Patchwork [U-Boot] OMAP5: USB_EHCI: Enable ehci support for omap5

login
register
mail settings
Submitter Dan Murphy
Date July 8, 2013, 8:59 p.m.
Message ID <1373317175-28926-1-git-send-email-dmurphy@ti.com>
Download mbox | patch
Permalink /patch/257607/
State Superseded
Delegated to: Tom Rini
Headers show

Comments

Dan Murphy - July 8, 2013, 8:59 p.m.
From: "Govindraj.R" <govindraj.raja@ti.com>

* Enable all usb ehci related clocks.
* Add ehci support to omap5 board file and arch specific
  sysc reg mask values.
* Enable config options for usb support and ethernet support

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
---
 arch/arm/cpu/armv7/omap5/clocks.c        |   20 +++++++++++---
 arch/arm/include/asm/arch-omap5/clocks.h |    6 ++++
 arch/arm/include/asm/arch-omap5/ehci.h   |   44 ++++++++++++++++++++++++++++++
 board/ti/omap5_evm/evm.c                 |   33 ++++++++++++++++++++++
 include/configs/omap5_evm5430.h          |   23 ++++++++++++++--
 5 files changed, 120 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
Lokesh Vutla - July 9, 2013, 3:21 a.m.
Hi Dan,
On Tuesday 09 July 2013 02:29 AM, Dan Murphy wrote:
> From: "Govindraj.R" <govindraj.raja@ti.com>
> 
> * Enable all usb ehci related clocks.
> * Add ehci support to omap5 board file and arch specific
>   sysc reg mask values.
> * Enable config options for usb support and ethernet support
> 
> Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
> ---
>  arch/arm/cpu/armv7/omap5/clocks.c        |   20 +++++++++++---
>  arch/arm/include/asm/arch-omap5/clocks.h |    6 ++++
>  arch/arm/include/asm/arch-omap5/ehci.h   |   44 ++++++++++++++++++++++++++++++
>  board/ti/omap5_evm/evm.c                 |   33 ++++++++++++++++++++++
>  include/configs/omap5_evm5430.h          |   23 ++++++++++++++--
>  5 files changed, 120 insertions(+), 6 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
Is this based on current mainline?
Most of the above files changed are not preset in mainline.
> 
> diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
> index 7e69d2b..f914b60 100644
> --- a/arch/arm/cpu/armv7/omap5/clocks.c
> +++ b/arch/arm/cpu/armv7/omap5/clocks.c
> @@ -375,6 +375,8 @@ void enable_basic_clocks(void)
>  		&prcm->cm_l4per_gpio4_clkctrl,
>  		&prcm->cm_l4per_gpio5_clkctrl,
>  		&prcm->cm_l4per_gpio6_clkctrl,
> +		&prcm->cm_clksel_usb_60mhz,
> +		&prcm->cm_l3init_hsusbtll_clkctrl,
>  		0
>  	};
>  
> @@ -385,6 +387,7 @@ void enable_basic_clocks(void)
>  		&prcm->cm_wkup_wdtimer2_clkctrl,
>  		&prcm->cm_l4per_uart3_clkctrl,
>  		&prcm->cm_l4per_i2c1_clkctrl,
> +		&prcm->cm_l3init_hsusbhost_clkctrl,
>  		0
>  	};
>  
> @@ -408,10 +411,13 @@ void enable_basic_clocks(void)
>  	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
>  			GPTIMER1_CLKCTRL_CLKSEL_MASK);
>  
> -	do_enable_clocks(clk_domains_essential,
> -			 clk_modules_hw_auto_essential,
> -			 clk_modules_explicit_en_essential,
> -			 1);
> +	/* Enbale all 3 usb ports enable uhh, utmi and hsic clocks*/
> +	setbits_le32(&prcm->cm_l3init_hsusbhost_clkctrl,
> +			USB_HOST_HS_CLKCTRL_MASK);
> +
> +	/* Enbale all 3 usb host ports tll clocks*/
> +	setbits_le32(&prcm->cm_l3init_hsusbtll_clkctrl,
> +			USB_TLL_HS_CLKCTRL_MASK);
Please keep this under a CONFIG_*_USB_* macro.

Thanks, 
Lokesh
>  
>  	/* Select 384Mhz for GPU as its the POR for ES1.0 */
>  	setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
> @@ -429,6 +435,12 @@ void enable_basic_clocks(void)
>  	setbits_le32(&prcm->cm_coreaon_bandgap_clkctrl,
>  		((OMAP_TS_CLK_ENABLE_MASK | OMAP_19M_TS_CLK_DIVIDER_MASK)
>  			& ~OMAP_38M_TS_CLK_DIVIDER_MASK));
> +
> +	do_enable_clocks(clk_domains_essential,
> +			 clk_modules_hw_auto_essential,
> +			 clk_modules_explicit_en_essential,
> +			 1);
> +
>  }
>  
>  void enable_basic_uboot_clocks(void)
> diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
> index c944f35..43fc5b8 100644
> --- a/arch/arm/include/asm/arch-omap5/clocks.h
> +++ b/arch/arm/include/asm/arch-omap5/clocks.h
> @@ -613,6 +613,12 @@ struct omap5_prcm_regs {
>  /* CM_L3INIT_USBPHY_CLKCTRL */
>  #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
>  
> +/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
> +#define USB_HOST_HS_CLKCTRL_MASK		0xFFC0
> +
> +/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
> +#define USB_TLL_HS_CLKCTRL_MASK			0x700
> +
>  /* CM_MPU_MPU_CLKCTRL */
>  #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
>  #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(1 << 24)
> diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h
> new file mode 100644
> index 0000000..49197f2
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-omap5/ehci.h
> @@ -0,0 +1,44 @@
> +/*
> + * OMAP EHCI port support
> + * Based on LINUX KERNEL
> + * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
> + * Author: Govindraj R <govindraj.raja@ti.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2  of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _EHCI_H
> +#define _EHCI_H
> +
> +#define OMAP_EHCI_BASE				(OMAP54XX_L4_CORE_BASE + 0x64C00)
> +#define OMAP_UHH_BASE				(OMAP54XX_L4_CORE_BASE + 0x64000)
> +#define OMAP_USBTLL_BASE			(OMAP54XX_L4_CORE_BASE + 0x62000)
> +
> +/* TLL Register Set */
> +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE		(1 << 3)
> +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP		(1 << 2)
> +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET		(1 << 1)
> +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY		(1 << 8)
> +#define OMAP_USBTLL_SYSSTATUS_RESETDONE		1
> +
> +#define OMAP_UHH_SYSCONFIG_SOFTRESET		1
> +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE	(1 << 2)
> +#define OMAP_UHH_SYSCONFIG_NOIDLE		(1 << 2)
> +#define OMAP_UHH_SYSCONFIG_NOSTDBY		(1 << 4)
> +
> +#define OMAP_UHH_SYSCONFIG_VAL	(OMAP_UHH_SYSCONFIG_NOIDLE | \
> +					OMAP_UHH_SYSCONFIG_NOSTDBY)
> +
> +#endif /* _EHCI_H */
> diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
> index 7b426d9..30fcd95 100644
> --- a/board/ti/omap5_evm/evm.c
> +++ b/board/ti/omap5_evm/evm.c
> @@ -29,6 +29,12 @@
>  
>  #include "mux_data.h"
>  
> +#ifdef CONFIG_USB_EHCI
> +#include <usb.h>
> +#include <asm/arch/ehci.h>
> +#include <asm/ehci-omap.h>
> +#endif
> +
>  DECLARE_GLOBAL_DATA_PTR;
>  
>  const struct omap_sysinfo sysinfo = {
> @@ -107,3 +113,30 @@ int board_mmc_init(bd_t *bis)
>  }
>  #endif
>  #endif
> +
> +#ifdef CONFIG_USB_EHCI
> +static struct omap_usbhs_board_data usbhs_bdata = {
> +	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
> +	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
> +	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
> +};
> +
> +int ehci_hcd_init(void)
> +{
> +	int ret;
> +
> +	ret = omap_ehci_hcd_init(&usbhs_bdata);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +int ehci_hcd_stop(void)
> +{
> +	int ret;
> +
> +	ret = omap_ehci_hcd_stop();
> +	return ret;
> +}
> +#endif
> diff --git a/include/configs/omap5_evm5430.h b/include/configs/omap5_evm5430.h
> index 3145e53..e81c560 100644
> --- a/include/configs/omap5_evm5430.h
> +++ b/include/configs/omap5_evm5430.h
> @@ -128,6 +128,27 @@
>  /* Flash */
>  #define CONFIG_SYS_NO_FLASH	1
>  
> +/* USB UHH support options */
> +#define CONFIG_CMD_USB
> +#define CONFIG_USB_HOST
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_OMAP
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> +
> +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 172
> +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 173
> +
> +/* Enabled commands */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_CMD_DHCP		/* DHCP Support			*/
> +#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
> +#define CONFIG_CMD_NFS		/* NFS support			*/
> +
> +/* USB Networking options */
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_SMSC95XX
> +
>  /* commands to include */
>  #include <config_cmd_default.h>
>  
> @@ -139,8 +160,6 @@
>  #define CONFIG_CMD_SAVEENV
>  
>  /* Disabled commands */
> -#undef CONFIG_CMD_NET
> -#undef CONFIG_CMD_NFS
>  #undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
>  #undef CONFIG_CMD_IMLS		/* List all found images        */
>  
>
Dan Murphy - July 10, 2013, 3:02 p.m.
Lokesh
On 07/08/2013 10:21 PM, Lokesh Vutla wrote:
> Hi Dan,
> On Tuesday 09 July 2013 02:29 AM, Dan Murphy wrote:
>> From: "Govindraj.R" <govindraj.raja@ti.com>
>>
>> * Enable all usb ehci related clocks.
>> * Add ehci support to omap5 board file and arch specific
>>   sysc reg mask values.
>> * Enable config options for usb support and ethernet support
>>
>> Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
>> ---
>>  arch/arm/cpu/armv7/omap5/clocks.c        |   20 +++++++++++---
>>  arch/arm/include/asm/arch-omap5/clocks.h |    6 ++++
>>  arch/arm/include/asm/arch-omap5/ehci.h   |   44 ++++++++++++++++++++++++++++++
>>  board/ti/omap5_evm/evm.c                 |   33 ++++++++++++++++++++++
>>  include/configs/omap5_evm5430.h          |   23 ++++++++++++++--
>>  5 files changed, 120 insertions(+), 6 deletions(-)
>>  create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
> Is this based on current mainline?
> Most of the above files changed are not preset in mainline.

Honestly I have no idea how this patch got posted.

I will remove this patch in v2.
> <snip>
Dan Murphy - July 10, 2013, 3:03 p.m.
Lokesh
On 07/08/2013 10:21 PM, Lokesh Vutla wrote:
> Hi Dan,
> On Tuesday 09 July 2013 02:29 AM, Dan Murphy wrote:
>> From: "Govindraj.R" <govindraj.raja@ti.com>
>>
>> * Enable all usb ehci related clocks.
>> * Add ehci support to omap5 board file and arch specific
>>   sysc reg mask values.
>> * Enable config options for usb support and ethernet support
>>
>> Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
>> ---
>>  arch/arm/cpu/armv7/omap5/clocks.c        |   20 +++++++++++---
>>  arch/arm/include/asm/arch-omap5/clocks.h |    6 ++++
>>  arch/arm/include/asm/arch-omap5/ehci.h   |   44 ++++++++++++++++++++++++++++++
>>  board/ti/omap5_evm/evm.c                 |   33 ++++++++++++++++++++++
>>  include/configs/omap5_evm5430.h          |   23 ++++++++++++++--
>>  5 files changed, 120 insertions(+), 6 deletions(-)
>>  create mode 100644 arch/arm/include/asm/arch-omap5/ehci.h
> Is this based on current mainline?
> Most of the above files changed are not preset in mainline.

Honestly I have no idea how this patch got posted.

I will remove this patch in v2.
> <snip>

Patch

diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index 7e69d2b..f914b60 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -375,6 +375,8 @@  void enable_basic_clocks(void)
 		&prcm->cm_l4per_gpio4_clkctrl,
 		&prcm->cm_l4per_gpio5_clkctrl,
 		&prcm->cm_l4per_gpio6_clkctrl,
+		&prcm->cm_clksel_usb_60mhz,
+		&prcm->cm_l3init_hsusbtll_clkctrl,
 		0
 	};
 
@@ -385,6 +387,7 @@  void enable_basic_clocks(void)
 		&prcm->cm_wkup_wdtimer2_clkctrl,
 		&prcm->cm_l4per_uart3_clkctrl,
 		&prcm->cm_l4per_i2c1_clkctrl,
+		&prcm->cm_l3init_hsusbhost_clkctrl,
 		0
 	};
 
@@ -408,10 +411,13 @@  void enable_basic_clocks(void)
 	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
 			GPTIMER1_CLKCTRL_CLKSEL_MASK);
 
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
+	/* Enbale all 3 usb ports enable uhh, utmi and hsic clocks*/
+	setbits_le32(&prcm->cm_l3init_hsusbhost_clkctrl,
+			USB_HOST_HS_CLKCTRL_MASK);
+
+	/* Enbale all 3 usb host ports tll clocks*/
+	setbits_le32(&prcm->cm_l3init_hsusbtll_clkctrl,
+			USB_TLL_HS_CLKCTRL_MASK);
 
 	/* Select 384Mhz for GPU as its the POR for ES1.0 */
 	setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
@@ -429,6 +435,12 @@  void enable_basic_clocks(void)
 	setbits_le32(&prcm->cm_coreaon_bandgap_clkctrl,
 		((OMAP_TS_CLK_ENABLE_MASK | OMAP_19M_TS_CLK_DIVIDER_MASK)
 			& ~OMAP_38M_TS_CLK_DIVIDER_MASK));
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+
 }
 
 void enable_basic_uboot_clocks(void)
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index c944f35..43fc5b8 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -613,6 +613,12 @@  struct omap5_prcm_regs {
 /* CM_L3INIT_USBPHY_CLKCTRL */
 #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
 
+/* CM_L3INIT_USB_HOST_HS_CLKCTRL */
+#define USB_HOST_HS_CLKCTRL_MASK		0xFFC0
+
+/* CM_L3INIT_USB_TLL_HS_CLKCTRL */
+#define USB_TLL_HS_CLKCTRL_MASK			0x700
+
 /* CM_MPU_MPU_CLKCTRL */
 #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
 #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(1 << 24)
diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h
new file mode 100644
index 0000000..49197f2
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/ehci.h
@@ -0,0 +1,44 @@ 
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _EHCI_H
+#define _EHCI_H
+
+#define OMAP_EHCI_BASE				(OMAP54XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE				(OMAP54XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE			(OMAP54XX_L4_CORE_BASE + 0x62000)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE		(1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP		(1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET		(1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY		(1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE		1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET		1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE	(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE		(1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY		(1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL	(OMAP_UHH_SYSCONFIG_NOIDLE | \
+					OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _EHCI_H */
diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
index 7b426d9..30fcd95 100644
--- a/board/ti/omap5_evm/evm.c
+++ b/board/ti/omap5_evm/evm.c
@@ -29,6 +29,12 @@ 
 
 #include "mux_data.h"
 
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct omap_sysinfo sysinfo = {
@@ -107,3 +113,30 @@  int board_mmc_init(bd_t *bis)
 }
 #endif
 #endif
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
+	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+int ehci_hcd_init(void)
+{
+	int ret;
+
+	ret = omap_ehci_hcd_init(&usbhs_bdata);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+	int ret;
+
+	ret = omap_ehci_hcd_stop();
+	return ret;
+}
+#endif
diff --git a/include/configs/omap5_evm5430.h b/include/configs/omap5_evm5430.h
index 3145e53..e81c560 100644
--- a/include/configs/omap5_evm5430.h
+++ b/include/configs/omap5_evm5430.h
@@ -128,6 +128,27 @@ 
 /* Flash */
 #define CONFIG_SYS_NO_FLASH	1
 
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 172
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 173
+
+/* Enabled commands */
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NFS		/* NFS support			*/
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -139,8 +160,6 @@ 
 #define CONFIG_CMD_SAVEENV
 
 /* Disabled commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
 #undef CONFIG_CMD_IMLS		/* List all found images        */