| Message ID | 1373900227-341-11-git-send-email-denis@eukrea.com |
|---|---|
| State | New |
| Headers | show |
On Mon, Jul 15, 2013 at 04:56:55PM +0200, Denis Carikli wrote: > Only the following devices/functionalities were added: > * Main UART > * Memory node > * NAND > * i2c and its pcf8563 > * Ethernet > * LCD controller > * Sound > * ESDHC > > Signed-off-by: Denis Carikli <denis@eukrea.com> > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ > arch/arm/boot/dts/eukrea_cpuimx25.dts | 48 +++++++++++++++++ > arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi | 59 +++++++++++++++++++++ > 3 files changed, 111 insertions(+) > create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts > create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt > index e935d7d..2c19348 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -9,6 +9,10 @@ i.MX25 Product Development Kit > Required root node properties: > - compatible = "fsl,imx25-pdk", "fsl,imx25"; > > +i.MX25 Eukrea CPUIMX25 Board. > +Required root node properties: > + - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; > + > i.MX27 Product Development Kit > Required root node properties: > - compatible = "fsl,imx27-pdk", "fsl,imx27"; > diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts Currently all i.MX (and most other SoCs aswell) dts files start with the SoC prefix, so this file should be named imx25-eukrea-cpuimx25.dts. > +/dts-v1/; > +#include "imx25.dtsi" > +#include "eukrea_mbimxsd25-baseboard.dtsi" Same here. > + > +/ { > + model = "Eukrea CPUIMX25"; > + compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; As Fabio mentioned in another patch: eukrea,cpuimx25 Sascha
On Mon, Jul 15, 2013 at 04:56:55PM +0200, Denis Carikli wrote: > Only the following devices/functionalities were added: > * Main UART > * Memory node > * NAND > * i2c and its pcf8563 > * Ethernet > * LCD controller > * Sound > * ESDHC > > Signed-off-by: Denis Carikli <denis@eukrea.com> > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ > arch/arm/boot/dts/eukrea_cpuimx25.dts | 48 +++++++++++++++++ > arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi | 59 +++++++++++++++++++++ > 3 files changed, 111 insertions(+) > create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts > create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt > index e935d7d..2c19348 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -9,6 +9,10 @@ i.MX25 Product Development Kit > Required root node properties: > - compatible = "fsl,imx25-pdk", "fsl,imx25"; > > +i.MX25 Eukrea CPUIMX25 Board. > +Required root node properties: > + - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; > + This is not a board produced by Freescale, and shouldn't be added here. Also recently, it seems that documenting custom board compatible is not required as hard as before. > i.MX27 Product Development Kit > Required root node properties: > - compatible = "fsl,imx27-pdk", "fsl,imx27"; > diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts > new file mode 100644 > index 0000000..a65243c > --- /dev/null > +++ b/arch/arm/boot/dts/eukrea_cpuimx25.dts > @@ -0,0 +1,48 @@ > +/* > + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx25.dtsi" > +#include "eukrea_mbimxsd25-baseboard.dtsi" > + > +/ { > + model = "Eukrea CPUIMX25"; > + compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; > + > + memory { > + reg = <0x80000000 0x4000000>; /* 64M */ > + }; > +}; > + > +&fec { > + phy-mode = "rmii"; > + status = "okay"; Please consistently put "status" at the end of property list. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec_1>; > +}; > + > +&nfc { > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + nand-on-flash-bbt; > + status = "okay"; > +}; > + > +&i2c1 { Please sort the nodes in alphabet order. Shawn > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1_1>; > + > + pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > diff --git a/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi > new file mode 100644 > index 0000000..ffaf657 > --- /dev/null > +++ b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi > @@ -0,0 +1,59 @@ > +/* > + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include "skeleton.dtsi" > + > +/ { > + sound { > + compatible = "fsl,eukrea-tlv320"; > + model = "imx25-eukrea-tlv320aic23"; > + ssi-controller = <&ssi1>; > + fsl,audio-codec = <&tlv320aic23>; > + mux-int-port = <1>; > + mux-ext-port = <5>; > + }; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_1>; > + fsl,uart-has-rtscts; > + status = "okay"; > +}; > + > +&lcdc { > + status = "okay"; > +}; > + > +&audmux { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux_1>; > +}; > + > +&ssi1 { > + fsl,mode = "i2s-slave"; > + status = "okay"; > +}; > + > +&i2c1 { > + tlv320aic23: codec@1a { > + compatible = "ti,tlv320aic23"; > + reg = <0x1a>; > + }; > +}; > + > +&esdhc1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_esdhc1_1>; > + cd-gpios = <&gpio1 20>; > +}; > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index e935d7d..2c19348 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -9,6 +9,10 @@ i.MX25 Product Development Kit Required root node properties: - compatible = "fsl,imx25-pdk", "fsl,imx25"; +i.MX25 Eukrea CPUIMX25 Board. +Required root node properties: + - compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; + i.MX27 Product Development Kit Required root node properties: - compatible = "fsl,imx27-pdk", "fsl,imx27"; diff --git a/arch/arm/boot/dts/eukrea_cpuimx25.dts b/arch/arm/boot/dts/eukrea_cpuimx25.dts new file mode 100644 index 0000000..a65243c --- /dev/null +++ b/arch/arm/boot/dts/eukrea_cpuimx25.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx25.dtsi" +#include "eukrea_mbimxsd25-baseboard.dtsi" + +/ { + model = "Eukrea CPUIMX25"; + compatible = "fsl,eukrea_cpuimx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x4000000>; /* 64M */ + }; +}; + +&fec { + phy-mode = "rmii"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; diff --git a/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi new file mode 100644 index 0000000..ffaf657 --- /dev/null +++ b/arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" + +/ { + sound { + compatible = "fsl,eukrea-tlv320"; + model = "imx25-eukrea-tlv320aic23"; + ssi-controller = <&ssi1>; + fsl,audio-codec = <&tlv320aic23>; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&lcdc { + status = "okay"; +}; + +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&i2c1 { + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; +}; + +&esdhc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio1 20>; +};
Only the following devices/functionalities were added: * Main UART * Memory node * NAND * i2c and its pcf8563 * Ethernet * LCD controller * Sound * ESDHC Signed-off-by: Denis Carikli <denis@eukrea.com> --- Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ arch/arm/boot/dts/eukrea_cpuimx25.dts | 48 +++++++++++++++++ arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi | 59 +++++++++++++++++++++ 3 files changed, 111 insertions(+) create mode 100644 arch/arm/boot/dts/eukrea_cpuimx25.dts create mode 100644 arch/arm/boot/dts/eukrea_mbimxsd25-baseboard.dtsi