From patchwork Mon Jul 1 09:51:50 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: pekon gupta X-Patchwork-Id: 256042 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from casper.infradead.org (casper.infradead.org [IPv6:2001:770:15f::2]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id F37E52C00A1 for ; Mon, 1 Jul 2013 19:53:15 +1000 (EST) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Utamw-0005ft-IK; Mon, 01 Jul 2013 09:52:51 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Utamr-0000K3-U7; Mon, 01 Jul 2013 09:52:45 +0000 Received: from devils.ext.ti.com ([198.47.26.153]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Utamm-0000Hd-S8 for linux-mtd@lists.infradead.org; Mon, 01 Jul 2013 09:52:44 +0000 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id r619qBfs028344; Mon, 1 Jul 2013 04:52:11 -0500 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id r619qA3M003145; Mon, 1 Jul 2013 04:52:11 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.2.342.3; Mon, 1 Jul 2013 04:52:10 -0500 Received: from psplinux064.india.ti.com (psplinux064.india.ti.com [10.24.100.118]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r619q3Wi030018; Mon, 1 Jul 2013 04:52:07 -0500 From: Pekon Gupta To: , , Subject: [PATCH v4 1/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Date: Mon, 1 Jul 2013 15:21:50 +0530 Message-ID: <1372672313-4104-2-git-send-email-pekon@ti.com> X-Mailer: git-send-email 1.8.1 In-Reply-To: <1372672313-4104-1-git-send-email-pekon@ti.com> References: <1372672313-4104-1-git-send-email-pekon@ti.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130701_055241_159487_EC18A81C X-CRM114-Status: GOOD ( 26.27 ) X-Spam-Score: -6.9 (------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-6.9 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [198.47.26.153 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: arnd@arndb.de, avinashphilipk@gmail.com, jp.francois@cynove.com, balbi@ti.com, linux-mtd@lists.infradead.org, Pekon Gupta , linux-omap@vger.kernel.org X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org ECC scheme on NAND devices can be implemented in multiple ways.Some using Software algorithm, while others using in-build Hardware engines. omap2-nand driver currently supports following flavours of ECC schemes. +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAMMING_CODE_DEFAULT |S/W |S/W | |OMAP_ECC_HAMMING_CODE_HW |H/W (GPMC) |S/W | |OMAP_ECC_HAMMING_CODE_HW_ROMCODE |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |(requires CONFIG_MTD_NAND_ECC_BCH) | | | |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |(requires CONFIG_MTD_NAND_OMAP_BCH) | | | |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | +---------------------------------------+---------------+---------------+ This patch - separates the configurations for various ECC schemes. - fixes dependency issues based on Kconfig options. - cleans up redundant code Signed-off-by: Pekon Gupta --- drivers/mtd/nand/omap2.c | 504 +++++++++++++++++++------------------- include/linux/platform_data/elm.h | 4 + 2 files changed, 252 insertions(+), 256 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index daa3dfc..c4c7e0d 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -25,8 +25,10 @@ #include #include -#ifdef CONFIG_MTD_NAND_OMAP_BCH +#ifdef CONFIG_MTD_NAND_ECC_BCH #include +#endif +#ifdef CONFIG_MTD_NAND_OMAP_BCH #include #endif @@ -141,6 +143,9 @@ #define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */ #define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */ +#define BADBLOCK_MARKER_LENGTH 0x2 +#define OMAP_ECC_BCH8_POLYNOMIAL 0x201b + #ifdef CONFIG_MTD_NAND_OMAP_BCH static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; @@ -182,14 +187,11 @@ struct omap_nand_info { u_char *buf; int buf_len; struct gpmc_nand_regs reg; - -#ifdef CONFIG_MTD_NAND_OMAP_BCH - struct bch_control *bch; - struct nand_ecclayout ecclayout; + /* fields specific for BCHx_HW ECC scheme */ + struct bch_control *bch; bool is_elm_used; struct device *elm_dev; struct device_node *of_node; -#endif }; /** @@ -1058,8 +1060,6 @@ static int omap_dev_ready(struct mtd_info *mtd) } } -#ifdef CONFIG_MTD_NAND_OMAP_BCH - /** * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction * @mtd: MTD device structure @@ -1141,6 +1141,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); } +#ifdef CONFIG_MTD_NAND_ECC_BCH /** * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes * @mtd: MTD device structure @@ -1227,6 +1228,62 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat, } /** + * omap3_correct_data_bch - Decode received data and correct errors + * @mtd: MTD device structure + * @data: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + */ +static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, + u_char *read_ecc, u_char *calc_ecc) +{ + int i, count; + /* cannot correct more than 8 errors */ + unsigned int errloc[8]; + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + + count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL, + errloc); + if (count > 0) { + /* correct errors */ + for (i = 0; i < count; i++) { + /* correct data only, not ecc bytes */ + if (errloc[i] < 8*512) + data[errloc[i]/8] ^= 1 << (errloc[i] & 7); + pr_debug("corrected bitflip %u\n", errloc[i]); + } + } else if (count < 0) { + pr_err("ecc unrecoverable error\n"); + } + return count; +} + +/** + * omap3_free_bch - Release BCH ecc resources + * @mtd: MTD device structure + */ +static void omap3_free_bch(struct mtd_info *mtd) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + if (info->bch) { + free_bch(info->bch); + info->bch = NULL; + } +} + +#else + +static void omap3_free_bch(struct mtd_info *mtd) +{ +} + +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + + +#ifdef CONFIG_MTD_NAND_OMAP_BCH +/** * omap3_calculate_ecc_bch - Generate bytes of ECC bytes * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed @@ -1519,38 +1576,6 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data, } /** - * omap3_correct_data_bch - Decode received data and correct errors - * @mtd: MTD device structure - * @data: page data - * @read_ecc: ecc read from nand flash - * @calc_ecc: ecc read from HW ECC registers - */ -static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data, - u_char *read_ecc, u_char *calc_ecc) -{ - int i, count; - /* cannot correct more than 8 errors */ - unsigned int errloc[8]; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - - count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL, - errloc); - if (count > 0) { - /* correct errors */ - for (i = 0; i < count; i++) { - /* correct data only, not ecc bytes */ - if (errloc[i] < 8*512) - data[errloc[i]/8] ^= 1 << (errloc[i] & 7); - pr_debug("corrected bitflip %u\n", errloc[i]); - } - } else if (count < 0) { - pr_err("ecc unrecoverable error\n"); - } - return count; -} - -/** * omap_write_page_bch - BCH ecc based write page function for entire page * @mtd: mtd info structure * @chip: nand chip info structure @@ -1637,197 +1662,47 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } /** - * omap3_free_bch - Release BCH ecc resources - * @mtd: MTD device structure - */ -static void omap3_free_bch(struct mtd_info *mtd) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - if (info->bch) { - free_bch(info->bch); - info->bch = NULL; - } -} - -/** - * omap3_init_bch - Initialize BCH ECC - * @mtd: MTD device structure - * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW) + * is_elm_present - checks for presence of ELM module by scanning DT nodes + * @omap_nand_info: NAND device structure containing platform data + * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16 */ -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) +static int is_elm_present(struct omap_nand_info *info, int bch_type) { - int max_errors; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); -#ifdef CONFIG_MTD_NAND_OMAP_BCH8 - const int hw_errors = BCH8_MAX_ERROR; -#else - const int hw_errors = BCH4_MAX_ERROR; -#endif - enum bch_ecc bch_type; const __be32 *parp; int lenp; struct device_node *elm_node; - - info->bch = NULL; - - max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? - BCH8_MAX_ERROR : BCH4_MAX_ERROR; - if (max_errors != hw_errors) { - pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported", - max_errors, hw_errors); - goto fail; - } - - info->nand.ecc.size = 512; - info->nand.ecc.hwctl = omap3_enable_hwecc_bch; - info->nand.ecc.mode = NAND_ECC_HW; - info->nand.ecc.strength = max_errors; - - if (hw_errors == BCH8_MAX_ERROR) - bch_type = BCH8_ECC; - else - bch_type = BCH4_ECC; + struct platform_device *pdev; + info->is_elm_used = false; /* Detect availability of ELM module */ parp = of_get_property(info->of_node, "elm_id", &lenp); if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) { pr_err("Missing elm_id property, fall back to Software BCH\n"); - info->is_elm_used = false; } else { - struct platform_device *pdev; - elm_node = of_find_node_by_phandle(be32_to_cpup(parp)); pdev = of_find_device_by_node(elm_node); info->elm_dev = &pdev->dev; - - if (elm_config(info->elm_dev, bch_type) == 0) - info->is_elm_used = true; - } - - if (info->is_elm_used && (mtd->writesize <= 4096)) { - - if (hw_errors == BCH8_MAX_ERROR) - info->nand.ecc.bytes = BCH8_SIZE; - else - info->nand.ecc.bytes = BCH4_SIZE; - - info->nand.ecc.correct = omap_elm_correct_data; - info->nand.ecc.calculate = omap3_calculate_ecc_bch; - info->nand.ecc.read_page = omap_read_page_bch; - info->nand.ecc.write_page = omap_write_page_bch; - } else { - /* - * software bch library is only used to detect and - * locate errors - */ - info->bch = init_bch(13, max_errors, - 0x201b /* hw polynomial */); - if (!info->bch) - goto fail; - - info->nand.ecc.correct = omap3_correct_data_bch; - - /* - * The number of corrected errors in an ecc block that will - * trigger block scrubbing defaults to the ecc strength (4 or 8) - * Set mtd->bitflip_threshold here to define a custom threshold. - */ - - if (max_errors == 8) { - info->nand.ecc.bytes = 13; - info->nand.ecc.calculate = omap3_calculate_ecc_bch8; - } else { - info->nand.ecc.bytes = 7; - info->nand.ecc.calculate = omap3_calculate_ecc_bch4; - } - } - - pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); - return 0; -fail: - omap3_free_bch(mtd); - return -1; -} - -/** - * omap3_init_bch_tail - Build an oob layout for BCH ECC correction. - * @mtd: MTD device structure - */ -static int omap3_init_bch_tail(struct mtd_info *mtd) -{ - int i, steps, offset; - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - struct nand_ecclayout *layout = &info->ecclayout; - - /* build oob layout */ - steps = mtd->writesize/info->nand.ecc.size; - layout->eccbytes = steps*info->nand.ecc.bytes; - - /* do not bother creating special oob layouts for small page devices */ - if (mtd->oobsize < 64) { - pr_err("BCH ecc is not supported on small page devices\n"); - goto fail; - } - - /* reserve 2 bytes for bad block marker */ - if (layout->eccbytes+2 > mtd->oobsize) { - pr_err("no oob layout available for oobsize %d eccbytes %u\n", - mtd->oobsize, layout->eccbytes); - goto fail; + /* ELM module available, now configure it */ + elm_config(info->elm_dev, bch_type); + info->is_elm_used = true; + return 0; } - /* ECC layout compatible with RBL for BCH8 */ - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - offset = 2; - else - offset = mtd->oobsize - layout->eccbytes; - - /* put ecc bytes at oob tail */ - for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = offset + i; - - if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) - layout->oobfree[0].offset = 2 + layout->eccbytes * steps; - else - layout->oobfree[0].offset = 2; - - layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; - info->nand.ecc.layout = layout; - - if (!(info->nand.options & NAND_BUSWIDTH_16)) - info->nand.badblock_pattern = &bb_descrip_flashbased; - return 0; -fail: - omap3_free_bch(mtd); - return -1; -} - -#else -static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) -{ - pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n"); - return -1; -} -static int omap3_init_bch_tail(struct mtd_info *mtd) -{ - return -1; -} -static void omap3_free_bch(struct mtd_info *mtd) -{ + return -ENODEV; } #endif /* CONFIG_MTD_NAND_OMAP_BCH */ + static int omap_nand_probe(struct platform_device *pdev) { struct omap_nand_info *info; struct omap_nand_platform_data *pdata; + struct mtd_info *mtd; + struct nand_chip *chip; int err; - int i, offset; - dma_cap_mask_t mask; - unsigned sig; + int i; + dma_cap_mask_t mask; + unsigned sig; struct resource *res; struct mtd_part_parser_data ppdata = {}; @@ -1846,16 +1721,18 @@ static int omap_nand_probe(struct platform_device *pdev) spin_lock_init(&info->controller.lock); init_waitqueue_head(&info->controller.wq); - info->pdev = pdev; + mtd = &info->mtd; + mtd->name = dev_name(&pdev->dev); + mtd->owner = THIS_MODULE; + mtd->priv = &info->nand; + chip = mtd->priv; + info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; + info->bch = NULL; - info->mtd.priv = &info->nand; - info->mtd.name = dev_name(&pdev->dev); - info->mtd.owner = THIS_MODULE; - - info->nand.options = pdata->devsize; + info->nand.options = NAND_BUSWIDTH_AUTO; info->nand.options |= NAND_SKIP_BBTSCAN; #ifdef CONFIG_MTD_NAND_OMAP_BCH info->of_node = pdata->of_node; @@ -1903,6 +1780,31 @@ static int omap_nand_probe(struct platform_device *pdev) info->nand.chip_delay = 50; } + /* scan NAND device conncted to controller */ + if (nand_scan_ident(mtd, 1, NULL)) { + err = -ENXIO; + goto out_release_mem_region; + } + pr_info("%s: detected %s NAND flash\n", DRIVER_NAME, + (info->nand.options & NAND_BUSWIDTH_16) ? "x16" : "x8"); + if ((info->nand.options & NAND_BUSWIDTH_16) != + (pdata->devsize & NAND_BUSWIDTH_16)) { + pr_err("%s: but incorrectly configured as %s", DRIVER_NAME, + (pdata->devsize & NAND_BUSWIDTH_16) ? "x16" : "x8"); + err = -EINVAL; + goto out_release_mem_region; + } + + /* check for small page devices */ + if ((mtd->oobsize < 64) && + (pdata->ecc_opt != OMAP_ECC_HAMMING_CODE_DEFAULT) && + (pdata->ecc_opt != OMAP_ECC_HAMMING_CODE_HW)) { + pr_err("small page devices are not supported\n"); + err = -EINVAL; + goto out_release_mem_region; + } + + /* populate read & write API based on xfer_type selected */ switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: info->nand.read_buf = omap_read_buf_pref; @@ -1992,66 +1894,154 @@ static int omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - /* select the ecc type */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT) - info->nand.ecc.mode = NAND_ECC_SOFT; - else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { + /* populate MTD interface based on ECC scheme */ + switch (pdata->ecc_opt) { + case OMAP_ECC_HAMMING_CODE_DEFAULT: + pr_info("using OMAP_ECC_HAMMING_CODE_DEFAULT ECC scheme\n"); + info->nand.ecc.mode = NAND_ECC_SOFT; + goto generic_ecc_layout; + + case OMAP_ECC_HAMMING_CODE_HW: + pr_info("using OMAP_ECC_HAMMING_CODE_HW ECC scheme\n"); + info->nand.ecc.mode = NAND_ECC_HW; info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; info->nand.ecc.strength = 1; info->nand.ecc.calculate = omap_calculate_ecc; info->nand.ecc.hwctl = omap_enable_hwecc; info->nand.ecc.correct = omap_correct_data; + goto generic_ecc_layout; + + case OMAP_ECC_HAMMING_CODE_HW_ROMCODE: + pr_info("using OMAP_ECC_HAMMING_CODE_HW_ROMCODE ECC scheme\n"); info->nand.ecc.mode = NAND_ECC_HW; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - err = omap3_init_bch(&info->mtd, pdata->ecc_opt); - if (err) { + info->nand.ecc.bytes = 3; + info->nand.ecc.size = 512; + info->nand.ecc.strength = 1; + info->nand.ecc.calculate = omap_calculate_ecc; + info->nand.ecc.hwctl = omap_enable_hwecc; + info->nand.ecc.correct = omap_correct_data; + /* define custom ECC layout */ + omap_oobinfo.eccbytes = info->nand.ecc.bytes * + (mtd->writesize / + info->nand.ecc.size); + if (info->nand.options & NAND_BUSWIDTH_16) + omap_oobinfo.eccpos[0] = BADBLOCK_MARKER_LENGTH; + else + omap_oobinfo.eccpos[0] = 1; + omap_oobinfo.oobfree->offset = omap_oobinfo.eccpos[0] + + omap_oobinfo.eccbytes; + goto custom_ecc_layout; + +#ifdef CONFIG_MTD_NAND_OMAP_BCH + case OMAP_ECC_BCH8_CODE_HW: + pr_info("using OMAP_ECC_BCH8_CODE_HW ECC scheme\n"); + if (is_elm_present(info, ECC_TYPE_BCH8) < 0) { + pr_err("ELM module not detected, required for ECC\n"); err = -EINVAL; goto out_release_mem_region; } - } - - /* DIP switches on some boards change between 8 and 16 bit - * bus widths for flash. Try the other width if the first try fails. - */ - if (nand_scan_ident(&info->mtd, 1, NULL)) { - info->nand.options ^= NAND_BUSWIDTH_16; - if (nand_scan_ident(&info->mtd, 1, NULL)) { - err = -ENXIO; + info->nand.ecc.mode = NAND_ECC_HW; + info->nand.ecc.size = 512; + /* 14th bit is kept reserved for ROM-code compatibility */ + info->nand.ecc.bytes = 13 + 1; + info->nand.ecc.strength = 8; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.correct = omap_elm_correct_data; + info->nand.ecc.calculate = omap3_calculate_ecc_bch; + info->nand.ecc.read_page = omap_read_page_bch; + info->nand.ecc.write_page = omap_write_page_bch; + /* define custom ECC layout */ + omap_oobinfo.eccbytes = info->nand.ecc.bytes * + (mtd->writesize / + info->nand.ecc.size); + omap_oobinfo.eccpos[0] = BADBLOCK_MARKER_LENGTH; + omap_oobinfo.oobfree->offset = omap_oobinfo.eccpos[0] + + omap_oobinfo.eccbytes; + goto custom_ecc_layout; +#endif +#ifdef CONFIG_MTD_NAND_ECC_BCH + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + pr_info("using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW ECC\n"); + info->nand.ecc.mode = NAND_ECC_HW; + info->nand.ecc.size = 512; + info->nand.ecc.bytes = 13; + info->nand.ecc.strength = 8; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.correct = omap3_correct_data_bch; + info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + /* define custom ECC layout */ + omap_oobinfo.eccbytes = info->nand.ecc.bytes * + (mtd->writesize / + info->nand.ecc.size); + omap_oobinfo.eccpos[0] = info->mtd.oobsize - + omap_oobinfo.eccbytes; + omap_oobinfo.oobfree->offset = BADBLOCK_MARKER_LENGTH; + /* software bch library is used for locating errors */ + info->bch = init_bch(info->nand.ecc.bytes, + info->nand.ecc.strength, + OMAP_ECC_BCH8_POLYNOMIAL); + if (!info->bch) { + pr_err("unable initialize S/W BCH logic\n"); + err = -EINVAL; goto out_release_mem_region; } - } - - /* rom code layout */ - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) { - - if (info->nand.options & NAND_BUSWIDTH_16) - offset = 2; - else { - offset = 1; - info->nand.badblock_pattern = &bb_descrip_flashbased; - } - omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16); - for (i = 0; i < omap_oobinfo.eccbytes; i++) - omap_oobinfo.eccpos[i] = i+offset; - - omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes; - omap_oobinfo.oobfree->length = info->mtd.oobsize - - (offset + omap_oobinfo.eccbytes); - - info->nand.ecc.layout = &omap_oobinfo; - } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) || - (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) { - /* build OOB layout for BCH ECC correction */ - err = omap3_init_bch_tail(&info->mtd); - if (err) { + goto custom_ecc_layout; + + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + pr_info("using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ECC\n"); + info->nand.ecc.mode = NAND_ECC_HW; + info->nand.ecc.size = 512; + info->nand.ecc.bytes = 7; + info->nand.ecc.strength = 4; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.correct = omap3_correct_data_bch; + info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + /* define custom ECC layout */ + omap_oobinfo.eccbytes = info->nand.ecc.bytes * + (mtd->writesize / + info->nand.ecc.size); + omap_oobinfo.eccpos[0] = info->mtd.oobsize - + omap_oobinfo.eccbytes; + omap_oobinfo.oobfree->offset = BADBLOCK_MARKER_LENGTH; + /* software bch library is used for locating errors */ + info->bch = init_bch(info->nand.ecc.bytes, + info->nand.ecc.strength, + OMAP_ECC_BCH8_POLYNOMIAL); + if (!info->bch) { + pr_err("unable initialize S/W BCH logic\n"); err = -EINVAL; goto out_release_mem_region; } + goto custom_ecc_layout; +#endif + default: + pr_err("selected ECC scheme not supported or not enabled\n"); + err = -EINVAL; + goto out_release_mem_region; + } + +custom_ecc_layout: + /* populate remaining info for custom ecc layout */ + pr_info("%s: using custom ecc layout\n", DRIVER_NAME); + omap_oobinfo.oobfree->length = mtd->oobsize - BADBLOCK_MARKER_LENGTH + - omap_oobinfo.eccbytes; + if (!(info->nand.options & NAND_BUSWIDTH_16)) + info->nand.badblock_pattern = &bb_descrip_flashbased; + for (i = 1; i < omap_oobinfo.eccbytes; i++) + omap_oobinfo.eccpos[i] = omap_oobinfo.eccpos[0] + i; + + /* check if NAND OOBSIZE meets ECC scheme requirement */ + if (mtd->oobsize < (omap_oobinfo.eccbytes + + BADBLOCK_MARKER_LENGTH)) { + pr_err("not enough OOB bytes required = %d, available=%d\n", + mtd->oobsize, omap_oobinfo.eccbytes); + err = -EINVAL; + goto out_release_mem_region; } + info->nand.ecc.layout = &omap_oobinfo; +generic_ecc_layout: /* second phase scan */ if (nand_scan_tail(&info->mtd)) { err = -ENXIO; @@ -2075,11 +2065,13 @@ out_release_mem_region: free_irq(info->gpmc_irq_fifo, info); release_mem_region(info->phys_base, info->mem_size); out_free_info: + omap3_free_bch(&info->mtd); kfree(info); return err; } + static int omap_nand_remove(struct platform_device *pdev) { struct mtd_info *mtd = platform_get_drvdata(pdev); diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index bf0a83b..5e36e42 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -23,6 +23,10 @@ enum bch_ecc { BCH8_ECC, }; +#define ECC_TYPE_BCH4 (0x0 << 0) +#define ECC_TYPE_BCH8 (0x1 << 0) +#define ECC_TYPE_BCH16 (0x2 << 0) + /* ELM support 8 error syndrome process */ #define ERROR_VECTOR_MAX 8