===================================================================
@@ -88,6 +88,8 @@
#define MVNETA_TX_IN_PRGRS BIT(1)
#define MVNETA_TX_FIFO_EMPTY BIT(8)
#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
+#define MVNETA_SGMII_SERDES_CFG 0x24A0
+#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
#define MVNETA_TYPE_PRIO 0x24bc
#define MVNETA_FORCE_UNI BIT(21)
#define MVNETA_TXQ_CMD_1 0x24e4
@@ -655,6 +657,8 @@ static void mvneta_port_sgmii_config(str
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
val |= MVNETA_GMAC2_PSC_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+
+ mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
}
/* Start the Ethernet port RX and TX activity */
@@ -2735,11 +2739,17 @@ static int mvneta_probe(struct platform_
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);
- goto err_unmap;
+ goto err_free_irq;
}
clk_prepare_enable(pp->clk);
+ pp->base = of_iomap(dn, 0);
+ if (pp->base == NULL) {
+ err = -ENOMEM;
+ goto err_clk;
+ }
+
dt_mac_addr = of_get_mac_address(dn);
if (dt_mac_addr && is_valid_ether_addr(dt_mac_addr)) {
mac_from = "device tree";
@@ -2755,12 +2765,6 @@ static int mvneta_probe(struct platform_
}
}
- pp->base = of_iomap(dn, 0);
- if (pp->base == NULL) {
- err = -ENOMEM;
- goto err_free_irq;
- }
-
pp->tx_done_timer.data = (unsigned long)dev;
pp->tx_done_timer.function = mvneta_tx_done_timer_callback;
init_timer(&pp->tx_done_timer);
@@ -2775,7 +2779,7 @@ static int mvneta_probe(struct platform_
err = mvneta_init(pp, phy_addr);
if (err < 0) {
dev_err(&pdev->dev, "can't init eth hal\n");
- goto err_clk;
+ goto err_unmap;
}
mvneta_port_power_up(pp, phy_mode);
@@ -2805,10 +2809,10 @@ static int mvneta_probe(struct platform_
err_deinit:
mvneta_deinit(pp);
-err_clk:
- clk_disable_unprepare(pp->clk);
err_unmap:
iounmap(pp->base);
+err_clk:
+ clk_disable_unprepare(pp->clk);
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
When the mvneta driver is compiled as module, the clock is disabled before it's loading. This will reset the registers values and all configuration made by the bootloader. This patch sets the "sgmii serdes configuration" register to a magical value found in: https://github.com/yellowback/ubuntu-precise-armadaxp/blob/master/arch/arm/mach-armadaxp/armada_xp_family/ctrlEnv/mvCtrlEnvLib.c With this change, the interrupts are working/generated and ethernet is working. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html