diff mbox

[21/21] ARM: mvebu: Enable NAND controller in Armada 370 Mirabox

Message ID 1379606505-2529-22-git-send-email-ezequiel.garcia@free-electrons.com
State Superseded
Headers show

Commit Message

Ezequiel Garcia Sept. 19, 2013, 4:01 p.m. UTC 
The Armada 370 Mirabox has a NAND flash, so enable it in the devicetree
and add the partitions as prepared in the factory images.

In order to skip the driver's custom device detection and use only
ONFI detection, the "marvell,keep-config" parameter is used.

This is needed because we have no support for setting the timings parameters yet.

Not-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 arch/arm/boot/dts/armada-370-mirabox.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 45b1077..dc54ba4 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -136,6 +136,27 @@ 
 					status = "okay";
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x400000>;
+				};
+				partition@400000 {
+					label = "Linux";
+					reg = <0x400000 0x400000>;
+				};
+				partition@800000 {
+					label = "Filesystem";
+					reg = <0x800000 0x3f800000>;
+				};
+			};
 		};
 	};
 };