
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index b401995..275024b 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -75,8 +75,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
 
-#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index d792240..458e3c4 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -75,8 +75,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
 
-#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index cfd63ad..17deafd 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -296,7 +296,6 @@ 
 #define CONFIG_LOOPW		1
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index bc5b66c..38fe064 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -258,7 +258,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index 417c873..7549a64 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -97,8 +97,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 
-#define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 885dfd4..26ccf01 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -37,11 +37,9 @@ 
 /* ---
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  * ---
  */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 4a8e583..c004651 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -139,8 +139,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index c57d702..10db636 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -104,8 +104,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_ALLOC_DPRAM
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 290a08d..00f25a5 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -101,7 +101,6 @@ 
 /*
  * Clock Configuration
  */
-#define	CONFIG_SYS_HZ			1000		/* Timer @ 3250000 Hz */
 #define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
 
 /*
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index c6aad01..92d25e0 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -440,7 +440,6 @@ 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 47215e5..e081b06 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -222,7 +222,6 @@ 
 #define CONFIG_SYS_MEMTEST_START		0x00100000
 #define CONFIG_SYS_MEMTEST_END			0x01000000
 #define CONFIG_SYS_LOAD_ADDR			0x100000
-#define CONFIG_SYS_HZ				1000
 
 /*-----------------------------------------------------------------------
  * SDRAM Configuration
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index c3fb80c..2d2a853 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -662,7 +662,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 05529c8..8a6fdcd 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -268,8 +268,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 5b79ace..021be83 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -20,7 +20,6 @@ 
 #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
 
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 
 #if defined(CONFIG_CPU9G20)
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index c56fdd7..555cc55 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -25,7 +25,6 @@ 
 #define AT91C_MAIN_CLOCK		((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK		(AT91C_MAIN_CLOCK / 3)
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_ARM920T
 #define CONFIG_AT91RM9200
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 49a144f..d64996e 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -121,8 +121,6 @@ 
 
 #define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 7705a5d..3de16f6 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -121,7 +121,6 @@ 
 #define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 3e71ae5..c4cc62e 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -28,7 +28,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index e63d7c4..503e96e 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -33,7 +33,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 
diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index 96d35c5..b75371e 100644
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -18,7 +18,6 @@ 
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM355
 
 /* Memory Info */
diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index f7adbd8..234bbc0 100644
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -17,7 +17,6 @@ 
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM355				/* DM355 based board */
 
 /* Memory Info */
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 82dc1a2..b631154 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -18,7 +18,6 @@ 
 #define CONFIG_ARM926EJS				/* arm926ejs CPU */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM365
 
 /* Memory Info */
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 7f57877..2132342 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -27,7 +27,6 @@  extern unsigned int davinci_arm_clk_get(void);
 /* Timer Input clock freq */
 #define CONFIG_SYS_HZ_CLOCK		(CONFIG_SYS_CLK_FREQ/2)
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM646X
 
 /* EEPROM definitions for EEPROM */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index a49a989..db112e7 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -44,7 +44,6 @@ 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 1595bc7..18853bd 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -22,7 +22,6 @@ 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*=============*/
 /* Memory Info */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 6ebbe81..44449df 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -19,7 +19,6 @@ 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /* EEPROM definitions for Atmel 24LC64 EEPROM chip */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 3eaa7c0..3f5ae6e 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -46,7 +46,6 @@ 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SOC_DM644X
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 07c60ab..da4ff8e 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -133,8 +133,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
 
 #define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
diff --git a/include/configs/debris.h b/include/configs/debris.h
index c9fb8d7..d74a541 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -149,7 +149,6 @@ 
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index cb79b4e..5fd9ccb 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -257,7 +257,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index 30e3908..6b3a71a 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -239,7 +239,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index a5215db..02b7f99 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -416,8 +416,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CONFIG_SYS_HZ			1000
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 1418795..3b86de2 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -78,7 +78,6 @@ 
 
 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK         66666666
-#define CONFIG_SYS_HZ			1000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 7321b60..47c180e 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -217,7 +217,6 @@ 
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2	/* for MPC8240 only		*/
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index e08423a..58e40ed 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -35,7 +35,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 #define CONFIG_DA8XX_GPIO
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 08ba883..d1650ee 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -98,7 +98,6 @@ 
 /*----------------------------------------------------------------------*
  * Clock and PLL Configuration						*
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			1000
 #define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */
 
 /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index b8e672f..cafaf88 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -60,7 +60,6 @@ 
 
 #define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
 
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 2c9594b..f84550f 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -180,6 +180,5 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ 41666666
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
 
 #endif	/* __ECOVEC_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 9c70109..8b9f66a 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -34,8 +34,6 @@ 
  * CLKs configurations
  */
 
-#define CONFIG_SYS_HZ		1000
-
 /*
  * Board-specific values for Orion5x MPP low level init:
  * - MPPs 12 to 15 are SATA LEDs (mode 5)
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 90033fa..726bbad 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -33,7 +33,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_DA850_LOWLEVEL
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_DA850_PLL_INIT
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 32d5cd6..421c066 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -154,8 +154,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index aba3392..e072e32 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -359,8 +359,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR     0x00100000   /* default load address */
 
-#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index bcf01b6..4778a01 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -165,8 +165,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/espt.h b/include/configs/espt.h
index e906efb..84377f5 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -99,7 +99,6 @@ 
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
 
 /* Ether */
 #define CONFIG_SH_ETHER 1
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index adf14be..5d33c76 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -31,7 +31,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ			1000
 
 /* 32kB internal SRAM */
 #define CONFIG_SRAM_BASE	0x00300000 /*AT91SAM9XE_SRAM_BASE */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8c21909..e7992aa 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -177,8 +177,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_RD_LVL
 
 #define CONFIG_NR_DRAM_BANKS	8
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 14f0784..fc015e6 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -18,12 +18,6 @@ 
 #define CONFIG_FAVR32_EZKIT_EXT_FLASH
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ				1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index cfcaf1b..531ace3 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -130,8 +130,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Physical Memory Map
  */
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 47e65d8..29905c2 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -352,7 +352,6 @@ 
 #define CONFIG_SYS_MEMTEST_END 0x00f00000	/* 1 ... 15 MB in DRAM */
 
 #define CONFIG_SYS_LOAD_ADDR 0x400000		/* default load address */
-#define CONFIG_SYS_HZ 1000			/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_DISPLAY_BOARDINFO 1
 
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 4f286bd..38cab12 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -304,8 +304,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index fac7f1c..ba3e45a 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -293,8 +293,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * USB stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 7f0c5be..af7ec11 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -252,8 +252,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index c288b39..938ee86 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -16,12 +16,6 @@ 
 #define CONFIG_AT32AP7000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index 6124519..9bbbded 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -279,8 +279,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 2226f5b..d387af9 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -277,8 +277,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 #define CONFIG_SYS_GRLIB_SDRAM    0
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 545fa85..dffed3e 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -352,7 +352,6 @@ 
 #define CONFIG_CLOCKS_IN_MHZ
 
 #define CONFIG_SYS_LOAD_ADDR   0x100000 /* default load address */
-#define CONFIG_SYS_HZ          1000     /* decrementer freq: 1 ms ticks */
 
 
 /* memtest works from the end of the exception vector table
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index 19ecc9a..d026484 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -17,8 +17,6 @@ 
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE		0x04000000 /* 64 MB */
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 38c70ac..3f2fadb 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -13,8 +13,6 @@ 
 #define CONFIG_AT32AP7000
 #define CONFIG_HAMMERHEAD
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 125 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index b8197ac..73e1624 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -28,7 +28,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_AIS_CONFIG_FILE		"board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index 1af5296..55a47c8 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -87,8 +87,6 @@ 
 
 #define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 #define	CONFIG_SYS_ALLOC_DPRAM		1	/* use allocation routines	*/
 /*
  * Low Level Configuration Settings
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index afb6e64..016305a 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -12,8 +12,6 @@ 
 #define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
-#define CFG_HZ				1000
-#define CONFIG_SYS_HZ			CFG_HZ
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 747c43c..475d3ff 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -237,8 +237,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index f73de68..173cfc6 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -271,8 +271,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define	CONFIG_SYS_I2C_SPEED		50000
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
index 3e18a65..2c69d4e 100644
--- a/include/configs/igep0033.h
+++ b/include/configs/igep0033.h
@@ -144,7 +144,6 @@ 
 /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 9982cf6..64f10f4 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -238,7 +238,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Physical Memory Map
diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h
index ae6828b..ad1614a 100644
--- a/include/configs/ima3-mx53.h
+++ b/include/configs/ima3-mx53.h
@@ -111,7 +111,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index cda7e0d..8236133 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -16,7 +16,6 @@ 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
-#define CONFIG_SYS_HZ		1000
 
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 30c65da..9bdfbe4 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -117,8 +117,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING	1
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 720e1bf..a7dab58 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -121,8 +121,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
 
 /*
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 0ff9a7f..7d2715d 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -106,8 +106,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(incaip_get_cpuclk() / 2)
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
 #define	CONFIG_SYS_LOAD_ADDR		0x80100000	/* default load address	*/
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 5cc686f..363f2cd 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -348,8 +348,6 @@  static inline void tws_data_config_output(unsigned output)
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 910c243..00f9004 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -12,7 +12,6 @@ 
 #define CONFIG_SYS_TEXT_BASE		0x01000000
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		0x10000000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1 */
 #define CONFIG_SYS_LOAD_ADDR		0x7fc0	/* default load address */
 #define CONFIG_SYS_LONGHELP
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 82d4298..3b5a1cd 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -33,7 +33,6 @@ 
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index 50fd995..505ba24 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -297,7 +297,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
-#define CONFIG_SYS_HZ			1000 /* decrementer freq: 1 ms ticks */
 #define CONFIG_LOOPW
 
 /*
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
index d0609f6..b34e342 100644
--- a/include/configs/jadecpu.h
+++ b/include/configs/jadecpu.h
@@ -12,7 +12,6 @@ 
 
 #define CONFIG_MB86R0x
 #define CONFIG_MB86R0x_IOCLK	get_bus_freq(0)
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_TEXT_BASE	0x10000000
 
 #define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
diff --git a/include/configs/jornada.h b/include/configs/jornada.h
index 71f1e72..7e18d8e 100644
--- a/include/configs/jornada.h
+++ b/include/configs/jornada.h
@@ -70,7 +70,6 @@ 
 #define CONFIG_SYS_BARGSIZE		256	/* Boot Argument Buffer Size */
 #define CONFIG_SYS_MEMTEST_START	0xc0040000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0xc2000000	/* 4..128 MB */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x0a /* core clock 206MHz */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 19200, 38400, 57600, 115200 }
 
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 01c087b..94e166e 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -262,8 +262,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index a82987d..c4735f8 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -54,8 +54,6 @@ 
 
 #define CONFIG_SYS_ALT_MEMTEST		/* memory test, takes time */
 
-#define CONFIG_SYS_HZ			1000	/* decr. freq: 1 ms ticks */
-
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 7c7a305..5beac50 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -324,8 +324,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 5485a42..92d906c 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -96,7 +96,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		0x07C00000
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index 222725c..9f0cd56 100644
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@@ -126,8 +126,6 @@ 
 #define CONFIG_SYS_CLK_FREQ	(48000000)
 #define CONFIG_SYS_CPU_CLK	(1196000000)
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ              (1000)
-#define CONFIG_SYS_HZ		CFG_HZ
 
 /* Ether */
 #define CONFIG_NET_MULTI
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 932dac3..31ebabb 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -306,7 +306,6 @@ 
 /* FIXME: 32.768 MHz is the crystal frequency but */
 /* the real frequency is lower by about 0.75%     */
 #define CONFIG_SYS_CLK_FREQ	32768000
-#define CONFIG_SYS_HZ			1000
 
 /* Bit-field values for MCCR1.  */
 #define CONFIG_SYS_ROMNAL      0
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 6df6f2b..cd96732 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -117,11 +117,6 @@ 
 #define	CONFIG_AUTO_COMPLETE		1
 
 /*
- * Clock Configuration
- */
-#define	CONFIG_SYS_HZ			1000		/* Timer @ 3250000 Hz */
-
-/*
  * DRAM Map
  */
 #define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 08d633b..36769e5 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -111,7 +111,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 #ifdef CONFIG_MMC
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 459c047..3feb261 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -213,8 +213,6 @@ 
 
 #define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * When the watchdog is enabled, output must be fast enough in Linux.
  */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 96f3ba5..0e0cf5c 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -482,8 +482,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index ccb07e3..b0bb31b 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -10,7 +10,6 @@ 
 
 #define CONFIG_MX53
 #define CONFIG_MXC_GPIO
-#define CONFIG_SYS_HZ		1000
 
 #include <asm/arch/imx-regs.h>
 
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index 29ea304..1bbc67d 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -143,8 +143,6 @@ 
 /*use  Hardware WDT */
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		*/
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 487574f..b46d180 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -303,8 +303,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 5e27ab2..4619dfb 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -303,7 +303,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Physical Memory Map
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index b48872b..9aec2d3 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -343,8 +343,6 @@ 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HZ		1000
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 601bb79..e01b9cd 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -250,8 +250,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index d2ec83c..18f5262 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -40,7 +40,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
 
 /* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 0e3de77..aa8d59d 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -399,7 +399,6 @@ 
 
 /* architecture dependent code */
 #define	CONFIG_SYS_USR_EXCEP	/* user exception */
-#define CONFIG_SYS_HZ	1000
 
 #define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
 
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 82f653e..3d79239 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -17,8 +17,6 @@ 
 
 #define CONFIG_MIMC200_EXT_FLASH
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index d7383a6..efaf8b6 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -380,8 +380,6 @@  extern void __led_set(led_id_t id, int state);
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 85ae367..6c62ea1 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -498,7 +498,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index f8c4627..6358526 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -187,8 +187,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR	0x00400000	/* default load address */
 
-#define CONFIG_SYS_HZ		1000		/* decr freq: 1ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 6875cf4..da5dc06 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -421,7 +421,6 @@ 
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 55d93da..6d0d392 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -334,7 +334,6 @@ 
 
 #define CONFIG_SYS_MAXARGS  16                /* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ       1000              /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 7e18723..3a56539 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -68,7 +68,6 @@ 
 /* Clocks */
 #define CONFIG_SYS_CLK_FREQ	24000000
 #define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
 
 /* UART */
 #define CONFIG_SCIF_CONSOLE	1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index bc8bb8d..ed4197a 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -86,7 +86,6 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
 
 /* PCMCIA */
 #define CONFIG_IDE_PCMCIA	1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index a757737..b75a847 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -112,6 +112,5 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
 
 #endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index c4c96bf..439b888 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -83,6 +83,5 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
 
 #endif /* __MS7750SE_H */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 950d71b..2816bcb 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -196,8 +196,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 7700a1d..c50c647 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -176,7 +176,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
 #define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_DISPLAY_BOARDINFO 1
 #define CONFIG_CMDLINE_EDITING  1
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index c458dd9..721b75d 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -35,7 +35,6 @@ 
 /*
  * CLKs configurations
  */
-#define CONFIG_SYS_HZ		1000
 
 /*
  * NS16550 Configuration
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 4de4324..f4acb7e 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -114,7 +114,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
 
 #define CONFIG_SYS_LOAD_ADDR		0x08800000	/* default load address */
-/*#define	CONFIG_SYS_HZ			1000 */
 #define CONFIG_SYS_HZ			3686400
 #define CONFIG_SYS_CPUSPEED		0x141
 
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 543c415..ccd3b6c 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -12,7 +12,6 @@ 
 /* High Level Configuration Options */
 
 #define CONFIG_MX25
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
 #define CONFIG_MXC_GPIO
 
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index b1b6852..3bbc40b 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -135,8 +135,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING	1
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 69045da..c1ca9b5 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -137,8 +137,6 @@ 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x81000000
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index a25b20e..968067f 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -154,8 +154,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Physical Memory Map
  */
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index f0c6776..1c99045 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -227,7 +227,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 04f518a..10c7ee9 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -232,7 +232,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 122ffd0..82ff3cc 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -200,7 +200,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index d39ce7b..305455f 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -150,7 +150,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 7237da5..d0bcb11 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -192,7 +192,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 7e4e1c9..d0f428d 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -135,7 +135,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 1c5c837..2c706b2 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -127,7 +127,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		0x10010000
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index bf6113b..f97a37c 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -185,7 +185,6 @@ 
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128 * 1024)
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 792f17c..c97938d 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -163,7 +163,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_512M)
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE		SZ_128K
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 124dc1e..7ed7a0f 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -41,9 +41,6 @@ 
  * CPU specifics
  */
 
-/* Ticks per second */
-#define CONFIG_SYS_HZ		1000
-
 /* MXS uses FDT */
 #define CONFIG_OF_LIBFDT
 
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 0997f49..0377b58 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -76,7 +76,6 @@ 
 #define CONFIG_BOARD_LATE_INIT	/* call board_late_init during start up */
 
 /* timing informazion */
-#define CONFIG_SYS_HZ		1000 /* Mandatory... */
 #define CONFIG_SYS_TIMERBASE	0x101E2000
 
 /* serial port (PL011) configuration */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index b528f5a..66e0419 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -39,7 +39,6 @@ 
 #define CONFIG_SYS_LOW_RES_TIMER
 #define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_TIMER_BASE
 #define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_TIMER_IRQ
-#define CONFIG_SYS_HZ			1000	/* Always 1000 */
 #define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
 #define CONFIG_SYS_NIOS_TMRCNT \
 	(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3454b86..2b26faf 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -299,7 +299,6 @@ 
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
-#define CONFIG_SYS_HZ		       1000
 
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index cfc5f12..f46357e 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -426,7 +426,6 @@  int rx51_kp_getc(void);
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Stack sizes
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 90c45d5..029100f 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -332,7 +332,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000
 
 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Various low-level settings
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 1a7e5c7..2cb4df5 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -116,7 +116,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
 #define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ		1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c1245e7..32745c2 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -341,7 +341,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index edf6543..3eae288 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -35,7 +35,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /* Size of environment - 128KB */
 #define CONFIG_ENV_SIZE			(128 << 10)
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index ee6db51..d484bc0 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -265,7 +265,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Physical Memory Map
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 0c88419..7dc1117 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -236,7 +236,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 88380a4..4641694 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -217,7 +217,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 91a2568..a83aec3 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -201,7 +201,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index a5e469c..087432a 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -273,7 +273,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index c747d52..ea7e818 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -228,7 +228,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index e9f2383..15f1f4d 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -220,7 +220,6 @@ 
 /* Use General purpose timer 1 */
 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * SDRAM Memory Map
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 75488de..a7b6b13 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -118,7 +118,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
 #define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ		1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h
index dfe0258..f295f02 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -55,7 +55,6 @@ 
 /*
  * TIMER
  */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_OPENRISC_TMR_HZ	100
 
 /*
diff --git a/include/configs/origen.h b/include/configs/origen.h
index da13574..bad34b3 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -102,8 +102,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* ORIGEN has 4 bank of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 543209c..8578a1d 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -39,7 +39,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
 
 /* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5f0c4fb..bae6f8d 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -834,7 +834,6 @@ 
 	/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 4aa7064..0458ae8 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -482,7 +482,6 @@  extern unsigned long get_board_sys_clk(unsigned long dummy);
 	/* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index d1c7a1a..5b5d501 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -284,8 +284,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x08000000	/* default load address */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index c4c5093..c338ab8 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -213,8 +213,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 2ab6fd2..20259f5 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -120,7 +120,6 @@ 
  * Clock Configuration
  */
 #undef  CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ                   1000 /* decrementer freq: 1 ms ticks */
 #define CONFIG_SYS_CPUSPEED             0x210           /* 416MHz ; N=2,L=16 */
 
 /*
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index cab9192..e929b23 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -66,8 +66,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	396000000
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
 
 #define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index a608c87..6b5a5d1 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -364,7 +364,6 @@  RTC configuration
 #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
 
 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
 
 #define CONFIG_DISPLAY_BOARDINFO 1
 
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 2fff0be..4970b13 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -155,7 +155,6 @@ 
  /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
 
 #define CONFIG_CONS_INDEX		1
 /* NS16550 Configuration */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 5de8e98..df4ac61 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -293,8 +293,6 @@ 
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 #define CONFIG_LYNXKDI          1       /* support kdi files            */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 5032119..232d123 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -417,7 +417,6 @@ 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 /* Decrementer freq: 1ms ticks */
-#define CONFIG_SYS_HZ		1000
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index c664010..852bd88 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -100,7 +100,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
 #define CONFIG_IXP425_TIMER_CLK		66666666
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /***************************************************************
  * Platform/Board specific defines start here.
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 027ddd2..d47a18d 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -254,8 +254,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 67b40b2..37c43f4 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,8 +28,6 @@ 
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
 #define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 2b4335e..eccc027 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,8 +28,6 @@ 
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9263"
 #define CONFIG_PM9263		1	/* on a Ronetix PM9263 Board	*/
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 7d16bd8..51fe0be 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -31,7 +31,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x73f00000
 
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 3f9fdd4..3fa3cfd 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -363,7 +363,6 @@ 
  */
 
 #define CONFIG_SYS_BUS_CLK		CONFIG_BUS_CLK
-#define CONFIG_SYS_HZ			1000
 
 
 /*
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 7cf12ba..d7782ac 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -315,7 +315,6 @@ 
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
 #define CONFIG_SYS_LOAD_ADDR		0x140000   /* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index cd3dd76..2303215 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -224,7 +224,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 #define RTC	1				/* enable 32KHz osc */
diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h
index 4e7ad33..03514d1 100644
--- a/include/configs/qemu-malta.h
+++ b/include/configs/qemu-malta.h
@@ -25,7 +25,6 @@ 
  */
 #define CONFIG_SYS_MHZ			250	/* arbitrary value */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_DCACHE_SIZE		16384	/* arbitrary value */
 #define CONFIG_SYS_ICACHE_SIZE		16384	/* arbitrary value */
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index c3a69c5..dd3babb 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -106,8 +106,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* Cached addr */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index 7267a81..a1422fc 100644
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -108,8 +108,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* Cached addr */
 #define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
 
diff --git a/include/configs/qong.h b/include/configs/qong.h
index c57fddd..36d72cd 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -189,8 +189,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser */
 
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index a51f2d4..fe5cadb 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -122,8 +122,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index aaf97eb..c9ebe13 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -124,8 +124,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index 0804480..bc28292 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -165,6 +165,5 @@ 
 #define CONFIG_SYS_CLK_FREQ 44444444
 #endif
 #define CONFIG_SYS_TMU_CLK_DIV      4
-#define CONFIG_SYS_HZ       1000
 
 #endif	/* __R0P7734_H */
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 65dcffb..e6c1c27 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -78,7 +78,6 @@ 
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
 #define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
 
 /*
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index dd1caf1..6eacfb2 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -103,7 +103,6 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 216c6cb..0b7add7 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -30,9 +30,6 @@ 
  */
 #define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
 
-/* Timer */
-#define CONFIG_SYS_HZ			1000
-
 /* Memory layout */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 2743c9a..69804da 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -143,8 +143,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index c303244..0590d20 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -173,8 +173,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4000000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* Goni has 3 banks of DRAM, but swap the bank */
 #define CONFIG_NR_DRAM_BANKS	3
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* OneDRAM Bank #0 */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 97a4008..d9e4c56 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -198,8 +198,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* Universal has 2 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 0feef1e..44d43ba 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -584,7 +584,6 @@ 
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
 #define CONFIG_SYS_LOAD_ADDR		0x400000   /* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_SYS_ALT_MEMTEST                 /* Select full-featured memory test */
 #define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 79c0068..c38cf22 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -20,7 +20,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
 
 #define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 4027030..e873568 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -66,8 +66,6 @@ 
 #define CONFIG_ENV_SIZE		8192
 #define CONFIG_ENV_IS_NOWHERE
 
-#define CONFIG_SYS_HZ			1000
-
 /* Memory things - we don't really want a memory test */
 #define CONFIG_SYS_LOAD_ADDR		0x00000000
 #define CONFIG_SYS_MEMTEST_START	0x00100000
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index 4ba2242..1b07da4 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,7 +26,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12.000 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
 
 #define CONFIG_ARCH_CPU_INIT
 
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 072f97e..cfa083c 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -146,8 +146,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_info (bd_t) */
 
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 6f912ed..593f178 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -451,7 +451,6 @@ 
 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 				/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 84be524..e82e4b1 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -566,7 +566,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index cf97db9..cda40d2 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -507,7 +507,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index a96ffbc..9a5bea3 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -224,8 +224,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x1000000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 /*-----------------------------------------------------------------------
  * IIC stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index fb4dc6f..af70aa8 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -133,5 +133,4 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
 #endif	/* __SH7752EVB_H */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index af76f49..a3c7f25 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -141,5 +141,4 @@ 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	48000000
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ		1000
 #endif	/* __SH7757LCR_H */
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index c1d33d8..f471b93 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -99,7 +99,6 @@ 
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ		1000
 
 /* Ether */
 #define CONFIG_SH_ETHER 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 04f1d22..4b6680e 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -173,6 +173,5 @@ 
 /* The SCIF used external clock. system clock only used timer. */
 #define CONFIG_SYS_CLK_FREQ	50000000
 #define CONFIG_SYS_TMU_CLK_DIV		4
-#define CONFIG_SYS_HZ		1000
 
 #endif	/* __SH7785LCR_H */
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index 5fb7176..c4fd3cb 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -104,7 +104,6 @@ 
 #define CONFIG_SYS_CLK_FREQ 33333333
 #endif /* CONFIG_T_SH7706LSR */
 #define CONFIG_SYS_TMU_CLK_DIV	4
-#define CONFIG_SYS_HZ	1000
 
 /* Network device */
 #define CONFIG_DRIVER_NE2000
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 5426ee8..9eb0a04 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -85,7 +85,6 @@ 
 					+ (8 * 1024 * 1024))
 
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ			1000 /* 1ms clock */
 
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
@@ -113,7 +112,6 @@ 
  /* Platform/Board specific defs */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index b787270..a87444e 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -124,8 +124,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x30800000
 
-#define CONFIG_SYS_HZ			1000
-
 /* support additional compression methods */
 #define CONFIG_BZIP2
 #define CONFIG_LZO
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 507a5d3..c9a2e15 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -166,8 +166,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5e00000)
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 
-#define CONFIG_SYS_HZ			1000
-
 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1 */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 0496661..e2e8efe 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -101,8 +101,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* SMDKV310 has 4 bank of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(512UL << 20UL)	/* 512 MB */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 17eb5f2..988b680 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -20,7 +20,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index edc426a..00d6fa5 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -27,7 +27,6 @@ 
 
 #define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
-#define CONFIG_SYS_HZ		1000		/* must be 1000 */
 
 /*-----------------------------------------------------------------------
  * Size of environment and malloc() pool
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 06aeba6..33f0924 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -195,7 +195,6 @@ 
 /* reload value when timer count to zero */
 #define TIMER_LOAD_VAL			0xFFFFFFFF
 /* Timer info */
-#define CONFIG_SYS_HZ			1000
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_TIMER_CLOCK_KHZ		2400
 #else
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index e73f9c1..143b7ad 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -354,7 +354,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size	*/
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks	*/
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 564f364..bf9f442 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -110,8 +110,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 2400, 4800, 9600, 19200 }
 
 /*
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index c11c2b4..23f7ad7 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -47,7 +47,6 @@ 
 #define CONFIG_I2C_CHIPADDRESS			0x50
 
 /* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ				1000
 
 /* Flash configuration */
 #if defined(CONFIG_FLASH_PNOR)
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index e91f5ae..1a5d0ba 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -402,8 +402,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index a997331..7d6f62b 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -35,7 +35,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432MHz crystal */
-#define CONFIG_SYS_HZ			1000		/* 1ms resolution */
 
 /* misc settings */
 #define CONFIG_CMDLINE_TAG		/* pass commandline to Kernel */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c7689a7..f742940 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -331,7 +331,6 @@ 
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index f5f7f54..10c0113 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -366,7 +366,6 @@ 
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index ead6745..4e3b727 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -132,8 +132,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index a6c1f99..fdb38bf 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -159,8 +159,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 3e82fc2..422e74b 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -293,7 +293,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks*/
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 60dd8ff..683bc54 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -169,7 +169,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Physical Memory Map
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index a1b7720..c94f436 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -109,8 +109,6 @@ 
 
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_TCLOCK_RATE/4)
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
 #define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ba6c6bb..fc49acb 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -109,8 +109,6 @@ 
 #define CONFIG_SYS_MEMTEST_START	(NV_PA_SDRC_CS0 + 0x600000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
 
-#define CONFIG_SYS_HZ			1000
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 2fc2c10..ba16b1c 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -122,7 +122,6 @@ 
 					+ PHYS_DRAM_1_SIZE - (8 << 12))
 
 #define CONFIG_SYS_LOAD_ADDR		0x81000000	/* Default */
-#define CONFIG_SYS_HZ			1000		/* 1ms clock */
 
 #define CONFIG_OMAP_GPIO
 #define CONFIG_MMC
@@ -149,7 +148,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		0x4802E000
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index e90490c..b8c0d54 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -60,7 +60,6 @@ 
 
 #undef  CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ			1000	   /* 1ms clock */
 
 #define CONFIG_CMD_ASKEN
 #define CONFIG_CMD_ECHO
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index e89e874..de83f7a 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -56,7 +56,6 @@ 
 
 /* Timer information. */
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000	/* 1ms clock */
 
 /* I2C IP block */
 #define CONFIG_I2C
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 077e25e..bfb06a7 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -194,7 +194,6 @@ 
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index 27efa69..48fcb24 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -30,7 +30,6 @@ 
 
 #define CONFIG_SYS_TIMERBASE		TNETV107X_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get_rate(TNETV107X_LPSC_TIMER0)
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_PLL_SYS_EXT_FREQ		25000000
 #define CONFIG_PLL_TDM_EXT_FREQ		19200000
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index f841ba8..32f6b00 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -40,7 +40,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ		        1000
 
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_CMDLINE_TAG	        /* enable passing of ATAGs	*/
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index 65dabde..bf341d8 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -51,7 +51,6 @@ 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */
-#define CONFIG_SYS_HZ			1000
 
 /* Misc CPU related */
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 24ea06b..f67ae57 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -218,8 +218,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
 
-#define CONFIG_SYS_HZ			1000
-
 /* TRATS has 4 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS	4
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index a9b2714..c72aff7 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -227,7 +227,6 @@ 
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
 
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index c7c6952..00b0f3f 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -150,7 +150,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
 
 #ifdef CONFIG_MMC
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index a755d52..8f766a5 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -239,8 +239,6 @@ 
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_CMDLINE_EDITING
 
 /* MMC boot support */
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 93dd3c5..2d7479b 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -15,7 +15,6 @@ 
  */
 #define CONFIG_MX25
 #define CONFIG_MX25_CLK32		32000	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
 
 #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
 
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 0c97ab1..45d33a6 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -16,7 +16,6 @@ 
 
 #define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
-#define CONFIG_SYS_HZ		1000		/* must be 1000 */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 8bf7353..b7ac3b5 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -161,8 +161,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
 /*
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index bf04445..1c6e657 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -209,7 +209,6 @@  protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CONFIG_SYS_HZ				1000
 
 /*#define CONFIG_SYS_ETH_DEV_FN	     0x7800 */
 /*#define CONFIG_SYS_ETH_IOBASE	     0x00104000 */
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 0fa55d6..4107747 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -125,8 +125,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 501010e..1465fc8 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -259,8 +259,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 85a6c11..9983116 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -28,7 +28,6 @@ 
 #define CONFIG_MIPS32				/* MIPS 4Kc CPU core	*/
 #define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* SDRAM is initialized by the bootstrap code */
 
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index a4b4732..438524b 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -351,7 +351,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
-#define CONFIG_SYS_HZ		1000		/* 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 75a4500..5b0721c 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -117,7 +117,6 @@ 
 
 #define CONFIG_SYS_MEMTEST_START	V2M_BASE
 #define CONFIG_SYS_MEMTEST_END		0x20000000
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 5a7a066..82db0bf 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -184,7 +184,6 @@ 
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 
 /*
  * Stack sizes
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index cf88d68..cec0724 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -139,8 +139,6 @@ 
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index c24ce9c..222c61a 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -157,7 +157,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER
 
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index e171ae4..4c73134 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -198,7 +198,6 @@ 
 
 /* clocks */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
 
 #define MHZ180
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index b450ab5..f32471e 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -397,7 +397,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16		/* max num of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-#define CONFIG_SYS_HZ		1000		/* decr freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index ba92db3..ed22ac9 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -150,7 +150,6 @@ 
 /*
  * Clock Configuration
  */
-#define	CONFIG_SYS_HZ			1000		/* Timer @ 3250000 Hz */
 #define	CONFIG_SYS_CPUSPEED		0x190		/* 312MHz */
 
 
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 442a984..aee254a 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -206,7 +206,6 @@ 
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 6b7e81f..e47539d 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -152,9 +152,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ				1000
-
-
 /*
  * Stack sizes
  *
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 89cd501..39540e3 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -20,7 +20,6 @@ 
 #include <asm/arch/hardware.h>
 
 /* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ				1000
 #define CONFIG_SYS_HZ_CLOCK			8300000
 
 #define	CONFIG_SYS_TEXT_BASE			0x00800040
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 28c84db..5aff700 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -116,7 +116,6 @@ 
 
 #define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
 
 /*
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index f4f42c5..0ccd73a 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -64,7 +64,6 @@ 
 					/* default load address       */
 #define CONFIG_SYS_EXTBDINFO		1
 					/* Extended board_into (bd_t) */
-#define CONFIG_SYS_HZ			1000
 					/* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING		/* add command line history     */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index ea27050..77f1cf2 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -214,7 +214,6 @@  extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
 #define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG			/* do not reset board on panic */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 97ce3eb..159f2be 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -561,7 +561,6 @@  extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index 372135a..caf5fe1 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -342,7 +342,6 @@ 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 31330ea..267b740 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -416,7 +416,6 @@  extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 340d4be..c03301e 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -401,7 +401,6 @@  extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 386f9de..b4b8061 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -138,8 +138,6 @@ 
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 765b849..2e7f145 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -12,7 +12,6 @@ 
 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX25
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index b9f381f..4c6e6e8 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -12,7 +12,6 @@ 
 
 /* CPU clock */
 #define CONFIG_CPU_FREQ_HZ	800000000
-#define CONFIG_SYS_HZ		1000
 
 /* Ram */
 #define CONFIG_NR_DRAM_BANKS		1