diff mbox

[08/12] mtd: nand: don't print ONFI buswidth errors unless we need to

Message ID 1378319126-24473-9-git-send-email-computersforpeace@gmail.com
State New, archived
Headers show

Commit Message

Brian Norris Sept. 4, 2013, 6:25 p.m. UTC
There are a few things wrong with this error message.

First, it is unnecessary to print until after the READID (address 20h)
command. READID *has* to work properly in whatever bus width
configuration we are in, or else no identification mode works. So we can
silence some useless warnings on systems which come up in 16-bit mode
and do not even respond with an O-N-F-I string.

Second, it doesn't read very well, and it has an extraneous exclamation.

Third, it doesn't have proper multiline comment style.

So, I move the whole block below the READID check and rewrite it.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/mtd/nand/nand_base.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 38b8dd4..8599096 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2937,17 +2937,21 @@  static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	int i;
 	int val;
 
-	/* ONFI need to be probed in 8 bits mode, and 16 bits should be selected with NAND_BUSWIDTH_AUTO */
-	if (chip->options & NAND_BUSWIDTH_16) {
-		pr_err("Trying ONFI probe in 16 bits mode, aborting !\n");
-		return 0;
-	}
 	/* Try ONFI for unknown chip or LP */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
 	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
+	/*
+	 * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
+	 * with NAND_BUSWIDTH_16
+	 */
+	if (chip->options & NAND_BUSWIDTH_16) {
+		pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
+		return 0;
+	}
+
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
 		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));