| Message ID | 1372944549-19794-1-git-send-email-holger.brunck@keymile.com |
|---|---|
| State | Superseded |
| Delegated to: | Prafulla Wadaskar |
| Headers | show |
Hi Prafulla, hi Albert, we are not so far away from v2013.10 I guess, so could one of you please pick of these small patch series? Thanks! Note for this patch there is already a v2 posted which applies cleanly again. So there were: http://patchwork.ozlabs.org/patch/275613/ http://patchwork.ozlabs.org/patch/256901/ http://patchwork.ozlabs.org/patch/256900/ Regards Holger On 07/04/2013 03:29 PM, Holger Brunck wrote: > From: Karlheinz Jerg <karlheinz.jerg@keymile.com> > > The board is similar to the standard km_kirkwood board. From a > u-boot point of view, the only difference is an increased > 256 MiB DRAM (128M16). A board based on this design is for > example the SUP12. > > Signed-off-by: Karlheinz Jerg <karlheinz.jerg@keymile.com> > Signed-off-by: Holger Brunck <holger.brunck@keymile.com> > --- > boards.cfg | 1 + > include/configs/km_kirkwood.h | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/boards.cfg b/boards.cfg > index c0c4282..2bb493f 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -165,6 +165,7 @@ lschlv2 arm arm926ejs lsxl buffalo > lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL > km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD > km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI > +km_kirkwood_128m16 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_128M16 > kmnusa arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_NUSA > kmsuv31 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_SUV31 > mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN > diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h > index 83bb7aa..2b5f389 100644 > --- a/include/configs/km_kirkwood.h > +++ b/include/configs/km_kirkwood.h > @@ -51,6 +51,16 @@ > #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > #define CONFIG_KM_FPGA_CONFIG > > +/* KM_KIRKWOOD_128M16 */ > +#elif defined(CONFIG_KM_KIRKWOOD_128M16) > +#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" > +#define CONFIG_HOSTNAME km_kirkwood_128m16 > +#undef CONFIG_SYS_KWD_CONFIG > +#define CONFIG_SYS_KWD_CONFIG \ > + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg > +#define CONFIG_KM_DISABLE_PCIE > +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > + > /* KM_NUSA */ > #elif defined(CONFIG_KM_NUSA) > #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ >
> -----Original Message----- > From: Holger Brunck [mailto:holger.brunck@keymile.com] > Sent: 25 September 2013 12:50 > To: Prafulla Wadaskar; albert.u.boot@aribaud.net > Cc: u-boot@lists.denx.de; Valentin Longchamp > Subject: Re: [PATCH 1/3] arm/km: add support for > km_kirkwood_128m16 board > > Hi Prafulla, hi Albert, > we are not so far away from v2013.10 I guess, so could > one of you please pick of > these small patch series? Thanks! > > Note for this patch there is already a v2 posted which > applies cleanly again. > > So there were: > http://patchwork.ozlabs.org/patch/275613/ > http://patchwork.ozlabs.org/patch/256901/ > http://patchwork.ozlabs.org/patch/256900/ Dear Holger I have pulled these patches to u-boot-marvell.git. Will send the pull request soon. Regards... Prafulla . . . > > Regards > Holger > > On 07/04/2013 03:29 PM, Holger Brunck wrote: > > From: Karlheinz Jerg <karlheinz.jerg@keymile.com> > > > > The board is similar to the standard km_kirkwood > board. From a > > u-boot point of view, the only difference is an > increased > > 256 MiB DRAM (128M16). A board based on this design > is for > > example the SUP12. > > > > Signed-off-by: Karlheinz Jerg > <karlheinz.jerg@keymile.com> > > Signed-off-by: Holger Brunck > <holger.brunck@keymile.com> > > --- > > boards.cfg | 1 + > > include/configs/km_kirkwood.h | 10 ++++++++++ > > 2 files changed, 11 insertions(+) > > > > diff --git a/boards.cfg b/boards.cfg > > index c0c4282..2bb493f 100644 > > --- a/boards.cfg > > +++ b/boards.cfg > > @@ -165,6 +165,7 @@ lschlv2 arm > arm926ejs lsxl buffalo > > lsxhl arm arm926ejs > lsxl buffalo kirkwood > lsxl:LSXHL > > km_kirkwood arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_KIRKWOOD > > km_kirkwood_pci arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_KIRKWOOD_PCI > > +km_kirkwood_128m16 arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_KIRKWOOD_128M16 > > kmnusa arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_NUSA > > kmsuv31 arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_SUV31 > > mgcoge3un arm arm926ejs > km_arm keymile kirkwood > km_kirkwood:KM_MGCOGE3UN > > diff --git a/include/configs/km_kirkwood.h > b/include/configs/km_kirkwood.h > > index 83bb7aa..2b5f389 100644 > > --- a/include/configs/km_kirkwood.h > > +++ b/include/configs/km_kirkwood.h > > @@ -51,6 +51,16 @@ > > #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 > (Mux-Port 1)*/ > > #define CONFIG_KM_FPGA_CONFIG > > > > +/* KM_KIRKWOOD_128M16 */ > > +#elif defined(CONFIG_KM_KIRKWOOD_128M16) > > +#define CONFIG_IDENT_STRING "\nKeymile > Kirkwood 128M16" > > +#define CONFIG_HOSTNAME km_kirkwood_128m16 > > +#undef CONFIG_SYS_KWD_CONFIG > > +#define CONFIG_SYS_KWD_CONFIG \ > > + > $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg > > +#define CONFIG_KM_DISABLE_PCIE > > +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 > (Mux-Port 1)*/ > > + > > /* KM_NUSA */ > > #elif defined(CONFIG_KM_NUSA) > > #define KM_IVM_BUS "pca9547:70:9" /* I2C2 > (Mux-Port 1)*/ > >
diff --git a/boards.cfg b/boards.cfg index c0c4282..2bb493f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -165,6 +165,7 @@ lschlv2 arm arm926ejs lsxl buffalo lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI +km_kirkwood_128m16 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_128M16 kmnusa arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_NUSA kmsuv31 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_SUV31 mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 83bb7aa..2b5f389 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -51,6 +51,16 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ #define CONFIG_KM_FPGA_CONFIG +/* KM_KIRKWOOD_128M16 */ +#elif defined(CONFIG_KM_KIRKWOOD_128M16) +#define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" +#define CONFIG_HOSTNAME km_kirkwood_128m16 +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg +#define CONFIG_KM_DISABLE_PCIE +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ + /* KM_NUSA */ #elif defined(CONFIG_KM_NUSA) #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/