@@ -272,6 +272,14 @@ config USB_NET_DM9601
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
+config USB_NET_SR9700
+ tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ help
+ This option adds support for CoreChip-sz SR9700 based USB 1.1
+ 10/100 Ethernet adapters.
+
config USB_NET_SMSC75XX
tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
depends on USB_USBNET
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
+obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
new file mode 100644
@@ -0,0 +1,551 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : liujl <liujunliang_ljl@163.com>
+ *
+ * Based on dm9601.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#include "sr9700.h"
+
+static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ int err;
+
+ err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG,
+ 0, reg, data, length);
+ if ((err != length) && (err >= 0))
+ err = -EINVAL;
+ return err;
+}
+
+static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ int err;
+
+ err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
+ 0, reg, data, length);
+ if ((err >= 0) && (err < length))
+ err = -EINVAL;
+ return err;
+}
+
+static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+ return sr_read(dev, reg, 1, value);
+}
+
+static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+ return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
+ value, reg, NULL, 0);
+}
+
+static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+ 0, reg, data, length);
+}
+
+static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+ usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+ value, reg, NULL, 0);
+}
+
+static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
+{
+ int i, ret;
+
+ ret = 0;
+ for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
+ u8 tmp = 0;
+
+ udelay(1);
+ ret = sr_read_reg(dev, EPCR, &tmp);
+ if (ret < 0)
+ goto out;
+
+ /* ready */
+ if ((tmp & EPCR_ERRE) == 0)
+ break;
+ }
+
+ if (i >= SR_SHARE_TIMEOUT) {
+ netdev_err(dev->net, "%s write timed out!\n",
+ phy ? "phy" : "eeprom");
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
+{
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ sr_write_reg(dev, EPAR, phy ? (reg | 0x40) : reg);
+ sr_write_reg(dev, EPCR, phy ? 0xc : 0x4);
+
+ ret = wait_phy_eeprom_ready(dev, phy);
+ if (ret < 0)
+ goto out;
+
+ sr_write_reg(dev, EPCR, 0x0);
+ ret = sr_read(dev, EPDR, 2, value);
+
+ netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+ phy, reg, *value, ret);
+
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
+{
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ ret = sr_write(dev, EPDR, 2, &value);
+ if (ret < 0)
+ goto out;
+
+ sr_write_reg(dev, EPAR, phy ? (reg | 0x40) : reg);
+ sr_write_reg(dev, EPCR, phy ? 0x1a : 0x12);
+
+ ret = wait_phy_eeprom_ready(dev, phy);
+ if (ret < 0)
+ goto out;
+
+ sr_write_reg(dev, EPCR, 0x0);
+
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+ return sr_share_read_word(dev, 0, offset, value);
+}
+
+static int sr9700_get_eeprom_len(struct net_device *dev)
+{
+ return SR_EEPROM_LEN;
+}
+
+static int sr9700_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 *ebuf = (__le16 *)data;
+ int ret = 0;
+ int i;
+
+ /* access is 16bit */
+ if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
+ return -EINVAL;
+
+ for (i = 0; i < eeprom->len / 2; i++)
+ ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, &ebuf[i]);
+
+ return ret;
+}
+
+static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ __le16 res;
+ int rc = 0;
+
+ if (phy_id) {
+ netdev_dbg(dev->net, "Only internal phy supported\n");
+ return 0;
+ }
+
+ /* Access NSR_LINKST bit for link status instead of MII_BMSR */
+ if (loc == MII_BMSR) {
+ u8 value;
+
+ sr_read_reg(dev, NSR, &value);
+ if (value & NSR_LINKST)
+ rc = 1;
+ }
+ sr_share_read_word(dev, 1, loc, &res);
+ if (rc == 1)
+ res = le16_to_cpu(res) | BMSR_LSTATUS;
+ else
+ res = le16_to_cpu(res) & ~BMSR_LSTATUS;
+
+ netdev_dbg(dev->net, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+ phy_id, loc, res);
+
+ return res;
+}
+
+static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ __le16 res = cpu_to_le16(val);
+
+ if (phy_id) {
+ netdev_dbg(dev->net, "Only internal phy supported\n");
+ return;
+ }
+
+ netdev_dbg(dev->net, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+ phy_id, loc, val);
+
+ sr_share_write_word(dev, 1, loc, res);
+}
+
+static u32 sr9700_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 value = 0;
+ int rc = 0;
+
+ /* Get the Link Status directly */
+ sr_read_reg(dev, NSR, &value);
+ if (value & NSR_LINKST)
+ rc = 1;
+
+ return rc;
+}
+
+static int sr9700_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops sr9700_ethtool_ops = {
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_link = sr9700_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_eeprom_len = sr9700_get_eeprom_len,
+ .get_eeprom = sr9700_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static void sr9700_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ /* We use the 20 byte dev->data for our 8 byte filter buffer
+ * to avoid allocating memory that is tricky to free later
+ */
+ u8 *hashes = (u8 *)&dev->data;
+ /* rx_ctl setting : enable, disable_long, disable_crc */
+ u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
+
+ memset(hashes, 0x00, SR_MCAST_SIZE);
+ /* broadcast address */
+ hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= RCR_PRMSC;
+ } else if (net->flags & IFF_ALLMULTI ||
+ netdev_mc_count(net) > SR_MCAST_MAX) {
+ rx_ctl |= RCR_RUNT;
+ } else if (!netdev_mc_empty(net)) {
+ struct netdev_hw_addr *ha;
+ netdev_for_each_mc_addr(ha, net) {
+ u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+ hashes[crc >> 3] |= 1 << (crc & 0x7);
+ }
+ }
+
+ sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes);
+ sr_write_reg_async(dev, RCR, rx_ctl);
+}
+
+static int sr9700_set_mac_address(struct net_device *net, void *p)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data)) {
+ netdev_err(net, "not setting invalid mac address %pM\n",
+ addr->sa_data);
+ return -EINVAL;
+ }
+
+ memcpy(net->dev_addr, addr->sa_data, net->addr_len);
+ sr_write_async(dev, PAR, 6, dev->net->dev_addr);
+
+ return 0;
+}
+
+static const struct net_device_ops sr9700_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = sr9700_ioctl,
+ .ndo_set_rx_mode = sr9700_set_multicast,
+ .ndo_set_mac_address = sr9700_set_mac_address,
+};
+
+static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ ret = usbnet_get_endpoints(dev, intf);
+ if (ret)
+ goto out;
+
+ dev->net->netdev_ops = &sr9700_netdev_ops;
+ dev->net->ethtool_ops = &sr9700_ethtool_ops;
+ dev->net->hard_header_len += SR_TX_OVERHEAD;
+ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+ /* bulkin buffer is preferably not less than 3K */
+ dev->rx_urb_size = 3072;
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = sr_mdio_read;
+ dev->mii.mdio_write = sr_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+
+ /* reset the sr9700 */
+ sr_write_reg(dev, NCR, 1);
+ udelay(20);
+
+ /* read MAC
+ * After Chip Power on, the Chip will reload the MAC from
+ * EEPROM automatically to PAR. In case there is no EEPROM externally,
+ * a default MAC address is stored in PAR for making chip work properly.
+ */
+ if (sr_read(dev, PAR, ETH_ALEN, dev->net->dev_addr) < 0) {
+ netdev_err(dev->net, "Error reading MAC address\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* power up and reset phy */
+ sr_write_reg(dev, PRR, 1);
+ /* at least 10ms, here 20ms for safe */
+ mdelay(20);
+ sr_write_reg(dev, PRR, 0);
+ /* at least 1ms, here 2ms for reading right register */
+ udelay(2 * 1000);
+
+ /* receive broadcast packets */
+ sr9700_set_multicast(dev->net);
+
+ sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ sr_mdio_write(dev->net, dev->mii.phy_id,
+ MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+out:
+ return ret;
+}
+
+static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct sk_buff *sr_skb;
+ int len;
+
+ /* skb content (packets) format :
+ * p0 p1 p2 ...... pm
+ * / \
+ * / \
+ * / \
+ * / \
+ * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
+ *
+ * p0 : packet 0
+ * p0b0 : packet 0 byte 0
+ *
+ * b0: rx status
+ * b1: packet length (incl crc) low
+ * b2: packet length (incl crc) high
+ * b3..n-4: packet data
+ * bn-3..bn: ethernet packet crc
+ */
+ if (unlikely(skb->len < SR_RX_OVERHEAD)) {
+ netdev_err(dev->net, "unexpected tiny rx frame\n");
+ return 0;
+ }
+
+ /* one skb may contains multiple packets */
+ while (skb->len > SR_RX_OVERHEAD) {
+ if (skb->data[0] != 0x40)
+ return 0;
+
+ /* ignore the CRC length */
+ len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+ if (len > ETH_FRAME_LEN)
+ return 0;
+
+ /* the last packet of current skb */
+ if (skb->len == (len + SR_RX_OVERHEAD)) {
+ skb_pull(skb, 3);
+ skb->len = len;
+ skb->tail = skb->data + len;
+ skb->truesize = len + sizeof(struct sk_buff);
+ return 2;
+ }
+
+ /* skb_clone is used for address align */
+ sr_skb = skb_clone(skb, GFP_ATOMIC);
+ if (!sr_skb)
+ return 0;
+
+ sr_skb->len = len;
+ sr_skb->data = skb->data + 3;
+ sr_skb->tail = skb->data + len;
+ sr_skb->truesize = len + sizeof(struct sk_buff);
+ usbnet_skb_return(dev, sr_skb);
+
+ skb_pull(skb, len + SR_RX_OVERHEAD);
+ };
+
+ return 0;
+}
+
+static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ int len;
+
+ /* SR9700 can only send out one ethernet packet at once.
+ *
+ * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
+ *
+ * b0: rx status
+ * b1: packet length (incl crc) low
+ * b2: packet length (incl crc) high
+ * b3..n-4: packet data
+ * bn-3..bn: ethernet packet crc
+ */
+
+ len = skb->len;
+
+ if (skb_headroom(skb) < SR_TX_OVERHEAD) {
+ struct sk_buff *skb2;
+
+ skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ __skb_push(skb, SR_TX_OVERHEAD);
+
+ /* usbnet adds padding if length is a multiple of packet size
+ * if so, adjust length value in header
+ */
+ if ((skb->len % dev->maxpacket) == 0)
+ len++;
+
+ skb->data[0] = len;
+ skb->data[1] = len >> 8;
+
+ return skb;
+}
+
+static void sr9700_status(struct usbnet *dev, struct urb *urb)
+{
+ int link;
+ u8 *buf;
+
+ /* format:
+ b0: net status
+ b1: tx status 1
+ b2: tx status 2
+ b3: rx status
+ b4: rx overflow
+ b5: rx count
+ b6: tx count
+ b7: gpr
+ */
+
+ if (urb->actual_length < 8)
+ return;
+
+ buf = urb->transfer_buffer;
+
+ link = !!(buf[0] & 0x40);
+ if (netif_carrier_ok(dev->net) != link) {
+ usbnet_link_change(dev, link, 1);
+ netdev_dbg(dev->net, "Link Status is: %d\n", link);
+ }
+}
+
+static int sr9700_link_reset(struct usbnet *dev)
+{
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+
+ netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
+ ecmd.speed, ecmd.duplex);
+
+ return 0;
+}
+
+static const struct driver_info sr9700_driver_info = {
+ .description = "CoreChip SR9700 USB Ethernet",
+ .flags = FLAG_ETHER,
+ .bind = sr9700_bind,
+ .rx_fixup = sr9700_rx_fixup,
+ .tx_fixup = sr9700_tx_fixup,
+ .status = sr9700_status,
+ .link_reset = sr9700_link_reset,
+ .reset = sr9700_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */
+ .driver_info = (unsigned long)&sr9700_driver_info,
+ },
+ {}, /* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr9700_usb_driver = {
+ .name = "sr9700",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(sr9700_usb_driver);
+
+MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
+MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,172 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : liujl <liujunliang_ljl@163.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _SR9700_H
+#define _SR9700_H
+
+/* sr9700 spec. register table on Linux platform */
+
+/* Network Control Reg */
+#define NCR 0x00
+#define NCR_RST (1 << 0)
+#define NCR_LBK (3 << 1)
+#define NCR_FDX (1 << 3)
+#define NCR_WAKEEN (1 << 6)
+/* Network Status Reg */
+#define NSR 0x01
+#define NSR_RXRDY (1 << 0)
+#define NSR_RXOV (1 << 1)
+#define NSR_TX1END (1 << 2)
+#define NSR_TX2END (1 << 3)
+#define NSR_TXFULL (1 << 4)
+#define NSR_WAKEST (1 << 5)
+#define NSR_LINKST (1 << 6)
+#define NSR_SPEED (1 << 7)
+/* Tx Control Reg */
+#define TCR 0x02
+#define TCR_CRC_DIS (1 << 1)
+#define TCR_PAD_DIS (1 << 2)
+#define TCR_LC_CARE (1 << 3)
+#define TCR_CRS_CARE (1 << 4)
+#define TCR_EXCECM (1 << 5)
+#define TCR_LF_EN (1 << 6)
+/* Tx Status Reg for Packet Index 1 */
+#define TSR1 0x03
+#define TSR1_EC (1 << 2)
+#define TSR1_COL (1 << 3)
+#define TSR1_LC (1 << 4)
+#define TSR1_NC (1 << 5)
+#define TSR1_LOC (1 << 6)
+#define TSR1_TLF (1 << 7)
+/* Tx Status Reg for Packet Index 2 */
+#define TSR2 0x04
+#define TSR2_EC (1 << 2)
+#define TSR2_COL (1 << 3)
+#define TSR2_LC (1 << 4)
+#define TSR2_NC (1 << 5)
+#define TSR2_LOC (1 << 6)
+#define TSR2_TLF (1 << 7)
+/* Rx Control Reg*/
+#define RCR 0x05
+#define RCR_RXEN (1 << 0)
+#define RCR_PRMSC (1 << 1)
+#define RCR_RUNT (1 << 2)
+#define RCR_ALL (1 << 3)
+#define RCR_DIS_CRC (1 << 4)
+#define RCR_DIS_LONG (1 << 5)
+/* Rx Status Reg */
+#define RSR 0x06
+#define RSR_AE (1 << 2)
+#define RSR_MF (1 << 6)
+#define RSR_RF (1 << 7)
+/* Rx Overflow Counter Reg */
+#define ROCR 0x07
+#define ROCR_ROC (0x7F << 0)
+#define ROCR_RXFU (1 << 7)
+/* Back Pressure Threshold Reg */
+#define BPTR 0x08
+#define BPTR_JPT (0x0F << 0)
+#define BPTR_BPHW (0x0F << 4)
+/* Flow Control Threshold Reg */
+#define FCTR 0x09
+#define FCTR_LWOT (0x0F << 0)
+#define FCTR_HWOT (0x0F << 4)
+/* rx/tx Flow Control Reg */
+#define FCR 0x0A
+#define FCR_FLCE (1 << 0)
+#define FCR_BKPA (1 << 4)
+#define FCR_TXPEN (1 << 5)
+#define FCR_TXPF (1 << 6)
+#define FCR_TXP0 (1 << 7)
+/* Eeprom & Phy Control Reg */
+#define EPCR 0x0B
+#define EPCR_ERRE (1 << 0)
+#define EPCR_ERPRW (1 << 1)
+#define EPCR_ERPRR (1 << 2)
+#define EPCR_EPOS (1 << 3)
+#define EPCR_WEP (1 << 4)
+/* Eeprom & Phy Address Reg */
+#define EPAR 0x0C
+#define EPAR_EROA (0x3F << 0)
+#define EPAR_PHY_ADR (0x03 << 6)
+/* Eeprom & Phy Data Reg */
+#define EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */
+/* Wakeup Control Reg */
+#define WCR 0x0F
+#define WCR_MAGICST (1 << 0)
+#define WCR_LINKST (1 << 2)
+#define WCR_MAGICEN (1 << 3)
+#define WCR_LINKEN (1 << 5)
+/* Physical Address Reg */
+#define PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */
+/* Multicast Address Reg */
+#define MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */
+/* 0x1e unused */
+/* Phy Reset Reg */
+#define PRR 0x1F
+#define PRR_PHY_RST (1 << 0)
+/* Tx sdram Write Pointer Address Low */
+#define TWPAL 0x20
+/* Tx sdram Write Pointer Address High */
+#define TWPAH 0x21
+/* Tx sdram Read Pointer Address Low */
+#define TRPAL 0x22
+/* Tx sdram Read Pointer Address High */
+#define TRPAH 0x23
+/* Rx sdram Write Pointer Address Low */
+#define RWPAL 0x24
+/* Rx sdram Write Pointer Address High */
+#define RWPAH 0x25
+/* Rx sdram Read Pointer Address Low */
+#define RRPAL 0x26
+/* Rx sdram Read Pointer Address High */
+#define RRPAH 0x27
+/* Vendor ID register */
+#define VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */
+/* Product ID register */
+#define PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */
+/* CHIP Revision register */
+#define CHIPR 0x2C
+/* 0x2D --> 0xEF unused */
+/* USB Device Address */
+#define USBDA 0xF0
+#define USBDA_USBFA (0x7F << 0)
+/* RX packet Counter Reg */
+#define RXC 0xF1
+/* Tx packet Counter & USB Status Reg */
+#define TXC_USBS 0xF2
+#define TXC_USBS_TXC0 (1 << 0)
+#define TXC_USBS_TXC1 (1 << 1)
+#define TXC_USBS_TXC2 (1 << 2)
+#define TXC_USBS_EP1RDY (1 << 5)
+#define TXC_USBS_SUSFLAG (1 << 6)
+#define TXC_USBS_RXFAULT (1 << 7)
+/* USB Control register */
+#define USBC 0xF4
+#define USBC_EP3NAK (1 << 4)
+#define USBC_EP3ACK (1 << 5)
+
+/* Register access commands and flags */
+#define SR_RD_REGS 0x00
+#define SR_WR_REGS 0x01
+#define SR_WR_REG 0x03
+#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* parameters */
+#define SR_SHARE_TIMEOUT 1000
+#define SR_EEPROM_LEN 256
+#define SR_MCAST_SIZE 8
+#define SR_MCAST_ADDR_FLAG 0x80
+#define SR_MCAST_MAX 64
+#define SR_TX_OVERHEAD 2 /* 2bytes header */
+#define SR_RX_OVERHEAD 7 /* 3bytes header + 4crc tail */
+
+#endif /* _SR9700_H */