Patchwork [U-Boot,V2,4/6] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk

login
register
mail settings
Submitter Nishanth Menon
Date July 11, 2013, 10:33 p.m.
Message ID <1373582005-18556-5-git-send-email-nm@ti.com>
Download mbox | patch
Permalink /patch/258632/
State Superseded
Delegated to: Tom Rini
Headers show

Comments

Nishanth Menon - July 11, 2013, 10:33 p.m.
CMD_FS_GENERIC allows us to simplify where we load up our image from
either from ext2/fat etc. So, lets use that instead of cumbersome
options we currently use. Sticking with existing conventions,
defaults will be:
ramdisk=ramdisk.gz
bootpart=0:2 (second partition)
bootdir=/boot (/boot in second partition)

This matches with the default behavior, these can be overriden by
env files as needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 include/configs/omap3_beagle.h |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

Patch

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e152d3c..bdeee17 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -150,6 +150,7 @@ 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_FS_GENERIC	/* Generic FS support */
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
@@ -211,6 +212,9 @@ 
 	"rdaddr=0x81000000\0" \
 	"usbtty=cdc_acm\0" \
 	"bootfile=uImage\0" \
+	"ramdisk=ramdisk.gz\0" \
+	"bootdir=/boot\0" \
+	"bootpart=0:2\0" \
 	"console=ttyO2,115200n8\0" \
 	"mpurate=auto\0" \
 	"buddy=none\0" \
@@ -259,9 +263,8 @@ 
 		"omapdss.def_disp=${defaultdisplay} " \
 		"root=${ramroot} " \
 		"rootfstype=${ramrootfstype}\0" \
-	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
+	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -293,7 +296,7 @@ 
 			"echo Running uenvcmd ...;" \
 			"run uenvcmd;" \
 		"fi;" \
-		"if run loaduimage; then " \
+		"if run loadimage; then " \
 			"run mmcboot;" \
 		"fi;" \
 	"fi;" \