@@ -2444,30 +2444,16 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
{
- int i, vlan_id;
- __be32 *targets = bond->params.arp_targets;
- struct vlan_entry *vlan;
- struct net_device *vlan_dev = NULL;
+ struct net_device *upper;
+ struct list_head *iter;
struct rtable *rt;
+ __be32 *targets = bond->params.arp_targets, addr;
+ int i, vlan_id;
- for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
- __be32 addr;
- if (!targets[i])
- break;
+ for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
pr_debug("basa: target %pI4\n", &targets[i]);
- if (!bond_vlan_used(bond)) {
- pr_debug("basa: empty vlan: arp_send\n");
- addr = bond_confirm_addr(bond->dev, targets[i], 0);
- bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
- addr, 0);
- continue;
- }
- /*
- * If VLANs are configured, we do a route lookup to
- * determine which VLAN interface would be used, so we
- * can tag the ARP with the proper VLAN tag.
- */
+ /* Find out through which dev should the packet go */
rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
RTO_ONLINK, 0);
if (IS_ERR(rt)) {
@@ -2478,47 +2464,39 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
continue;
}
- /*
- * This target is not on a VLAN
- */
- if (rt->dst.dev == bond->dev) {
- ip_rt_put(rt);
- pr_debug("basa: rtdev == bond->dev: arp_send\n");
- addr = bond_confirm_addr(bond->dev, targets[i], 0);
- bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
- addr, 0);
- continue;
- }
-
vlan_id = 0;
- list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
- rcu_read_lock();
- vlan_dev = __vlan_find_dev_deep(bond->dev,
- htons(ETH_P_8021Q),
- vlan->vlan_id);
- rcu_read_unlock();
- if (vlan_dev == rt->dst.dev) {
- vlan_id = vlan->vlan_id;
- pr_debug("basa: vlan match on %s %d\n",
- vlan_dev->name, vlan_id);
- break;
- }
- }
- if (vlan_id && vlan_dev) {
- ip_rt_put(rt);
- addr = bond_confirm_addr(vlan_dev, targets[i], 0);
- bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
- addr, vlan_id);
- continue;
+ /* bond device itself */
+ if (rt->dst.dev == bond->dev)
+ goto found;
+
+ /* search for upper device, like vlan/bridge/team/etc */
+ rcu_read_lock();
+ netdev_for_each_upper_dev(bond->dev, upper, iter) {
+ if (upper == rt->dst.dev) {
+ /* if it's a vlan - get its VID */
+ if (is_vlan_dev(rt->dst.dev))
+ vlan_id = vlan_dev_vlan_id(rt->dst.dev);
+
+ rcu_read_unlock();
+ goto found;
+ }
}
+ rcu_read_unlock();
- if (net_ratelimit()) {
+ /* Not our device - skip */
+ if (net_ratelimit())
pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
bond->dev->name, &targets[i],
rt->dst.dev ? rt->dst.dev->name : "NULL");
- }
ip_rt_put(rt);
+ continue;
+
+found:
+ addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
+ ip_rt_put(rt);
+ bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
+ addr, vlan_id);
}
}
Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. v1: use netdev_for_each_upper_dev() CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> --- drivers/net/bonding/bond_main.c | 84 ++++++++++++++------------------------ 1 files changed, 31 insertions(+), 53 deletions(-)