Message ID | 1377520540-21884-1-git-send-email-b.brezillon@overkiz.com |
---|---|
State | Superseded, archived |
Delegated to: | David Miller |
Headers | show |
Hello. On 26-08-2013 16:35, Boris BREZILLON wrote: > This patch describe the phy used on atmel sama5d3 mother board: > - phy address > - phy interrupt pin > Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> > --- > arch/arm/boot/dts/sama5d3xmb.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi > index 8a9e05d..e9521d5 100644 > --- a/arch/arm/boot/dts/sama5d3xmb.dtsi > +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi > @@ -81,6 +81,14 @@ > > macb1: ethernet@f802c000 { > phy-mode = "rmii"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + phy0: ethernet-phy@0 { Address part of the node name doesn't match the "reg" property. > + interrupt-parent = <&pioE>; > + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; > + reg = <1>; > + }; WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Sergei, On 26/08/2013 15:21, Sergei Shtylyov wrote: > Hello. > > On 26-08-2013 16:35, Boris BREZILLON wrote: > >> This patch describe the phy used on atmel sama5d3 mother board: >> - phy address >> - phy interrupt pin > >> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> >> --- >> arch/arm/boot/dts/sama5d3xmb.dtsi | 8 ++++++++ >> 1 file changed, 8 insertions(+) > >> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi >> b/arch/arm/boot/dts/sama5d3xmb.dtsi >> index 8a9e05d..e9521d5 100644 >> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi >> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi >> @@ -81,6 +81,14 @@ >> >> macb1: ethernet@f802c000 { >> phy-mode = "rmii"; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + phy0: ethernet-phy@0 { > > Address part of the node name doesn't match the "reg" property. Indeed, I based my definition on arch/arc/boot/dts/angel4.dts where phy is registered like this : phy0: ethernet-phy@0 { reg = <1>; }; I think it's buggy there too, because I checked other dts files and they all put the same address after @ and in reg register. I'll fix this fot the next version. Thanks Best Regards, Boris > >> + interrupt-parent = <&pioE>; >> + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; >> + reg = <1>; >> + }; > > WBR, Sergei > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 8a9e05d..e9521d5 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -81,6 +81,14 @@ macb1: ethernet@f802c000 { phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + interrupt-parent = <&pioE>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + reg = <1>; + }; }; pinctrl@fffff200 {
This patch describe the phy used on atmel sama5d3 mother board: - phy address - phy interrupt pin Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- arch/arm/boot/dts/sama5d3xmb.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)