Patchwork [v2,02/14] mtd: nand: pxa3xx: Handle ECC and DMA enable/disable properly

login
register
mail settings
Submitter Ezequiel Garcia
Date Aug. 7, 2013, 12:31 p.m.
Message ID <1375878679-18098-3-git-send-email-ezequiel.garcia@free-electrons.com>
Download mbox | patch
Permalink /patch/265490/
State Superseded
Headers show

Comments

Ezequiel Garcia - Aug. 7, 2013, 12:31 p.m.
When ECC is not selected, the ECC enable bit must be cleared
in the NAND control register. Same applies to DMA.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 2582e1f..e3cd903 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -314,8 +314,17 @@  static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
 	uint32_t ndcr;
 
 	ndcr = host->reg_ndcr;
-	ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
-	ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
+
+	if (info->use_ecc)
+		ndcr |= NDCR_ECC_EN;
+	else
+		ndcr &= ~NDCR_ECC_EN;
+
+	if (info->use_dma)
+		ndcr |= NDCR_DMA_EN;
+	else
+		ndcr &= ~NDCR_DMA_EN;
+
 	ndcr |= NDCR_ND_RUN;
 
 	/* clear status bits and run */