diff mbox

[U-Boot] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10

Message ID 1379089161-4867-1-git-send-email-eric.nelson@boundarydevices.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Eric Nelson Sept. 13, 2013, 4:19 p.m. UTC 
This patch fixes a regression introduced by commit 87d720e0.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Otavio Salvador Sept. 13, 2013, 8:41 p.m. UTC | #1 
On Fri, Sep 13, 2013 at 1:19 PM, Eric Nelson
<eric.nelson@boundarydevices.com> wrote:
> This patch fixes a regression introduced by commit 87d720e0.
>
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Stefano Babic Sept. 20, 2013, 4:09 p.m. UTC | #2 
On 13/09/2013 18:19, Eric Nelson wrote:
> This patch fixes a regression introduced by commit 87d720e0.
> 
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---

Applied to u-boot-imx, thanks!

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index c3d0b70..ad537b4 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -235,7 +235,7 @@  enum {
 	MX6_PAD_DISP0_DAT1__GPIO_4_22		= IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT1__MMDC_MMDC_DEBUG_6	= IOMUX_PAD(0x03C8, 0x00B4, 6, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT1__PL301_SIM_MX6DL_PER1_HADDR_12	= IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
-	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT10__LCDIF_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT10__USDHC1_USDHC_DEBUG_6	= IOMUX_PAD(0x03CC, 0x00B8, 3, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	= IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
@@ -309,7 +309,7 @@  enum {
 	MX6_PAD_DISP0_DAT19__GPIO_5_13		= IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT19__MMDC_MMDC_DEBUG_24	= IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3	= IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
-	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
+	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT2__LCDIF_DAT_2		= IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT2__ECSPI3_MISO		= IOMUX_PAD(0x03F4, 0x00E0, 2, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DEBUG_2	= IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),