Patchwork [U-Boot,v7,1/2] NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is defined

login
register
mail settings
Submitter Jim Lin
Date July 19, 2013, 9:36 a.m.
Message ID <1374226576-13401-1-git-send-email-jilin@nvidia.com>
Download mbox | patch
Permalink /patch/260230/
State Superseded
Headers show

Comments

Jim Lin - July 19, 2013, 9:36 a.m.
This flag is to have console aware that NET transfer is running or not.

Signed-off-by: Jim Lin <jilin@nvidia.com>
---
Changes in v2:
 1. Change configuration name from CONFIG_CTRLC_POLL_MS to CONFIG_CTRLC_POLL_S.
 2. New code will be executed only when CONFIG_CTRLC_POLL_S is defined in
    configuration header file.
 3. Add description in README.console.
Changes in v3:
 1. Move changes to common/usb_kbd.c and doc/README.usb
 2. Rename config setting to CONFIG_USBKB_TESTC_PERIOD.
 3. Remove slow response on USB-keyboard input when TFTP boot is not running.
Changes in v4:
 1. Remove changes in doc/README.usb, common/usb_kbd.c and
    CONFIG_USBKB_TESTC_PERIOD 
 2. Modify net/net.c
Changes in v5:
 1. Change variable name to ctrlc_t_start.
 2. Use two calls of get_timer(0) to get time gap.
Changes in v6:
 1. In common/usb_kbd.c, check net_busy_flag to determine whether we poll
    USB keyboard status.
 2. In include/usb.h, add external variable declaration net_busy_flag
Changes in v7:
 1. Add CONFIG_USB_KEYBOARD

 net/net.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

Patch

diff --git a/net/net.c b/net/net.c
index df94789..38f7bf7 100644
--- a/net/net.c
+++ b/net/net.c
@@ -206,6 +206,9 @@  uchar *NetTxPacket;
 static int net_check_prereq(enum proto_t protocol);
 
 static int NetTryCount;
+#ifdef CONFIG_USB_KEYBOARD
+int net_busy_flag;
+#endif
 
 /**********************************************************************/
 
@@ -341,6 +344,9 @@  int NetLoop(enum proto_t protocol)
 		eth_init_state_only(bd);
 
 restart:
+#ifdef CONFIG_USB_KEYBOARD
+	net_busy_flag = 0;
+#endif
 	net_set_state(NETLOOP_CONTINUE);
 
 	/*
@@ -453,6 +459,9 @@  restart:
 		status_led_set(STATUS_LED_RED, STATUS_LED_ON);
 #endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
 #endif /* CONFIG_MII, ... */
+#ifdef CONFIG_USB_KEYBOARD
+	net_busy_flag = 1;
+#endif
 
 	/*
 	 *	Main packet reception loop.  Loop receiving packets until
@@ -558,6 +567,9 @@  restart:
 	}
 
 done:
+#ifdef CONFIG_USB_KEYBOARD
+	net_busy_flag = 0;
+#endif
 #ifdef CONFIG_CMD_TFTPPUT
 	/* Clear out the handlers */
 	net_set_udp_handler(NULL);