From patchwork Tue Jul 2 21:17:51 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: DrEagle X-Patchwork-Id: 256514 X-Patchwork-Delegate: sr@denx.de Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 3B9722C0095 for ; Wed, 3 Jul 2013 07:26:48 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id D0D714A026; Tue, 2 Jul 2013 23:26:46 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id D3IzzvMqOpYI; Tue, 2 Jul 2013 23:26:46 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id CEA5F4A027; Tue, 2 Jul 2013 23:26:41 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 93D704A027 for ; Tue, 2 Jul 2013 23:26:38 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id d8gDHUeO8-+C for ; Tue, 2 Jul 2013 23:26:33 +0200 (CEST) X-Greylist: delayed 448 seconds by postgrey-1.27 at theia; Tue, 02 Jul 2013 23:26:28 CEST X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from milenium.gk2.net (unknown [88.178.80.34]) by theia.denx.de (Postfix) with ESMTP id 6809B4A026 for ; Tue, 2 Jul 2013 23:26:28 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by milenium.gk2.net (Postfix) with ESMTP id 1578C110C21D; Tue, 2 Jul 2013 23:18:59 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at milenium.gk2.net Received: from milenium.gk2.net ([127.0.0.1]) by localhost (milenium.gk2.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id qDsdBjAwdUSA; Tue, 2 Jul 2013 23:17:56 +0200 (CEST) Received: from [192.168.1.101] (astree.gk2.net [109.190.23.135]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: gek@milenium.gk2.net) by milenium.gk2.net (Postfix) with ESMTPSA id 2C581110C1D3; Tue, 2 Jul 2013 23:17:54 +0200 (CEST) Message-ID: <51D3437F.9040000@doukki.net> Date: Tue, 02 Jul 2013 23:17:51 +0200 From: DrEagle User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130623 Thunderbird/17.0.7 MIME-Version: 1.0 To: "u-boot@lists.denx.de" X-Enigmail-Version: 1.6a1pre Cc: Lior Amsalem , Maen Suleiman Subject: [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review) X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de Hi, I have started to rework all the MVSDIO driver, and some more enhancements, to make a cool updated and workable SheevaPlug. I have take the v2013.04 denx uBoot to base my patchs. If you can take a look inside and give me needed feedback. I want to precise that I do not easily practice GIT features. Regards, Gérald arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 58 ++++ arch/arm/include/asm/arch-kirkwood/config.h | 2 + arch/arm/include/asm/arch-kirkwood/cpu.h | 2 + arch/arm/include/asm/arch-kirkwood/kirkwood.h | 24 ++ arch/arm/include/asm/arch-kirkwood/kw88f6282.h | 39 +++ board/Marvell/sheevaplug/sheevaplug.c | 11 + drivers/mmc/Makefile | 1 + drivers/mmc/mrvl_mmc.c | 446 +++++++++++++++++++++++++ include/configs/mv-common.h | 19 +- include/configs/sheevaplug.h | 91 +++-- include/mmc.h | 2 +- include/mrvl_mmc.h | 266 +++++++++++++++ 12 files changed, 935 insertions(+), 26 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index fba5e01..720fccf 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -350,6 +350,64 @@ int arch_cpu_init(void) } #endif /* CONFIG_ARCH_CPU_INIT */ +/***************************************************************************** + * General + ****************************************************************************/ +#if defined(CONFIG_ARCH_DEV_ID) + +void kirkwood_pcie_id(u32 *dev, u32 *rev) +{ + *dev = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff; + *rev = readl(KW_REG_PCIE_REVID) & 0xff; +} + +/* + * Identify device ID and revision. + */ +char *kirkwood_id(void) +{ + u32 dev, rev; + + kirkwood_pcie_id(&dev, &rev); + + if (dev == MV88F6281_DEV_ID) { + if (rev == MV88F6281_REV_Z0) + return "MV88F6281-Z0"; + else if (rev == MV88F6281_REV_A0) + return "MV88F6281-A0"; + else if (rev == MV88F6281_REV_A1) + return "MV88F6281-A1"; + else + return "MV88F6281-Rev-Unsupported"; + } else if (dev == MV88F6192_DEV_ID) { + if (rev == MV88F6192_REV_Z0) + return "MV88F6192-Z0"; + else if (rev == MV88F6192_REV_A0) + return "MV88F6192-A0"; + else if (rev == MV88F6192_REV_A1) + return "MV88F6192-A1"; + else + return "MV88F6192-Rev-Unsupported"; + } else if (dev == MV88F6180_DEV_ID) { + if (rev == MV88F6180_REV_A0) + return "MV88F6180-Rev-A0"; + else if (rev == MV88F6180_REV_A1) + return "MV88F6180-Rev-A1"; + else + return "MV88F6180-Rev-Unsupported"; + } else if (dev == MV88F6282_DEV_ID) { + if (rev == MV88F6282_REV_A0) + return "MV88F6282-Rev-A0"; + else if (rev == MV88F6282_REV_A1) + return "MV88F6282-Rev-A1"; + else + return "MV88F6282-Rev-Unsupported"; + } else { + return "Device-Unknown"; + } +} +#endif /* CONFIG_ARCH_DEV_ID */ + /* * SOC specific misc init */ diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h index a9499b7..210cc3f 100644 --- a/arch/arm/include/asm/arch-kirkwood/config.h +++ b/arch/arm/include/asm/arch-kirkwood/config.h @@ -35,6 +35,8 @@ #include #elif defined (CONFIG_KW88F6192) #include +#elif defined (CONFIG_KW88F6182) +#include #else #error "SOC Name not defined" #endif /* CONFIG_KW88F6281 */ diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 009a6bb..34957a2 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -167,5 +167,7 @@ int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15, unsigned int mpp32_39, unsigned int mpp40_47, unsigned int mpp48_55); unsigned int kw_winctrl_calcsize(unsigned int sizeval); +void kirkwood_pcie_id(u32 *dev, u32 *rev); +char *kirkwood_id(void); #endif /* __ASSEMBLY__ */ #endif /* _KWCPU_H */ diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h index 47771d5..c696dc4 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h @@ -55,6 +55,7 @@ #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) #define KW_EGIGA1_BASE (KW_REGISTER(0x76000)) #define KW_SATA_BASE (KW_REGISTER(0x80000)) +#define KW_SDIO_BASE (KW_REGISTER(0x90000)) /* Kirkwood Sata controller has two ports */ #define KW_SATA_PORT0_OFFSET 0x2000 @@ -77,10 +78,33 @@ #define MVCPU_WIN_ENABLE KWCPU_WIN_ENABLE #define MVCPU_WIN_DISABLE KWCPU_WIN_DISABLE +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 +#define MV88F6281_REV_A1 3 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 +#define MV88F6192_REV_A1 3 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 +#define MV88F6180_REV_A1 3 + +#define MV88F6282_DEV_ID 0x6282 +#define MV88F6282_REV_A0 0 +#define MV88F6282_REV_A1 1 + #if defined (CONFIG_KW88F6281) #include #elif defined (CONFIG_KW88F6192) #include +#elif defined (CONFIG_KW88F6182) +#include #else #error "SOC Name not defined" #endif /* CONFIG_KW88F6281 */ diff --git a/arch/arm/include/asm/arch-kirkwood/kw88f6282.h b/arch/arm/include/asm/arch-kirkwood/kw88f6282.h new file mode 100644 index 0000000..22d10f1 --- /dev/null +++ b/arch/arm/include/asm/arch-kirkwood/kw88f6282.h @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * Header file for Feroceon CPU core 88FR131 Based KW88F6281 SOC. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _ASM_ARCH_KW88F6281_H +#define _ASM_ARCH_KW88F6281_H + +/* SOC specific definitions */ +#define KW88F6281_REGS_PHYS_BASE 0xf1000000 +#define KW_REGS_PHY_BASE KW88F6281_REGS_PHYS_BASE + +/* TCLK Core Clock definition */ +#ifndef CONFIG_SYS_TCLK +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ +#endif + +#endif /* _ASM_ARCH_KW88F6281_H */ diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c index 16efe64..2bd2568 100644 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ b/board/Marvell/sheevaplug/sheevaplug.c @@ -28,6 +28,9 @@ #include #include #include "sheevaplug.h" +#ifdef CONFIG_MRVL_MMC +#include +#endif /* CONFIG_MRVL_MMC */ DECLARE_GLOBAL_DATA_PTR; @@ -147,3 +150,11 @@ void reset_phy(void) printf("88E1116 Initialized on %s\n", name); } #endif /* CONFIG_RESET_PHY_R */ + +#ifdef CONFIG_MRVL_MMC +int board_mmc_init(bd_t *bis) +{ + mrvl_mmc_initialize(bis); + return 0; +} +#endif /* CONFIG_MRVL_MMC */ diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 1d6faa2..2a2745d 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o +COBJS-$(CONFIG_MRVL_MMC) += mrvl_mmc.o COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o diff --git a/drivers/mmc/mrvl_mmc.c b/drivers/mmc/mrvl_mmc.c new file mode 100644 index 0000000..b0571cf --- /dev/null +++ b/drivers/mmc/mrvl_mmc.c @@ -0,0 +1,446 @@ +/* + * Driver for Marvell SDIO/MMC controller + * + * (C) Copyright 2012 + * Marvell Semiconductor + * Written-by: Gérald Kerma + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "mvsdio" + +static int maxfreq = MRVL_MMC_CLOCKRATE_MAX; + +#define mvsd_write(offs, val) writel(val, CONFIG_SYS_MMC_BASE + (offs)) +#define mvsd_read(offs) readl(CONFIG_SYS_MMC_BASE + (offs)) + +#define MRVL_MMC_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) + +static int mrvl_mmc_setup_data(struct mmc_data *data) +{ + u32 ctrl_reg; + +#ifdef DEBUG + printf("%s, data %s : blocks=%d blksz=%d\n", DRIVER_NAME, + (data->flags & MMC_DATA_READ) ? "read" : "write", + data->blocks, data->blocksize); +#endif + + /* default to maximum timeout */ + ctrl_reg = mvsd_read(SDIO_HOST_CTRL); + ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); + mvsd_write(SDIO_HOST_CTRL, ctrl_reg); + + if (data->flags & MMC_DATA_READ) { + mvsd_write(SDIO_SYS_ADDR_LOW,(u32)data->dest & 0xffff); + mvsd_write(SDIO_SYS_ADDR_HI,(u32)data->dest >> 16); + } else { + mvsd_write(SDIO_SYS_ADDR_LOW,(u32)data->src & 0xffff); + mvsd_write(SDIO_SYS_ADDR_HI,(u32)data->src >> 16); + } + + mvsd_write(SDIO_BLK_COUNT, data->blocks); + mvsd_write(SDIO_BLK_SIZE, data->blocksize); + + return 0; +} + +static int mrvl_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +{ + int timeout = 10; + ushort waittype = 0; + ushort resptype = 0; + ushort xfertype = 0; + ushort resp_indx = 0; + +#ifdef CONFIG_MMC_DEBUG + printf("cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n", cmd->cmdidx, cmd->resp_type, cmd->cmdarg); +#endif + + udelay(10*1000); + +#ifdef CONFIG_MMC_DEBUG + printf("%s: cmd %d (hw state 0x%04x)\n", DRIVER_NAME, + cmd->cmdidx, mvsd_read(SDIO_HW_STATE)); +#endif + + /* Checking if card is busy */ + while ((mvsd_read(SDIO_HW_STATE) & CARD_BUSY)) { + if (timeout == 0) { + printf("%s: card busy!\n", DRIVER_NAME); + return -1; + } + timeout--; + udelay(1000); + } + + /* Set up for a data transfer if we have one */ + if (data) { + int err = mrvl_mmc_setup_data(data); + if (err) + return err; + } + + resptype = SDIO_CMD_INDEX(cmd->cmdidx); + + /* Analyzing resptype/xfertype/waittype for the command */ + if (cmd->resp_type & MMC_RSP_BUSY) + resptype |= SDIO_CMD_RSP_48BUSY; + else if (cmd->resp_type & MMC_RSP_136) + resptype |= SDIO_CMD_RSP_136; + else if (cmd->resp_type & MMC_RSP_PRESENT) + resptype |= SDIO_CMD_RSP_48; + else + resptype |= SDIO_CMD_RSP_NONE; + + if (cmd->resp_type & MMC_RSP_CRC) + resptype |= SDIO_CMD_CHECK_CMDCRC; + + if (cmd->resp_type & MMC_RSP_OPCODE) + resptype |= SDIO_CMD_INDX_CHECK; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + resptype |= SDIO_UNEXPECTED_RESP; + waittype |= SDIO_NOR_UNEXP_RSP; + } + + if (data) { + resptype |= SDIO_CMD_DATA_PRESENT | SDIO_CMD_CHECK_DATACRC16; + xfertype |= SDIO_XFER_MODE_HW_WR_DATA_EN; + if (data->flags & MMC_DATA_READ) { + xfertype |= SDIO_XFER_MODE_TO_HOST; + waittype = SDIO_NOR_DMA_INI; + } else + waittype |= SDIO_NOR_XFER_DONE; + } else { + waittype |= SDIO_NOR_CMD_DONE; + } + + /* Setting cmd arguments */ + mvsd_write(SDIO_ARG_LOW, cmd->cmdarg & 0xffff); + mvsd_write(SDIO_ARG_HI, cmd->cmdarg >> 16 ); + + /* Setting Xfer mode */ + mvsd_write(SDIO_XFER_MODE, xfertype); + + mvsd_write(SDIO_NOR_INTR_STATUS, ~SDIO_NOR_CARD_INT); + mvsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); + + /* Sending command */ + mvsd_write(SDIO_CMD, resptype); +/* + mvsd_write(SDIO_CMD, MRVL_MMC_MAKE_CMD(cmd->cmdidx, resptype)); +*/ + + mvsd_write(SDIO_NOR_INTR_EN, SDIO_POLL_MASK); + mvsd_write(SDIO_ERR_INTR_EN, SDIO_POLL_MASK); + + /* Waiting for completion */ + timeout = 1000000; + + while (!((mvsd_read(SDIO_NOR_INTR_STATUS)) & waittype)) { + if (mvsd_read(SDIO_NOR_INTR_STATUS) & SDIO_NOR_ERROR) { +#ifdef DEBUG + printf("%s: mrvl_mmc_send_cmd: error! cmdidx : %d, err reg: %04x\n", DRIVER_NAME, cmd->cmdidx, mvsd_read(SDIO_ERR_INTR_STATUS)); +#endif + if (mvsd_read(SDIO_ERR_INTR_STATUS) & (SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT)) + return TIMEOUT; + return COMM_ERR; + } + + timeout--; + udelay(1); + if (timeout <= 0) { + printf("%s: command timed out\n", DRIVER_NAME); + return TIMEOUT; + } + } + + /* Handling response */ + if (cmd->resp_type & MMC_RSP_136) { + uint response[8]; + for (resp_indx = 0; resp_indx < 8; resp_indx++) + response[resp_indx] = mvsd_read(SDIO_RSP(resp_indx)); + + cmd->response[0] = ((response[0] & 0x03ff) << 22) | + ((response[1] & 0xffff) << 6) | + ((response[2] & 0xfc00) >> 10); + cmd->response[1] = ((response[2] & 0x03ff) << 22) | + ((response[3] & 0xffff) << 6) | + ((response[4] & 0xfc00) >> 10); + cmd->response[2] = ((response[4] & 0x03ff) << 22) | + ((response[5] & 0xffff) << 6) | + ((response[6] & 0xfc00) >> 10); + cmd->response[3] = ((response[6] & 0x03ff) << 22) | + ((response[7] & 0x3fff) << 8); + } else if (cmd->resp_type & MMC_RSP_PRESENT) { + uint response[3]; + for (resp_indx = 0; resp_indx < 3; resp_indx++) + response[resp_indx] = mvsd_read(SDIO_RSP(resp_indx)); + + cmd->response[0] = ((response[2] & 0x003f) << (8 - 8)) | + ((response[1] & 0xffff) << (14 - 8)) | + ((response[0] & 0x03ff) << (30 - 8)); + cmd->response[1] = ((response[0] & 0xfc00) >> 10); + cmd->response[2] = 0; + cmd->response[3] = 0; + } + +#ifdef CONFIG_MMC_DEBUG + printf("%s: resp[0x%x] ", DRIVER_NAME, cmd->resp_type); + printf("[0x%x] ", cmd->response[0]); + printf("[0x%x] ", cmd->response[1]); + printf("[0x%x] ", cmd->response[2]); + printf("[0x%x] ", cmd->response[3]); + printf("\n"); +#endif + + return 0; +} + +static void mvsd_power_up(void) +{ +#ifdef DEBUG + printf("%s: power up\n", DRIVER_NAME); +#endif + /* disable interrupts */ + mvsd_write(SDIO_NOR_INTR_EN, 0); + mvsd_write(SDIO_ERR_INTR_EN, 0); + + /* SW reset */ + mvsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); + + mvsd_write(SDIO_XFER_MODE, 0); + + /* enable status */ + mvsd_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); + mvsd_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); + + /* enable interrupts status */ + mvsd_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK); + mvsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); +} + +static void mvsd_power_down(void) +{ +#ifdef DEBUG + printf("%s: power down\n", DRIVER_NAME); +#endif + /* disable interrupts */ + mvsd_write(SDIO_NOR_INTR_EN, 0); + mvsd_write(SDIO_ERR_INTR_EN, 0); + + /* SW reset */ + mvsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); + + mvsd_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK); + + /* disable status */ + mvsd_write(SDIO_NOR_STATUS_EN, 0); + mvsd_write(SDIO_ERR_STATUS_EN, 0); + + /* enable interrupts status */ + mvsd_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK); + mvsd_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); +} + +static u32 mrvl_mmc_get_base_clock(void) +{ + u32 devid; + u32 revid; + + if (0) { + kirkwood_pcie_id(&devid, &revid); + +#ifdef DEBUG + printf("%s: board devid[0x%x] devid[0x%x]\n", DRIVER_NAME, devid, revid); +#endif + + if (revid == 0 && devid != MV88F6282_DEV_ID){ + /* catch all Kirkwood Z0's */ +#ifdef DEBUG + printf("%s: Kirkwood Z0's base clock = %d\n", DRIVER_NAME, MRVL_MMC_BASE_FAST_CLK_100); +#endif + return MRVL_MMC_BASE_FAST_CLK_100; + }else{ +#ifdef DEBUG + printf("%s: base clock = %d\n", DRIVER_NAME, MRVL_MMC_BASE_FAST_CLK_200); +#endif + return MRVL_MMC_BASE_FAST_CLK_200; + } + } + return MRVL_MMC_BASE_FAST_CLOCK; +} + +static void mrvl_mmc_set_clk(unsigned int clock) +{ + unsigned int m; + + if (clock == 0){ +#ifdef DEBUG + printf("%s: clock off\n", DRIVER_NAME); +#endif + mvsd_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK); + mvsd_write(SDIO_CLK_DIV, MRVL_MMC_BASE_DIV_MAX); + }else{ + m = MRVL_MMC_BASE_FAST_CLOCK/(2*clock) - 1; + if (m > MRVL_MMC_BASE_DIV_MAX) + m = MRVL_MMC_BASE_DIV_MAX; +#ifdef DEBUG + printf("%s: mrvl_mmc_set_clk: base = %d dividor = 0x%x clock=%d\n", DRIVER_NAME, mrvl_mmc_get_base_clock(), m, clock); +#endif + mvsd_write(SDIO_CLK_DIV, m & MRVL_MMC_BASE_DIV_MAX); + } + udelay(10*1000); +} + +static void mrvl_mmc_set_bus(unsigned int bus) +{ + u32 ctrl_reg = 0; + + ctrl_reg = mvsd_read(SDIO_HOST_CTRL); + ctrl_reg &= ~SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; + + switch (bus) { + case 4: + ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; + break; + case 1: + default: + ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_1_BIT; + } + /* default transfer mode */ + ctrl_reg |= SDIO_HOST_CTRL_BIG_ENDIAN; + ctrl_reg &= ~SDIO_HOST_CTRL_LSB_FIRST; + + /* default to maximum timeout */ + ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); + + ctrl_reg |= SDIO_HOST_CTRL_PUSH_PULL_EN; + + ctrl_reg |= SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY; + + /* + * The HI_SPEED_EN bit is causing trouble with many (but not all) + * high speed SD, SDHC and SDIO cards. Not enabling that bit + * makes all cards work. So let's just ignore that bit for now + * and revisit this issue if problems for not enabling this bit + * are ever reported. + */ +#if 0 + if (ios->timing == MMC_TIMING_MMC_HS || + ios->timing == MMC_TIMING_SD_HS) + ctrl_reg |= SDIO_HOST_CTRL_HI_SPEED_EN; +#endif + +#ifdef DEBUG + printf("%s: ctrl 0x%04x: %s %s %s\n", DRIVER_NAME, ctrl_reg, + (ctrl_reg & SDIO_HOST_CTRL_PUSH_PULL_EN) ? + "push-pull" : "open-drain", + (ctrl_reg & SDIO_HOST_CTRL_DATA_WIDTH_4_BITS) ? + "4bit-width" : "1bit-width", + (ctrl_reg & SDIO_HOST_CTRL_HI_SPEED_EN) ? + "high-speed" : ""); +#endif + + mvsd_write(SDIO_HOST_CTRL, ctrl_reg); + udelay(10*1000); +} + +static void mrvl_mmc_set_ios(struct mmc *mmc) +{ +#ifdef DEBUG + printf("%s: bus[%d] clock[%d]\n", DRIVER_NAME, mmc->bus_width, mmc->clock); +#endif + mrvl_mmc_set_bus(mmc->bus_width); + mrvl_mmc_set_clk(mmc->clock); +} + +static int mrvl_mmc_init(struct mmc *mmc) +{ +#ifdef DEBUG + printf("%s: mrvl_mmc_init\n", DRIVER_NAME); +#endif + +/* + * Setting host parameters + * Initial Host Ctrl : Timeout : max , Normal Speed mode, 4-bit data mode + * Big Endian, SD memory Card, Push_pull CMD Line + */ + mvsd_write(SDIO_HOST_CTRL, + SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX) | + SDIO_HOST_CTRL_DATA_WIDTH_4_BITS | + SDIO_HOST_CTRL_BIG_ENDIAN | + SDIO_HOST_CTRL_PUSH_PULL_EN | + SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY ); + + mvsd_write(SDIO_CLK_CTRL, 0); + + /* enable status */ + mvsd_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); + mvsd_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); + + /* disable interrupts */ + mvsd_write(SDIO_NOR_INTR_EN, 0); + mvsd_write(SDIO_ERR_INTR_EN, 0); + + /* SW reset */ + mvsd_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); + + udelay(10*1000); + return 0; +} + +int mrvl_mmc_initialize(bd_t *bis) +{ + struct mmc *mmc = NULL; + +#ifdef DEBUG + printf("%s: %s base_clock = %d\n", DRIVER_NAME, kirkwood_id(), mrvl_mmc_get_base_clock()); +#endif + mmc = malloc(sizeof(struct mmc)); + if (!mmc) + return -1; + + sprintf(mmc->name, DRIVER_NAME); + mmc->send_cmd = mrvl_mmc_send_cmd; + mmc->set_ios = mrvl_mmc_set_ios; + mmc->init = mrvl_mmc_init; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS; + + mmc->f_min = MRVL_MMC_BASE_FAST_CLOCK/MRVL_MMC_BASE_DIV_MAX; + mmc->f_max = maxfreq; + + mmc_register(mmc); + + return 0; +} + diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 405a842..e917e6f 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -72,7 +72,10 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200,230400, 460800, 921600 } -/* auto boot */ +/* + * Miscellaneous configurable options + */ +#define CONFIG_ENV_OVERWRITE #define CONFIG_BOOTDELAY 3 /* default enable autoboot */ /* @@ -98,6 +101,7 @@ * Other required minimal configurations */ #define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ @@ -142,6 +146,19 @@ #endif /* + * SATA driver configuration + */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_DOS_PARTITION +#define CONFIG_MVSATA_IDE_USE_PORT0 +#define CONFIG_MVSATA_IDE_USE_PORT1 +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_CMD_IDE */ + +/* * Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 83dd8ff..270fd56 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -28,7 +28,8 @@ /* * Version number information */ -#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" + +#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug - eSATA - SD/MMC" /* * High Level Configuration Options (easy to change) @@ -39,17 +40,24 @@ #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_ARCH_DEV_ID 1 + /* * Commands configuration */ + #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_SYS_MVFS #include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE #define CONFIG_CMD_MII +#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -57,6 +65,11 @@ #include "mv-common.h" /* + * Miscellaneous configurable options + */ +#undef CONFIG_CONSOLE_INFO_QUIET + +/* * Environment variables configurations */ #ifdef CONFIG_CMD_NAND @@ -65,29 +78,56 @@ #else #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ #endif + /* * max 4k env size is enough, but in case of nand * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x80000 +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" +#define CONFIG_BOOTCOMMAND \ + "run x_bootcmd; run z_bootstrap; reset;" -#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ - "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:" \ + "768k(uboot),256k(uboot_env)," \ + "11m@1m(kernel),-@12m(rootfs)\0" -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200n8\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kerneladdr=0x00800000\0" \ + "kernelfile=/boot/uImage.bin\0" \ + "scriptaddr=0x00800000\0" \ + "scriptfile=/boot/boot.scr\0" \ + "x_bootargs=console=ttyS0,115200n8 "CONFIG_MTDPARTS \ + "x_bootargs_root=root=LABEL=plug-rootfs rw rootwait panic=5\0" \ + "x_bootcmd=${x_bootcmd_kernel}; setenv bootargs ${x_bootargs}" \ + " ${x_bootargs_root}; run z_bootinit;\0" \ + "x_bootcmd_kernel=echo ====== BootStrap start ======\0" \ + "x_bootstrap_scr=for device in \"mmc usb ide\"; do for fs in" \ + " \"ext2 fat\"; do setenv loadcmd \"${fs}load ${device} 0:1\";" \ + " if ${loadcmd} ${scriptaddr} ${scriptfile}; then;" \ + " run z_bootscr; fi; done; done;\0" \ + "x_bootstrap_cmd=for device in \"mmc usb ide\"; do for fs in" \ + " \"ext2 fat\"; do setenv loadcmd \"${fs}load ${device} 0:1\";" \ + " if ${loadcmd} ${kerneladdr} ${kernelfile}; then;" \ + " run z_bootcmd; fi; done; done;\0" \ + "x_bootcmd_mtd=nand read.e ${kerneladdr} kernel 0x00b00000;\0" \ + "z_bootinit=mmc rescan; usb reset; ide reset;\0" \ + "z_bootcmd=if imi ${kerneladdr}; then; bootm ${kerneladdr};" \ + " else; echo --- next bootcmd device try ---; fi;\0" \ + "z_bootscr=if imi ${scriptaddr}; then; autoscr ${scriptaddr};" \ + " else; echo --- next bootscr device try ---; fi;\0" \ + "z_bootstrap=run z_bootinit; run x_bootstrap_scr;" \ + " run x_bootstrap_cmd; run x_bootcmd_mtd; run z_bootfail;\0" \ + "z_bootfail=echo ====== BootStrap end ======\0" /* * Ethernet Driver configuration @@ -98,17 +138,20 @@ #endif /* CONFIG_CMD_NET */ /* - * File system + * RTC driver configuration + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +/* + * SDIO/MMC Card Configuration */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MRVL_MMC +#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE +#endif /* CONFIG_CMD_MMC */ #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/mmc.h b/include/mmc.h index f0d4820..b103ff4 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -52,7 +52,7 @@ #define MMC_MODE_4BIT 0x100 #define MMC_MODE_8BIT 0x200 #define MMC_MODE_SPI 0x400 -#define MMC_MODE_HC 0x800 +#define MMC_MODE_HC 0x800 #define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) #define MMC_MODE_WIDTH_BITS_SHIFT 8 diff --git a/include/mrvl_mmc.h b/include/mrvl_mmc.h new file mode 100644 index 0000000..b5fa91c --- /dev/null +++ b/include/mrvl_mmc.h @@ -0,0 +1,266 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * (C) Copyright 2012 + * Marvell Semiconductor + * Written-by: Gérald Kerma + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MRVL_MMC_H__ +#define __MRVL_MMC_H__ + +/* + * Clock rates + */ + +#define MRVL_MMC_CLOCKRATE_MAX 50000000 +#define MRVL_MMC_BASE_DIV_MAX 0x7ff +#define MRVL_MMC_BASE_FAST_CLOCK CONFIG_SYS_TCLK +#define MRVL_MMC_BASE_FAST_CLK_100 100000000 +#define MRVL_MMC_BASE_FAST_CLK_200 200000000 + +/* SDIO register */ +#define SDIO_SYS_ADDR_LOW 0x000 +#define SDIO_SYS_ADDR_HI 0x004 +#define SDIO_BLK_SIZE 0x008 +#define SDIO_BLK_COUNT 0x00c +#define SDIO_ARG_LOW 0x010 +#define SDIO_ARG_HI 0x014 +#define SDIO_XFER_MODE 0x018 +#define SDIO_CMD 0x01c +#define SDIO_RSP(i) (0x020 + ((i)<<2)) +#define SDIO_RSP0 0x020 +#define SDIO_RSP1 0x024 +#define SDIO_RSP2 0x028 +#define SDIO_RSP3 0x02c +#define SDIO_RSP4 0x030 +#define SDIO_RSP5 0x034 +#define SDIO_RSP6 0x038 +#define SDIO_RSP7 0x03c +#define SDIO_BUF_DATA_PORT 0x040 +#define SDIO_RSVED 0x044 +#define SDIO_HW_STATE 0x048 +#define SDIO_PRESENT_STATE0 0x048 +#define SDIO_PRESENT_STATE1 0x04c +#define SDIO_HOST_CTRL 0x050 +#define SDIO_BLK_GAP_CTRL 0x054 +#define SDIO_CLK_CTRL 0x058 +#define SDIO_SW_RESET 0x05c +#define SDIO_NOR_INTR_STATUS 0x060 +#define SDIO_ERR_INTR_STATUS 0x064 +#define SDIO_NOR_STATUS_EN 0x068 +#define SDIO_ERR_STATUS_EN 0x06c +#define SDIO_NOR_INTR_EN 0x070 +#define SDIO_ERR_INTR_EN 0x074 +#define SDIO_AUTOCMD12_ERR_STATUS 0x078 +#define SDIO_CURR_BYTE_LEFT 0x07c +#define SDIO_CURR_BLK_LEFT 0x080 +#define SDIO_AUTOCMD12_ARG_LOW 0x084 +#define SDIO_AUTOCMD12_ARG_HI 0x088 +#define SDIO_AUTOCMD12_INDEX 0x08c +#define SDIO_AUTO_RSP(i) (0x090 + ((i)<<2)) +#define SDIO_AUTO_RSP0 0x090 +#define SDIO_AUTO_RSP1 0x094 +#define SDIO_AUTO_RSP2 0x098 +#define SDIO_CLK_DIV 0x128 + +#define WINDOW_CTRL(i) (0x108 + ((i) << 3)) +#define WINDOW_BASE(i) (0x10c + ((i) << 3)) + +/* SDIO_PRESENT_STATE */ +#define CARD_BUSY (1 << 1) +#define CMD_INHIBIT (1 << 0) +#define CMD_TXACTIVE (1 << 8) +#define CMD_RXACTIVE (1 << 9) +#define CMD_AUTOCMD12ACTIVE (1 << 14) +#define CMD_BUS_BUSY (CMD_AUTOCMD12ACTIVE | \ + CMD_RXACTIVE | \ + CMD_TXACTIVE | \ + CMD_INHIBIT | \ + CARD_BUSY) + +/* + * SDIO_CMD + */ + +#define SDIO_CMD_RSP_NONE (0 << 0) +#define SDIO_CMD_RSP_136 (1 << 0) +#define SDIO_CMD_RSP_48 (2 << 0) +#define SDIO_CMD_RSP_48BUSY (3 << 0) + +#define SDIO_CMD_CHECK_DATACRC16 (1 << 2) +#define SDIO_CMD_CHECK_CMDCRC (1 << 3) +#define SDIO_CMD_INDX_CHECK (1 << 4) +#define SDIO_CMD_DATA_PRESENT (1 << 5) +#define SDIO_UNEXPECTED_RESP (1 << 7) + +#define SDIO_CMD_INDEX(x) ((x) << 8) + +/* + * SDIO_XFER_MODE + */ + +#define SDIO_XFER_MODE_STOP_CLK (1 << 5) +#define SDIO_XFER_MODE_HW_WR_DATA_EN (1 << 1) +#define SDIO_XFER_MODE_AUTO_CMD12 (1 << 2) +#define SDIO_XFER_MODE_INT_CHK_EN (1 << 3) +#define SDIO_XFER_MODE_TO_HOST (1 << 4) +#define SDIO_XFER_MODE_DMA (0 << 6) + +/* + * SDIO_HOST_CTRL + */ + +#define SDIO_HOST_CTRL_PUSH_PULL_EN (1 << 0) + +#define SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY (0 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_ONLY (1 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO (2 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_MMC (3 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_MASK (3 << 1) + +#define SDIO_HOST_CTRL_BIG_ENDIAN (1 << 3) +#define SDIO_HOST_CTRL_LSB_FIRST (1 << 4) +#define SDIO_HOST_CTRL_DATA_WIDTH_1_BIT (0 << 9) +#define SDIO_HOST_CTRL_DATA_WIDTH_4_BITS (1 << 9) +#define SDIO_HOST_CTRL_HI_SPEED_EN (1 << 10) + +#define SDIO_HOST_CTRL_TMOUT_MAX 0xf +#define SDIO_HOST_CTRL_TMOUT_MASK (0xf << 11) +#define SDIO_HOST_CTRL_TMOUT(x) ((x) << 11) +#define SDIO_HOST_CTRL_TMOUT_EN (1 << 15) + +/* + * SDIO_SW_RESET + */ + +#define SDIO_SW_RESET_NOW (1 << 8) + +/* + * Normal interrupt status bits + */ + +#define SDIO_NOR_ERROR (1 << 15) +#define SDIO_NOR_UNEXP_RSP (1 << 14) +#define SDIO_NOR_AUTOCMD12_DONE (1 << 13) +#define SDIO_NOR_SUSPEND_ON (1 << 12) +#define SDIO_NOR_LMB_FF_8W_AVAIL (1 << 11) +#define SDIO_NOR_LMB_FF_8W_FILLED (1 << 10) +#define SDIO_NOR_READ_WAIT_ON (1 << 9) +#define SDIO_NOR_CARD_INT (1 << 8) +#define SDIO_NOR_READ_READY (1 << 5) +#define SDIO_NOR_WRITE_READY (1 << 4) +#define SDIO_NOR_DMA_INI (1 << 3) +#define SDIO_NOR_BLK_GAP_EVT (1 << 2) +#define SDIO_NOR_XFER_DONE (1 << 1) +#define SDIO_NOR_CMD_DONE (1 << 0) + +/* + * Error status bits + */ + +#define SDIO_ERR_CRC_STATUS (1 << 14) +#define SDIO_ERR_CRC_STARTBIT (1 << 13) +#define SDIO_ERR_CRC_ENDBIT (1 << 12) +#define SDIO_ERR_RESP_TBIT (1 << 11) +#define SDIO_ERR_XFER_SIZE (1 << 10) +#define SDIO_ERR_CMD_STARTBIT (1 << 9) +#define SDIO_ERR_AUTOCMD12 (1 << 8) +#define SDIO_ERR_DATA_ENDBIT (1 << 6) +#define SDIO_ERR_DATA_CRC (1 << 5) +#define SDIO_ERR_DATA_TIMEOUT (1 << 4) +#define SDIO_ERR_CMD_INDEX (1 << 3) +#define SDIO_ERR_CMD_ENDBIT (1 << 2) +#define SDIO_ERR_CMD_CRC (1 << 1) +#define SDIO_ERR_CMD_TIMEOUT (1 << 0) +#define SDIO_POLL_MASK 0xffff /* enable all for polling */ + +#define MMC_BLOCK_SIZE 512 + +/* + * CMD12 error status bits + */ + +#define SDIO_AUTOCMD12_ERR_NOTEXE (1 << 0) +#define SDIO_AUTOCMD12_ERR_TIMEOUT (1 << 1) +#define SDIO_AUTOCMD12_ERR_CRC (1 << 2) +#define SDIO_AUTOCMD12_ERR_ENDBIT (1 << 3) +#define SDIO_AUTOCMD12_ERR_INDEX (1 << 4) +#define SDIO_AUTOCMD12_ERR_RESP_T_BIT (1 << 5) +#define SDIO_AUTOCMD12_ERR_RESP_STARTBIT (1 << 6) + +#define MMC_RSP_PRESENT (1 << 0) +#define MMC_RSP_136 (1 << 1) /* 136 bit response */ +#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ +#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ +#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ + +#define MMC_BUSMODE_OPENDRAIN 1 +#define MMC_BUSMODE_PUSHPULL 2 + +#define MMC_BUS_WIDTH_1 0 +#define MMC_BUS_WIDTH_4 2 +#define MMC_BUS_WIDTH_8 3 + +#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ +#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ +#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */ +#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */ +#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ +#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ +#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ + +#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ +#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ +#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */ + /* DDR mode at 1.8V */ +#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ + /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ +#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */ +#define MMC_CAP_UHS_SDR12 (1 << 15) /* Host supports UHS SDR12 mode */ +#define MMC_CAP_UHS_SDR25 (1 << 16) /* Host supports UHS SDR25 mode */ +#define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */ +#define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */ +#define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */ +#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ +#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ +#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ +#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ +#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ + +/* + * Functions prototypes + */ + +static int mrvl_mmc_setup_data(struct mmc_data *data); +static int mrvl_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data); +static void mvsd_power_up(void); +static void mvsd_power_down(void); +static u32 mrvl_mmc_get_base_clock(void); +static void mrvl_mmc_set_clk(uint clock); +static void mrvl_mmc_set_bus(unsigned int bus); +static void mrvl_mmc_set_ios(struct mmc *mmc); +static int mrvl_mmc_init(struct mmc *mmc); +int mrvl_mmc_initialize(bd_t *bis); + +#endif /* __MRVL_MMC_H__ */