@@ -119,7 +119,7 @@ void s_init(void)
*/
int board_init(void)
{
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
@@ -135,7 +135,7 @@ int board_init(void)
{
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
@@ -371,7 +371,7 @@ int board_init(void)
STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
#endif
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
@@ -161,7 +161,7 @@ void s_init(void)
*/
int board_init(void)
{
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
@@ -131,10 +131,9 @@
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
/* Platform/Board specific defs */
@@ -122,7 +122,7 @@
* memtest works on 8 MB in DRAM after skipping 32MB from
* start addr of ram disk
*/
-#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (64 << 20))
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ (8 * 1024 * 1024))
@@ -146,10 +146,9 @@
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 19) /* 512MiB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
/* Platform/Board specific defs */
@@ -116,7 +116,7 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ PHYS_DRAM_1_SIZE - (8 << 12))
@@ -136,11 +136,10 @@
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this for CONFIG_SYS_SDRAM_BASE. But then we kept on referencing PHYS_DRAM_1 in other places. Change to directly setting CONFIG_SYS_DRAM_BASE and then using that name in code. Signed-off-by: Tom Rini <trini@ti.com> --- board/isee/igep0033/board.c | 2 +- board/phytec/pcm051/board.c | 2 +- board/ti/am335x/board.c | 2 +- board/ti/ti814x/evm.c | 2 +- include/configs/igep0033.h | 3 +-- include/configs/pcm051.h | 5 ++--- include/configs/ti814x_evm.h | 5 ++--- 7 files changed, 9 insertions(+), 12 deletions(-)