| Message ID | 1375775602-9057-3-git-send-email-kengyu@canonical.com |
|---|---|
| State | Accepted |
| Headers | show |
On 06/08/13 08:53, Keng-Yu Lin wrote: > Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> > --- > klog-0001/klog-0001.log | 74 ++++++++++++++++++++++++------------------------- > klog-0001/klog-0002.log | 6 ++-- > 2 files changed, 40 insertions(+), 40 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 0274ff9..f2da037 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -3070,7 +3070,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3085,7 +3085,7 @@ klog (20110112/uteval-103) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3304,7 +3304,7 @@ klog (Node dd8159d8), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3319,7 +3319,7 @@ klog dd8159d8), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5027,7 +5027,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5042,7 +5042,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5102,7 +5102,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5117,7 +5117,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7762,7 +7762,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7777,7 +7777,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/uteval-103) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7909,7 +7909,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7924,7 +7924,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -8657,7 +8657,7 @@ klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -8672,7 +8672,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -9529,7 +9529,7 @@ klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -9544,7 +9544,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -12728,7 +12728,7 @@ klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -12743,7 +12743,7 @@ klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13373,7 +13373,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13388,7 +13388,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13579,7 +13579,7 @@ klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13594,7 +13594,7 @@ klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14205,7 +14205,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14220,7 +14220,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14517,7 +14517,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14532,7 +14532,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14556,7 +14556,7 @@ klog ffff8800b3832600), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14571,7 +14571,7 @@ klog ffff8800b382b840), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14804,16 +14804,16 @@ klog > klog ADVICE: Method _BQC (Brightness Query Current) returned an > klog invalid display brightness level. > klog > -klog FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1, > -klog MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: > -klog Duplicate ACPI video bus devices for the same VGA > -klog controller, please try module parameter > -klog "video.allow_duplicates=1"if the current driver doesn't > -klog work. > +klog FAILED [LOW] KlogDuplicateACPIVideoBus: Test 1, LOW Kernel > +klog message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video > +klog bus devices for the same VGA controller, please try module > +klog parameter "video.allow_duplicates=1"if the current driver > +klog doesn't work. > klog > -klog ADVICE: Try video module parameter > -klog video.allow_duplicates=1 if the current driver does't > -klog work. > +klog ADVICE: The ACPI video driver has found a duplicate ACPI > +klog video bus device for the same VGA controller. If the > +klog current driver does not work, one can try to work around > +klog this using the video.allow_duplicates=1 kernel parameter. > klog > klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH > klog Kernel message: [ 20.634744] ACPI Warning for > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index 445cc44..43e8c1b 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -1266,7 +1266,7 @@ summary klog: HIGH Kernel message: [ 44.661543] ACPI Warning for _SB_.P > summary klog: HIGH Kernel message: [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303) > summary klog: HIGH Kernel message: [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303) > summary > -summary Medium failures: 332 > +summary Medium failures: 331 > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20110112/tbutils-314) > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x65, should be 0x68 (20110112/tbutils-314) > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110112/tbutils-314) > @@ -1598,9 +1598,9 @@ summary klog: MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrec > summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect checksum in table [_RAT] - 00, should be 63 (20090903/tbutils-314) > summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) > summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) > -summary klog: MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > summary > -summary Low failures: NONE > +summary Low failures: 1 > +summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > summary > summary Other failures: NONE > summary > Acked-by: Colin Ian King <colin.king@canonical.com>
On 08/06/2013 03:53 PM, Keng-Yu Lin wrote: > Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> > --- > klog-0001/klog-0001.log | 74 ++++++++++++++++++++++++------------------------- > klog-0001/klog-0002.log | 6 ++-- > 2 files changed, 40 insertions(+), 40 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 0274ff9..f2da037 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -3070,7 +3070,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3085,7 +3085,7 @@ klog (20110112/uteval-103) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3304,7 +3304,7 @@ klog (Node dd8159d8), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -3319,7 +3319,7 @@ klog dd8159d8), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5027,7 +5027,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5042,7 +5042,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5102,7 +5102,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -5117,7 +5117,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7762,7 +7762,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7777,7 +7777,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/uteval-103) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7909,7 +7909,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -7924,7 +7924,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -8657,7 +8657,7 @@ klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -8672,7 +8672,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -9529,7 +9529,7 @@ klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -9544,7 +9544,7 @@ klog AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -12728,7 +12728,7 @@ klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -12743,7 +12743,7 @@ klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13373,7 +13373,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13388,7 +13388,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13579,7 +13579,7 @@ klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -13594,7 +13594,7 @@ klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14205,7 +14205,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14220,7 +14220,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14517,7 +14517,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14532,7 +14532,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14556,7 +14556,7 @@ klog ffff8800b3832600), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14571,7 +14571,7 @@ klog ffff8800b382b840), AE_AML_BUFFER_LIMIT > klog > klog ADVICE: Generally this error occurs because of access > klog outside of a buffer. This occurs for several reasons: a) A > -klog field does not fit withing the current length of a buffer, > +klog field does not fit within the current length of a buffer, > klog b) an ACPI table load did not fit into a buffer, c) An > klog attempt to convert a buffer into an integer failed because > klog the buffer was zero sized, d) a SMBus/IPMI > @@ -14804,16 +14804,16 @@ klog > klog ADVICE: Method _BQC (Brightness Query Current) returned an > klog invalid display brightness level. > klog > -klog FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1, > -klog MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: > -klog Duplicate ACPI video bus devices for the same VGA > -klog controller, please try module parameter > -klog "video.allow_duplicates=1"if the current driver doesn't > -klog work. > +klog FAILED [LOW] KlogDuplicateACPIVideoBus: Test 1, LOW Kernel > +klog message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video > +klog bus devices for the same VGA controller, please try module > +klog parameter "video.allow_duplicates=1"if the current driver > +klog doesn't work. > klog > -klog ADVICE: Try video module parameter > -klog video.allow_duplicates=1 if the current driver does't > -klog work. > +klog ADVICE: The ACPI video driver has found a duplicate ACPI > +klog video bus device for the same VGA controller. If the > +klog current driver does not work, one can try to work around > +klog this using the video.allow_duplicates=1 kernel parameter. > klog > klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH > klog Kernel message: [ 20.634744] ACPI Warning for > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index 445cc44..43e8c1b 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -1266,7 +1266,7 @@ summary klog: HIGH Kernel message: [ 44.661543] ACPI Warning for _SB_.P > summary klog: HIGH Kernel message: [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303) > summary klog: HIGH Kernel message: [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303) > summary > -summary Medium failures: 332 > +summary Medium failures: 331 > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20110112/tbutils-314) > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x65, should be 0x68 (20110112/tbutils-314) > summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110112/tbutils-314) > @@ -1598,9 +1598,9 @@ summary klog: MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrec > summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect checksum in table [_RAT] - 00, should be 63 (20090903/tbutils-314) > summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) > summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) > -summary klog: MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > summary > -summary Low failures: NONE > +summary Low failures: 1 > +summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > summary > summary Other failures: NONE > summary > Acked-by: Ivan Hu <ivan.hu@canonical.com>
diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log index 0274ff9..f2da037 100644 --- a/klog-0001/klog-0001.log +++ b/klog-0001/klog-0001.log @@ -3070,7 +3070,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -3085,7 +3085,7 @@ klog (20110112/uteval-103) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -3304,7 +3304,7 @@ klog (Node dd8159d8), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -3319,7 +3319,7 @@ klog dd8159d8), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -5027,7 +5027,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -5042,7 +5042,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -5102,7 +5102,7 @@ klog AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -5117,7 +5117,7 @@ klog AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -7762,7 +7762,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -7777,7 +7777,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/uteval-103) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -7909,7 +7909,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -7924,7 +7924,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -8657,7 +8657,7 @@ klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -8672,7 +8672,7 @@ klog AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -9529,7 +9529,7 @@ klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -9544,7 +9544,7 @@ klog AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -12728,7 +12728,7 @@ klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -12743,7 +12743,7 @@ klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -13373,7 +13373,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -13388,7 +13388,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -13579,7 +13579,7 @@ klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -13594,7 +13594,7 @@ klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14205,7 +14205,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14220,7 +14220,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14517,7 +14517,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14532,7 +14532,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536) klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14556,7 +14556,7 @@ klog ffff8800b3832600), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14571,7 +14571,7 @@ klog ffff8800b382b840), AE_AML_BUFFER_LIMIT klog klog ADVICE: Generally this error occurs because of access klog outside of a buffer. This occurs for several reasons: a) A -klog field does not fit withing the current length of a buffer, +klog field does not fit within the current length of a buffer, klog b) an ACPI table load did not fit into a buffer, c) An klog attempt to convert a buffer into an integer failed because klog the buffer was zero sized, d) a SMBus/IPMI @@ -14804,16 +14804,16 @@ klog klog ADVICE: Method _BQC (Brightness Query Current) returned an klog invalid display brightness level. klog -klog FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1, -klog MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: -klog Duplicate ACPI video bus devices for the same VGA -klog controller, please try module parameter -klog "video.allow_duplicates=1"if the current driver doesn't -klog work. +klog FAILED [LOW] KlogDuplicateACPIVideoBus: Test 1, LOW Kernel +klog message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video +klog bus devices for the same VGA controller, please try module +klog parameter "video.allow_duplicates=1"if the current driver +klog doesn't work. klog -klog ADVICE: Try video module parameter -klog video.allow_duplicates=1 if the current driver does't -klog work. +klog ADVICE: The ACPI video driver has found a duplicate ACPI +klog video bus device for the same VGA controller. If the +klog current driver does not work, one can try to work around +klog this using the video.allow_duplicates=1 kernel parameter. klog klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH klog Kernel message: [ 20.634744] ACPI Warning for diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log index 445cc44..43e8c1b 100644 --- a/klog-0001/klog-0002.log +++ b/klog-0001/klog-0002.log @@ -1266,7 +1266,7 @@ summary klog: HIGH Kernel message: [ 44.661543] ACPI Warning for _SB_.P summary klog: HIGH Kernel message: [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303) summary klog: HIGH Kernel message: [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303) summary -summary Medium failures: 332 +summary Medium failures: 331 summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20110112/tbutils-314) summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x65, should be 0x68 (20110112/tbutils-314) summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110112/tbutils-314) @@ -1598,9 +1598,9 @@ summary klog: MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrec summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect checksum in table [_RAT] - 00, should be 63 (20090903/tbutils-314) summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) -summary klog: MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. summary -summary Low failures: NONE +summary Low failures: 1 +summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. summary summary Other failures: NONE summary
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> --- klog-0001/klog-0001.log | 74 ++++++++++++++++++++++++------------------------- klog-0001/klog-0002.log | 6 ++-- 2 files changed, 40 insertions(+), 40 deletions(-)