Patchwork fbdev: Add PLB support and cleanup DCR in xilinxfb driver.

login
register
mail settings
Submitter Grant Likely
Date May 15, 2009, 6:19 p.m.
Message ID <20090515181237.22961.64270.stgit@localhost.localdomain>
Download mbox | patch
Permalink /patch/27275/
State Accepted
Commit dac4ccfb64bcdd5b4c248ccc22903d67486573cd
Delegated to: Grant Likely
Headers show

Comments

Grant Likely - May 15, 2009, 6:19 p.m.
From: John Linn <john.linn@xilinx.com>

Added support for the new xps tft controller. The new core
has PLB interface support in addition to existing DCR interface.

Removed platform device support as both MicroBlaze and PowerPC
use device tree.

Previously, the dcr interface was assumed to be used in mmio mode,
and the register space of the dcr interface was precomputed and stuffed
into the device tree. This driver now makes use of the new dcr
infrastructure to represent the dcr interface. This enables the dcr
interface to be connected directly to a native dcr interface in a clean
way.

Added compatibility for ml507 dvi core.

Signed-off-by: Suneel <suneelg@xilinx.com>
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---

Antonino,

This patch has gone through a couple of cycles of review on the linuxppc
mailing list (the linux-fbdev mailing list wasn't cc'd unfortunately,
hence I'm reposting it).  I think it's ready to be merged.  Can you please
comment and/or pick it up?

If you prefer, I'm willing to merge it via my powerpc tree.

Thanks,
g.

 drivers/video/xilinxfb.c |  290 ++++++++++++++++++++++++----------------------
 1 files changed, 151 insertions(+), 139 deletions(-)
Krzysztof Helt - May 17, 2009, 8:06 a.m.
Hi Grant and John,

On Fri, 15 May 2009 12:19:17 -0600
Grant Likely <grant.likely@secretlab.ca> wrote:

> Antonino,
> 

Antonino is gone for quite a long time. I have reviewed your patch.
I have two comments only. Both are of small caliber.

> If you prefer, I'm willing to merge it via my powerpc tree.
> 

As you prefer. If you want to send it here, CC it top Andrew Morton.

>  drivers/video/xilinxfb.c |  290 ++++++++++++++++++++++++----------------------
>  1 files changed, 151 insertions(+), 139 deletions(-)
> 
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 40a3a2a..7a868bd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c

(...)

> @@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
>  	.activate =	FB_ACTIVATE_NOW
>  };
>  
> +
> +#define PLB_ACCESS_FLAG	0x1		/* 1 = PLB, 0 = DCR */
> +
>  struct xilinxfb_drvdata {
>  
>  	struct fb_info	info;		/* FB driver info record */
>  
> -	u32		regs_phys;	/* phys. address of the control registers */
> -	u32 __iomem	*regs;		/* virt. address of the control registers */
> +	phys_addr_t	regs_phys;	/* phys. address of the control
> +						registers */

There are fields fb_info.fix.mmio_start and fb_info.fix.mmio_len for
physical IO range used by framebuffer. There is no field for
virtual IO address so the "regs" below must stay.

> +	void __iomem	*regs;		/* virt. address of the control
> +						registers */
> +
> +	dcr_host_t      dcr_host;
> +	unsigned int    dcr_start;
> +	unsigned int    dcr_len;
>  
>  	void		*fb_virt;	/* virt. address of the frame buffer */
>  	dma_addr_t	fb_phys;	/* phys. address of the frame buffer */
>  	int		fb_alloced;	/* Flag, was the fb memory alloced? */
>  
> +	u8 		flags;		/* features of the driver */
> +
>  	u32		reg_ctrl_default;
>  
>  	u32		pseudo_palette[PALETTE_ENTRIES_NO];

(...)

> @@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
>  	if (!drvdata->fb_virt) {
>  		dev_err(dev, "Could not allocate frame buffer memory\n");
>  		rc = -ENOMEM;
> -		goto err_fbmem;
> +		if (drvdata->flags & PLB_ACCESS_FLAG)
> +			goto err_fbmem;
> +		else
> +			goto err_region;
>  	}
>  

The code after labels err_fbmem and err_region is also
modified so there is no need for the if clause here (just
do "goto err_fbmem").

>  	/* Clear (turn to black) the framebuffer */


The rest of the patch is ok for me.

Regards,
Krzysztof

----------------------------------------------------------------------
Fantastyczne nagrody do zgarniecia!
Zagraj >> http://link.interia.pl/f2177
Geert Uytterhoeven - May 17, 2009, 8:25 a.m.
On Sun, May 17, 2009 at 10:06, Krzysztof Helt <krzysztof.h1@poczta.fm> wrote:
> On Fri, 15 May 2009 12:19:17 -0600 Grant Likely <grant.likely@secretlab.ca> wrote:
>> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
>> index 40a3a2a..7a868bd 100644
>> --- a/drivers/video/xilinxfb.c
>> +++ b/drivers/video/xilinxfb.c
>> @@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
>>       .activate =     FB_ACTIVATE_NOW
>>  };
>>
>> +
>> +#define PLB_ACCESS_FLAG      0x1             /* 1 = PLB, 0 = DCR */
>> +
>>  struct xilinxfb_drvdata {
>>
>>       struct fb_info  info;           /* FB driver info record */
>>
>> -     u32             regs_phys;      /* phys. address of the control registers */
>> -     u32 __iomem     *regs;          /* virt. address of the control registers */
>> +     phys_addr_t     regs_phys;      /* phys. address of the control
>> +                                             registers */
>
> There are fields fb_info.fix.mmio_start and fb_info.fix.mmio_len for
> physical IO range used by framebuffer. There is no field for
> virtual IO address so the "regs" below must stay.

If I'm not mistaken, this driver is used on ppc44x, where phys_addr_t is 64-bit,
so the 32-bit unsigned long fb_info.fix.mmio_start is not large enough
to hold the
physical address.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
Krzysztof Helt - May 17, 2009, 10:26 a.m.
On Sun, 17 May 2009 10:25:31 +0200
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> On Sun, May 17, 2009 at 10:06, Krzysztof Helt <krzysztof.h1@poczta.fm> wrote:
> > On Fri, 15 May 2009 12:19:17 -0600 Grant Likely <grant.likely@secretlab.ca> wrote:
> >> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> >> index 40a3a2a..7a868bd 100644
> >> --- a/drivers/video/xilinxfb.c
> >> +++ b/drivers/video/xilinxfb.c
> >> @@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
> >>       .activate =     FB_ACTIVATE_NOW
> >>  };
> >>
> >> +
> >> +#define PLB_ACCESS_FLAG      0x1             /* 1 = PLB, 0 = DCR */
> >> +
> >>  struct xilinxfb_drvdata {
> >>
> >>       struct fb_info  info;           /* FB driver info record */
> >>
> >> -     u32             regs_phys;      /* phys. address of the control registers */
> >> -     u32 __iomem     *regs;          /* virt. address of the control registers */
> >> +     phys_addr_t     regs_phys;      /* phys. address of the control
> >> +                                             registers */
> >
> > There are fields fb_info.fix.mmio_start and fb_info.fix.mmio_len for
> > physical IO range used by framebuffer. There is no field for
> > virtual IO address so the "regs" below must stay.
> 
> If I'm not mistaken, this driver is used on ppc44x, where phys_addr_t is 64-bit,
> so the 32-bit unsigned long fb_info.fix.mmio_start is not large enough
> to hold the
> physical address.
> 

If so please ignore my comment.

Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>

Regards,
Krzysztof

----------------------------------------------------------------------
Dzwonki na komorkê!
Sprawdz >> http://link.interia.pl/f2161
Benjamin Herrenschmidt - May 18, 2009, 3:20 a.m.
On Sun, 2009-05-17 at 12:26 +0200, Krzysztof Helt wrote:

> If so please ignore my comment.
> 
> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>

Andrew, will you merge this or should I stick it into the powerpc.git
tree ?

Cheers,
Ben.

Patch

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 40a3a2a..7a868bd 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -1,13 +1,12 @@ 
 /*
- * xilinxfb.c
- *
- * Xilinx TFT LCD frame buffer driver
+ * Xilinx TFT frame buffer driver
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
  *
  * 2002-2007 (c) MontaVista Software, Inc.
  * 2007 (c) Secret Lab Technologies, Ltd.
+ * 2009 (c) Xilinx Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -24,33 +23,38 @@ 
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#if defined(CONFIG_OF)
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#endif
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/xilinxfb.h>
+#include <asm/dcr.h>
 
 #define DRIVER_NAME		"xilinxfb"
-#define DRIVER_DESCRIPTION	"Xilinx TFT LCD frame buffer driver"
+
 
 /*
  * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
- * the VGA port on the Xilinx ML40x board. This is a hardware display controller
- * for a 640x480 resolution TFT or VGA screen.
+ * the VGA port on the Xilinx ML40x board. This is a hardware display
+ * controller for a 640x480 resolution TFT or VGA screen.
  *
  * The interface to the framebuffer is nice and simple.  There are two
  * control registers.  The first tells the LCD interface where in memory
  * the frame buffer is (only the 11 most significant bits are used, so
  * don't start thinking about scrolling).  The second allows the LCD to
  * be turned on or off as well as rotated 180 degrees.
+ *
+ * In case of direct PLB access the second control register will be at
+ * an offset of 4 as compared to the DCR access where the offset is 1
+ * i.e. REG_CTRL. So this is taken care in the function
+ * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * direct PLB access.
  */
 #define NUM_REGS	2
 #define REG_FB_ADDR	0
@@ -107,17 +111,28 @@  static struct fb_var_screeninfo xilinx_fb_var = {
 	.activate =	FB_ACTIVATE_NOW
 };
 
+
+#define PLB_ACCESS_FLAG	0x1		/* 1 = PLB, 0 = DCR */
+
 struct xilinxfb_drvdata {
 
 	struct fb_info	info;		/* FB driver info record */
 
-	u32		regs_phys;	/* phys. address of the control registers */
-	u32 __iomem	*regs;		/* virt. address of the control registers */
+	phys_addr_t	regs_phys;	/* phys. address of the control
+						registers */
+	void __iomem	*regs;		/* virt. address of the control
+						registers */
+
+	dcr_host_t      dcr_host;
+	unsigned int    dcr_start;
+	unsigned int    dcr_len;
 
 	void		*fb_virt;	/* virt. address of the frame buffer */
 	dma_addr_t	fb_phys;	/* phys. address of the frame buffer */
 	int		fb_alloced;	/* Flag, was the fb memory alloced? */
 
+	u8 		flags;		/* features of the driver */
+
 	u32		reg_ctrl_default;
 
 	u32		pseudo_palette[PALETTE_ENTRIES_NO];
@@ -128,14 +143,19 @@  struct xilinxfb_drvdata {
 	container_of(_info, struct xilinxfb_drvdata, info)
 
 /*
- * The LCD controller has DCR interface to its registers, but all
- * the boards and configurations the driver has been tested with
- * use opb2dcr bridge. So the registers are seen as memory mapped.
- * This macro is to make it simple to add the direct DCR access
- * when it's needed.
+ * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * To perform the read/write on the registers we need to check on
+ * which bus its connected and call the appropriate write API.
  */
-#define xilinx_fb_out_be32(driverdata, offset, val) \
-	out_be32(driverdata->regs + offset, val)
+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+				u32 val)
+{
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		out_be32(drvdata->regs + (offset << 2), val);
+	else
+		dcr_write(drvdata->dcr_host, offset, val);
+
+}
 
 static int
 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,35 +223,34 @@  static struct fb_ops xilinxfb_ops =
  * Bus independent setup/teardown
  */
 
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev,
+			   struct xilinxfb_drvdata *drvdata,
+			   unsigned long physaddr,
 			   struct xilinxfb_platform_data *pdata)
 {
-	struct xilinxfb_drvdata *drvdata;
 	int rc;
 	int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
 
-	/* Allocate the driver data region */
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
-	}
-	dev_set_drvdata(dev, drvdata);
-
-	/* Map the control registers in */
-	if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_region;
-	}
-	drvdata->regs_phys = physaddr;
-	drvdata->regs = ioremap(physaddr, 8);
-	if (!drvdata->regs) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_map;
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/*
+		 * Map the control registers in if the controller
+		 * is on direct PLB interface.
+		 */
+		if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_region;
+		}
+
+		drvdata->regs_phys = physaddr;
+		drvdata->regs = ioremap(physaddr, 8);
+		if (!drvdata->regs) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_map;
+		}
 	}
 
 	/* Allocate the framebuffer memory */
@@ -247,7 +266,10 @@  static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	if (!drvdata->fb_virt) {
 		dev_err(dev, "Could not allocate frame buffer memory\n");
 		rc = -ENOMEM;
-		goto err_fbmem;
+		if (drvdata->flags & PLB_ACCESS_FLAG)
+			goto err_fbmem;
+		else
+			goto err_region;
 	}
 
 	/* Clear (turn to black) the framebuffer */
@@ -260,7 +282,8 @@  static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+	xilinx_fb_out_be32(drvdata, REG_CTRL,
+					drvdata->reg_ctrl_default);
 
 	/* Fill struct fb_info */
 	drvdata->info.device = dev;
@@ -296,11 +319,14 @@  static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 		goto err_regfb;
 	}
 
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/* Put a banner in the log (for DEBUG) */
+		dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+					drvdata->regs);
+	}
 	/* Put a banner in the log (for DEBUG) */
-	dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
-		(unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
-		fbsize);
+	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
+		(void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
 
 	return 0;	/* success */
 
@@ -311,14 +337,19 @@  err_cmap:
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
 			drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
+
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 
 err_fbmem:
-	iounmap(drvdata->regs);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		iounmap(drvdata->regs);
 
 err_map:
-	release_mem_region(physaddr, 8);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		release_mem_region(physaddr, 8);
 
 err_region:
 	kfree(drvdata);
@@ -342,12 +373,18 @@  static int xilinxfb_release(struct device *dev)
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
 				  drvdata->fb_virt, drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
 
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
-	iounmap(drvdata->regs);
 
-	release_mem_region(drvdata->regs_phys, 8);
+	/* Release the resources, as allocated based on interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		iounmap(drvdata->regs);
+		release_mem_region(drvdata->regs_phys, 8);
+	} else
+		dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
 
 	kfree(drvdata);
 	dev_set_drvdata(dev, NULL);
@@ -356,77 +393,57 @@  static int xilinxfb_release(struct device *dev)
 }
 
 /* ---------------------------------------------------------------------
- * Platform bus binding
- */
-
-static int
-xilinxfb_platform_probe(struct platform_device *pdev)
-{
-	struct xilinxfb_platform_data *pdata;
-	struct resource *res;
-
-	/* Find the registers address */
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Couldn't get registers resource\n");
-		return -ENODEV;
-	}
-
-	/* If a pdata structure is provided, then extract the parameters */
-	pdata = &xilinx_fb_default_pdata;
-	if (pdev->dev.platform_data) {
-		pdata = pdev->dev.platform_data;
-		if (!pdata->xres)
-			pdata->xres = xilinx_fb_default_pdata.xres;
-		if (!pdata->yres)
-			pdata->yres = xilinx_fb_default_pdata.yres;
-		if (!pdata->xvirt)
-			pdata->xvirt = xilinx_fb_default_pdata.xvirt;
-		if (!pdata->yvirt)
-			pdata->yvirt = xilinx_fb_default_pdata.yvirt;
-	}
-
-	return xilinxfb_assign(&pdev->dev, res->start, pdata);
-}
-
-static int
-xilinxfb_platform_remove(struct platform_device *pdev)
-{
-	return xilinxfb_release(&pdev->dev);
-}
-
-
-static struct platform_driver xilinxfb_platform_driver = {
-	.probe		= xilinxfb_platform_probe,
-	.remove		= xilinxfb_platform_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = DRIVER_NAME,
-	},
-};
-
-/* ---------------------------------------------------------------------
  * OF bus binding
  */
 
-#if defined(CONFIG_OF)
 static int __devinit
 xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct resource res;
 	const u32 *prop;
+	u32 *p;
+	u32 tft_access;
 	struct xilinxfb_platform_data pdata;
+	struct resource res;
 	int size, rc;
+	int start = 0, len = 0;
+	dcr_host_t dcr_host;
+	struct xilinxfb_drvdata *drvdata;
 
 	/* Copy with the default pdata (not a ptr reference!) */
 	pdata = xilinx_fb_default_pdata;
 
 	dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
 
-	rc = of_address_to_resource(op->node, 0, &res);
-	if (rc) {
-		dev_err(&op->dev, "invalid address\n");
-		return rc;
+	/*
+	 * To check whether the core is connected directly to DCR or PLB
+	 * interface and initialize the tft_access accordingly.
+	 */
+	p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
+
+	if (p)
+		tft_access = *p;
+	else
+		tft_access = 0;		/* For backward compatibility */
+
+	/*
+	 * Fill the resource structure if its direct PLB interface
+	 * otherwise fill the dcr_host structure.
+	 */
+	if (tft_access) {
+		rc = of_address_to_resource(op->node, 0, &res);
+		if (rc) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
+
+	} else {
+		start = dcr_resource_start(op->node, 0);
+		len = dcr_resource_len(op->node, 0);
+		dcr_host = dcr_map(op->node, start, len);
+		if (!DCR_MAP_OK(dcr_host)) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
 	}
 
 	prop = of_get_property(op->node, "phys-size", &size);
@@ -450,7 +467,26 @@  xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 	if (of_find_property(op->node, "rotate-display", NULL))
 		pdata.rotate_screen = 1;
 
-	return xilinxfb_assign(&op->dev, res.start, &pdata);
+	/* Allocate the driver data region */
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(&op->dev, "Couldn't allocate device private record\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(&op->dev, drvdata);
+
+	if (tft_access)
+		drvdata->flags |= PLB_ACCESS_FLAG;
+
+	/* Arguments are passed based on the interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
+	} else {
+		drvdata->dcr_start = start;
+		drvdata->dcr_len = len;
+		drvdata->dcr_host = dcr_host;
+		return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
+	}
 }
 
 static int __devexit xilinxfb_of_remove(struct of_device *op)
@@ -460,7 +496,9 @@  static int __devexit xilinxfb_of_remove(struct of_device *op)
 
 /* Match table for of_platform binding */
 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-tft-1.00.a", },
 	{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
+	{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
@@ -476,22 +514,6 @@  static struct of_platform_driver xilinxfb_of_driver = {
 	},
 };
 
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init xilinxfb_of_register(void)
-{
-	pr_debug("xilinxfb: calling of_register_platform_driver()\n");
-	return of_register_platform_driver(&xilinxfb_of_driver);
-}
-
-static inline void __exit xilinxfb_of_unregister(void)
-{
-	of_unregister_platform_driver(&xilinxfb_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init xilinxfb_of_register(void) { return 0; }
-static inline void __exit xilinxfb_of_unregister(void) { }
-#endif /* CONFIG_OF */
 
 /* ---------------------------------------------------------------------
  * Module setup and teardown
@@ -500,28 +522,18 @@  static inline void __exit xilinxfb_of_unregister(void) { }
 static int __init
 xilinxfb_init(void)
 {
-	int rc;
-	rc = xilinxfb_of_register();
-	if (rc)
-		return rc;
-
-	rc = platform_driver_register(&xilinxfb_platform_driver);
-	if (rc)
-		xilinxfb_of_unregister();
-
-	return rc;
+	return of_register_platform_driver(&xilinxfb_of_driver);
 }
 
 static void __exit
 xilinxfb_cleanup(void)
 {
-	platform_driver_unregister(&xilinxfb_platform_driver);
-	xilinxfb_of_unregister();
+	of_unregister_platform_driver(&xilinxfb_of_driver);
 }
 
 module_init(xilinxfb_init);
 module_exit(xilinxfb_cleanup);
 
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
 MODULE_LICENSE("GPL");