diff --git a/README b/README
index a5c3e8d..8e93eab 100644
--- a/README
+++ b/README
@@ -1974,6 +1974,19 @@ CBFS (Coreboot Filesystem) support
 		  - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
 		  - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
 
+		- drivers/i2c/omap24xx_i2c.c
+		  - activate this driver with CONFIG_SYS_I2C_OMAP24XX
+		  - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0
+		  - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1
+		  - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2
+		  - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3
+		  - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
+
 		additional defines:
 
 		CONFIG_SYS_NUM_I2C_BUSES
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 7580594..fc70595 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -786,7 +786,8 @@ void gpi2c_init(void)
 	static int gpi2c = 1;
 
 	if (gpi2c) {
-		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE);
 		gpi2c = 0;
 	}
 }
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 7d1f8d9..2922816 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -98,7 +98,7 @@ void spl_board_init(void)
 	gpmc_init();
 #endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 }
 #endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 3acbc9c..7e48352 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -692,7 +692,7 @@ void per_clocks_enable(void)
 	sr32(&prcm_base->iclken_per, 17, 1, 1);
 #endif
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 	/* Turn on all 3 I2C clocks */
 	sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
 	sr32(&prcm_base->iclken1_core, 15, 3, 0x7);	/* I2C1,2,3 = on */
diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h
index 8bfa53f..8642c8f 100644
--- a/arch/arm/include/asm/arch-am33xx/i2c.h
+++ b/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -4,8 +4,8 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-#ifndef _I2C_H_
-#define _I2C_H_
+#ifndef _I2C_AM33XX_H_
+#define _I2C_AM33XX_H_
 
 #define  I2C_BASE1		0x44E0B000
 #define  I2C_BASE2		0x4802A000
@@ -62,4 +62,4 @@ struct i2c {
 #define I2C_IP_CLK			48000000
 #define I2C_INTERNAL_SAMPLING_CLK	12000000
 
-#endif /* _I2C_H_ */
+#endif /* _I2C_AM33XX_H_ */
diff --git a/board/compulab/cm_t35/Makefile b/board/compulab/cm_t35/Makefile
index 6d07947..9014d2a 100644
--- a/board/compulab/cm_t35/Makefile
+++ b/board/compulab/cm_t35/Makefile
@@ -11,7 +11,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o
 COBJS-$(CONFIG_LCD) += display.o
 
 COBJS	:= cm_t35.o leds.o $(COBJS-y)
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 3caa5be..1dd3647 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -470,7 +470,7 @@ static void setup_net_chip_gmpc(void)
 		&ctrl_base->gpmc_nadv_ale);
 }
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 /*
  * Routine: reset_net_chip
  * Description: reset the Ethernet controller via TPS65930 GPIO
diff --git a/board/compulab/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h
index 02ffbb1..a07559d 100644
--- a/board/compulab/cm_t35/eeprom.h
+++ b/board/compulab/cm_t35/eeprom.h
@@ -10,7 +10,7 @@
 #ifndef _EEPROM_
 #define _EEPROM_
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 int cm_t3x_eeprom_read_mac_addr(uchar *buf);
 u32 cm_t3x_eeprom_get_board_rev(void);
 #else
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index 1cabc80..33709bd 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -98,8 +98,8 @@ static void am3517_evm_musb_init(void)
  */
 int misc_init_r(void)
 {
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 	dieid_num_r();
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a6e2e93..93ed2f7 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -92,7 +92,7 @@ int get_board_revision(void)
 {
 	int revision;
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 	unsigned char data;
 
 	/* board revisions <= R2410 connect 4030 irq_1 to gpio112             */
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 275fe82..b99983d 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -91,7 +91,7 @@ void set_mux_conf_regs(void)
 {
 	/* Initalize the board header */
 	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
 	enable_board_pin_mux();
 }
@@ -108,7 +108,7 @@ void sdram_init(void)
  */
 int board_init(void)
 {
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
 	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
 
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b2bec34..daa6907 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -249,7 +249,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
 	struct am335x_baseboard_id header;
 
 	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 	if (read_eeprom(&header) < 0)
 		puts("Could not get board ID.\n");
 
diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c
index 5eb97ff..a649697 100644
--- a/board/ti/am3517crane/am3517crane.c
+++ b/board/ti/am3517crane/am3517crane.c
@@ -43,8 +43,8 @@ int board_init(void)
  */
 int misc_init_r(void)
 {
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 	dieid_num_r();
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index c71c218..81dd081 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -146,8 +146,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 int misc_init_r(void)
 {
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 #if defined(CONFIG_CMD_NET)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 37ccbd1..f32daea 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -17,8 +17,6 @@ COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
 COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
@@ -30,6 +28,8 @@ COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
 COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
 COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
 COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
 COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ef38d71..3d38c03 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -35,6 +35,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
@@ -48,22 +49,14 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Absolutely safe for status update at 100 kHz I2C: */
 #define I2C_WAIT	200
 
-static int wait_for_bb(void);
-static u16 wait_for_event(void);
-static void flush_fifo(void);
+static int wait_for_bb(struct i2c_adapter *adap);
+static struct i2c *omap24_get_base(struct i2c_adapter *adap);
+static u16 wait_for_event(struct i2c_adapter *adap);
+static void flush_fifo(struct i2c_adapter *adap);
 
-/*
- * For SPL boot some boards need i2c before SDRAM is initialised so force
- * variables to live in SRAM
- */
-static struct i2c __attribute__((section (".data"))) *i2c_base =
-					(struct i2c *)I2C_DEFAULT_BASE;
-static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
-					{ [0 ... (I2C_BUS_MAX-1)] = 0 };
-static unsigned int __attribute__((section (".data"))) current_bus = 0;
-
-void i2c_init(int speed, int slaveadd)
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int psc, fsscll, fssclh;
 	int hsscll = 0, hssclh = 0;
 	u32 scll, sclh;
@@ -163,16 +156,15 @@ void i2c_init(int speed, int slaveadd)
 	       I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
 #endif
 	udelay(1000);
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
-
-	if (gd->flags & GD_FLG_RELOC)
-		bus_initialized[current_bus] = 1;
 }
 
-static void flush_fifo(void)
-{	u16 stat;
+static void flush_fifo(struct i2c_adapter *adap)
+{
+	struct i2c *i2c_base = omap24_get_base(adap);
+	u16 stat;
 
 	/* note: if you try and read data when its not there or ready
 	 * you get a bus error
@@ -192,8 +184,9 @@ static void flush_fifo(void)
  * i2c_probe: Use write access. Allows to identify addresses that are
  *            write-only (like the config register of dual-port EEPROMs)
  */
-int i2c_probe(uchar chip)
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	u16 status;
 	int res = 1; /* default = fail */
 
@@ -201,7 +194,7 @@ int i2c_probe(uchar chip)
 		return res;
 
 	/* Wait until bus is free */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return res;
 
 	/* No data transfer, slave addr only */
@@ -212,7 +205,7 @@ int i2c_probe(uchar chip)
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
 	       I2C_CON_STP, &i2c_base->con);
 
-	status = wait_for_event();
+	status = wait_for_event(adap);
 
 	if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
 		/*
@@ -223,7 +216,7 @@ int i2c_probe(uchar chip)
 		 */
 		if (status == I2C_STAT_XRDY)
 			printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 
 		goto pr_exit;
 	}
@@ -239,7 +232,7 @@ int i2c_probe(uchar chip)
 		       I2C_CON_STP, &i2c_base->con);		/* STP */
 	}
 pr_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return res;
@@ -258,8 +251,10 @@ pr_exit:
  *           or that do not need a register address at all (such as some clock
  *           distributors).
  */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			   int alen, uchar *buffer, int len)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int i2c_error = 0;
 	u16 status;
 
@@ -287,7 +282,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 	/* Wait until bus not busy */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return 1;
 
 	/* Zero, one or two bytes reg address (offset) */
@@ -308,12 +303,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 #endif
 		/* Send register offset */
 		while (1) {
-			status = wait_for_event();
+			status = wait_for_event(adap);
 			/* Try to identify bus that is not padconf'd for I2C */
 			if (status == I2C_STAT_XRDY) {
 				i2c_error = 2;
 				printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
-				       current_bus, status);
+				       adap->hwadapnr, status);
 				goto rd_exit;
 			}
 			if (status == 0 || status & I2C_STAT_NACK) {
@@ -348,7 +343,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	/* Receive data */
 	while (1) {
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		/*
 		 * Try to identify bus that is not padconf'd for I2C. This
 		 * state could be left over from previous transactions if
@@ -357,7 +352,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		if (status == I2C_STAT_XRDY) {
 			i2c_error = 2;
 			printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 			goto rd_exit;
 		}
 		if (status == 0 || status & I2C_STAT_NACK) {
@@ -375,15 +370,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 rd_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return i2c_error;
 }
 
 /* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			    int alen, uchar *buffer, int len)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int i;
 	u16 status;
 	int i2c_error = 0;
@@ -415,7 +412,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 	/* Wait until bus not busy */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return 1;
 
 	/* Start address phase - will write regoffset + len bytes data */
@@ -428,12 +425,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	while (alen) {
 		/* Must write reg offset (one or two bytes) */
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		/* Try to identify bus that is not padconf'd for I2C */
 		if (status == I2C_STAT_XRDY) {
 			i2c_error = 2;
 			printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 			goto wr_exit;
 		}
 		if (status == 0 || status & I2C_STAT_NACK) {
@@ -455,7 +452,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 	/* Address phase is over, now write data */
 	for (i = 0; i < len; i++) {
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		if (status == 0 || status & I2C_STAT_NACK) {
 			i2c_error = 1;
 			printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
@@ -474,7 +471,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 wr_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return i2c_error;
@@ -484,8 +481,9 @@ wr_exit:
  * Wait for the bus to be free by checking the Bus Busy (BB)
  * bit to become clear
  */
-static int wait_for_bb(void)
+static int wait_for_bb(struct i2c_adapter *adap)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int timeout = I2C_TIMEOUT;
 	u16 stat;
 
@@ -514,8 +512,9 @@ static int wait_for_bb(void)
  * Wait for the I2C controller to complete current action
  * and update status
  */
-static u16 wait_for_event(void)
+static u16 wait_for_event(struct i2c_adapter *adap)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	u16 status;
 	int timeout = I2C_TIMEOUT;
 
@@ -540,7 +539,7 @@ static u16 wait_for_event(void)
 		 * not been configured for I2C, and/or pull-ups are missing.
 		 */
 		printf("Check if pads/pull-ups of bus %d are properly configured\n",
-		       current_bus);
+		       adap->hwadapnr);
 		writew(0xFFFF, &i2c_base->stat);
 		status = 0;
 	}
@@ -548,48 +547,93 @@ static u16 wait_for_event(void)
 	return status;
 }
 
-int i2c_set_bus_num(unsigned int bus)
+static struct i2c *omap24_get_base(struct i2c_adapter *adap)
 {
-	if (bus >= I2C_BUS_MAX) {
-		printf("Bad bus: %x\n", bus);
-		return -1;
-	}
-
-	switch (bus) {
-	default:
-		bus = 0;	/* Fall through */
+	switch (adap->hwadapnr) {
 	case 0:
-		i2c_base = (struct i2c *)I2C_BASE1;
+		return (struct i2c *)I2C_BASE1;
 		break;
 	case 1:
-		i2c_base = (struct i2c *)I2C_BASE2;
+		return (struct i2c *)I2C_BASE2;
 		break;
 #if (I2C_BUS_MAX > 2)
 	case 2:
-		i2c_base = (struct i2c *)I2C_BASE3;
+		return (struct i2c *)I2C_BASE3;
 		break;
 #if (I2C_BUS_MAX > 3)
 	case 3:
-		i2c_base = (struct i2c *)I2C_BASE4;
+		return (struct i2c *)I2C_BASE4;
 		break;
 #if (I2C_BUS_MAX > 4)
 	case 4:
-		i2c_base = (struct i2c *)I2C_BASE5;
+		return (struct i2c *)I2C_BASE5;
 		break;
 #endif
 #endif
 #endif
+	default:
+		printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+		break;
 	}
+	return NULL;
+}
 
-	current_bus = bus;
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
+#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-	if (!bus_initialized[current_bus])
-		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE,
+			 0)
+U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED1,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE1,
+			 1)
+#if (I2C_BUS_MAX > 2)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2)
+#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-	return 0;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED2,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE2,
+			 2)
+#if (I2C_BUS_MAX > 3)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3)
+#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-int i2c_get_bus_num(void)
-{
-	return (int) current_bus;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED3,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE3,
+			 3)
+#if (I2C_BUS_MAX > 4)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4)
+#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
+
+U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED4,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE4,
+			 4)
+#endif
+#endif
+#endif
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index e32066d..566b118 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -300,11 +300,10 @@
 /* I2C Configuration */
 #define CONFIG_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 9bf283a..436dacc 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -141,10 +141,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 5c61697..e9cb007 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -135,10 +135,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 39a216e..5c57ae7 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -139,10 +139,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_I2C_MULTI_BUS
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 513121a..172b13e 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -89,10 +89,10 @@
 #define CONFIG_DOS_PARTITION		1
 
 /* I2C */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
 #define CONFIG_TWL4030_POWER		1
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index bf91625..3e87cc3 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -122,10 +122,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index c17267e..2230f86 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -121,10 +121,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index c2b1631..43ef3c3 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -136,10 +136,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* RTC */
 #define CONFIG_RTC_DS1337
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 36c6800..5cf852c 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -156,10 +156,10 @@
 #undef CONFIG_CMD_SETGETDCR		/* DCR support on 4xx */
 
 #define CONFIG_OMAP3_SPI
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4487451..8ec0292 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -160,11 +160,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
 /*
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 3b3e25a..46fff9f 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -87,11 +87,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * PISMO support
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 3dd6d32..4eb333b 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -117,12 +117,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 5526b43..67e7aad 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -127,11 +127,10 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_FPGA
 
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 3e018c0..7a8048f 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -97,11 +97,10 @@
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 3e8bd67..12cba69 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -110,10 +110,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 836a3d8..4949d66 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -113,10 +113,10 @@
 /*
  * I2C for power management setup
  */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
 
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 3687045..372ee6b 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -117,10 +117,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index c57df8e..7de8c97 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -137,10 +137,10 @@
 #undef CONFIG_CMD_NFS			/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 719cb83..e3c0c10 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -72,11 +72,10 @@
 #define CONFIG_ARCH_CPU_INIT
 
 /* I2C  */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL6030 */
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 7dd56cf..fd790ed 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -66,11 +66,10 @@
 #define CONFIG_ARCH_CPU_INIT
 
 /* I2C  */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* MMC */
 #define CONFIG_GENERIC_MMC
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 9b16c47..9704a43 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -176,11 +176,10 @@
 /* I2C Configuration */
 #define CONFIG_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index c297827..b76af0e 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -116,14 +116,13 @@
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
 
 /*
  * Board NAND Info.
@@ -370,7 +369,7 @@ struct tam3517_module_info {
 
 #define TAM3517_READ_EEPROM(info, ret) \
 do {								\
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);	\
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
 	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,		\
 		(void *)info, sizeof(*info)))			\
 		ret = 1;					\
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 4e2cb65..da2581d 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -79,10 +79,10 @@
 #define CONFIG_DOS_PARTITION
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
 #define CONFIG_TWL4030_POWER
