Patchwork [2/2] ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers

login
register
mail settings
Submitter Lothar Waßmann
Date Aug. 8, 2013, 1:11 p.m.
Message ID <1375967472-7755-3-git-send-email-LW@KARO-electronics.de>
Download mbox | patch
Permalink /patch/265724/
State New
Headers show

Comments

Lothar Waßmann - Aug. 8, 2013, 1:11 p.m.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx23-evk.dts           |   10 +-
 arch/arm/boot/dts/imx23-olinuxino.dts     |    6 +-
 arch/arm/boot/dts/imx23-stmp378x_devb.dts |    6 +-
 arch/arm/boot/dts/imx23.dtsi              |  163 +++++++-------
 arch/arm/boot/dts/imx28-apf28.dts         |    2 +-
 arch/arm/boot/dts/imx28-apf28dev.dts      |   24 +-
 arch/arm/boot/dts/imx28-apx4devkit.dts    |   38 ++--
 arch/arm/boot/dts/imx28-cfa10036.dts      |    8 +-
 arch/arm/boot/dts/imx28-cfa10037.dts      |    6 +-
 arch/arm/boot/dts/imx28-cfa10049.dts      |   84 ++++----
 arch/arm/boot/dts/imx28-cfa10055.dts      |   56 +++---
 arch/arm/boot/dts/imx28-cfa10056.dts      |   20 +-
 arch/arm/boot/dts/imx28-cfa10057.dts      |   48 ++--
 arch/arm/boot/dts/imx28-cfa10058.dts      |   12 +-
 arch/arm/boot/dts/imx28-evk.dts           |   32 ++--
 arch/arm/boot/dts/imx28-m28evk.dts        |   16 +-
 arch/arm/boot/dts/imx28-sps1.dts          |    8 +-
 arch/arm/boot/dts/imx28-tx28.dts          |   85 ++++----
 arch/arm/boot/dts/imx28.dtsi              |  345 +++++++++++++++--------------
 19 files changed, 486 insertions(+), 483 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 185c7c0..fdd8b27 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,10 +45,10 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index fc766ae..f575434 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,7 +12,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,7 +40,7 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -50,7 +50,7 @@ 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 85c3864..2c8a9b0 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale STMP378x Development Board";
@@ -39,8 +39,8 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 28b5ce2..1c2cb1c 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -9,7 +9,8 @@ 
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/mx23.h>
 
 / {
 	interrupt-parent = <&icoll>;
@@ -137,8 +138,8 @@ 
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
-						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -148,10 +149,10 @@ 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
-						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
-						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
-						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -161,8 +162,8 @@ 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
-						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -172,23 +173,23 @@ 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
-						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
-						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
-						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
-						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
-						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
-						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
-						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
-						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
-						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
-						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
-						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
-						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -197,9 +198,9 @@ 
 
 				gpmi_pins_fixup: gpmi-pins-fixup {
 					fsl,pinmux-ids = <
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
 					>;
 					fsl,drive-strength = <2>;
 				};
@@ -207,12 +208,12 @@ 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -222,17 +223,17 @@ 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
-						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
-						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
-						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -241,8 +242,8 @@ 
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
 					fsl,pinmux-ids = <
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
 					fsl,pull-up = <0>;
 				};
@@ -250,7 +251,7 @@ 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+						MX23_PAD_PWM2__PWM2
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -260,34 +261,34 @@ 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
-						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
-						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
-						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
-						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
-						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
-						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
-						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
-						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
-						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
-						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -297,10 +298,10 @@ 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
-						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
-						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
-						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7eb0758..7198fe3 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index b602494..7d923cc 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,7 +10,7 @@ 
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
@@ -41,13 +41,13 @@ 
 				hog_pins_apf28dev: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
-						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
-						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
-						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
-						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -57,10 +57,10 @@ 
 				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 0e7fed4..cb19dc1 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,5 +1,5 @@ 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
@@ -40,13 +40,13 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
-						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
-						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -56,10 +56,10 @@ 
 				lcdif_pins_apx4: lcdif-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -69,12 +69,12 @@ 
 				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
-						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
-						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
-						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
-						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -83,7 +83,7 @@ 
 
 				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
 					fsl,pinmux-ids = <
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
 					fsl,drive-strength = <2>;
 					fsl,pull-up = <0>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1ec8c94..2474207 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -26,7 +26,7 @@ 
 				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -36,7 +36,7 @@ 
 				led_pins_cfa10036: leds-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+						MX28_PAD_AUART1_RX__GPIO_3_4
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -46,7 +46,7 @@ 
 				usb0_otg_cfa10036: otg-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+						MX28_PAD_GPMI_RDY0__USB0_ID
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 182b99f..42a9a99 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -13,7 +13,7 @@ 
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
@@ -25,7 +25,7 @@ 
 				usb_pins_cfa10037: usb-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -35,7 +35,7 @@ 
 				mac0_pins_cfa10037: mac0-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 06e4cfa..9ee2566 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -13,7 +13,7 @@ 
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
@@ -25,7 +25,7 @@ 
 				usb_pins_cfa10049: usb-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -35,8 +35,8 @@ 
 				i2cmux_pins_cfa10049: i2cmux-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
-						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -46,7 +46,7 @@ 
 				mac0_pins_cfa10049: mac0-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -56,7 +56,7 @@ 
 				pca_pins_cfa10049: pca-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+						MX28_PAD_SSP2_SS0__GPIO_2_19
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -66,8 +66,8 @@ 
 				rotary_pins_cfa10049: rotary-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -77,7 +77,7 @@ 
 				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -87,10 +87,10 @@ 
 				spi2_pins_cfa10049: spi2-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -100,11 +100,11 @@ 
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
-						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
-						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -114,24 +114,24 @@ 
 				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -141,10 +141,10 @@ 
 				lcdif_pins_cfa10049: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -154,7 +154,7 @@ 
 				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -164,7 +164,7 @@ 
 				w1_gpio_pins: w1-gpio@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						MX28_PAD_LCD_D21__GPIO_1_21
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 171bcbe..8b262a2 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,7 +14,7 @@ 
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
@@ -26,10 +26,10 @@ 
 				spi2_pins_cfa10055: spi2-cfa10055@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -39,24 +39,24 @@ 
 				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -66,10 +66,10 @@ 
 				lcdif_pins_cfa10055: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -79,7 +79,7 @@ 
 				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index b45dd0e..f651998 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -13,7 +13,7 @@ 
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10056 Board";
@@ -25,10 +25,10 @@ 
 				spi2_pins_cfa10056: spi2-cfa10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -38,10 +38,10 @@ 
 				lcdif_pins_cfa10056: lcdif-10056@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -51,7 +51,7 @@ 
 				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 0333c05..76430ca 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,7 +14,7 @@ 
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
@@ -26,7 +26,7 @@ 
 				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -36,24 +36,24 @@ 
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -63,10 +63,10 @@ 
 				lcdif_pins_cfa10057: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 64c64c5..502be77 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -14,7 +14,7 @@ 
  * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10058 Board";
@@ -26,7 +26,7 @@ 
 				usb_pins_cfa10058: usb-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -36,10 +36,10 @@ 
 				lcdif_pins_cfa10058: lcdif-10058@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 15715d9..dff2279 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
@@ -70,14 +70,14 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
-						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
-						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
-						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -87,7 +87,7 @@ 
 				led_pin_gpio3_5: led_gpio3_5@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -97,8 +97,8 @@ 
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -108,10 +108,10 @@ 
 				lcdif_pins_evk: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 0d322a2..9f3271d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
@@ -92,11 +92,11 @@ 
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
-						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
-						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
-						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -106,8 +106,8 @@ 
 				lcdif_pins_m28: lcdif-m28@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
-						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 6c6a544..4613522 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -10,7 +10,7 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
@@ -29,9 +29,9 @@ 
 				hog_pins_a: hog-gpios@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
-						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
-						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 866af60..a82ac3d 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -11,7 +11,8 @@ 
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
@@ -457,9 +458,9 @@ 
 	edt_ft5x06_pins: edt-ft5x06-pins@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x2063 /* MX28_PAD_SSP0_DATA6__GPIO_2_6 - RESET */
-			0x2053 /* MX28_PAD_SSP0_DATA5__GPIO_2_5 - IRQ */
-			0x4093 /* MX28_PAD_ENET0_RXD2__GPIO_4_9 - WAKE */
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -469,7 +470,7 @@ 
 	flexcan_xcvr_pins_a: flexcan-xcvr {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x1003 /* MX28_PAD_LCD_D00__GPIO_1_0 */
+			MX28_PAD_LCD_D00__GPIO_1_0
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -479,7 +480,7 @@ 
 	hog_pins_a: hog@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 - module LED */
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -490,29 +491,29 @@ 
 		reg = <0>;
 		fsl,pinmux-ids = <
 			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
-			0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-			0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-			0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-			0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-			0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-			0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-			0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-			0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-			0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-			0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-			0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-			0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-			0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-			0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-			0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-			0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-			0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-			0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-			0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-			0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-			0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-			0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-			0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -522,8 +523,8 @@ 
 	lcdif_ctrl_pins_a: lcdif-ctrl@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x11f3 /* MX28_PAD_LCD_ENABLE__GPIO_1_31 - Enable */
-			0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30  - Reset */
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -533,15 +534,15 @@ 
 	mac0_pins_gpio: mac0-gpio-mode@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-			0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-			0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-			0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-			0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-			0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-			0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-			0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-			0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -551,7 +552,7 @@ 
 	pca9554_pins: pca9554-pins@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+			MX28_PAD_PWM3__GPIO_3_28
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -561,7 +562,7 @@ 
 	tsc2007_pins: tsc2007-pins@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x3143 /* MX28_PAD_SAIF0_MCLK__GPIO_3_20 - TSC2007 IRQ */
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index f941648..e459d63 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,7 +9,8 @@ 
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/mx28.h>
 
 / {
 	interrupt-parent = <&icoll>;
@@ -207,8 +208,8 @@ 
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -218,8 +219,8 @@ 
 				duart_pins_b: duart@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -229,10 +230,10 @@ 
 				duart_4pins_a: duart-4pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -242,21 +243,21 @@ 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -265,9 +266,9 @@ 
 
 				gpmi_status_cfg: gpmi-status-cfg {
 					fsl,pinmux-ids = <
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
 					fsl,drive-strength = <2>;
 				};
@@ -275,10 +276,10 @@ 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
-						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
-						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -288,8 +289,8 @@ 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -299,10 +300,10 @@ 
 				auart1_pins_a: auart1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
-						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
-						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -312,8 +313,8 @@ 
 				auart1_2pins_a: auart1-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -323,8 +324,8 @@ 
 				auart2_2pins_a: auart2-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
-						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -334,8 +335,8 @@ 
 				auart2_2pins_b: auart2-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
-						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -345,10 +346,10 @@ 
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
-						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
-						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -358,8 +359,8 @@ 
 				auart3_2pins_a: auart3-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
-						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -369,8 +370,8 @@ 
 				auart3_2pins_b: auart3-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -380,8 +381,8 @@ 
 				auart4_2pins_a: auart4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
-						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -391,15 +392,15 @@ 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
-						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
-						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
-						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
-						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
-						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
-						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
-						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
-						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -409,12 +410,12 @@ 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
-						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
-						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
-						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
-						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
-						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -424,17 +425,17 @@ 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
-						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
-						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
-						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -444,13 +445,13 @@ 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -459,14 +460,14 @@ 
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
 					fsl,pinmux-ids = <
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
 					fsl,pull-up = <0>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
 					fsl,pinmux-ids = <
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
 					fsl,drive-strength = <2>;
 					fsl,pull-up = <0>;
@@ -475,8 +476,8 @@ 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
-						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -486,8 +487,8 @@ 
 				i2c0_pins_b: i2c0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
-						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -497,8 +498,8 @@ 
 				i2c1_pins_a: i2c1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
-						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -508,10 +509,10 @@ 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -521,9 +522,9 @@ 
 				saif0_pins_b: saif0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -533,7 +534,7 @@ 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -543,7 +544,7 @@ 
 				pwm0_pins_a: pwm0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+						MX28_PAD_PWM0__PWM_0
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -553,7 +554,7 @@ 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+						MX28_PAD_PWM2__PWM_2
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -563,7 +564,7 @@ 
 				pwm3_pins_a: pwm3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+						MX28_PAD_PWM3__PWM_3
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -573,7 +574,7 @@ 
 				pwm3_pins_b: pwm3@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+						MX28_PAD_SAIF0_MCLK__PWM_3
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -583,7 +584,7 @@ 
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+						MX28_PAD_PWM4__PWM_4
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -593,30 +594,30 @@ 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -626,22 +627,22 @@ 
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -651,10 +652,10 @@ 
 				lcdif_sync_pins_a: lcdif-sync@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -664,8 +665,8 @@ 
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -675,8 +676,8 @@ 
 				can1_pins_a: can1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -686,10 +687,10 @@ 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -699,12 +700,12 @@ 
 				spi3_pins_a: spi3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
-						0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
-						0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
-						0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
-						0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
-						0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -714,7 +715,7 @@ 
 				usbphy0_pins_a: usbphy0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -724,7 +725,7 @@ 
 				usbphy0_pins_b: usbphy0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -734,8 +735,8 @@ 
 				usbphy0_pins_c: usbphy0@2 {
 					reg = <2>;
 					fsl,pinmux-ids = <
-						0x0123 /* MX28_PAD_GPMI_CE2N__GPIO_0_18 - USBOTG_VBUSEN */
-						0x0133 /* MX28_PAD_GPMI_CE3N__GPIO_0_19 - USBOTH_OC */
+						MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+						MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -745,7 +746,7 @@ 
 				usbphy1_pins_a: usbphy1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -755,8 +756,8 @@ 
 				usbphy1_pins_b: usbphy1@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x31b3 /* MX28_PAD_SPDIF__GPIO_3_27 - USBH_VBUSEN */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 - USBH_OC */
+						MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+						MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;