From patchwork Thu Apr 9 12:19:45 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jean Delvare X-Patchwork-Id: 25778 X-Patchwork-Delegate: paulus@samba.org Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from ozlabs.org (localhost [127.0.0.1]) by ozlabs.org (Postfix) with ESMTP id 3903ADE4C5 for ; Thu, 9 Apr 2009 22:20:26 +1000 (EST) X-Original-To: linuxppc-dev@ozlabs.org Delivered-To: linuxppc-dev@ozlabs.org Received: from services.gcu-squad.org (zone0.gcu-squad.org [212.85.147.21]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id 829ABDE107 for ; Thu, 9 Apr 2009 22:20:03 +1000 (EST) Received: from jdelvare.pck.nerim.net ([62.212.121.182] helo=hyperion.delvare) by services.gcu-squad.org (GCU Mailer Daemon) with esmtpsa id 1LruJZ-0005mF-Lj (TLSv1:AES256-SHA:256) (envelope-from ) ; Thu, 09 Apr 2009 15:29:09 +0200 Date: Thu, 9 Apr 2009 14:19:45 +0200 From: Jean Delvare To: Johannes Berg Subject: Re: [PATCH] AOA: Convert onyx and tas codecs to new-style i2c drivers Message-ID: <20090409141945.116772e3@hyperion.delvare> In-Reply-To: <1239263089.24548.30.camel@johannes.local> References: <20090408150249.5a62a56c@hyperion.delvare> <1239205899.16477.32.camel@johannes.local> <20090408224858.04cb6dc4@hyperion.delvare> <1239263089.24548.30.camel@johannes.local> X-Mailer: Claws Mail 3.5.0 (GTK+ 2.14.4; x86_64-suse-linux-gnu) Mime-Version: 1.0 Cc: Benjamin@ozlabs.org, linuxppc-dev@ozlabs.org, alsa-devel@alsa-project.org, Takashi Iwai X-BeenThere: linuxppc-dev@ozlabs.org X-Mailman-Version: 2.1.11 Precedence: list List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@ozlabs.org Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@ozlabs.org Hi Johannes, On Thu, 09 Apr 2009 09:44:49 +0200, Johannes Berg wrote: > > Can you please point me to the layout fabric / aoa fabric? I'd like to > > understand how it works. Then I may be able to rewrite my patch > > completely differently. > > That's in sound/aoa/fabric/layout.c OK, I understand how it works now, thanks for pointing me to the relevant piece of code. It's easier to modify the code when you understand the current logic ;) > > There are basically two ways to instantiate I2C devices in the new > > model. The first method is to declare the I2C devices as platform data > > and let i2c-core instantiate them. The second method is to have the i2c > > bus driver instantiate the clients. My patch uses the second method > > because I didn't know how to use the first method. However using the > > first method would solve the issues you raised. But I need some help > > from someone more familiar with the powermac platform initialization > > code to get it right. > > Interesting. Does it need to be _platform_ data, or could > sound/aoa/fabric/layout.c declare the devices instead? It can be anywhere as long as it is early enough. Early enough means that the code must run before device drivers can loaded. As snd-aoa-fabric-layout can be built as a module, it doesn't seem right. The idea is to assign fixed i2c bus numbers to the relevant i2c buses, and declare the i2c devices connected to each bus by bus number and device address. The i2c-powermac buses are created in arch/powerpc/platforms/powermac/low_i2c.c, so you would have to instantiate the i2c devices there too. That would basically mean merging part of snd-aoa-fabric-layout into arch/powerpc/platforms/powermac/low_i2c.c as I understand it, I don't know if this sounds reasonable to you. More generally, in order to instantiate an i2c device (for the new binding model), you need at least two things: a reference to the underlying i2c bus, and the address of the i2c device. The address can be read from the device tree, but what is more difficult is to get the reference to the underlying i2c bus. That reference can be the i2c_adapter number (which only makes sense in a fixed-bus-number scheme), or a pointer to the i2c_adapter. For now the powermac systems do not have fixed i2c bus numbers, which is why I put the code instantiating the devices in i2c-powermac: there I have a pointer to the i2c_adapter. So I think we have two options: switch the powermac systems to fixed i2c bus numbers and instantiate the i2c sound devices from arch/powerpc/platforms/powermac/*, or find a way to obtain a reference to the relevant i2c_adapter. I think I have found a way to achieve the latter. This isn't exactly how the new model was supposed to work, but it has the advantage to be way less intrusive than my original proposal. It may require larger changes in the future as the i2c-core cleanups go on, but this should do for now. > > (...) > > I think I've found that one by now (snd_pmac_detect in > > sound/ppc/pmac.c, right?), thanks for the clarification. > > That's snd-powermac, yes. > > > BTW, that code doesn't seem significantly different from what my patch > > is adding to i2c-powermac. > > That would be true, yes, with your patch I don't understand how to load > snd-powermac _or_ snd-aoa based on the platform data (or in the case of > snd-powermac, not load it automatically at all). My patch was really only about snd-aoa, it did not take care about snd-powermac at all, because I expected them to be essentially independent. Of course, if the code I added to i2c-powermac instantiates devices on systems which were previous handled by snd-powermac, it would break. More work would be needed to handle the systems supported by snd-powermac. > (...) > Oh ok, that kinda ties in with my very first question about what happens > if the same chip is known in different contexts, on different buses etc. > Makes sense in that case I guess. But I still think that you shouldn't > auto-load the aoa codec modules based on this anyway. My new approach doesn't auto-load anything. Here we go, what you think? This time there is no logic change, I'm really only turning legacy code into new-style i2c code (basically calling i2c_new_device() instead of i2c_attach_client()) and that's about it. (Once again this is only build-tested and I would like people with the hardware to give it a try.) From: Jean Delvare Subject: AOA: Convert onyx and tas codecs to new-style i2c drivers The legacy i2c binding model is going away soon, so convert the AOA codec drivers to the new model or they'll break. Signed-off-by: Jean Delvare Cc: Johannes Berg Cc: Benjamin Herrenschmidt --- sound/aoa/codecs/onyx.c | 71 +++++++++++++++++++++++++++++------------------ sound/aoa/codecs/tas.c | 63 +++++++++++++++++++++++++---------------- 2 files changed, 84 insertions(+), 50 deletions(-) --- linux-2.6.30-rc1.orig/sound/aoa/codecs/onyx.c 2009-04-09 11:53:11.000000000 +0200 +++ linux-2.6.30-rc1/sound/aoa/codecs/onyx.c 2009-04-09 13:58:44.000000000 +0200 @@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec struct onyx { /* cache registers 65 to 80, they are write-only! */ u8 cache[16]; - struct i2c_client i2c; + struct i2c_client *i2c; struct aoa_codec codec; u32 initialised:1, spdif_locked:1, @@ -72,7 +72,7 @@ static int onyx_read_register(struct ony *value = onyx->cache[reg-FIRSTREGISTER]; return 0; } - v = i2c_smbus_read_byte_data(&onyx->i2c, reg); + v = i2c_smbus_read_byte_data(onyx->i2c, reg); if (v < 0) return -1; *value = (u8)v; @@ -84,7 +84,7 @@ static int onyx_write_register(struct on { int result; - result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value); + result = i2c_smbus_write_byte_data(onyx->i2c, reg, value); if (!result) onyx->cache[reg-FIRSTREGISTER] = value; return result; @@ -996,12 +996,38 @@ static void onyx_exit_codec(struct aoa_c onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); } -static struct i2c_driver onyx_driver; - static int onyx_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE); + if (node) { + info.addr = addr; + info.platform_data = node; + client = i2c_new_device(adapter, &info); + } else { + /* probe both possible addresses for the onyx chip */ + unsigned short probe_onyx[] = { + 0x46, 0x47, I2C_CLIENT_END + }; + + client = i2c_new_probed_device(adapter, &info, probe_onyx); + } + if (!client) + return -ENODEV; + + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int onyx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct onyx *onyx; u8 dummy; @@ -1011,20 +1037,12 @@ static int onyx_create(struct i2c_adapte return -ENOMEM; mutex_init(&onyx->mutex); - onyx->i2c.driver = &onyx_driver; - onyx->i2c.adapter = adapter; - onyx->i2c.addr = addr & 0x7f; - strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&onyx->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } + onyx->i2c = client; + i2c_set_clientdata(client, onyx); /* we try to read from register ONYX_REG_CONTROL * to check if the codec is present */ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) { - i2c_detach_client(&onyx->i2c); printk(KERN_ERR PFX "failed to read control register\n"); goto fail; } @@ -1036,7 +1054,6 @@ static int onyx_create(struct i2c_adapte onyx->codec.node = of_node_get(node); if (aoa_codec_register(&onyx->codec)) { - i2c_detach_client(&onyx->i2c); goto fail; } printk(KERN_DEBUG PFX "created and attached onyx instance\n"); @@ -1074,19 +1091,13 @@ static int onyx_i2c_attach(struct i2c_ad return -ENODEV; printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n"); - /* probe both possible addresses for the onyx chip */ - if (onyx_create(adapter, NULL, 0x46) == 0) - return 0; - return onyx_create(adapter, NULL, 0x47); + return onyx_create(adapter, NULL, 0); } -static int onyx_i2c_detach(struct i2c_client *client) +static int onyx_i2c_remove(struct i2c_client *client) { - struct onyx *onyx = container_of(client, struct onyx, i2c); - int err; + struct onyx *onyx = i2c_get_clientdata(client); - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&onyx->codec); of_node_put(onyx->codec.node); if (onyx->codec_info) @@ -1095,13 +1106,21 @@ static int onyx_i2c_detach(struct i2c_cl return 0; } +static const struct i2c_device_id onyx_i2c_id[] = { + { "aoa_codec_onyx", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, onyx_i2c_id); + static struct i2c_driver onyx_driver = { .driver = { .name = "aoa_codec_onyx", .owner = THIS_MODULE, }, .attach_adapter = onyx_i2c_attach, - .detach_client = onyx_i2c_detach, + .probe = onyx_i2c_probe, + .remove = onyx_i2c_remove, + .id_table = onyx_i2c_id, }; static int __init onyx_init(void) --- linux-2.6.30-rc1.orig/sound/aoa/codecs/tas.c 2009-04-09 11:53:11.000000000 +0200 +++ linux-2.6.30-rc1/sound/aoa/codecs/tas.c 2009-04-09 13:58:41.000000000 +0200 @@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for struct tas { struct aoa_codec codec; - struct i2c_client i2c; + struct i2c_client *i2c; u32 mute_l:1, mute_r:1 , controls_created:1 , drc_enabled:1, @@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct a static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data) { if (len == 1) - return i2c_smbus_write_byte_data(&tas->i2c, reg, *data); + return i2c_smbus_write_byte_data(tas->i2c, reg, *data); else - return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data); + return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data); } static void tas3004_set_drc(struct tas *tas) @@ -882,12 +882,30 @@ static void tas_exit_codec(struct aoa_co } -static struct i2c_driver tas_driver; - static int tas_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int tas_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct tas *tas; tas = kzalloc(sizeof(struct tas), GFP_KERNEL); @@ -896,17 +914,11 @@ static int tas_create(struct i2c_adapter return -ENOMEM; mutex_init(&tas->mtx); - tas->i2c.driver = &tas_driver; - tas->i2c.adapter = adapter; - tas->i2c.addr = addr; + tas->i2c = client; + i2c_set_clientdata(client, tas); + /* seems that half is a saner default */ tas->drc_range = TAS3004_DRC_MAX / 2; - strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&tas->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN); tas->codec.owner = THIS_MODULE; @@ -915,14 +927,12 @@ static int tas_create(struct i2c_adapter tas->codec.node = of_node_get(node); if (aoa_codec_register(&tas->codec)) { - goto detach; + goto fail; } printk(KERN_DEBUG "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n", - addr, node->full_name); + (unsigned int)client->addr, node->full_name); return 0; - detach: - i2c_detach_client(&tas->i2c); fail: mutex_destroy(&tas->mtx); kfree(tas); @@ -970,14 +980,11 @@ static int tas_i2c_attach(struct i2c_ada return -ENODEV; } -static int tas_i2c_detach(struct i2c_client *client) +static int tas_i2c_remove(struct i2c_client *client) { - struct tas *tas = container_of(client, struct tas, i2c); - int err; + struct tas *tas = i2c_get_clientdata(client); u8 tmp = TAS_ACR_ANALOG_PDOWN; - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&tas->codec); of_node_put(tas->codec.node); @@ -989,13 +996,21 @@ static int tas_i2c_detach(struct i2c_cli return 0; } +static const struct i2c_device_id tas_i2c_id[] = { + { "aoa_codec_tas", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas_i2c_id); + static struct i2c_driver tas_driver = { .driver = { .name = "aoa_codec_tas", .owner = THIS_MODULE, }, .attach_adapter = tas_i2c_attach, - .detach_client = tas_i2c_detach, + .probe = tas_i2c_probe, + .remove = tas_i2c_remove, + .id_table = tas_i2c_id, }; static int __init tas_init(void)