Patchwork [v3] linux-user: improve target_to_host_sock_type conversion

login
register
mail settings
Submitter Petar Jovanovic
Date July 1, 2013, 12:44 a.m.
Message ID <1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com>
Download mbox | patch
Permalink /patch/255998/
State New
Headers show

Comments

Petar Jovanovic - July 1, 2013, 12:44 a.m.
From: Petar Jovanovic <petar.jovanovic@imgtec.com>

Previous implementation has failed to take into account different value of
SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC.
The same conversion has to be applied both for do_socket and do_socketpair,
so the code has been isolated in a static inline function.

enum sock_type in linux-user/socket.h has been extended to include
TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc.
The patch also includes necessary code style changes (tab to spaces) in the
header file since most of the file has been touched by this change.

Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
---
 v3:

 - define TARGET_SOCK_* for the architectures that do not define
   ARCH_HAS_SOCKET_TYPES

 v2:

 - the patch defines ARCH_HAS_SOCKET_TYPES for MIPS, SPARC and ALPHA
 - values for sock_type are defined for SPARC and ALPHA in socket.h

 linux-user/socket.h  |  381 +++++++++++++++++++++++++++++++++-----------------
 linux-user/syscall.c |   43 +++---
 2 files changed, 275 insertions(+), 149 deletions(-)
Peter Maydell - July 2, 2013, 1:44 p.m.
On 1 July 2013 01:44, Petar Jovanovic <petar.jovanovic@rt-rk.com> wrote:
> The patch also includes necessary code style changes (tab to spaces) in the
> header file since most of the file has been touched by this change.

This makes it pretty painful to review because of all the "not actually
changing anything" changes. If you want to fix up indent on an entire
file that would be better as a single patch on its own before this
one; then it's easy to check that that has no actual code change,
and the patch with the code changes is smaller and easier to read.

(The general rule of thumb is "if you're just changing a few lines
of indent/braces in lines that the patch touches anyway" that's fine;
larger scale changes go in their own patch if we do them at all.)

Not using the same base as the kernel (hex vs octal) made checking
the values a bit tedious too, but I think they're all correct.

That said,
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

-- PMM
Petar Jovanovic - July 2, 2013, 2:13 p.m.

Peter Maydell - July 2, 2013, 4:34 p.m.
On 2 July 2013 15:13, Petar Jovanovic <Petar.Jovanovic@imgtec.com> wrote:
> Yet, I ended up changing 80% of the header file with this version, so I
> was under impression it makes sense to change the remaining 20%.

Yeah, that's fine -- but once you get to that scale of change it's
nicer to have patch 1/2 fix formatting, patch 2/2 actual change.
(Just a note for next time at this point, though.)

>> Not using the same base as the kernel (hex vs octal) made checking
>> the values a bit tedious too, but I think they're all correct.
>
> What values are you refering to?

arch/sparc/include/uapi/asm/fcntl.h:#define O_CLOEXEC   0x400000
arch/alpha/include/asm/socket.h:#define SOCK_NONBLOCK   0x40000000
arch/mips/include/uapi/asm/fcntl.h:#define O_NONBLOCK   0x0080
arch/sparc/include/uapi/asm/fcntl.h:#define O_NONBLOCK  0x4000

thanks
-- PMM
Petar Jovanovic - July 2, 2013, 9:43 p.m.

Petar Jovanovic - July 8, 2013, 9:12 a.m.
ping
http://patchwork.ozlabs.org/patch/255998/

Riku, can you integrate this change?
Thank you.

Petar

Patch

diff --git a/linux-user/socket.h b/linux-user/socket.h
index 339cae5..ae17959 100644
--- a/linux-user/socket.h
+++ b/linux-user/socket.h
@@ -1,91 +1,104 @@ 
 
 #if defined(TARGET_MIPS)
-	// MIPS special values for constants
-
-	/*
-	 * For setsockopt(2)
-	 *
-	 * This defines are ABI conformant as far as Linux supports these ...
-	 */
-	#define TARGET_SOL_SOCKET      0xffff
-
-	#define TARGET_SO_DEBUG        0x0001  /* Record debugging information.  */
-	#define TARGET_SO_REUSEADDR    0x0004  /* Allow reuse of local addresses.  */
-	#define TARGET_SO_KEEPALIVE    0x0008  /* Keep connections alive and send
-					  SIGPIPE when they die.  */
-	#define TARGET_SO_DONTROUTE    0x0010  /* Don't do local routing.  */
-	#define TARGET_SO_BROADCAST    0x0020  /* Allow transmission of
-					  broadcast messages.  */
-	#define TARGET_SO_LINGER       0x0080  /* Block on close of a reliable
-					  socket to transmit pending data.  */
-	#define TARGET_SO_OOBINLINE 0x0100     /* Receive out-of-band data in-band.  */
-	#if 0
-	To add: #define TARGET_SO_REUSEPORT 0x0200     /* Allow local address and port reuse.  */
-	#endif
-
-	#define TARGET_SO_TYPE         0x1008  /* Compatible name for SO_STYLE.  */
-	#define TARGET_SO_STYLE        SO_TYPE /* Synonym */
-	#define TARGET_SO_ERROR        0x1007  /* get error status and clear */
-	#define TARGET_SO_SNDBUF       0x1001  /* Send buffer size. */
-	#define TARGET_SO_RCVBUF       0x1002  /* Receive buffer. */
-	#define TARGET_SO_SNDLOWAT     0x1003  /* send low-water mark */
-	#define TARGET_SO_RCVLOWAT     0x1004  /* receive low-water mark */
-	#define TARGET_SO_SNDTIMEO     0x1005  /* send timeout */
-	#define TARGET_SO_RCVTIMEO     0x1006  /* receive timeout */
-	#define TARGET_SO_ACCEPTCONN   0x1009
-
-	/* linux-specific, might as well be the same as on i386 */
-	#define TARGET_SO_NO_CHECK     11
-	#define TARGET_SO_PRIORITY     12
-	#define TARGET_SO_BSDCOMPAT    14
-
-	#define TARGET_SO_PASSCRED     17
-	#define TARGET_SO_PEERCRED     18
-
-	/* Security levels - as per NRL IPv6 - don't actually do anything */
-	#define TARGET_SO_SECURITY_AUTHENTICATION              22
-	#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
-	#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
-
-	#define TARGET_SO_BINDTODEVICE         25
-
-	/* Socket filtering */
-	#define TARGET_SO_ATTACH_FILTER        26
-	#define TARGET_SO_DETACH_FILTER        27
-
-	#define TARGET_SO_PEERNAME             28
-	#define TARGET_SO_TIMESTAMP            29
-	#define SCM_TIMESTAMP          SO_TIMESTAMP
-
-	#define TARGET_SO_PEERSEC              30
-	#define TARGET_SO_SNDBUFFORCE          31
-	#define TARGET_SO_RCVBUFFORCE          33
-
-	/** sock_type - Socket types
-	 *
-	 * Please notice that for binary compat reasons MIPS has to
-	 * override the enum sock_type in include/linux/net.h, so
-	 * we define ARCH_HAS_SOCKET_TYPES here.
-	 *
-	 * @SOCK_DGRAM - datagram (conn.less) socket
-	 * @SOCK_STREAM - stream (connection) socket
-	 * @SOCK_RAW - raw socket
-	 * @SOCK_RDM - reliably-delivered message
-	 * @SOCK_SEQPACKET - sequential packet socket
-	 * @SOCK_PACKET - linux specific way of getting packets at the dev level.
-	 *               For writing rarp and other similar things on the user level.
-	 */
-	enum sock_type {
-	       TARGET_SOCK_DGRAM       = 1,
-	       TARGET_SOCK_STREAM      = 2,
-	       TARGET_SOCK_RAW = 3,
-	       TARGET_SOCK_RDM = 4,
-	       TARGET_SOCK_SEQPACKET   = 5,
-	       TARGET_SOCK_DCCP        = 6,
-	       TARGET_SOCK_PACKET      = 10,
-	};
-
-	#define TARGET_SOCK_MAX (SOCK_PACKET + 1)
+    /* MIPS special values for constants */
+
+    /*
+     * For setsockopt(2)
+     *
+     * This defines are ABI conformant as far as Linux supports these ...
+     */
+    #define TARGET_SOL_SOCKET      0xffff
+
+    #define TARGET_SO_DEBUG        0x0001  /* Record debugging information. */
+    #define TARGET_SO_REUSEADDR    0x0004  /* Allow reuse of local addresses. */
+    #define TARGET_SO_KEEPALIVE    0x0008  /* Keep connections alive and send
+                                              SIGPIPE when they die. */
+    #define TARGET_SO_DONTROUTE    0x0010  /* Don't do local routing. */
+    #define TARGET_SO_BROADCAST    0x0020  /* Allow transmission of
+                                              broadcast messages. */
+    #define TARGET_SO_LINGER       0x0080  /* Block on close of a reliable
+                                            * socket to transmit pending data.
+                                            */
+    #define TARGET_SO_OOBINLINE 0x0100     /* Receive out-of-band data in-band.
+                                            */
+    #if 0
+    /* To add: Allow local address and port reuse. */
+    #define TARGET_SO_REUSEPORT 0x0200
+    #endif
+
+    #define TARGET_SO_TYPE         0x1008  /* Compatible name for SO_STYLE. */
+    #define TARGET_SO_STYLE        SO_TYPE /* Synonym */
+    #define TARGET_SO_ERROR        0x1007  /* get error status and clear */
+    #define TARGET_SO_SNDBUF       0x1001  /* Send buffer size. */
+    #define TARGET_SO_RCVBUF       0x1002  /* Receive buffer. */
+    #define TARGET_SO_SNDLOWAT     0x1003  /* send low-water mark */
+    #define TARGET_SO_RCVLOWAT     0x1004  /* receive low-water mark */
+    #define TARGET_SO_SNDTIMEO     0x1005  /* send timeout */
+    #define TARGET_SO_RCVTIMEO     0x1006  /* receive timeout */
+    #define TARGET_SO_ACCEPTCONN   0x1009
+
+    /* linux-specific, might as well be the same as on i386 */
+    #define TARGET_SO_NO_CHECK     11
+    #define TARGET_SO_PRIORITY     12
+    #define TARGET_SO_BSDCOMPAT    14
+
+    #define TARGET_SO_PASSCRED     17
+    #define TARGET_SO_PEERCRED     18
+
+    /* Security levels - as per NRL IPv6 - don't actually do anything */
+    #define TARGET_SO_SECURITY_AUTHENTICATION              22
+    #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
+    #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+
+    #define TARGET_SO_BINDTODEVICE         25
+
+    /* Socket filtering */
+    #define TARGET_SO_ATTACH_FILTER        26
+    #define TARGET_SO_DETACH_FILTER        27
+
+    #define TARGET_SO_PEERNAME             28
+    #define TARGET_SO_TIMESTAMP            29
+    #define SCM_TIMESTAMP          SO_TIMESTAMP
+
+    #define TARGET_SO_PEERSEC              30
+    #define TARGET_SO_SNDBUFFORCE          31
+    #define TARGET_SO_RCVBUFFORCE          33
+
+    /** sock_type - Socket types
+     *
+     * Please notice that for binary compat reasons MIPS has to
+     * override the enum sock_type in include/linux/net.h, so
+     * we define ARCH_HAS_SOCKET_TYPES here.
+     *
+     * @SOCK_DGRAM - datagram (conn.less) socket
+     * @SOCK_STREAM - stream (connection) socket
+     * @SOCK_RAW - raw socket
+     * @SOCK_RDM - reliably-delivered message
+     * @SOCK_SEQPACKET - sequential packet socket
+     * @SOCK_DCCP - Datagram Congestion Control Protocol socket
+     * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+     *                For writing rarp and other similar things on the user
+     *                level.
+     * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
+     * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
+     */
+
+    #define ARCH_HAS_SOCKET_TYPES          1
+
+    enum sock_type {
+           TARGET_SOCK_DGRAM       = 1,
+           TARGET_SOCK_STREAM      = 2,
+           TARGET_SOCK_RAW         = 3,
+           TARGET_SOCK_RDM         = 4,
+           TARGET_SOCK_SEQPACKET   = 5,
+           TARGET_SOCK_DCCP        = 6,
+           TARGET_SOCK_PACKET      = 10,
+           TARGET_SOCK_CLOEXEC     = 02000000,
+           TARGET_SOCK_NONBLOCK    = 0200,
+    };
+
+    #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
+    #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
 
 #elif defined(TARGET_ALPHA)
 
@@ -156,61 +169,167 @@ 
     /* Instruct lower device to use last 4-bytes of skb data as FCS */
     #define TARGET_SO_NOFCS     43
 
+    /** sock_type - Socket types
+     *
+     * Please notice that for binary compat reasons ALPHA has to
+     * override the enum sock_type in include/linux/net.h, so
+     * we define ARCH_HAS_SOCKET_TYPES here.
+     *
+     * @SOCK_DGRAM - datagram (conn.less) socket
+     * @SOCK_STREAM - stream (connection) socket
+     * @SOCK_RAW - raw socket
+     * @SOCK_RDM - reliably-delivered message
+     * @SOCK_SEQPACKET - sequential packet socket
+     * @SOCK_DCCP - Datagram Congestion Control Protocol socket
+     * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+     *                For writing rarp and other similar things on the user
+     *                level.
+     * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
+     * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
+     */
+
+    #define ARCH_HAS_SOCKET_TYPES          1
+
+    enum sock_type {
+           TARGET_SOCK_STREAM      = 1,
+           TARGET_SOCK_DGRAM       = 2,
+           TARGET_SOCK_RAW         = 3,
+           TARGET_SOCK_RDM         = 4,
+           TARGET_SOCK_SEQPACKET   = 5,
+           TARGET_SOCK_DCCP        = 6,
+           TARGET_SOCK_PACKET      = 10,
+           TARGET_SOCK_CLOEXEC     = 010000000,
+           TARGET_SOCK_NONBLOCK    = 010000000000,
+    };
+
+    #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
+    #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
 #else
 
-	/* For setsockopt(2) */
-	#define TARGET_SOL_SOCKET      1
-
-	#define TARGET_SO_DEBUG        1
-	#define TARGET_SO_REUSEADDR    2
-	#define TARGET_SO_TYPE         3
-	#define TARGET_SO_ERROR        4
-	#define TARGET_SO_DONTROUTE    5
-	#define TARGET_SO_BROADCAST    6
-	#define TARGET_SO_SNDBUF       7
-	#define TARGET_SO_RCVBUF       8
-	#define TARGET_SO_SNDBUFFORCE  32
-	#define TARGET_SO_RCVBUFFORCE  33
-	#define TARGET_SO_KEEPALIVE    9
-	#define TARGET_SO_OOBINLINE    10
-	#define TARGET_SO_NO_CHECK     11
-	#define TARGET_SO_PRIORITY     12
-	#define TARGET_SO_LINGER       13
-	#define TARGET_SO_BSDCOMPAT    14
-	/* To add :#define TARGET_SO_REUSEPORT 15 */
+#if defined(TARGET_SPARC)
+    /** sock_type - Socket types
+     *
+     * Please notice that for binary compat reasons SPARC has to
+     * override the enum sock_type in include/linux/net.h, so
+     * we define ARCH_HAS_SOCKET_TYPES here.
+     *
+     * @SOCK_DGRAM - datagram (conn.less) socket
+     * @SOCK_STREAM - stream (connection) socket
+     * @SOCK_RAW - raw socket
+     * @SOCK_RDM - reliably-delivered message
+     * @SOCK_SEQPACKET - sequential packet socket
+     * @SOCK_DCCP - Datagram Congestion Control Protocol socket
+     * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+     *                For writing rarp and other similar things on the user
+     *                level.
+     * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
+     * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
+     */
+
+    #define ARCH_HAS_SOCKET_TYPES          1
+
+    enum sock_type {
+           TARGET_SOCK_STREAM      = 1,
+           TARGET_SOCK_DGRAM       = 2,
+           TARGET_SOCK_RAW         = 3,
+           TARGET_SOCK_RDM         = 4,
+           TARGET_SOCK_SEQPACKET   = 5,
+           TARGET_SOCK_DCCP        = 6,
+           TARGET_SOCK_PACKET      = 10,
+           TARGET_SOCK_CLOEXEC     = 020000000,
+           TARGET_SOCK_NONBLOCK    = 040000,
+    };
+
+    #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
+    #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
+#endif
+
+    /* For setsockopt(2) */
+    #define TARGET_SOL_SOCKET      1
+
+    #define TARGET_SO_DEBUG        1
+    #define TARGET_SO_REUSEADDR    2
+    #define TARGET_SO_TYPE         3
+    #define TARGET_SO_ERROR        4
+    #define TARGET_SO_DONTROUTE    5
+    #define TARGET_SO_BROADCAST    6
+    #define TARGET_SO_SNDBUF       7
+    #define TARGET_SO_RCVBUF       8
+    #define TARGET_SO_SNDBUFFORCE  32
+    #define TARGET_SO_RCVBUFFORCE  33
+    #define TARGET_SO_KEEPALIVE    9
+    #define TARGET_SO_OOBINLINE    10
+    #define TARGET_SO_NO_CHECK     11
+    #define TARGET_SO_PRIORITY     12
+    #define TARGET_SO_LINGER       13
+    #define TARGET_SO_BSDCOMPAT    14
+    /* To add :#define TARGET_SO_REUSEPORT 15 */
 #if defined(TARGET_PPC)
-	#define TARGET_SO_RCVLOWAT     16
-	#define TARGET_SO_SNDLOWAT     17
-	#define TARGET_SO_RCVTIMEO     18
-	#define TARGET_SO_SNDTIMEO     19
-	#define TARGET_SO_PASSCRED     20
-	#define TARGET_SO_PEERCRED     21
+    #define TARGET_SO_RCVLOWAT     16
+    #define TARGET_SO_SNDLOWAT     17
+    #define TARGET_SO_RCVTIMEO     18
+    #define TARGET_SO_SNDTIMEO     19
+    #define TARGET_SO_PASSCRED     20
+    #define TARGET_SO_PEERCRED     21
 #else
-	#define TARGET_SO_PASSCRED     16
-	#define TARGET_SO_PEERCRED     17
-	#define TARGET_SO_RCVLOWAT     18
-	#define TARGET_SO_SNDLOWAT     19
-	#define TARGET_SO_RCVTIMEO     20
-	#define TARGET_SO_SNDTIMEO     21
+    #define TARGET_SO_PASSCRED     16
+    #define TARGET_SO_PEERCRED     17
+    #define TARGET_SO_RCVLOWAT     18
+    #define TARGET_SO_SNDLOWAT     19
+    #define TARGET_SO_RCVTIMEO     20
+    #define TARGET_SO_SNDTIMEO     21
 #endif
 
-	/* Security levels - as per NRL IPv6 - don't actually do anything */
-	#define TARGET_SO_SECURITY_AUTHENTICATION              22
-	#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
-	#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+    /* Security levels - as per NRL IPv6 - don't actually do anything */
+    #define TARGET_SO_SECURITY_AUTHENTICATION              22
+    #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
+    #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
 
-	#define TARGET_SO_BINDTODEVICE 25
+    #define TARGET_SO_BINDTODEVICE 25
 
-	/* Socket filtering */
-	#define TARGET_SO_ATTACH_FILTER        26
-	#define TARGET_SO_DETACH_FILTER        27
+    /* Socket filtering */
+    #define TARGET_SO_ATTACH_FILTER        26
+    #define TARGET_SO_DETACH_FILTER        27
+
+    #define TARGET_SO_PEERNAME             28
+    #define TARGET_SO_TIMESTAMP            29
+    #define TARGET_SCM_TIMESTAMP           TARGET_SO_TIMESTAMP
 
-	#define TARGET_SO_PEERNAME             28
-	#define TARGET_SO_TIMESTAMP            29
-	#define TARGET_SCM_TIMESTAMP           TARGET_SO_TIMESTAMP
+    #define TARGET_SO_ACCEPTCONN           30
 
-	#define TARGET_SO_ACCEPTCONN           30
+    #define TARGET_SO_PEERSEC              31
+
+#endif
 
-	#define TARGET_SO_PEERSEC              31
+#ifndef ARCH_HAS_SOCKET_TYPES
+    /** sock_type - Socket types - default values
+     *
+     *
+     * @SOCK_STREAM - stream (connection) socket
+     * @SOCK_DGRAM - datagram (conn.less) socket
+     * @SOCK_RAW - raw socket
+     * @SOCK_RDM - reliably-delivered message
+     * @SOCK_SEQPACKET - sequential packet socket
+     * @SOCK_DCCP - Datagram Congestion Control Protocol socket
+     * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+     *                For writing rarp and other similar things on the user
+     *                level.
+     * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
+     * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
+     */
+    enum sock_type {
+           TARGET_SOCK_STREAM      = 1,
+           TARGET_SOCK_DGRAM       = 2,
+           TARGET_SOCK_RAW         = 3,
+           TARGET_SOCK_RDM         = 4,
+           TARGET_SOCK_SEQPACKET   = 5,
+           TARGET_SOCK_DCCP        = 6,
+           TARGET_SOCK_PACKET      = 10,
+           TARGET_SOCK_CLOEXEC     = 02000000,
+           TARGET_SOCK_NONBLOCK    = 04000,
+    };
+
+    #define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
+    #define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
 
 #endif
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index cdd0c28..a7ad018 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -1696,31 +1696,36 @@  static void unlock_iovec(struct iovec *vec, abi_ulong target_addr,
     free(vec);
 }
 
-/* do_socket() Must return target values and target errnos. */
-static abi_long do_socket(int domain, int type, int protocol)
+static inline void target_to_host_sock_type(int *type)
 {
-#if defined(TARGET_MIPS)
-    switch(type) {
+    int host_type = 0;
+    int target_type = *type;
+
+    switch (target_type & TARGET_SOCK_TYPE_MASK) {
     case TARGET_SOCK_DGRAM:
-        type = SOCK_DGRAM;
+        host_type = SOCK_DGRAM;
         break;
     case TARGET_SOCK_STREAM:
-        type = SOCK_STREAM;
-        break;
-    case TARGET_SOCK_RAW:
-        type = SOCK_RAW;
+        host_type = SOCK_STREAM;
         break;
-    case TARGET_SOCK_RDM:
-        type = SOCK_RDM;
-        break;
-    case TARGET_SOCK_SEQPACKET:
-        type = SOCK_SEQPACKET;
-        break;
-    case TARGET_SOCK_PACKET:
-        type = SOCK_PACKET;
+    default:
+        host_type = target_type & TARGET_SOCK_TYPE_MASK;
         break;
     }
-#endif
+    if (target_type & TARGET_SOCK_CLOEXEC) {
+        host_type |= SOCK_CLOEXEC;
+    }
+    if (target_type & TARGET_SOCK_NONBLOCK) {
+        host_type |= SOCK_NONBLOCK;
+    }
+    *type = host_type;
+}
+
+/* do_socket() Must return target values and target errnos. */
+static abi_long do_socket(int domain, int type, int protocol)
+{
+    target_to_host_sock_type(&type);
+
     if (domain == PF_NETLINK)
         return -EAFNOSUPPORT; /* do not NETLINK socket connections possible */
     return get_errno(socket(domain, type, protocol));
@@ -1953,6 +1958,8 @@  static abi_long do_socketpair(int domain, int type, int protocol,
     int tab[2];
     abi_long ret;
 
+    target_to_host_sock_type(&type);
+
     ret = get_errno(socketpair(domain, type, protocol, tab));
     if (!is_error(ret)) {
         if (put_user_s32(tab[0], target_tab_addr)