diff mbox

[3/4] mmc: esdhc: Add quirks to support T4240 board

Message ID 1373249545-23928-3-git-send-email-Haijun.Zhang@freescale.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Haijun.Zhang July 8, 2013, 2:12 a.m. UTC 
On T4240 board controllers has an unusable ADMA engine, so use SDMA instead.
Also 3.0v is support on T4240 board even if the capacity detailed only 1.8v
support. Without this quirk SD card will declare voltage not support and

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
---
 drivers/mmc/host/sdhci-pltfm.c | 5 +++++
 drivers/mmc/host/sdhci.c       | 3 +++
 include/linux/mmc/sdhci.h      | 2 ++
 3 files changed, 10 insertions(+)
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index e2065a4..02edb3d 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -92,6 +92,11 @@  void sdhci_get_of_property(struct platform_device *pdev)
 		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
 			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
 
+		if (of_device_is_compatible(np, "fsl,t4240-esdhc")) {
+			host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+			host->quirks2 |= SDHCI_QUIRK2_CIRCUIT_SUPPORT_VS30;
+		}
+
 		if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
 		    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
 		    of_device_is_compatible(np, "fsl,t4240-esdhc") ||
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a78bd4f..de7fa81 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2797,6 +2797,9 @@  int sdhci_add_host(struct sdhci_host *host)
 			host->caps1 :
 			sdhci_readl(host, SDHCI_CAPABILITIES_1);
 
+	if (host->quirks2 & SDHCI_QUIRK2_CIRCUIT_SUPPORT_VS30)
+		caps[0] = caps[0] | SDHCI_CAN_VDD_300;
+
 	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_SDMA;
 	else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index e3c6a74..dc608d7 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -98,6 +98,8 @@  struct sdhci_host {
 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
 /* Controller has a non-standard host control register */
 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
+/* The host support VS300 even if the capacity detailed not */
+#define SDHCI_QUIRK2_CIRCUIT_SUPPORT_VS30		(1<<6)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */