new file mode 100644
@@ -0,0 +1,21 @@
+/*
+ * Xilinx pci external definitions
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef INCLUDE_XILINX_PCI
+#define INCLUDE_XILINX_PCI
+
+#ifdef CONFIG_XILINX_PCI
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif /* INCLUDE_XILINX_PCI */
@@ -14,6 +14,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
@@ -47,6 +48,7 @@ static int __init virtex_probe(void)
define_machine(virtex) {
.name = "Xilinx Virtex",
.probe = virtex_probe,
+ .setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.restart = ppc4xx_reset_system,
@@ -16,6 +16,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
#include <asm/reg.h>
#include <asm/ppc4xx.h>
#include "44x.h"
@@ -53,6 +54,7 @@ static int __init virtex_probe(void)
define_machine(virtex) {
.name = "Xilinx Virtex440",
.probe = virtex_probe,
+ .setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.calibrate_decr = generic_calibrate_decr,
@@ -329,4 +329,8 @@ config MCU_MPC8349EMITX
also register MCU GPIOs with the generic GPIO API, so you'll able
to use MCU pins as GPIOs.
+config XILINX_PCI
+ bool "Xilinx PCI host bridge support"
+ depends on PCI && XILINX_VIRTEX
+
endmenu
@@ -34,6 +34,7 @@ obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
+obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
new file mode 100644
@@ -0,0 +1,132 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/io.h>
+#include <asm/xilinx_pci.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS 0x114
+
+#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+
+static struct of_device_id xilinx_pci_match[] = {
+ { .compatible = "xlnx,plbv46-pci-1.03.a", },
+ {}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ int i;
+
+ if (dev->devfn || dev->bus->self)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (!hose)
+ return;
+
+ if (!of_match_node(xilinx_pci_match, hose->dn))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack. Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+ return (bus != 0);
+}
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+ struct pci_controller *hose;
+ struct resource r;
+ void __iomem *pci_reg;
+ struct device_node *pci_node;
+
+ pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+ if(!pci_node)
+ return;
+
+ if (of_address_to_resource(pci_node, 0, &r)) {
+ pr_err("xilinx-pci: cannot resolve base address\n");
+ return;
+ }
+
+ hose = pcibios_alloc_controller(pci_node);
+ if (!hose) {
+ pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+ return;
+ }
+
+ /* Setup config space */
+ setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+ r.start + XPLB_PCI_DATA,
+ PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+ /* According to the xilinx plbv46_pci documentation the soft-core starts
+ * a self-init when the bus master enable bit is set. Without this bit
+ * set the pci bus can't be scanned.
+ */
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+ /* Set the max latency timer to 255 */
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+ /* Set the max bus number to 255 */
+ pci_reg = of_iomap(pci_node, 0);
+ out_8(pci_reg + XPLB_PCI_BUS, 0xff);
+ iounmap(pci_reg);
+
+ /* Nothing past the root bridge is working right now. By default
+ * exclude config access to anything except bus 0 */
+ if (!ppc_md.pci_exclude_device)
+ ppc_md.pci_exclude_device = xilinx_pci_exclude_device;
+
+ /* Register the host bridge with the linux kernel! */
+ pci_process_bridge_OF_ranges(hose, pci_node, 1);
+
+ pr_info("xilinx-pci: Registered PCI host bridge\n");
+}