Message ID | 1378969499-15066-6-git-send-email-famz@redhat.com |
---|---|
State | New |
Headers | show |
On Thu, Sep 12, 2013 at 03:04:56PM +0800, Fam Zheng wrote: > Added three types of modules: > > typedef enum { > MODULE_LOAD_BLOCK = 0, > MODULE_LOAD_UI, > MODULE_LOAD_NET, > MODULE_LOAD_MAX, > } module_load_type; > > and their loading function: > > void module_load(module_load_type). > > which loads all ".so" files in a subdir under "${PREFIX}/qemu/", e.g. > "/usr/lib/qemu/block". Modules of each type should be loaded before > respective subsystem initialization code. > > Requires gmodule-2.0 from glib. > > Signed-off-by: Fam Zheng <famz@redhat.com> > --- > block.c | 1 + > configure | 28 +++++++++++++++++--------- > include/qemu/module.h | 9 +++++++++ > scripts/create_config | 10 ++++++++++ > util/module.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ > vl.c | 2 ++ > 6 files changed, 96 insertions(+), 9 deletions(-) > > diff --git a/block.c b/block.c > index 26639e8..16ceaaf 100644 > --- a/block.c > +++ b/block.c > @@ -4008,6 +4008,7 @@ BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs, > > void bdrv_init(void) > { > + module_load(MODULE_LOAD_BLOCK); > module_call_init(MODULE_INIT_BLOCK); > } > > diff --git a/configure b/configure > index 5bc7256..275b1a0 100755 > --- a/configure > +++ b/configure > @@ -199,6 +199,7 @@ datadir="\${prefix}/share" > qemu_docdir="\${prefix}/share/doc/qemu" > bindir="\${prefix}/bin" > libdir="\${prefix}/lib" > +moddir="\${prefix}/lib/qemu" > libexecdir="\${prefix}/libexec" > includedir="\${prefix}/include" > sysconfdir="\${prefix}/etc" > @@ -676,6 +677,8 @@ for opt do > ;; > --libdir=*) libdir="$optarg" > ;; > + --moddir=*) moddir="$optarg" > + ;; > --libexecdir=*) libexecdir="$optarg" > ;; > --includedir=*) includedir="$optarg" > @@ -1052,6 +1055,7 @@ echo " --datadir=PATH install firmware in PATH$confsuffix" > echo " --docdir=PATH install documentation in PATH$confsuffix" > echo " --bindir=PATH install binaries in PATH" > echo " --libdir=PATH install libraries in PATH" > +echo " --moddir=PATH install modules in PATH" > echo " --sysconfdir=PATH install config in PATH$confsuffix" > echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)" > echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]" > @@ -2256,15 +2260,19 @@ if test "$mingw32" = yes; then > else > glib_req_ver=2.12 > fi > -if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then > - glib_cflags=`$pkg_config --cflags gthread-2.0` > - glib_libs=`$pkg_config --libs gthread-2.0` > - CFLAGS="$glib_cflags $CFLAGS" > - LIBS="$glib_libs $LIBS" > - libs_qga="$glib_libs $libs_qga" > -else > - error_exit "glib-$glib_req_ver required to compile QEMU" > -fi > + > +for i in gthread-2.0 gmodule-2.0; do > + if $pkg_config --atleast-version=$glib_req_ver $i; then > + glib_cflags=`$pkg_config --cflags $i` > + glib_libs=`$pkg_config --libs $i` > + CFLAGS="$glib_cflags $CFLAGS" > + LIBS="$glib_libs $LIBS" > + libs_qga="$glib_libs $libs_qga" > + else > + error_exit "glib-$glib_req_ver required to compile QEMU" > + fi > +done > + > > ########################################## > # pixman support probe > @@ -3557,6 +3565,7 @@ echo "Install prefix $prefix" > echo "BIOS directory `eval echo $qemu_datadir`" > echo "binary directory `eval echo $bindir`" > echo "library directory `eval echo $libdir`" > +echo "module directory `eval echo $moddir`" > echo "libexec directory `eval echo $libexecdir`" > echo "include directory `eval echo $includedir`" > echo "config directory `eval echo $sysconfdir`" > @@ -3680,6 +3689,7 @@ echo all: >> $config_host_mak > echo "prefix=$prefix" >> $config_host_mak > echo "bindir=$bindir" >> $config_host_mak > echo "libdir=$libdir" >> $config_host_mak > +echo "moddir=$moddir" >> $config_host_mak > echo "libexecdir=$libexecdir" >> $config_host_mak > echo "includedir=$includedir" >> $config_host_mak > echo "mandir=$mandir" >> $config_host_mak > diff --git a/include/qemu/module.h b/include/qemu/module.h > index c4ccd57..f00bc25 100644 > --- a/include/qemu/module.h > +++ b/include/qemu/module.h > @@ -37,4 +37,13 @@ void register_module_init(void (*fn)(void), module_init_type type); > > void module_call_init(module_init_type type); > > +typedef enum { > + MODULE_LOAD_BLOCK = 0, > + MODULE_LOAD_UI, > + MODULE_LOAD_NET, > + MODULE_LOAD_MAX, > +} module_load_type; > + > +void module_load(module_load_type type); > + > #endif > diff --git a/scripts/create_config b/scripts/create_config > index b1adbf5..50391c2 100755 > --- a/scripts/create_config > +++ b/scripts/create_config > @@ -26,6 +26,13 @@ case $line in > # save for the next definitions > prefix=${line#*=} > ;; > + moddir=*) > + eval "moddir=\"${line#*=}\"" > + echo "#define CONFIG_MODDIR \"$moddir\"" > + ;; > + CONFIG_MODULES=*) > + echo "#define CONFIG_MODULES \"${line#*=}\"" > + ;; > CONFIG_AUDIO_DRIVERS=*) > drivers=${line#*=} > echo "#define CONFIG_AUDIO_DRIVERS \\" > @@ -104,6 +111,9 @@ case $line in > value=${line#*=} > echo "#define $name $value" > ;; > + DSOSUF=*) > + echo "#define HOST_DSOSUF \"${line#*=}\"" > + ;; > esac > > done # read > diff --git a/util/module.c b/util/module.c > index 7acc33d..8dd3544 100644 > --- a/util/module.c > +++ b/util/module.c > @@ -13,6 +13,8 @@ > * GNU GPL, version 2 or (at your option) any later version. > */ > > +#include <gmodule.h> > +#include <dirent.h> > #include "qemu-common.h" > #include "qemu/queue.h" > #include "qemu/module.h" > @@ -79,3 +81,56 @@ void module_call_init(module_init_type type) > e->init(); > } > } > + > +void module_load(module_load_type type) > +{ > +#ifdef CONFIG_MODULES > + const char *path; > + const char *dsosuf = HOST_DSOSUF; > + char *fname; > + int suf_len = strlen(dsosuf); > + DIR *dp; > + struct dirent *ep = NULL; > + GModule *g_module; > + > + if (!g_module_supported()) { > + return; > + } > + > + switch (type) { > + case MODULE_LOAD_BLOCK: > + path = CONFIG_MODDIR "/block/"; > + break; > + case MODULE_LOAD_UI: > + path = CONFIG_MODDIR "/ui/"; > + break; > + case MODULE_LOAD_NET: > + path = CONFIG_MODDIR "/net/"; > + break; > + default: > + return; > + } > + > + dp = opendir(path); > + if (!dp) { > + fprintf(stderr, "Failed to open dir %s\n", path); > + return; > + } > + for (ep = readdir(dp); ep; ep = readdir(dp)) { Per previous posting, I believe you should not be blindly loading all modules in the directory using readdir(). Should whitelist load only individual module files that are part of QEMU, to add a block against 3rd party out of tree modules. In addition this still seems to lack any kind of symbol hash addition, which should be a blocker for merging this series. Daniel
On Thu, 09/12 15:08, Daniel P. Berrange wrote: > On Thu, Sep 12, 2013 at 03:04:56PM +0800, Fam Zheng wrote: > > Added three types of modules: > > > > typedef enum { > > MODULE_LOAD_BLOCK = 0, > > MODULE_LOAD_UI, > > MODULE_LOAD_NET, > > MODULE_LOAD_MAX, > > } module_load_type; > > > > and their loading function: > > > > void module_load(module_load_type). > > > > which loads all ".so" files in a subdir under "${PREFIX}/qemu/", e.g. > > "/usr/lib/qemu/block". Modules of each type should be loaded before > > respective subsystem initialization code. > > > > Requires gmodule-2.0 from glib. > > > > Signed-off-by: Fam Zheng <famz@redhat.com> > > --- > > block.c | 1 + > > configure | 28 +++++++++++++++++--------- > > include/qemu/module.h | 9 +++++++++ > > scripts/create_config | 10 ++++++++++ > > util/module.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ > > vl.c | 2 ++ > > 6 files changed, 96 insertions(+), 9 deletions(-) > > > > diff --git a/block.c b/block.c > > index 26639e8..16ceaaf 100644 > > --- a/block.c > > +++ b/block.c > > @@ -4008,6 +4008,7 @@ BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs, > > > > void bdrv_init(void) > > { > > + module_load(MODULE_LOAD_BLOCK); > > module_call_init(MODULE_INIT_BLOCK); > > } > > > > diff --git a/configure b/configure > > index 5bc7256..275b1a0 100755 > > --- a/configure > > +++ b/configure > > @@ -199,6 +199,7 @@ datadir="\${prefix}/share" > > qemu_docdir="\${prefix}/share/doc/qemu" > > bindir="\${prefix}/bin" > > libdir="\${prefix}/lib" > > +moddir="\${prefix}/lib/qemu" > > libexecdir="\${prefix}/libexec" > > includedir="\${prefix}/include" > > sysconfdir="\${prefix}/etc" > > @@ -676,6 +677,8 @@ for opt do > > ;; > > --libdir=*) libdir="$optarg" > > ;; > > + --moddir=*) moddir="$optarg" > > + ;; > > --libexecdir=*) libexecdir="$optarg" > > ;; > > --includedir=*) includedir="$optarg" > > @@ -1052,6 +1055,7 @@ echo " --datadir=PATH install firmware in PATH$confsuffix" > > echo " --docdir=PATH install documentation in PATH$confsuffix" > > echo " --bindir=PATH install binaries in PATH" > > echo " --libdir=PATH install libraries in PATH" > > +echo " --moddir=PATH install modules in PATH" > > echo " --sysconfdir=PATH install config in PATH$confsuffix" > > echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)" > > echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]" > > @@ -2256,15 +2260,19 @@ if test "$mingw32" = yes; then > > else > > glib_req_ver=2.12 > > fi > > -if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then > > - glib_cflags=`$pkg_config --cflags gthread-2.0` > > - glib_libs=`$pkg_config --libs gthread-2.0` > > - CFLAGS="$glib_cflags $CFLAGS" > > - LIBS="$glib_libs $LIBS" > > - libs_qga="$glib_libs $libs_qga" > > -else > > - error_exit "glib-$glib_req_ver required to compile QEMU" > > -fi > > + > > +for i in gthread-2.0 gmodule-2.0; do > > + if $pkg_config --atleast-version=$glib_req_ver $i; then > > + glib_cflags=`$pkg_config --cflags $i` > > + glib_libs=`$pkg_config --libs $i` > > + CFLAGS="$glib_cflags $CFLAGS" > > + LIBS="$glib_libs $LIBS" > > + libs_qga="$glib_libs $libs_qga" > > + else > > + error_exit "glib-$glib_req_ver required to compile QEMU" > > + fi > > +done > > + > > > > ########################################## > > # pixman support probe > > @@ -3557,6 +3565,7 @@ echo "Install prefix $prefix" > > echo "BIOS directory `eval echo $qemu_datadir`" > > echo "binary directory `eval echo $bindir`" > > echo "library directory `eval echo $libdir`" > > +echo "module directory `eval echo $moddir`" > > echo "libexec directory `eval echo $libexecdir`" > > echo "include directory `eval echo $includedir`" > > echo "config directory `eval echo $sysconfdir`" > > @@ -3680,6 +3689,7 @@ echo all: >> $config_host_mak > > echo "prefix=$prefix" >> $config_host_mak > > echo "bindir=$bindir" >> $config_host_mak > > echo "libdir=$libdir" >> $config_host_mak > > +echo "moddir=$moddir" >> $config_host_mak > > echo "libexecdir=$libexecdir" >> $config_host_mak > > echo "includedir=$includedir" >> $config_host_mak > > echo "mandir=$mandir" >> $config_host_mak > > diff --git a/include/qemu/module.h b/include/qemu/module.h > > index c4ccd57..f00bc25 100644 > > --- a/include/qemu/module.h > > +++ b/include/qemu/module.h > > @@ -37,4 +37,13 @@ void register_module_init(void (*fn)(void), module_init_type type); > > > > void module_call_init(module_init_type type); > > > > +typedef enum { > > + MODULE_LOAD_BLOCK = 0, > > + MODULE_LOAD_UI, > > + MODULE_LOAD_NET, > > + MODULE_LOAD_MAX, > > +} module_load_type; > > + > > +void module_load(module_load_type type); > > + > > #endif > > diff --git a/scripts/create_config b/scripts/create_config > > index b1adbf5..50391c2 100755 > > --- a/scripts/create_config > > +++ b/scripts/create_config > > @@ -26,6 +26,13 @@ case $line in > > # save for the next definitions > > prefix=${line#*=} > > ;; > > + moddir=*) > > + eval "moddir=\"${line#*=}\"" > > + echo "#define CONFIG_MODDIR \"$moddir\"" > > + ;; > > + CONFIG_MODULES=*) > > + echo "#define CONFIG_MODULES \"${line#*=}\"" > > + ;; > > CONFIG_AUDIO_DRIVERS=*) > > drivers=${line#*=} > > echo "#define CONFIG_AUDIO_DRIVERS \\" > > @@ -104,6 +111,9 @@ case $line in > > value=${line#*=} > > echo "#define $name $value" > > ;; > > + DSOSUF=*) > > + echo "#define HOST_DSOSUF \"${line#*=}\"" > > + ;; > > esac > > > > done # read > > diff --git a/util/module.c b/util/module.c > > index 7acc33d..8dd3544 100644 > > --- a/util/module.c > > +++ b/util/module.c > > @@ -13,6 +13,8 @@ > > * GNU GPL, version 2 or (at your option) any later version. > > */ > > > > +#include <gmodule.h> > > +#include <dirent.h> > > #include "qemu-common.h" > > #include "qemu/queue.h" > > #include "qemu/module.h" > > @@ -79,3 +81,56 @@ void module_call_init(module_init_type type) > > e->init(); > > } > > } > > + > > +void module_load(module_load_type type) > > +{ > > +#ifdef CONFIG_MODULES > > + const char *path; > > + const char *dsosuf = HOST_DSOSUF; > > + char *fname; > > + int suf_len = strlen(dsosuf); > > + DIR *dp; > > + struct dirent *ep = NULL; > > + GModule *g_module; > > + > > + if (!g_module_supported()) { > > + return; > > + } > > + > > + switch (type) { > > + case MODULE_LOAD_BLOCK: > > + path = CONFIG_MODDIR "/block/"; > > + break; > > + case MODULE_LOAD_UI: > > + path = CONFIG_MODDIR "/ui/"; > > + break; > > + case MODULE_LOAD_NET: > > + path = CONFIG_MODDIR "/net/"; > > + break; > > + default: > > + return; > > + } > > + > > + dp = opendir(path); > > + if (!dp) { > > + fprintf(stderr, "Failed to open dir %s\n", path); > > + return; > > + } > > + for (ep = readdir(dp); ep; ep = readdir(dp)) { > > Per previous posting, I believe you should not be blindly loading > all modules in the directory using readdir(). Should whitelist > load only individual module files that are part of QEMU, to add > a block against 3rd party out of tree modules. > > In addition this still seems to lack any kind of symbol hash > addition, which should be a blocker for merging this series. > Yes, I'll add module list and symbol hash in next revision. Thanks. Fam
diff --git a/block.c b/block.c index 26639e8..16ceaaf 100644 --- a/block.c +++ b/block.c @@ -4008,6 +4008,7 @@ BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs, void bdrv_init(void) { + module_load(MODULE_LOAD_BLOCK); module_call_init(MODULE_INIT_BLOCK); } diff --git a/configure b/configure index 5bc7256..275b1a0 100755 --- a/configure +++ b/configure @@ -199,6 +199,7 @@ datadir="\${prefix}/share" qemu_docdir="\${prefix}/share/doc/qemu" bindir="\${prefix}/bin" libdir="\${prefix}/lib" +moddir="\${prefix}/lib/qemu" libexecdir="\${prefix}/libexec" includedir="\${prefix}/include" sysconfdir="\${prefix}/etc" @@ -676,6 +677,8 @@ for opt do ;; --libdir=*) libdir="$optarg" ;; + --moddir=*) moddir="$optarg" + ;; --libexecdir=*) libexecdir="$optarg" ;; --includedir=*) includedir="$optarg" @@ -1052,6 +1055,7 @@ echo " --datadir=PATH install firmware in PATH$confsuffix" echo " --docdir=PATH install documentation in PATH$confsuffix" echo " --bindir=PATH install binaries in PATH" echo " --libdir=PATH install libraries in PATH" +echo " --moddir=PATH install modules in PATH" echo " --sysconfdir=PATH install config in PATH$confsuffix" echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)" echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]" @@ -2256,15 +2260,19 @@ if test "$mingw32" = yes; then else glib_req_ver=2.12 fi -if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then - glib_cflags=`$pkg_config --cflags gthread-2.0` - glib_libs=`$pkg_config --libs gthread-2.0` - CFLAGS="$glib_cflags $CFLAGS" - LIBS="$glib_libs $LIBS" - libs_qga="$glib_libs $libs_qga" -else - error_exit "glib-$glib_req_ver required to compile QEMU" -fi + +for i in gthread-2.0 gmodule-2.0; do + if $pkg_config --atleast-version=$glib_req_ver $i; then + glib_cflags=`$pkg_config --cflags $i` + glib_libs=`$pkg_config --libs $i` + CFLAGS="$glib_cflags $CFLAGS" + LIBS="$glib_libs $LIBS" + libs_qga="$glib_libs $libs_qga" + else + error_exit "glib-$glib_req_ver required to compile QEMU" + fi +done + ########################################## # pixman support probe @@ -3557,6 +3565,7 @@ echo "Install prefix $prefix" echo "BIOS directory `eval echo $qemu_datadir`" echo "binary directory `eval echo $bindir`" echo "library directory `eval echo $libdir`" +echo "module directory `eval echo $moddir`" echo "libexec directory `eval echo $libexecdir`" echo "include directory `eval echo $includedir`" echo "config directory `eval echo $sysconfdir`" @@ -3680,6 +3689,7 @@ echo all: >> $config_host_mak echo "prefix=$prefix" >> $config_host_mak echo "bindir=$bindir" >> $config_host_mak echo "libdir=$libdir" >> $config_host_mak +echo "moddir=$moddir" >> $config_host_mak echo "libexecdir=$libexecdir" >> $config_host_mak echo "includedir=$includedir" >> $config_host_mak echo "mandir=$mandir" >> $config_host_mak diff --git a/include/qemu/module.h b/include/qemu/module.h index c4ccd57..f00bc25 100644 --- a/include/qemu/module.h +++ b/include/qemu/module.h @@ -37,4 +37,13 @@ void register_module_init(void (*fn)(void), module_init_type type); void module_call_init(module_init_type type); +typedef enum { + MODULE_LOAD_BLOCK = 0, + MODULE_LOAD_UI, + MODULE_LOAD_NET, + MODULE_LOAD_MAX, +} module_load_type; + +void module_load(module_load_type type); + #endif diff --git a/scripts/create_config b/scripts/create_config index b1adbf5..50391c2 100755 --- a/scripts/create_config +++ b/scripts/create_config @@ -26,6 +26,13 @@ case $line in # save for the next definitions prefix=${line#*=} ;; + moddir=*) + eval "moddir=\"${line#*=}\"" + echo "#define CONFIG_MODDIR \"$moddir\"" + ;; + CONFIG_MODULES=*) + echo "#define CONFIG_MODULES \"${line#*=}\"" + ;; CONFIG_AUDIO_DRIVERS=*) drivers=${line#*=} echo "#define CONFIG_AUDIO_DRIVERS \\" @@ -104,6 +111,9 @@ case $line in value=${line#*=} echo "#define $name $value" ;; + DSOSUF=*) + echo "#define HOST_DSOSUF \"${line#*=}\"" + ;; esac done # read diff --git a/util/module.c b/util/module.c index 7acc33d..8dd3544 100644 --- a/util/module.c +++ b/util/module.c @@ -13,6 +13,8 @@ * GNU GPL, version 2 or (at your option) any later version. */ +#include <gmodule.h> +#include <dirent.h> #include "qemu-common.h" #include "qemu/queue.h" #include "qemu/module.h" @@ -79,3 +81,56 @@ void module_call_init(module_init_type type) e->init(); } } + +void module_load(module_load_type type) +{ +#ifdef CONFIG_MODULES + const char *path; + const char *dsosuf = HOST_DSOSUF; + char *fname; + int suf_len = strlen(dsosuf); + DIR *dp; + struct dirent *ep = NULL; + GModule *g_module; + + if (!g_module_supported()) { + return; + } + + switch (type) { + case MODULE_LOAD_BLOCK: + path = CONFIG_MODDIR "/block/"; + break; + case MODULE_LOAD_UI: + path = CONFIG_MODDIR "/ui/"; + break; + case MODULE_LOAD_NET: + path = CONFIG_MODDIR "/net/"; + break; + default: + return; + } + + dp = opendir(path); + if (!dp) { + fprintf(stderr, "Failed to open dir %s\n", path); + return; + } + for (ep = readdir(dp); ep; ep = readdir(dp)) { + int len = strlen(ep->d_name); + if (len > suf_len && + !strcmp(&ep->d_name[len - suf_len], dsosuf)) { + fname = g_strdup_printf("%s%s", path, ep->d_name); + g_module = g_module_open(fname, + G_MODULE_BIND_LAZY | G_MODULE_BIND_LOCAL); + if (!g_module) { + fprintf(stderr, "Failed to open module file %s\n", + g_module_error()); + g_free(fname); + continue; + } + g_free(fname); + } + } +#endif +} diff --git a/vl.c b/vl.c index b4b119a..659e53a 100644 --- a/vl.c +++ b/vl.c @@ -2940,6 +2940,8 @@ int main(int argc, char **argv, char **envp) #endif } + module_load(MODULE_LOAD_UI); + module_load(MODULE_LOAD_NET); module_call_init(MODULE_INIT_QOM); qemu_add_opts(&qemu_drive_opts);
Added three types of modules: typedef enum { MODULE_LOAD_BLOCK = 0, MODULE_LOAD_UI, MODULE_LOAD_NET, MODULE_LOAD_MAX, } module_load_type; and their loading function: void module_load(module_load_type). which loads all ".so" files in a subdir under "${PREFIX}/qemu/", e.g. "/usr/lib/qemu/block". Modules of each type should be loaded before respective subsystem initialization code. Requires gmodule-2.0 from glib. Signed-off-by: Fam Zheng <famz@redhat.com> --- block.c | 1 + configure | 28 +++++++++++++++++--------- include/qemu/module.h | 9 +++++++++ scripts/create_config | 10 ++++++++++ util/module.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ vl.c | 2 ++ 6 files changed, 96 insertions(+), 9 deletions(-)