diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index e537fcf..0304b12 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -13,7 +13,7 @@ ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_SPI_LOAD)	+= spi_spl_load.o
 endif
 
-COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
+COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash_probe.o spi_flash_ops.o spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
 COBJS-$(CONFIG_SPI_FLASH_EON)	+= eon.o
 COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE)	+= gigadevice.o
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 9814395..ddbdda0 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -8,23 +8,7 @@
  */
 
 #include <common.h>
-#include <fdtdec.h>
-#include <malloc.h>
 #include <spi.h>
-#include <spi_flash.h>
-#include <watchdog.h>
-
-#include "spi_flash_internal.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void spi_flash_addr(u32 addr, u8 *cmd)
-{
-	/* cmd[0] is actual command */
-	cmd[1] = addr >> 16;
-	cmd[2] = addr >> 8;
-	cmd[3] = addr >> 0;
-}
 
 static int spi_flash_read_write(struct spi_slave *spi,
 				const u8 *cmd, size_t cmd_len,
@@ -52,562 +36,19 @@ static int spi_flash_read_write(struct spi_slave *spi,
 	return ret;
 }
 
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
-{
-	return spi_flash_cmd_read(spi, &cmd, 1, response, len);
-}
-
 int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
 		size_t cmd_len, void *data, size_t data_len)
 {
 	return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
 }
 
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
-		const void *data, size_t data_len)
-{
-	return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
-}
-
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
-	struct spi_slave *spi = flash->spi;
-	unsigned long timebase;
-	int ret;
-	u8 status;
-	u8 check_status = 0x0;
-	u8 poll_bit = STATUS_WIP;
-	u8 cmd = flash->poll_cmd;
-
-	if (cmd == CMD_FLAG_STATUS) {
-		poll_bit = STATUS_PEC;
-		check_status = poll_bit;
-	}
-
-	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
-	if (ret) {
-		debug("SF: fail to read %s status register\n",
-		      cmd == CMD_READ_STATUS ? "read" : "flag");
-		return ret;
-	}
-
-	timebase = get_timer(0);
-	do {
-		WATCHDOG_RESET();
-
-		ret = spi_xfer(spi, 8, NULL, &status, 0);
-		if (ret)
-			return -1;
-
-		if ((status & poll_bit) == check_status)
-			break;
-
-	} while (get_timer(timebase) < timeout);
-
-	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
-	if ((status & poll_bit) == check_status)
-		return 0;
-
-	/* Timed out */
-	debug("SF: time out!\n");
-	return -1;
-}
-
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
-		size_t cmd_len, const void *buf, size_t buf_len)
-{
-	struct spi_slave *spi = flash->spi;
-	unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
-	int ret;
-
-	if (buf == NULL)
-		timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
-
-	ret = spi_claim_bus(flash->spi);
-	if (ret) {
-		debug("SF: unable to claim SPI bus\n");
-		return ret;
-	}
-
-	ret = spi_flash_cmd_write_enable(flash);
-	if (ret < 0) {
-		debug("SF: enabling write failed\n");
-		return ret;
-	}
-
-	ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
-	if (ret < 0) {
-		debug("SF: write cmd failed\n");
-		return ret;
-	}
-
-	ret = spi_flash_cmd_wait_ready(flash, timeout);
-	if (ret < 0) {
-		debug("SF: write %s timed out\n",
-		      timeout == SPI_FLASH_PROG_TIMEOUT ?
-			"program" : "page erase");
-		return ret;
-	}
-
-	spi_release_bus(spi);
-
-	return ret;
-}
-
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
-{
-	u32 erase_size;
-	u8 cmd[4];
-	int ret = -1;
-
-	erase_size = flash->sector_size;
-	if (offset % erase_size || len % erase_size) {
-		debug("SF: Erase offset/length not multiple of erase size\n");
-		return -1;
-	}
-
-	if (erase_size == 4096)
-		cmd[0] = CMD_ERASE_4K;
-	else
-		cmd[0] = CMD_ERASE_64K;
-
-	while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-		u8 bank_sel;
-
-		bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-		if (ret) {
-			debug("SF: fail to set bank%d\n", bank_sel);
-			return ret;
-		}
-#endif
-		spi_flash_addr(offset, cmd);
-
-		debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-		      cmd[2], cmd[3], offset);
-
-		ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
-		if (ret < 0) {
-			debug("SF: erase failed\n");
-			break;
-		}
-
-		offset += erase_size;
-		len -= erase_size;
-	}
-
-	return ret;
-}
-
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
-		size_t len, const void *buf)
-{
-	unsigned long byte_addr, page_size;
-	size_t chunk_len, actual;
-	u8 cmd[4];
-	int ret = -1;
-
-	page_size = flash->page_size;
-
-	cmd[0] = CMD_PAGE_PROGRAM;
-	for (actual = 0; actual < len; actual += chunk_len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-		u8 bank_sel;
-
-		bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-		if (ret) {
-			debug("SF: fail to set bank%d\n", bank_sel);
-			return ret;
-		}
-#endif
-		byte_addr = offset % page_size;
-		chunk_len = min(len - actual, page_size - byte_addr);
-
-		if (flash->spi->max_write_size)
-			chunk_len = min(chunk_len, flash->spi->max_write_size);
-
-		spi_flash_addr(offset, cmd);
-
-		debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
-		      buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-
-		ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
-					buf + actual, chunk_len);
-		if (ret < 0) {
-			debug("SF: write failed\n");
-			break;
-		}
-
-		offset += chunk_len;
-	}
-
-	return ret;
-}
-
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
-		size_t cmd_len, void *data, size_t data_len)
-{
-	struct spi_slave *spi = flash->spi;
-	int ret;
-
-	ret = spi_claim_bus(flash->spi);
-	if (ret) {
-		debug("SF: unable to claim SPI bus\n");
-		return ret;
-	}
-
-	ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
-	if (ret < 0) {
-		debug("SF: read cmd failed\n");
-		return ret;
-	}
-
-	spi_release_bus(spi);
-
-	return ret;
-}
-
-int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
-		size_t len, void *data)
-{
-	u8 cmd[5], bank_sel = 0;
-	u32 remain_len, read_len;
-	int ret = -1;
-
-	/* Handle memory-mapped SPI */
-	if (flash->memory_map) {
-		memcpy(data, flash->memory_map + offset, len);
-		return 0;
-	}
-
-	cmd[0] = CMD_READ_ARRAY_FAST;
-	cmd[4] = 0x00;
-
-	while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
-		bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
-		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-		if (ret) {
-			debug("SF: fail to set bank%d\n", bank_sel);
-			return ret;
-		}
-#endif
-		remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
-		if (len < remain_len)
-			read_len = len;
-		else
-			read_len = remain_len;
-
-		spi_flash_addr(offset, cmd);
-
-		ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
-							data, read_len);
-		if (ret < 0) {
-			debug("SF: read failed\n");
-			break;
-		}
-
-		offset += read_len;
-		len -= read_len;
-		data += read_len;
-	}
-
-	return ret;
-}
-
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
-{
-	u8 cmd;
-	int ret;
-
-	cmd = CMD_WRITE_STATUS;
-	ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
-	if (ret < 0) {
-		debug("SF: fail to write status register\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_SPI_FLASH_BAR
-int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
-{
-	u8 cmd;
-	int ret;
-
-	if (flash->bank_curr == bank_sel) {
-		debug("SF: not require to enable bank%d\n", bank_sel);
-		return 0;
-	}
-
-	cmd = flash->bank_write_cmd;
-	ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
-	if (ret < 0) {
-		debug("SF: fail to write bank register\n");
-		return ret;
-	}
-	flash->bank_curr = bank_sel;
-
-	return 0;
-}
-
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
-{
-	u8 cmd;
-	u8 curr_bank = 0;
-
-	/* discover bank cmds */
-	switch (idcode0) {
-	case SPI_FLASH_SPANSION_IDCODE0:
-		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
-		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
-		break;
-	case SPI_FLASH_STMICRO_IDCODE0:
-	case SPI_FLASH_WINBOND_IDCODE0:
-		flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
-		flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
-		break;
-	default:
-		printf("SF: Unsupported bank commands %02x\n", idcode0);
-		return -1;
-	}
-
-	/* read the bank reg - on which bank the flash is in currently */
-	cmd = flash->bank_read_cmd;
-	if (flash->size > SPI_FLASH_16MB_BOUN) {
-		if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
-			debug("SF: fail to read bank addr register\n");
-			return -1;
-		}
-		flash->bank_curr = curr_bank;
-	} else {
-		flash->bank_curr = curr_bank;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
-	fdt_addr_t addr;
-	fdt_size_t size;
-	int node;
-
-	/* If there is no node, do nothing */
-	node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
-	if (node < 0)
-		return 0;
-
-	addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
-	if (addr == FDT_ADDR_T_NONE) {
-		debug("%s: Cannot decode address\n", __func__);
-		return 0;
-	}
-
-	if (flash->size != size) {
-		debug("%s: Memory map must cover entire device\n", __func__);
-		return -1;
-	}
-	flash->memory_map = (void *)addr;
-
-	return 0;
-}
-#endif /* CONFIG_OF_CONTROL */
-
-/*
- * The following table holds all device probe functions
- *
- * shift:  number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe:  the function to call
- *
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
- *
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
- *
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value.  IDCODE_PART_LEN generally shouldn't be
- * changed.  This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
- *
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below).  In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
- */
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
-	const u8 shift;
-	const u8 idcode;
-	struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
-	/* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FLASH_ATMEL
-	{ 0, 0x1f, spi_flash_probe_atmel, },
-#endif
-#ifdef CONFIG_SPI_FLASH_EON
-	{ 0, 0x1c, spi_flash_probe_eon, },
-#endif
-#ifdef CONFIG_SPI_FLASH_GIGADEVICE
-	{ 0, 0xc8, spi_flash_probe_gigadevice, },
-#endif
-#ifdef CONFIG_SPI_FLASH_MACRONIX
-	{ 0, 0xc2, spi_flash_probe_macronix, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SPANSION
-	{ 0, 0x01, spi_flash_probe_spansion, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SST
-	{ 0, 0xbf, spi_flash_probe_sst, },
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
-	{ 0, 0x20, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND
-	{ 0, 0xef, spi_flash_probe_winbond, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON
-	{ 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
-#endif
-	/* Keep it sorted by best detection */
-#ifdef CONFIG_SPI_FLASH_STMICRO
-	{ 0, 0xff, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
-	{ 0, 0xff, spi_fram_probe_ramtron, },
-#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int spi_mode)
-{
-	struct spi_slave *spi;
-	struct spi_flash *flash = NULL;
-	int ret, i, shift;
-	u8 idcode[IDCODE_LEN], *idp;
-
-	spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
-	if (!spi) {
-		printf("SF: Failed to set up slave\n");
-		return NULL;
-	}
-
-	ret = spi_claim_bus(spi);
-	if (ret) {
-		debug("SF: Failed to claim SPI bus: %d\n", ret);
-		goto err_claim_bus;
-	}
-
-	/* Read the ID codes */
-	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
-	if (ret)
-		goto err_read_id;
-
-#ifdef DEBUG
-	printf("SF: Got idcodes\n");
-	print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
-	/* count the number of continuation bytes */
-	for (shift = 0, idp = idcode;
-	     shift < IDCODE_CONT_LEN && *idp == 0x7f;
-	     ++shift, ++idp)
-		continue;
-
-	/* search the table for matches in shift and id */
-	for (i = 0; i < ARRAY_SIZE(flashes); ++i)
-		if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
-			/* we have a match, call probe */
-			flash = flashes[i].probe(spi, idp);
-			if (flash)
-				break;
-		}
-
-	if (!flash) {
-		printf("SF: Unsupported manufacturer %02x\n", *idp);
-		goto err_manufacturer_probe;
-	}
-
-#ifdef CONFIG_SPI_FLASH_BAR
-	/* Configure the BAR - disover bank cmds and read current bank  */
-	ret = spi_flash_bank_config(flash, *idp);
-	if (ret < 0)
-		goto err_manufacturer_probe;
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
-		debug("SF: FDT decode error\n");
-		goto err_manufacturer_probe;
-	}
-#endif
-	printf("SF: Detected %s with page size ", flash->name);
-	print_size(flash->sector_size, ", total ");
-	print_size(flash->size, "");
-	if (flash->memory_map)
-		printf(", mapped at %p", flash->memory_map);
-	puts("\n");
-#ifndef CONFIG_SPI_FLASH_BAR
-	if (flash->size > SPI_FLASH_16MB_BOUN) {
-		puts("SF: Warning - Only lower 16MiB accessible,");
-		puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
-	}
-#endif
-
-	spi_release_bus(spi);
-
-	return flash;
-
-err_manufacturer_probe:
-err_read_id:
-	spi_release_bus(spi);
-err_claim_bus:
-	spi_free_slave(spi);
-	return NULL;
-}
-
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
-			 const char *name)
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
 {
-	struct spi_flash *flash;
-	void *ptr;
-
-	ptr = malloc(size);
-	if (!ptr) {
-		debug("SF: Failed to allocate memory\n");
-		return NULL;
-	}
-	memset(ptr, '\0', size);
-	flash = (struct spi_flash *)(ptr + offset);
-
-	/* Set up some basic fields - caller will sort out sizes */
-	flash->spi = spi;
-	flash->name = name;
-	flash->poll_cmd = CMD_READ_STATUS;
-
-	flash->read = spi_flash_cmd_read_fast;
-	flash->write = spi_flash_cmd_write_multi;
-	flash->erase = spi_flash_cmd_erase;
-
-	return flash;
+	return spi_flash_cmd_read(spi, &cmd, 1, response, len);
 }
 
-void spi_flash_free(struct spi_flash *flash)
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+		const void *data, size_t data_len)
 {
-	spi_free_slave(flash->spi);
-	free(flash);
+	return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
 }
diff --git a/drivers/mtd/spi/spi_flash_ops.c b/drivers/mtd/spi/spi_flash_ops.c
new file mode 100644
index 0000000..1538bf3
--- /dev/null
+++ b/drivers/mtd/spi/spi_flash_ops.c
@@ -0,0 +1,314 @@
+/*
+ * SPI flash operations
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <watchdog.h>
+
+#include "spi_flash_internal.h"
+
+static void spi_flash_addr(u32 addr, u8 *cmd)
+{
+	/* cmd[0] is actual command */
+	cmd[1] = addr >> 16;
+	cmd[2] = addr >> 8;
+	cmd[3] = addr >> 0;
+}
+
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+	struct spi_slave *spi = flash->spi;
+	unsigned long timebase;
+	int ret;
+	u8 status;
+	u8 check_status = 0x0;
+	u8 poll_bit = STATUS_WIP;
+	u8 cmd = flash->poll_cmd;
+
+	if (cmd == CMD_FLAG_STATUS) {
+		poll_bit = STATUS_PEC;
+		check_status = poll_bit;
+	}
+
+	ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+	if (ret) {
+		debug("SF: fail to read %s status register\n",
+		      cmd == CMD_READ_STATUS ? "read" : "flag");
+		return ret;
+	}
+
+	timebase = get_timer(0);
+	do {
+		WATCHDOG_RESET();
+
+		ret = spi_xfer(spi, 8, NULL, &status, 0);
+		if (ret)
+			return -1;
+
+		if ((status & poll_bit) == check_status)
+			break;
+
+	} while (get_timer(timebase) < timeout);
+
+	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+	if ((status & poll_bit) == check_status)
+		return 0;
+
+	/* Timed out */
+	debug("SF: time out!\n");
+	return -1;
+}
+
+int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+		size_t cmd_len, const void *buf, size_t buf_len)
+{
+	struct spi_slave *spi = flash->spi;
+	unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
+	int ret;
+
+	if (buf == NULL)
+		timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_write_enable(flash);
+	if (ret < 0) {
+		debug("SF: enabling write failed\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
+	if (ret < 0) {
+		debug("SF: write cmd failed\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_wait_ready(flash, timeout);
+	if (ret < 0) {
+		debug("SF: write %s timed out\n",
+		      timeout == SPI_FLASH_PROG_TIMEOUT ?
+			"program" : "page erase");
+		return ret;
+	}
+
+	spi_release_bus(spi);
+
+	return ret;
+}
+
+int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+	u32 erase_size;
+	u8 cmd[4];
+	int ret = -1;
+
+	erase_size = flash->sector_size;
+	if (offset % erase_size || len % erase_size) {
+		debug("SF: Erase offset/length not multiple of erase size\n");
+		return -1;
+	}
+
+	if (erase_size == 4096)
+		cmd[0] = CMD_ERASE_4K;
+	else
+		cmd[0] = CMD_ERASE_64K;
+
+	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		spi_flash_addr(offset, cmd);
+
+		debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+		      cmd[2], cmd[3], offset);
+
+		ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
+		if (ret < 0) {
+			debug("SF: erase failed\n");
+			break;
+		}
+
+		offset += erase_size;
+		len -= erase_size;
+	}
+
+	return ret;
+}
+
+int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
+		size_t len, const void *buf)
+{
+	unsigned long byte_addr, page_size;
+	size_t chunk_len, actual;
+	u8 cmd[4];
+	int ret = -1;
+
+	page_size = flash->page_size;
+
+	cmd[0] = CMD_PAGE_PROGRAM;
+	for (actual = 0; actual < len; actual += chunk_len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		u8 bank_sel;
+
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		byte_addr = offset % page_size;
+		chunk_len = min(len - actual, page_size - byte_addr);
+
+		if (flash->spi->max_write_size)
+			chunk_len = min(chunk_len, flash->spi->max_write_size);
+
+		spi_flash_addr(offset, cmd);
+
+		debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
+		      buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+		ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
+					buf + actual, chunk_len);
+		if (ret < 0) {
+			debug("SF: write failed\n");
+			break;
+		}
+
+		offset += chunk_len;
+	}
+
+	return ret;
+}
+
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+		size_t cmd_len, void *data, size_t data_len)
+{
+	struct spi_slave *spi = flash->spi;
+	int ret;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+	if (ret < 0) {
+		debug("SF: read cmd failed\n");
+		return ret;
+	}
+
+	spi_release_bus(spi);
+
+	return ret;
+}
+
+int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
+		size_t len, void *data)
+{
+	u8 cmd[5], bank_sel = 0;
+	u32 remain_len, read_len;
+	int ret = -1;
+
+	/* Handle memory-mapped SPI */
+	if (flash->memory_map) {
+		memcpy(data, flash->memory_map + offset, len);
+		return 0;
+	}
+
+	cmd[0] = CMD_READ_ARRAY_FAST;
+	cmd[4] = 0x00;
+
+	while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+		bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+		ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+		if (ret) {
+			debug("SF: fail to set bank%d\n", bank_sel);
+			return ret;
+		}
+#endif
+		remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
+		if (len < remain_len)
+			read_len = len;
+		else
+			read_len = remain_len;
+
+		spi_flash_addr(offset, cmd);
+
+		ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
+							data, read_len);
+		if (ret < 0) {
+			debug("SF: read failed\n");
+			break;
+		}
+
+		offset += read_len;
+		len -= read_len;
+		data += read_len;
+	}
+
+	return ret;
+}
+
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+{
+	u8 cmd;
+	int ret;
+
+	cmd = CMD_WRITE_STATUS;
+	ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
+	if (ret < 0) {
+		debug("SF: fail to write status register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SPI_FLASH_BAR
+int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
+{
+	u8 cmd;
+	int ret;
+
+	if (flash->bank_curr == bank_sel) {
+		debug("SF: not require to enable bank%d\n", bank_sel);
+		return 0;
+	}
+
+	cmd = flash->bank_write_cmd;
+	ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
+	if (ret < 0) {
+		debug("SF: fail to write bank register\n");
+		return ret;
+	}
+	flash->bank_curr = bank_sel;
+
+	return 0;
+}
+#endif
diff --git a/drivers/mtd/spi/spi_flash_probe.c b/drivers/mtd/spi/spi_flash_probe.c
new file mode 100644
index 0000000..fedc81e
--- /dev/null
+++ b/drivers/mtd/spi/spi_flash_probe.c
@@ -0,0 +1,274 @@
+/*
+ * SPI flash probing
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <spi.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPI_FLASH_BAR
+int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
+{
+	u8 cmd;
+	u8 curr_bank = 0;
+
+	/* discover bank cmds */
+	switch (idcode0) {
+	case SPI_FLASH_SPANSION_IDCODE0:
+		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
+		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
+		break;
+	case SPI_FLASH_STMICRO_IDCODE0:
+	case SPI_FLASH_WINBOND_IDCODE0:
+		flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
+		flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
+		break;
+	default:
+		printf("SF: Unsupported bank commands %02x\n", idcode0);
+		return -1;
+	}
+
+	/* read the bank reg - on which bank the flash is in currently */
+	cmd = flash->bank_read_cmd;
+	if (flash->size > SPI_FLASH_16MB_BOUN) {
+		if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
+			debug("SF: fail to read bank addr register\n");
+			return -1;
+		}
+		flash->bank_curr = curr_bank;
+	} else {
+		flash->bank_curr = curr_bank;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_OF_CONTROL
+int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
+{
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int node;
+
+	/* If there is no node, do nothing */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+	if (node < 0)
+		return 0;
+
+	addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+	if (addr == FDT_ADDR_T_NONE) {
+		debug("%s: Cannot decode address\n", __func__);
+		return 0;
+	}
+
+	if (flash->size != size) {
+		debug("%s: Memory map must cover entire device\n", __func__);
+		return -1;
+	}
+	flash->memory_map = (void *)addr;
+
+	return 0;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+/*
+ * The following table holds all device probe functions
+ *
+ * shift:  number of continuation bytes before the ID
+ * idcode: the expected IDCODE or 0xff for non JEDEC devices
+ * probe:  the function to call
+ *
+ * Non JEDEC devices should be ordered in the table such that
+ * the probe functions with best detection algorithms come first.
+ *
+ * Several matching entries are permitted, they will be tried
+ * in sequence until a probe function returns non NULL.
+ *
+ * IDCODE_CONT_LEN may be redefined if a device needs to declare a
+ * larger "shift" value.  IDCODE_PART_LEN generally shouldn't be
+ * changed.  This is the max number of bytes probe functions may
+ * examine when looking up part-specific identification info.
+ *
+ * Probe functions will be given the idcode buffer starting at their
+ * manu id byte (the "idcode" in the table below).  In other words,
+ * all of the continuation bytes will be skipped (the "shift" below).
+ */
+#define IDCODE_CONT_LEN 0
+#define IDCODE_PART_LEN 5
+static const struct {
+	const u8 shift;
+	const u8 idcode;
+	struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
+} flashes[] = {
+	/* Keep it sorted by define name */
+#ifdef CONFIG_SPI_FLASH_ATMEL
+	{ 0, 0x1f, spi_flash_probe_atmel, },
+#endif
+#ifdef CONFIG_SPI_FLASH_EON
+	{ 0, 0x1c, spi_flash_probe_eon, },
+#endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+	{ 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+	{ 0, 0xc2, spi_flash_probe_macronix, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SPANSION
+	{ 0, 0x01, spi_flash_probe_spansion, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SST
+	{ 0, 0xbf, spi_flash_probe_sst, },
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+	{ 0, 0x20, spi_flash_probe_stmicro, },
+#endif
+#ifdef CONFIG_SPI_FLASH_WINBOND
+	{ 0, 0xef, spi_flash_probe_winbond, },
+#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON
+	{ 6, 0xc2, spi_fram_probe_ramtron, },
+# undef IDCODE_CONT_LEN
+# define IDCODE_CONT_LEN 6
+#endif
+	/* Keep it sorted by best detection */
+#ifdef CONFIG_SPI_FLASH_STMICRO
+	{ 0, 0xff, spi_flash_probe_stmicro, },
+#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+	{ 0, 0xff, spi_fram_probe_ramtron, },
+#endif
+};
+#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int spi_mode)
+{
+	struct spi_slave *spi;
+	struct spi_flash *flash = NULL;
+	int ret, i, shift;
+	u8 idcode[IDCODE_LEN], *idp;
+
+	spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+	if (!spi) {
+		printf("SF: Failed to set up slave\n");
+		return NULL;
+	}
+
+	ret = spi_claim_bus(spi);
+	if (ret) {
+		debug("SF: Failed to claim SPI bus: %d\n", ret);
+		goto err_claim_bus;
+	}
+
+	/* Read the ID codes */
+	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+	if (ret)
+		goto err_read_id;
+
+#ifdef DEBUG
+	printf("SF: Got idcodes\n");
+	print_buffer(0, idcode, 1, sizeof(idcode), 0);
+#endif
+
+	/* count the number of continuation bytes */
+	for (shift = 0, idp = idcode;
+	     shift < IDCODE_CONT_LEN && *idp == 0x7f;
+	     ++shift, ++idp)
+		continue;
+
+	/* search the table for matches in shift and id */
+	for (i = 0; i < ARRAY_SIZE(flashes); ++i)
+		if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
+			/* we have a match, call probe */
+			flash = flashes[i].probe(spi, idp);
+			if (flash)
+				break;
+		}
+
+	if (!flash) {
+		printf("SF: Unsupported manufacturer %02x\n", *idp);
+		goto err_manufacturer_probe;
+	}
+
+#ifdef CONFIG_SPI_FLASH_BAR
+	/* Configure the BAR - disover bank cmds and read current bank  */
+	ret = spi_flash_bank_config(flash, *idp);
+	if (ret < 0)
+		goto err_manufacturer_probe;
+#endif
+
+#ifdef CONFIG_OF_CONTROL
+	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
+		debug("SF: FDT decode error\n");
+		goto err_manufacturer_probe;
+	}
+#endif
+	printf("SF: Detected %s with page size ", flash->name);
+	print_size(flash->sector_size, ", total ");
+	print_size(flash->size, "");
+	if (flash->memory_map)
+		printf(", mapped at %p", flash->memory_map);
+	puts("\n");
+#ifndef CONFIG_SPI_FLASH_BAR
+	if (flash->size > SPI_FLASH_16MB_BOUN) {
+		puts("SF: Warning - Only lower 16MiB accessible,");
+		puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+	}
+#endif
+
+	spi_release_bus(spi);
+
+	return flash;
+
+err_manufacturer_probe:
+err_read_id:
+	spi_release_bus(spi);
+err_claim_bus:
+	spi_free_slave(spi);
+	return NULL;
+}
+
+void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
+			 const char *name)
+{
+	struct spi_flash *flash;
+	void *ptr;
+
+	ptr = malloc(size);
+	if (!ptr) {
+		debug("SF: Failed to allocate memory\n");
+		return NULL;
+	}
+	memset(ptr, '\0', size);
+	flash = (struct spi_flash *)(ptr + offset);
+
+	/* Set up some basic fields - caller will sort out sizes */
+	flash->spi = spi;
+	flash->name = name;
+	flash->poll_cmd = CMD_READ_STATUS;
+
+	flash->read = spi_flash_cmd_read_fast;
+	flash->write = spi_flash_cmd_write_multi;
+	flash->erase = spi_flash_cmd_erase;
+
+	return flash;
+}
+
+void spi_flash_free(struct spi_flash *flash)
+{
+	spi_free_slave(flash->spi);
+	free(flash);
+}
