| Message ID | 1380123464-3529-1-git-send-email-eric.nelson@boundarydevices.com |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Stefano Babic |
| Headers | show |
Dear Eric Nelson, > This patch adds the pad to i.MX6DQ and changes the i.MX6DLS > declaration to match the Linux kernel declaration. > > Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> > --- > Note that this is needed for OTG/UDC work Troy is prepping for i.MX6 > and that the previous declaration of MX6_PAD_GPIO_1__USBOTG_ID was > not previously used. > > V2 fixes cut & paste bug (wrong value for mx6q). Acked-by: Marek Vasut <marex@denx.de> Best regards, Marek Vasut
On 25/09/2013 17:37, Eric Nelson wrote: > This patch adds the pad to i.MX6DQ and changes the i.MX6DLS > declaration to match the Linux kernel declaration. > > Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> > --- Applied to u-boot-imx (fix), thanks! Best regards, Stefano Babic
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index c3d0b70..d955241 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -1043,7 +1043,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05E0, 0x0210, 0, 0x083C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05E0, 0x0210, 2, 0x08CC, 1, 0), - MX6_PAD_GPIO_1__USBOTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05E0, 0x0210, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 94df007..fe9a8c3 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -984,6 +984,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> --- Note that this is needed for OTG/UDC work Troy is prepping for i.MX6 and that the previous declaration of MX6_PAD_GPIO_1__USBOTG_ID was not previously used. V2 fixes cut & paste bug (wrong value for mx6q). arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)