diff mbox

[v2] ARM: at91/dt: fix phy address in sama5xmb to match the reg property

Message ID 1377607313-21331-1-git-send-email-b.brezillon@overkiz.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Boris Brezillon Aug. 27, 2013, 12:41 p.m. UTC
Fix phy0 address to match the reg property defined in phy0 node.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Changes since v1:
 - better commit message

 arch/arm/boot/dts/sama5d3xmb.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Boris Brezillon Aug. 27, 2013, 12:43 p.m. UTC | #1
Sorry for the noise, but the previous commit message was not clear enough.

On 27/08/2013 14:41, Boris BREZILLON wrote:
> Fix phy0 address to match the reg property defined in phy0 node.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> Changes since v1:
>   - better commit message
>
>   arch/arm/boot/dts/sama5d3xmb.dtsi |    2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
> index e9521d5..dba739b 100644
> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
> @@ -84,7 +84,7 @@
>   
>   				#address-cells = <1>;
>   				#size-cells = <0>;
> -				phy0: ethernet-phy@0 {
> +				phy0: ethernet-phy@1 {
>   					interrupt-parent = <&pioE>;
>   					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
>   					reg = <1>;

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index e9521d5..dba739b 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -84,7 +84,7 @@ 
 
 				#address-cells = <1>;
 				#size-cells = <0>;
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
 					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
 					reg = <1>;