@@ -1224,8 +1224,6 @@ in this page</entry>
#define NAND_BBT_CREATE 0x00000200
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000400
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00000800
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
@@ -110,33 +110,17 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
* @td: search pattern descriptor
*
* Check for a pattern at the given place. Used to search bad block tables and
- * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
- * all bytes except the pattern area contain 0xff.
+ * good / bad block identifiers.
*/
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
- int end = 0;
- uint8_t *p = buf;
-
if (td->options & NAND_BBT_NO_OOB)
return check_pattern_no_oob(buf, td);
- end = paglen + td->offs;
- if (td->options & NAND_BBT_SCANEMPTY)
- if (memchr_inv(p, 0xff, end))
- return -1;
- p += end;
-
/* Compare the pattern */
- if (memcmp(p, td->pattern, td->len))
+ if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
return -1;
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += td->len;
- if (memchr_inv(p, 0xff, len - end))
- return -1;
- }
return 0;
}
@@ -507,15 +491,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
else
numpages = 1;
- if (!(bd->options & NAND_BBT_SCANEMPTY)) {
- /* We need only read few bytes from the OOB area */
- scanlen = 0;
- readlen = bd->len;
- } else {
- /* Full page content should be read */
- scanlen = mtd->writesize + mtd->oobsize;
- readlen = numpages * mtd->writesize;
- }
+ /* We need only read few bytes from the OOB area */
+ scanlen = 0;
+ readlen = bd->len;
if (chip == -1) {
numblocks = mtd->size >> this->bbt_erase_shift;
@@ -882,7 +860,6 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b
{
struct nand_chip *this = mtd->priv;
- bd->options &= ~NAND_BBT_SCANEMPTY;
return create_bbt(mtd, this->buffers->databuf, bd, -1);
}
@@ -159,7 +159,7 @@ static struct nand_ecclayout omap_oobinfo;
*/
static uint8_t scan_ff_pattern[] = { 0xff };
static struct nand_bbt_descr bb_descrip_flashbased = {
- .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+ .options = NAND_BBT_SCANALLPAGES,
.offs = 0,
.len = 1,
.pattern = scan_ff_pattern,
@@ -133,7 +133,6 @@ static inline int onenand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_desc
{
struct onenand_chip *this = mtd->priv;
- bd->options &= ~NAND_BBT_SCANEMPTY;
return create_bbt(mtd, this->page_buf, bd, -1);
}
@@ -93,8 +93,6 @@ struct nand_bbt_descr {
#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000800
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
NAND_BBT_SCANEMPTY is a strange, badly-supported option with omap as its single remaining user. NAND_BBT_SCANEMPTY was likely used by accident in omap2[1]. And anyway, omap2 doesn't scan the chip for bad blocks (courtesy of NAND_SKIP_BBTSCAN), and so its use of this option is irrelevant. This patch drops the NAND_BBT_SCANEMPTY option. [1] http://lists.infradead.org/pipermail/linux-mtd/2012-July/042902.html Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Ivan Djelic <ivan.djelic@parrot.com> --- Documentation/DocBook/mtdnand.tmpl | 2 -- drivers/mtd/nand/nand_bbt.c | 33 +++++---------------------------- drivers/mtd/nand/omap2.c | 2 +- drivers/mtd/onenand/onenand_bbt.c | 1 - include/linux/mtd/bbm.h | 2 -- 5 files changed, 6 insertions(+), 34 deletions(-)