new file mode 100644
@@ -0,0 +1,280 @@
+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB-PD";
+ compatible = "fsl,P1020RDB-PD";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
+
+ /* NOR, NAND flash, L2 switch and CPLD */
+ ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+ 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x2 0x0 0x0 0xffa00000 0x00020000
+ 0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 128KB for DTB Image */
+ reg = <0x0 0x00020000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@20000 {
+ /* 3.875 MB for Linux Kernel Image */
+ reg = <0x00020000 0x003e0000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 58MB for Root file System */
+ reg = <0x00400000 0x03a00000>;
+ label = "NOR Root File System";
+ };
+
+ partition@3e00000 {
+ /* This location must not be altered */
+ /* 1M for Vitesse 7385 Switch firmware */
+ reg = <0x3e00000 0x00100000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@3f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x03f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 122MB for File System Image */
+ reg = <0x00600000 0x07a00000>;
+ label = "NAND File System Image";
+ };
+ };
+
+ cpld@2,0 {
+ compatible = "fsl,p1020rdb-pd-cpld";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ L2switch@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x3 0x0 0x20000>;
+ };
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ /* input clock */
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image*/
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 11MB for FS System Image */
+ reg = <0x00500000 0x00b00000>;
+ label = "SPI File System Image";
+ };
+ };
+
+ slic@0 {
+ compatible = "zarlink,le88266";
+ reg = <1>;
+ spi-max-frequency = <8000000>;
+ };
+
+ slic@1 {
+ compatible = "zarlink,le88266";
+ reg = <2>;
+ spi-max-frequency = <8000000>;
+ };
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0x0 0xffe09000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0x0 0xffe0a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "fsl/p1020si-post.dtsi"