diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
new file mode 100644
index 0000000..4f343ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -0,0 +1,518 @@
+/*
+ * Keymile KMETER1 Device Tree Source
+ *
+ * 2008 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/	00000000 1000000;
+*/
+
+/dts-v1/;
+
+/ {
+	model = "KMETER1";
+	compatible = "keymile,KMETER1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet_piggy2;
+		ethernet1 = &enet_estar1;
+		ethernet2 = &enet_estar2;
+		ethernet3 = &enet_eth1;
+		ethernet4 = &enet_eth2;
+		ethernet5 = &enet_eth3;
+		ethernet6 = &enet_eth4;
+		serial0 = &serial0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <66000000>;
+			bus-frequency = <264000000>;
+			clock-frequency = <528000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8360@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <264000000>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		ipic: pic@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			reg = <0x1400 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			pio_ucc1: ucc_pin@00 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0   3  1  0  1  0	/* TxD0   */
+					0   4  1  0  1  0	/* TxD1   */
+					0   5  1  0  1  0	/* TxD2   */
+					0   6  1  0  1  0	/* TxD3   */
+					0   9  2  0  1  0	/* RxD0   */
+					0  10  2  0  1  0	/* RxD1   */
+					0  11  2  0  1  0	/* RxD2   */
+					0  12  2  0  1  0	/* RxD3   */
+					0   7  1  0  1  0	/* TX_EN  */
+					0   8  1  0  1  0	/* TX_ER  */
+					0  15  2  0  1  0	/* RX_DV  */
+					0  16  2  0  1  0	/* RX_ER  */
+					0   0  2  0  1  0	/* RX_CLK */
+					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
+					2   8  2  0  1  0	/* GTX125  - CLK9  */
+				>;
+			};
+
+			pio_ucc2: ucc_pin@01 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0  17  1  0  1  0	/* TxD0   */
+					0  18  1  0  1  0	/* TxD1   */
+					0  19  1  0  1  0	/* TxD2   */
+					0  20  1  0  1  0	/* TxD3   */
+					0  23  2  0  1  0	/* RxD0   */
+					0  24  2  0  1  0	/* RxD1   */
+					0  25  2  0  1  0	/* RxD2   */
+					0  26  2  0  1  0	/* RxD3   */
+					0  21  1  0  1  0	/* TX_EN  */
+					0  22  1  0  1  0	/* TX_ER  */
+					0  29  2  0  1  0	/* RX_DV  */
+					0  30  2  0  1  0	/* RX_ER  */
+					0  31  2  0  1  0	/* RX_CLK */
+					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
+					2  3   2  0  1  0	/* GTX125  - CLK4  */
+				>;
+			};
+
+			pio_ucc4: ucc_pin@03 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
+					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
+					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
+					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
+					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
+					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
+					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
+
+					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
+				>;
+			};
+
+			pio_ucc5: ucc_pin@04 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
+					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
+					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
+					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
+					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
+					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
+					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
+				>;
+			};
+
+			pio_ucc6: ucc_pin@05 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
+					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
+					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
+					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
+					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
+					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
+					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
+				>;
+			};
+
+			pio_ucc7: ucc_pin@06 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
+					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
+					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
+					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
+					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
+					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
+					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
+				>;
+			};
+
+			pio_ucc8: ucc_pin@07 {
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
+					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
+					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
+					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
+					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
+					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
+					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
+
+					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
+				>;
+			};
+
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <396000000>;
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x0000c000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0xc000>;
+			};
+		};
+
+		/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+		enet_estar1: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk9";
+			phy-handle = <&phy_estar1>;
+			phy-connection-type = "rgmii-id";
+			pio-handle = <&pio_ucc1>;
+		};
+
+		/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+		enet_estar2: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk4";
+			phy-handle = <&phy_estar2>;
+			phy-connection-type = "rgmii-id";
+			pio-handle = <&pio_ucc2>;
+		};
+
+		/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+		enet_piggy2: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <4>;
+			reg = <0x3200 0x200>;
+			interrupts = <35>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			phy-handle = <&phy_piggy2>;
+			phy-connection-type = "rmii";
+			pio-handle = <&pio_ucc4>;
+		};
+
+		/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+		enet_eth1: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			phy-handle = <&phy_eth1>;
+			phy-connection-type = "rmii";
+			pio-handle = <&pio_ucc5>;
+		};
+
+		/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+		enet_eth2: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <6>;
+			reg = <0x3400 0x200>;
+			interrupts = <41>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			phy-handle = <&phy_eth2>;
+			phy-connection-type = "rmii";
+			pio-handle = <&pio_ucc6>;
+		};
+
+		/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+		enet_eth3: ucc@2600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <7>;
+			reg = <0x2600 0x200>;
+			interrupts = <42>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			phy-handle = <&phy_eth3>;
+			phy-connection-type = "rmii";
+			pio-handle = <&pio_ucc7>;
+		};
+
+		/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+		enet_eth4: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <8>;
+			reg = <0x3600 0x200>;
+			interrupts = <43>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			phy-handle = <&phy_eth4>;
+			phy-connection-type = "rmii";
+			pio-handle = <&pio_ucc8>;
+		};
+
+		mdio@3320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3320 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+			phy_piggy2: ethernet-phy@00 {
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+
+			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+			phy_eth1: ethernet-phy@08 {
+				reg = <0x08>;
+				device_type = "ethernet-phy";
+			};
+
+			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+			phy_eth2: ethernet-phy@09 {
+				reg = <0x09>;
+				device_type = "ethernet-phy";
+			};
+
+			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+			phy_eth3: ethernet-phy@0a {
+				reg = <0x0a>;
+				device_type = "ethernet-phy";
+			};
+
+			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+			phy_eth4: ethernet-phy@0b {
+				reg = <0x0b>;
+				device_type = "ethernet-phy";
+			};
+
+			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+			phy_estar1: ethernet-phy@10 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x10>;
+				device_type = "ethernet-phy";
+			};
+
+			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+			phy_estar2: ethernet-phy@11 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x11>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 8 33 8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xf0000000 0x04000000>;
+
+		flash@f0000000,0 {
+			compatible = "cfi-flash";
+			/*
+			 * The Intel P30 chip has 2 non-identical chips on
+			 * one die, so we need to define 2 seperate regions
+			 * that are scanned by physmap_of independantly.
+			 */
+			reg = <0 0x00000000 0x02000000
+			       0 0x02000000 0x02000000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x40000>;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x40000 0x40000>;
+			};
+			partition@80000 {
+				label = "dtb";
+				reg = <0x80000 0x20000>;
+			};
+			partition@a0000 {
+				label = "kernel";
+				reg = <0xa0000 0x300000>;
+			};
+			partition@3a0000 {
+				label = "ramdisk";
+				reg = <0x3a0000 0x800000>;
+			};
+			partition@ba0000 {
+				label = "user";
+				reg = <0xba0000 0x3460000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
new file mode 100644
index 0000000..bf0853f
--- /dev/null
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -0,0 +1,908 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28
+# Fri Apr  3 10:34:33 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+CONFIG_KMETER1=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+CONFIG_QUICC_ENGINE=y
+# CONFIG_QE_GPIO is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_PHRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+CONFIG_MTD_UBI_DEBUG=y
+# CONFIG_MTD_UBI_DEBUG_MSG is not set
+# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
+# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
+# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
+# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
+
+#
+# Additional UBI debugging messages
+#
+# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
+# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WAN=y
+CONFIG_HDLC=y
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+
+#
+# X.25/LAPB support is disabled
+#
+CONFIG_HDLC_KM=y
+CONFIG_FS_UCC_HDLC=y
+# CONFIG_DLCI is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_BOOTCOUNT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MCU_MPC8349EMITX is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 437d29a..083ebee 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -96,6 +96,13 @@ config ASP834x
 	  This enables support for the Analogue & Micro ASP 83xx
 	  board.

+config KMETER1
+	bool "Keymile KMETER1"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This enables support for the Keymile KMETER1 board.
+

 endif

diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 051777c..e139c36 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
 obj-$(CONFIG_ASP834x)		+= asp834x.o
+obj-$(CONFIG_KMETER1)		+= kmeter1.o
diff --git a/arch/powerpc/platforms/83xx/kmeter1.c b/arch/powerpc/platforms/83xx/kmeter1.c
new file mode 100644
index 0000000..99cf5c6
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/kmeter1.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Description:
+ * Keymile KMETER1 board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init kmeter1_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("kmeter1_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_reset();
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np != NULL) {
+		par_io_init(np);
+		of_node_put(np);
+
+		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+			par_io_of_config(np);
+	}
+
+	np = of_find_compatible_node(NULL, "network", "ucc_geth");
+	if (np != NULL) {
+		uint svid;
+
+		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+		svid = mfspr(SPRN_SVR);
+		if (svid == 0x80480021) {
+			void __iomem *immap;
+
+			immap = ioremap(get_immrbase() + 0x14a8, 8);
+
+			/*
+			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+			 */
+			setbits32(immap, 0x0c003000);
+
+			/*
+			 * IMMR + 0x14AC[20:27] = 10101010
+			 * (data delay for both UCC's)
+			 */
+			clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+			iounmap(immap);
+		}
+		of_node_put(np);
+	}
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+static struct of_device_id kmeter_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{},
+};
+
+static int __init kmeter_declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, kmeter_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(kmeter1, kmeter_declare_of_platform_devices);
+
+static void __init kmeter1_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init kmeter1_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "keymile,KMETER1");
+}
+
+define_machine(kmeter1) {
+	.name		= "KMETER1",
+	.probe		= kmeter1_probe,
+	.setup_arch	= kmeter1_setup_arch,
+	.init_IRQ	= kmeter1_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
