@@ -68,7 +68,7 @@ local_bus_init(void)
get_sys_info(&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
if (lbc_hz < 66) {
lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
@@ -250,7 +250,7 @@ local_bus_init(void)
get_sys_info(&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
if (lbc_hz < 66) {
lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */
@@ -248,7 +248,7 @@ local_bus_init(void)
get_sys_info(&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
if (lbc_hz < 66) {
lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */
@@ -273,7 +273,7 @@ local_bus_init(void)
get_sys_info(&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
if (lbc_hz < 66) {
lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
@@ -247,7 +247,7 @@ phys_size_t fixed_sdram(void)
get_sys_info(&sysinfo);
printf("Configuring DDR for %s MT/s data rate\n",
- strmhz(buf, sysinfo.freqDDRBus));
+ strmhz(buf, sysinfo.freq_ddrbus));
ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
@@ -53,7 +53,7 @@ phys_size_t fixed_sdram(void)
get_sys_info(&sysinfo);
printf("Configuring DDR for %s MT/s data rate\n",
- strmhz(buf, sysinfo.freqDDRBus));
+ strmhz(buf, sysinfo.freq_ddrbus));
ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
@@ -65,8 +65,8 @@ local_bus_init(void)
get_sys_info(&sysinfo);
- lbc_mhz = sysinfo.freqLocalBus / 1000000;
- clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
+ lbc_mhz = sysinfo.freq_localbus / 1000000;
+ clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus;
debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
@@ -143,7 +143,7 @@ void local_bus_init (void)
get_sys_info (&sysinfo);
clkdiv = lbc->lcrr & LCRR_CLKDIV;
- lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+ lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
if (lbc_mhz >= 66)
@@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
unsigned int datarate;
get_sys_info(&sysinfo);
- datarate = sysinfo.freqDDRBus / 1000 / 1000;
+ datarate = sysinfo.freq_ddrbus / 1000 / 1000;
for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
if ((bopts[i].datarate_mhz_low <= datarate) &&
@@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
/* Set eSPI BRG clock source */
get_sys_info(&sysinfo);
- spibrg = sysinfo.freqSystemBus / 2;
+ spibrg = sysinfo.freq_systembus / 2;
fsl->div16 = 0;
if ((spibrg / max_hz) > 32) {
fsl->div16 = ESPI_CSMODE_DIV16;
Different board,driver files use fields defined in MPC85xx_SYS_INFO and MPC86xx_SYS_INFO structure. To fix CamelCase warning, field name has been updated in the mentioned structure. So update variable names as per new the structures. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> --- board/freescale/mpc8540ads/mpc8540ads.c | 2 +- board/freescale/mpc8541cds/mpc8541cds.c | 2 +- board/freescale/mpc8555cds/mpc8555cds.c | 2 +- board/freescale/mpc8560ads/mpc8560ads.c | 2 +- board/freescale/p1_p2_rdb_pc/ddr.c | 2 +- board/freescale/p1_twr/ddr.c | 2 +- board/sbc8548/sbc8548.c | 4 ++-- board/socrates/socrates.c | 2 +- board/xes/xpedite537x/ddr.c | 2 +- drivers/spi/fsl_espi.c | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-)